After failing to extract much meaning from BFT's own instructions I was very relieved to find this admirably clear video, which enabled me to programme two new remotes without any problems. Thanks v much.
but what if you have 2 with different code... i mean, watching this, you press the same buttons on both devices sooo how the will the system decide who will copy from whom o.O
Thanks so much for posting these instructions. I was able to program an additional (generic) remote fob from my existing BFT fob in less than a minute saved me $200. ⭐️⭐️⭐️⭐️⭐️
Worked perfectly for the left button so what I would add is that if, like me, you have the 2 button remote and your right button is used to open only one gate you can repeat this process but instead of pressing the left button, you press the right button on each remote. You follow the same order as in the video.
Bought a generic fob, it did not work, bought a genuine BFT, IT WORKED.... THANKS :) I was told by a gate "tech" guy that the updated circuit boards controlling the gates at our, complex blocked generic controllers...
Mine worked straight away. Thankyou for the information. I thought I had to open the unit at the gate. This video sure saved alot of time and stress to get my new remote to work 😀😀😀😀
Thank you! Is there any way for the maintenance company to fill the memory/slots of the receiver or to key protect it so the only way to copy is to do it buying at their shop? I'm afraid this method won't work for me:( however they copy them without being close to the receiver... 🤔
The left button on my remote is no longer working (red light doesn't come on when pressed), however the right button still works. How do I re-program it to use the right button instead?
Thanks mate, I had troubles coding the BFT B RCB from a Mitto 2 because I didn't know that my Mitto had the rear button... I was holding the 2 frontal buttons like an ideot with no use xD ... And then, I found your guide
Why isn’t this on the remote user manual, or anywhwere - thanks, I’ve just brought the ladders and unscrewed the garage motor cover omg this is so elegant - can you do with any remote without it being close to the garage?
Hello, I've added new remotes before using your excellent tutorial. Clearly I've done something wrong this time! Now that I've pressed all the flipping buttons and been out to the gate twice, I'm stuck. Do I just start all over again or should I chuck everything in the bin and open the gin?
Hello, if understood correctly I and want to setup a new BTF I need to stand close the the garage door ( no need to open the electronic unit ) and using a working BTF and can follow you video , is that correct ? , I am asking because I've seen other videos where you open the electronic unit .
Hi Platinumlook, I was trying to follow the instructions but the new remote is still not active. I have no access to receiver (it is locked) but stood right next to it. I try to clone from the working remote. 2 buttons first then 1 left button - working remote and the new one. Could you please advise;)
Y Y - sorry for a late reply but just saw this. This may also help someone else. The other thing I found is that you need to start step 2 (coding new remote) straight after without pausing much completing step 1 (pressing the button on ‘old’ remote) otherwise the new coding doesn’t register. And again, make sure you’re standing as close as possible to the motor/receiver. Hope this helps as it only worked for me after I made sure I was very close to the motor and I completed the steps quickly without pausing too much between steps 1 & steps 2.
The dislikes are very unfair because this video was hugely helpful. I was going to be charged a lot of money by the fitter just to code new remotes if it wasn’t for this, so THANK YOU for the video. Probably the dislikes are from people who are having difficulties but that doesn’t mean the technique doesn’t work..
Mine didn’t work with this. It’s a leased property where every flat received one remote only and the managing agent want to charge me crazy money to get me a spare gate remote because apparently it’s difficult to programme. Any ideas why my new remote isn’t programming? The old one works fine! Could it simply be that they did something to ensure we can’t programme ourselves and must pay a lot of money if we wanted a spare?
I have BFT Mitto4. After watching your video, I was able to copy top 2 buttons for opening the main gate, one first one is to open the gate fully and the other one is half opening. Thank you for that. Now I can not copy the third button for opening a garage door. I tried many times as I did for top 2 buttons but somehow I can not copy the third one......Could you tell me how to copy the third button, which is the bottom and left one.
Thank you. This is exactly what I needed to reprogram one of the older style fobs. This video is 10 years old but it’s still helping people.
Thank you. I've watched countless videos in French (as that's where I live) and this is the first one that actually yielded results! Lol!
