Genius Craftsman Make Wheel Wrench From old Axle Rod in manufactory
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- Genius Craftsman Make Wheel Wrench From old Axle Rod in manufactory
#Geniuscraftsmanwheelwrench
#Wheelwrenchaxlemaking
#wheelspannerproduction
#howtomakewheelspanner
#wheelwrenchmanufacturing
#amazingtechnologyprocess
Taking the meaning of "Hand painted" to a whole new level. lmao...
Ah, so that's where those Harbour Freight wrenches comes from
Generally, they come from the exact same factories as the brand name tools, so... Lol
@@ke6gwf i actually set up a factory for this and they said they have 4 QA outcomes
Name brand
Factory outlet
Low-cost retailers
Failures
They used to have 3 but places like HB allows them to sell what would otherwise be a failure
@@angrydragonslayer that used to be true, but Harbor Freight is getting enough volume now that they can demand the better quality stuff, and there aren't enough failures to supply their demand anyway.
As Harbor Freight quality goes up, the quality of the other big brands has been trending down as they cut costs and skimp on parts, and various side by side tests that have been done comparing the various brands have been showing that some of the Harbor Freight versions are as good or better than a lot of the big names, which considering that Harbor Freight has higher volume than some of the big names now isn't too surprising, because they have the buying power.
So while some HFT stuff is still junk, they are including a lot of much higher quality tools now, and not just the rejects.
It hurts my joints just thinking about all that work on the ground. A step back in time.
Краска походу как питательный крем для кожи!
Особенно ацетон полезен
Вот что значит ручная покраска 😀😀😀👍👍👍👍👍👍👍👍
И не говорите, маляр это лучшая работа на этом производстве🙄
Радикально черный цвет оказался на поверку зелёным. Краску делали в соседнем подвале 🤣
🟨🟦🟨🟦🟨🟦🟨🟦🟨🟩🤣🤣🤣🤣🤣🤣
👍👍👍браво
That dude soaks his hands in solvent based paint all day for a couple of bucks a day.
The same bare hands he wipes his ass with and eats with!
Yup if he lived in California he prolly would get cancer thank God he lives in India.
@@blaze00366 Thank god it not listed as a carcinogen in India.
I always wondered how snap-on tools were made!
SNAP ON DOESN'T HAVE THIS LEVEL OF QUALITY CONTROL
@@harryballsacky lmao
Открою жижу, в миску налью,
Свою я руку, эх окуну,
Немножко химии, туда долью,
А после друга, похороню.
Пропел пол Сектор Газа "Бомж"
А если у маляра нос зачешется. Что тогда?
Very cool. I like the welders setup. The inclined backwards chair. Smart.
It’s amazing what these workers can do in these places. And 99% of the time they don’t use “ work tables” for some reason. Building conditions are unsafe and always cluttered. There’s no safety clothing eye protection etc. It’s crazy.
And they work, dress and speak like
Chipmunks 😁
Safety is a joke..
They may be lucky an wear sandals
@@monciak7252 I hope you get many clicks my friend...
Cause you're looking like new China..
Dodgy as much as we want to pay ...
WillemPowerfish to you!
It's 15 years i work in europe in the metal industry and i can say it's more dangerous here than in pakistan. Reason? There's too much stress and schedules and pressure that workers soon or late hurt them self
If they get hurt that’s the end of them working there no Workmen’s Comp. no nothing they’re fired
@@jeffreyburney6161 figured that. As many people as there are guess they are lucky to find work. Hell, as screwed up as America is getting we all may be like this in a few years
6:53…yeah, wipe the dust away mate. You don’t want it to get dirty.
All the hard & skillful work and at the end of it all, you have a low carbon , garbage tool.
Amazing to me
Я правильно понимаю, что это баллонные ключи? Если так, то головку приваривартвать, рутиловым электродом, дело такое себе.
Т.е. это едиственное, что Вас смущает на этом производстве? 🙂
По этому их там так много так как они одноразовые ))))))
Цікаво яка вага гото ключа
С головкой все понятно, а вот где берутся и делаются валы со шлицами осталось нераскрыто, умеют заинтриговать )
Это полу ося от легковушек
Настоящее немецкое качество 😉
@@andredanov Да! Точно!
Да там же, из четвертинок звеньев корабельной цепи. Нагревают в печи, потом в круглую заготовку и под пневмомолот. А затем на станке уже выпиливают шлицы. Также как и полуоси.
Wheel wrench for what? The handle isn't long enough for a lug that size.
Ever heard of that piece of pipe they shove over it? 😋
@@taunteratwill1787 You're forgetting the large hammer they belt it with too.
Something's gotta break those welds.
That guy in the end painting the wrenches with his bare hands and a cloth. 😳
@@ingulari3977 The biggest problem is poverty and greedy bosses I guess.
