sir we have bft Ares BAT 1500 sliding gate moters. how can I increase the speed? sometime it sudden stop when moving and cover a short distance, while some time it cover full path but it become too slow. sensor is ok, oile also used to the sliding materials
I followed all the instructions you provided on this video but I got in logic aux 0 - 006 and in aux 03 - 000 and when I click + - several times and click second button I hear a noise (probably relay sound) and nothing happens. There is no PED in LCD. I got Ar preset programmed.
If you would like to hold gate open (ignore TCA) using remote: - Make sure you have the "step by step" in the "LOGIC" menu is set up to 4-Step logic. - Open gate using remote. - Once fully open, click remote again to close. - Quickly push the remote button again to stop the gate from closing That sequence should stop the gate from closing and bypass/ignore the TCA...
Go to the Param menu and you will see partial opening, that is the setting that determines how far the gate open for a ped command it goes from 10-99 the number means percentage of the gate so if you were to select 50 the gate would open 50%
Does TCA works on second button? If my first button has Ar preset and 31 seconds TCA(31 seconds wait till closing the gate) so If I program pedestrian in second button and then It will close the gate after 31 seconds or it won't?
Pedestrian will only open the Gate a certain percentage. Do not suggest using this for what you want. Check other comment I left regarding holding the gate open.
sir we have bft Ares BAT 1500 sliding gate moters. how can I increase the speed? sometime it sudden stop when moving and cover a short distance, while some time it cover full path but it become too slow. sensor is ok, oile also used to the sliding materials
Could you explain more on what I'm looking for in the logic menu
Looking for the Radio menu. Not the logic menu.
If I want the second button to make the gate, stay open all the time on a dual gate
I followed all the instructions you provided on this video but I got in logic aux 0 - 006 and in aux 03 - 000 and when I click + - several times and click second button I hear a noise (probably relay sound) and nothing happens. There is no PED in LCD. I got Ar preset programmed.
I see you don't have the AUX 3 in your logic settings.
There is your problem. "NONE" of the AUX should be set to 000 or PED will not work.
@@BFTAmericasInc so what is the best aux 3 = X
@@BFTAmericasInctrue, by default aux3 is 000. I have change it at it started to work. Thx a lot!
Hello, how to set the second button to open a gate and stop after it's opened and then If I click again it will close the gate?
If you would like to hold gate open (ignore TCA) using remote:
- Make sure you have the "step by step" in the "LOGIC" menu is set up to 4-Step logic.
- Open gate using remote.
- Once fully open, click remote again to close.
- Quickly push the remote button again to stop the gate from closing
That sequence should stop the gate from closing and bypass/ignore the TCA...
@@BFTAmericasInc could do you a video about this, because I tried it and it closes after TPA time.
I managed to set Pedestrian mode but the gate opens completely. I would like it to open only a certain percentage. What setting should I do?
Go to the Param menu and you will see partial opening, that is the setting that determines how far the gate open for a ped command it goes from 10-99 the number means percentage of the gate so if you were to select 50 the gate would open 50%
It is possible to use one button for open gate and second for close ?
سلام عليكم شلون احصل فيدو تعليمي لاصلاح جهاز درابة الكترونية...
And peace be with you! Where are you located? I will see if I can point you in the right direction. Write us at Tech@BFT-USA.com
Hello good morning brother
Morning 🤗☕
Does TCA works on second button? If my first button has Ar preset and 31 seconds TCA(31 seconds wait till closing the gate) so If I program pedestrian in second button and then It will close the gate after 31 seconds or it won't?
Pedestrian will only open the Gate a certain percentage. Do not suggest using this for what you want. Check other comment I left regarding holding the gate open.
@@BFTAmericasInc Thank you, I'll test it out. ☺️
سلام عليكم م ف ترجمه عربي