Thanks so much. Programmed mine in 20 seconds! Super fast and easy and useful. Keep up the good work
Brilliant video, thank you! Programmed my extra remote in seconds, after originally trying and failing from the confusing bft instructions
6 years old and this video is still adding value. Thanks!
After failing to extract much meaning from BFT's own instructions I was very relieved to find this admirably clear video, which enabled me to programme two new remotes without any problems. Thanks v much.
Thanks for taking the time to make this. Very simple and clear. I have the new version remote, worked perfect. Bravo!
but what if you have 2 with different code... i mean, watching this, you press the same buttons on both devices sooo how the will the system decide who will copy from whom o.O
Thanks so much for posting these instructions. I was able to program an additional (generic) remote fob from my existing BFT fob in less than a minute saved me $200. ⭐️⭐️⭐️⭐️⭐️
Now 10½ years old, and still helping people. 👍
It’s so simple yet wouldn’t have known. Great video
Worked perfectly for the left button so what I would add is that if, like me, you have the 2 button remote and your right button is used to open only one gate you can repeat this process but instead of pressing the left button, you press the right button on each remote. You follow the same order as in the video.
Awesome, working flawlessly. Thanks for taking the time to make this.
Excellent video - worked fine in retuning an old fob with new battery and a brand new fob.
As easy as shown on the video. Thanks a lot for the quick delivery and great service
Bought a generic fob, it did not work, bought a genuine BFT, IT WORKED.... THANKS :)
I was told by a gate "tech" guy that the updated circuit boards controlling the gates at our, complex blocked generic controllers...
That was magically simple! Thanks.
Thank you, this worked first time for me!
Thanks so much for uploading this
Thanks mate, it worked first time in OZ.
Thank you! I just bought 3 new remotes and they did not come with instructions. This worked perfectly!
Thanks again... followed your instructions a few times now!
Mine worked straight away. Thankyou for the information. I thought I had to open the unit at the gate. This video sure saved alot of time and stress to get my new remote to work 😀😀😀😀
Thanks so much for loading this video. So clear, so easy and most important it's working !!!!!
Thank you! Is there any way for the maintenance company to fill the memory/slots of the receiver or to key protect it so the only way to copy is to do it buying at their shop? I'm afraid this method won't work for me:( however they copy them without being close to the receiver... 🤔
Thank you. Worked perfectly. Can't thank you enough, and down to my last I caught it just in time.
The left button on my remote is no longer working (red light doesn't come on when pressed), however the right button still works. How do I re-program it to use the right button instead?
Thanks mate, I had troubles coding the BFT B RCB from a Mitto 2 because I didn't know that my Mitto had the rear button... I was holding the 2 frontal buttons like an ideot with no use xD
... And then, I found your guide
Thank you worked like a charm!
is there a way of clearing remote to start again?
Hi! Can I erase a BFT Mitto 2 remote and reuse it for another motor? Thank you for your answer!
Is there a way of setting up and new remote after losing the original?
Why isn’t this on the remote user manual, or anywhwere - thanks, I’ve just brought the ladders and unscrewed the garage motor cover omg this is so elegant - can you do with any remote without it being close to the garage?
Thank you so much this worked perfectly for me
Hello, I've added new remotes before using your excellent tutorial. Clearly I've done something wrong this time! Now that I've pressed all the flipping buttons and been out to the gate twice, I'm stuck. Do I just start all over again or should I chuck everything in the bin and open the gin?
I have problem with garage door and bft remote. Garage door close 10cm above the end. How to make them close to end?
Thank youuuuuu ! Helped a lot 🎉
Really good video. It worked for me straight away. Thanks
Excellent video, works like a charm. Thanks.
I don't get what the dislike are for. Worked perfectly, thanks.
Works perfectly, thank you
Secret button on the new remotes aren’t working (lights come on immediately). Any suggestions to set the new remote up?
Keep using this vid everytime I need to retune remote.Thanks!
Excellent! Works well. Thanks a lot!
This helped a lot, Thank you very much.
