ACCEL SUPER RAM-THE ULTIMATE TPI? LET'S TALK TECH

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ก.ค. 2024
  • DYNO RESULTS. WHEN IT COMES TO TUNE PORT INJECTION, THERE WERE A NUMBER OF CHOICES, FROM STOCK TO MODIFIED STOCK TO DRAMATIC CHANGES IN THE INTAKE DESIGN. WHICH ONE WAS BEST AND WHICH ONE WOULD YOU CHOOSE? LET'S TALK TECH.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 13

  • @ronbo422
    @ronbo422 21 วันที่ผ่านมา +2

    You're speaking the original language of my peoples, Richard. 😆 I had a 421 with a SuperRam. Mild cam, slightly ported TFS Twisted Wedge heads, unported SuperRam....and it laid down 503 ft.lbs. at 3200, 421HP at 5600. On an original DynoJet chassis Dyno. Your peaks were spot on with mine. That combo would blow through the Centerforce clutch from about 2200 on up so I switched to a McCleod StreetTwin clutch. That one DID NOT slip and allowed the power to xfer through the TKO 5-spd. 11.70 on motor, 10.50 on a measley 150 shot. 3300# 3rd gen Camaro.

  • @patracy
    @patracy 23 วันที่ผ่านมา +2

    How fitting. I searched high and low for a Accell super ram intake for my big block. I've always loved the tuned ports. And it looks great.

  • @Val_Killmore
    @Val_Killmore 22 วันที่ผ่านมา +1

    Have you ever tested the Accel SuperRam they made for the big block Chevy? This style more specifically Accel 77106. The dyno sheets in their brochure makes it look like the ultimate intake.

  • @johnwally4320
    @johnwally4320 23 วันที่ผ่านมา +1

    I have the superram with ported edelbrock lower the only problem is I need to upgrade the antiquated tuning system with the gen 6 computer and narrow band o2 sensor the superram is a nightmare to work on

  • @nessumsar
    @nessumsar 23 วันที่ผ่านมา +1

    I've got a small block Superram if someone's looking for one. Along with a complete Holley HP efi setup for it.

  • @stevenwindham4049
    @stevenwindham4049 19 วันที่ผ่านมา +1

    I have a accel super ram plenum BBK throttle body on a big mouth manifold air flow heads 5.7 block. The Module is a very old accel system. It Doesn't have cables or software. Is there A good Fuel injection management system that will work well with it?

  • @tedbudzilek6113
    @tedbudzilek6113 23 วันที่ผ่านมา +1

    Have you ever tested the mini ram intake by TPIS? It's similar to the LT4 intake manifold.

    • @richardholdener1727
      @richardholdener1727  23 วันที่ผ่านมา +1

      YES-THAT WAS TESTED AND COVERED IN THE ORIGINAL VIDEO AN IN THIS ONE

  • @tonythetuner9763
    @tonythetuner9763 23 วันที่ผ่านมา +1

    Rich did you ever test any of the Arizona Speed & Marine custom made tuned port intakes they were making for 6-8 year's back in the day?
    We made some really good power on a couple combos with them

    • @richardholdener1727
      @richardholdener1727  23 วันที่ผ่านมา

      WHICH ONE?

    • @tonythetuner9763
      @tonythetuner9763 23 วันที่ผ่านมา

      @@richardholdener1727 The 2 they made the longest appeared a lot like the Accel but just taller. We did a 406 & a 477 with them

    • @ztwntyn8
      @ztwntyn8 23 วันที่ผ่านมา

      For big blocks?