To me it looks like they could learn to make the sockets interchangeable like the rest of the world. But also they are only trained to do one thing. The old man stamping the sockets worked 30 years to get a job with a chair.
Don't spread misinformation. I've seen multiple of these guys stand up from their post and take the item to the next duty and do that job also. Seemingly knowing how it will all fit together. Sure most probably only know what their task is but do not not underestimate these guys I'm telling you.
No, it is not true. Knowing only a small task is usually related to advanced areas, that want better automation, faster product production and lower training costs. But in small industrial areas they are usually very capable and they are very flexible in what they do.
It is a Wheel spanner, or wheel wrench used to break loose lugs nuts on a car. Pop open the trunk of your car and you will see a single socket welded to a rod with 90 degree bar attached to it. This obviously is for bigger lug nuts, or big trucks
Notice you don’t see anybody with a mangled looking foot or a limp or wearing eye patches which tells me these guys understand the importance of Safety Third so such items are superfluous to them
Все операции могли делать пару человек,так нет на один вал их 30, вопрос сколько получит каждый ,ключи омбра не иначе.Зачем в стране столько ключей, такое чувство что меньше гаек у них нет.
Это как у нас с масками? 😃Никто не хотел покупать и носить, а деньги за заводик по производству масок отбить надо😉Давайте сделаем обязательное применение масок!
Robot factory costs a 10 million - hundred million dollars to start. And that's even super expensive for us Americans. When you are IN parkistan or middle east that amount of money is unfathomable. You could feed everyone in the country for 10 years with that amount of money
You are really there in India / Pakistan aren't you?? Amazing. Your channel is takin off too. You should monetize it asap. You'll get paid. Don't tell anyone how much money you'll get from here either. You'll probably get robbed . Seriously though
высокая культура производства.
особенно покраска
To me it looks like they could learn to make the sockets interchangeable like the rest of the world. But also they are only trained to do one thing. The old man stamping the sockets worked 30 years to get a job with a chair.
Don't spread misinformation. I've seen multiple of these guys stand up from their post and take the item to the next duty and do that job also. Seemingly knowing how it will all fit together. Sure most probably only know what their task is but do not not underestimate these guys I'm telling you.
No, it is not true. Knowing only a small task is usually related to advanced areas, that want better automation, faster product production and lower training costs. But in small industrial areas they are usually very capable and they are very flexible in what they do.
It is a Wheel spanner, or wheel wrench used to break loose lugs nuts on a car. Pop open the trunk of your car and you will see a single socket welded to a rod with 90 degree bar attached to it. This obviously is for bigger lug nuts, or big trucks
It's a simple breaker. To be used in combination with moderate violence. No socket can withstand such forces.
Покраска ваще огонь 😳
Thanks 🙏
он не понял твоего сарказма
ਸ਼ਾਇਦ ਜ਼ਿਆਦਾ ਤਨਖਾਹ ਨਾ ਹੋਣ ਲਈ ਬਹੁਤ ਸਾਰਾ ਕੰਮ।
Śā'ida zi'ādā tanakhāha nā hōṇa la'ī bahuta sārā kama.
NEED TO IMPROVE SAFETY, NICE WORK
Nice work🇧🇩🇧🇩
Покраска мега уровень!
The ingenious survival instincts of a human species
Kudos
Оцинкованные красише бы смотрелись, чем крашенные отработкой
Good to see many people employed having jobs
You know these fellas built nuclear weapons ?
Awesome tool making procces
Good work
acho vocês muito criativos e praticos parabéns. saúdo de Brasil
Safety Eye glasses and work boots should be used at all times in that environment.
Ele não usam porque não tem condições de comprar.
Notice you don’t see anybody with a mangled looking foot or a limp or wearing eye patches which tells me these guys understand the importance of Safety Third so such items are superfluous to them
Comes with the full Snap-On Lifetime Warranty....
Or something...