You can bet that that anchor steel is going to be high quality tough stuff.
316 is good stuff
Not ideal for wrenches but it works
Заводы одного европейского развитого государства на Рейне через 5 лет.
Если ваша робота кажэтся вам сложной и рутиной посмотрите что творит этот парень а веть ему возможно 21 годик только
👍😂😂😂
Робота ?
INCREDIBLE CREATIVITY BUT DOUBTFUL FINAL QUALITY
INCREIBLE LA CREATIVIDAD PERO DUDOSA CALIDAD FINAL
You guys better get all the stuff off the floor before the cleaning crew comes in tonight
Out standing Keep it up 👍
They can make anything you want but can't even afford/make a table a cart? Don't worry about the parts just throw them on the floor next to the dirt, no matter what it is there doing, making. Their backs must be made of steel LOL
that guy with the burner is good ,,,, but Im surprised that the steamer chain isnt worth more than the wheel wrenches.
IT'S A HELL OF A JOB!
Allways good to have floor to store things on….
Awesome I kinda miss working on the manual lathe so chill now I rarely see em
В России в каждом гараже есть токарный станок
Кто думает что в РФ "дикий капитализм" посмотрите что будет дальше)))
You have to respect these people. This is true recycling the way all societies did it at one time. The lack of a safe working environment is lamentable but not too different from past conditions in our societies. They can only improve. Importantly the end product is safe to use unlike for example butt welded truck axles.
I mean... I'm not sure what that chain is made of but if it's anchor chain.... That 306/316 might decide to take a chunk out of someone under normal use-case stresses
@@angrydragonslayer I have absolutely no idea what you are talking about - do you?
Why do they insist on working this way every step I watch I seen opportunities to stream line and make it less labor intensive. Maybe introduce these guys to something Henry Ford figured out a 100 plus years ago.
Like a broom, some benches and a paintbrush.
there is an endlessly increasing amount of people though why would you streamline and then what will they do
@@LOL60345 Hahaha priceless!
Because if you introduce what we understand as better system, no one of their clients would see them as quality. We know this are crap, but they and their clients think that by making them this way and with those materials is what quality is ....regardless of how many studies and science and tools and profits you show them, to places like this, this is the right way, and you are a "witch" if you say other wise lol
@@jlbueno0611 What about the workers and the managers? Why wouldn't they want to spend their days in a cleaner, healthier environment?
я так и не понял что за изделия они делают ( ключ ???
Hey guys, tell your welder... you push rod and pull flux core...
Cheer~~~a factory.😊
That’s the first factory I saw 👀 people wearing shoes/boots
One of the guys had welding gloves!
На пресс сколько народу намотало интересно? Они бесстрашные какие то.
So presumably the long bar forming the lever is put on later or is part of a trucks tools,? You'd never get a wheel nut off with that as it is. Ideas anyone?
all these workers are just amazing great skills
what is with these people and throwing shit on the ground. this is a fucking osha nightmare
Just because you live in a poor country doesn't mean you have to work up to your knees in filth. Clean your damn shop and stop throwing the products on the floor like they're worthless. Even though they most probably are. That steel could have been recycled and put to good use making proper tools instead of this low quailty crap. That weld is a major weak point. And as far as I can see there's no heat treatment done to the finished product. Good thing they're only making a wrench and nothing too important.
That's why they sell a lot of them,,keeps them busy😀
These people can't get it through their head that making crap using the most inefficient process possible will only guarantee that they will wallow in poverty for the rest of their lives.
It is a proper tool it looks perfectly functional - recycling the old boat chain directly into something useful is very resourceful.
@@stephenhumble7627 That anchor chain has way higher market value than the products produced from it's material in this video. This whole exercise is just dumb from top to bottom.
Good afternoon
Awesome nice video Thank bro for sharing.
great bosskuh, greetings to gold farmers
Dont know about you but i really feel sad for that painter, i wonder what his hands look and feel like after working just a year with his hands directly in those chemicals. How healthy could it be?
where your Wish orders come from
Это собственно что за изделие то? Если ключи то нахрена их столько? Да и с размером явно чёт не то.
Да это для грузовых гаек балонный ключ
Nice work!!
Thanks for the video😁
Мне кажется вороток для такой головки великоват.
сдаётся мне, что для отворачивания гаек на колёсах грузовиков, с полутораметровой трубой-удлинителем, в самый раз!
HAHAHAHAHAHA Without knowing what alloy they use, that's called melting like a metal beast
THEY TOOK DOWN THE " HOW MANY DAYS SINCE THE LAST ACCIDENT SIGN" YEARS AGO...
Smack-on wrench
Интересно, какая марка стали на этих ключах?
They are totally abusing them machine tools. Lol 🤣
They always put their things on the floor and there's a guy picking them up. still.
Using an induction heater (about 5Kw) for heating in both stages of process would reduce energy costs to about 25% of what is spent now with gas heating system in video .
Из старых якорных цепей торцевые головки, из старых полуосей ручки. Покраска пиздец, жалко маляра.
As always, life is worthless. Killer bosses don't give out safety equipment.
Those made with wrought-iron chains?
Everything in context. These guys get more than unskilled labour
No they don't . 😋
Ahhh a right handed what do you call it. I’ve always wondered how they were made.
DAS NEIN NEIN UNFALLVERHÜTUNGSVORSCHRIFTEN!
I am happy to see the word "Craftsman" in the title. Craftsman is
a U.S. brand whose tools normally come with a lifetime warranty!
I'd be surprised to see these tools come with a lifetime warranty.
@@GAIS414 Your choices: Lifetime Parking Lot Warranty: as long as you stay in the parking lot of the store, you are covered. The Old Japanese/Chinese Lifetime Warranty: if it breaks, you got to keep all pieces.
I'm impressed at their hard work and recycling process,but I'm horrified by the lack of safety measures,,masks gloves,good shoes and order and cleanliness,will prevent accidents.
we missed the money shot again!. cmon. I wanted to see it all shiny. Also its must be great getting millions of dollars from TH-cam views. these videos are fantastic
Another AMAZING TECHNOLOGY is a paintbrush and yet another great AMAZING TECHNOLOGY is a stirring stick. At 11:32 instead of using your hand you use the stick to stir the paint. A paintbrush is similar to the stick but it has bristles to transfer paint from the brush to the work piece without the need to cover your hands in paint. I would love to see technology like that on your channel. Thank you
Too bad the US does not have such skills. Takes recycle to a whole new level. Wonder how much of the material is what we waste in the US. Chain and axles equal socket wrench!👍
This is where its all going. Our mfg processes are 100x past this level of technicality.
US doesn't have the skills? Yeah OK.... that's why there are millions of illegal immigrants in Pakistan from Europe, USA, UK and Australia. People are killing themselves to get into that well advanced modern country.
We would never get away with that here in America. The EPA and OSHA would shut ya down as fast as you start operating.
Boat chain is wrought iron... right?
“Snap on” factory???
Um trabalho muito perigoso precisa ter muita cuidados 👏👏👏👏👍🤝🇧🇷🇨🇮
0:25 foreman is ramrodding the torch guy
Outstanding!!!
Do they make swords and shields there?
harbor fright !!!!!!!
their sped up talking sounds like Jawas
That lifetime warranty
Always throwing crap on the floor just to pick it up again. Why do you people make it so hard on yourselves.
Хотя бы стапель вертикальный собрали для сварки. А то там точность никакая поди
They seem to be a lot Muslim in these videos, wonder why Allah has them working for Pennie’s in a dangerous workplace, sounds mean…
Those "old axle rods" sure look like chain links....
The chain links ended up as the socket and axle rods for the handle.
Maybe the health and safety at my work isn't so bad after all.
Hard work
A lot of work, little pay
Harbor Freight?
Can anyone explain why the background noises are accurate sounding but the people's conversations sound like Cinderella mice?
Что за херню они производят?
это БУМЕРАНГ !!!!
@@andreykatskin818 балонный
Nice
His hands are definitely falling off in 5 to 10 years lol
Awesome nice video
That''s right.!
All done…..
*Will the workers even see some money? Or will it be grabbed only by those who film it and publish it on TH-cam?*
there are so many channels and videos like this, based on India, Pakistan, Bangladesh... I had the same thought a while ago an stopped watching them, intersting content yes, dodgy business all together, also yees.
Who’s gonna buy that worthless tool?
Que triste ver as pessoas colocando a vida em risco sem qualquer uso de epi!
Сварка в один шов? Не верю!
So bloody skillful & quick well done guys👍👏👏👏👏👏👏
They are turning perfectly good ship anchor chain into scrap. At a cost of both material use and man hours. Far better would be to re-use the chain.
As to final product, well, I guess it has its use in Pakistan. But not much use anywhere else. I have very similar looking wheel wrench on my scrap pile. I.e. it will soon be turned into... raw steel bar. I may cut out the shaft parts out of it - they are of some use to me. Too bad they had to bend it - I would have longer shaft without the bend.
If you know of someone who is looking for used chain, you should hook them up.
So you just had to write something? Do you ever think before you write? 😋
I agree! The anchor chain is worth way more than these so called wrenches.
Thôi mua bảo nhiêu chở về kho ở sài Gòn mà cất...đợi cao tào bán...nếu mua mà có thuế mà thiếu cân ...hải quan với tổng cục thuế mệt đấy 2.399tỏi có hoá đơn ghi đủ đấy thuế
Esta gente da susto verlos trabajar en esas condiciones acabando sus vidas por limosnas que eso es lo que les pagan😢😢😢😢
Amazing proces