Harbor Freight?
nah, this quality surpasses harbor freight
most of the pakitani every time they finished their product they throw it in the dirt...
7:42 respectable dog
Point
Stanley tools Pakistani edition....
working days with red iron, stay careful guys
I think so brother.
Все операции могли делать пару человек,так нет на один вал их 30, вопрос сколько получит каждый ,ключи омбра не иначе.Зачем в стране столько ключей, такое чувство что меньше гаек у них нет.
Thanks
Их там под миллиард, если не занять каждого, то они воевать начнут. А так все при деле 😁😁😁
@@ОльгаНикифороваСм ага .
Qué trabajo fuerte, seran bien remunerados?
У работников нет перчаток красят и всё делают голыми руками . Откройте завод по производству перчаток …!!!!
Это как у нас с масками? 😃Никто не хотел покупать и носить, а деньги за заводик по производству масок отбить надо😉Давайте сделаем обязательное применение масок!
In next 1000 years someone also in Pakistan will invent tables and chairs.
Not with help from morons like you🖕💩👎
Примерно так будет выглядеть завод VW, через пару лет, если санкции не отменят.
Российский завод ))
Ваз с уазом никогда по другому и не выглядели.
Всегда было интересно на финансирование каких организаций идёт монетизация? А? Интересный вопрос, не правдали?
Making everything by hands taking longer time than robots
Though at a mere fraction of the startup cost.
So what?
Robot factory costs a 10 million - hundred million dollars to start. And that's even super expensive for us Americans. When you are IN parkistan or middle east that amount of money is unfathomable. You could feed everyone in the country for 10 years with that amount of money
@@Speedster189 let's make our own robots rather than buying expensive which we cannot afford. We have everything
@@Speedster189 maybe it would be a good idea to make quality items not junk! And efficiency isn't the common thing I see in these videos!
নাইচ
must be for trucks because those are some big freaking lug wrenches
You are really there in India / Pakistan aren't you?? Amazing. Your channel is takin off too. You should monetize it asap. You'll get paid. Don't tell anyone how much money you'll get from here either. You'll probably get robbed . Seriously though
from india.india people
have high skiil working but people working no use safety
Насос?
Точно?
Это же гидроцилиндр.
Из торсионных валов делают.
No bevel welding the shaft to the socket?
Yea, harbor freight right there.....
Прямо к баллону кидает, красота
Хотел написать своё мнение, но, тут уже всё написано, нет смысла добавлять что то ещё. Печаль, а не производство.
Perfect...
Not a burn hole to be seen in there shirts
Did anyone else notice that old man's hair color ?!?!
he dyed it with henna.
Трэш производство, главное что б на экспорт никуда не шло.
Every one of these videos there is at least one clean well dresses person watching these workers, do the enslave each other?
Be careful,bro.
Из полуосей делают ключи 🔥
Интересно, что они из старых баллонников куют? 🤔
@@Pikulev_Evgeniy клапана
@@Alex23092709 А из клапанов отвертки))) Впрочем и у нас из них отвертки плющат
мы в сервисе делали удлинители из поперечины от жигуля.
Всё шедеврально, качество минус.
🙏🙏🙏
I feel sorry for them. they live on these obsolete technology.
Как-нибудь скажет что они делают? Столько возни и в итоге какая-то чумазая гнутая труба?! 🥺
похоже на балоневые ключи
@@wordctar7905 Просветите пожалуйста, что это за "балоневые ключи"?))
@@HeavyMETALoO6PA6OTKA it's for the nuts of a lorry/truck. Your car have a similar tool in the trunk.
Штангель роскошь
🤣🤣🤣 Donald Trump (Orange Hair) in Pakistan
How to make a water pump head metal casting 👇
th-cam.com/video/VnAtSBildsI/w-d-xo.html
Какие они всё-таки труженики люди пришлите им всем спец одежду
@@НиколайМитянов-э1ц I don't understand russian
ن
+
Thanks
Покраска мега уровень!