Thanks for nicely explained video very easy n Helpful
Hello
I've tried it
Is it possible that the new remote is not original Bft ?
Or do i need to be near the barrier in order to program it ?
What button combination stops the door from automatically closing after the time out?
Spot on guide. Works for me.
Hello, if understood correctly I and want to setup a new BTF I need to stand close the the garage door ( no need to open the electronic unit ) and using a working BTF and can follow you video , is that correct ? , I am asking because I've seen other videos where you open the electronic unit .
Worked a treat
my old remote got washed in a washing machine so I only have two new ones how can I program two new ones it is the one with two buttons,Thanks.
Oliver Cosic me too no old remote. What do I do
Hi did you find out how to do this as I have lost my old remote?
I have been going through the process for an hour and it won't read the new remote. Is there another way?
Very good,clear instructions. Thanks
Great video programming worked ok.
How do I delete the code of a button I don’t want to work any more?
bash it with a hammer
Amazing help thank you very much
Thank you...
Worked perfectly 👍
Worked just as you said, thanks!
I found that you need to have the remotes close to the motor that you’re trying to program.
Hi Platinumlook, I was trying to follow the instructions but the new remote is still not active. I have no access to receiver (it is locked) but stood right next to it. I try to clone from the working remote. 2 buttons first then 1 left button - working remote and the new one. Could you please advise;)
Y Y - sorry for a late reply but just saw this. This may also help someone else.
The other thing I found is that you need to start step 2 (coding new remote) straight after without pausing much completing step 1 (pressing the button on ‘old’ remote) otherwise the new coding doesn’t register.
And again, make sure you’re standing as close as possible to the motor/receiver.
Hope this helps as it only worked for me after I made sure I was very close to the motor and I completed the steps quickly without pausing too much between steps 1 & steps 2.
The dislikes are very unfair because this video was hugely helpful. I was going to be charged a lot of money by the fitter just to code new remotes if it wasn’t for this, so THANK YOU for the video.
Probably the dislikes are from people who are having difficulties but that doesn’t mean the technique doesn’t work..
Hi, could you tell me how i configure an old one with hidden bottom with another old one with another hidden bottom?? Many thanks
waiting 30 SECOND AFTER THE (2:30 to the end) FULL MANIPULATION is important, IN FRONT OF THE DOOR CONTROLLER
Thanks a lot! You saved me
Mine didn’t work with this. It’s a leased property where every flat received one remote only and the managing agent want to charge me crazy money to get me a spare gate remote because apparently it’s difficult to programme. Any ideas why my new remote isn’t programming? The old one works fine! Could it simply be that they did something to ensure we can’t programme ourselves and must pay a lot of money if we wanted a spare?
Mon Avonabah hi did you find out the answer to this as I am having the same problem?
I was able to program my gate remote following the instructions in this video: www.dailymotion.com/video/x10e1d2
thanks. will try it a little later :) hope you nailed it :)
Many thanks for taking the time to make this helpful video:-)
Thanks. worked a treat! Straight forward instructions well presented.
I have BFT Mitto4. After watching your video, I was able to copy top 2 buttons for opening the main gate, one first one is to open the gate fully and the other one is half opening. Thank you for that. Now I can not copy the third button for opening a garage door. I tried many times as I did for top 2 buttons but somehow I can not copy the third one......Could you tell me how to copy the third button, which is the bottom and left one.
Thank you👍 Works like good un!!
My Last BFT died, bought 2 more, new ones, how can I programm this?
I only have other non BFT remotes.....
Thank you, worked perfectly for me!
Thanks sir it works perfecly
Good video!
Do i have to stand next to the gate to do this? Can't i just copy the code somewhere else as long as i have the other working remote?
Very useful video
Güzel bir anlatım teşekkürler
GREAT WORK THANKYOU!
Hello
if i have 4 button BFT can i program it with 2 button BFT?
شكرااا . تم التحربة بنجاح
I try lot of time but it is not working thanks
Thank you very much
Excellent
merci , Top :)
Thanks buddy regards
Everyone says to me that bft motors take only bft remote....
Плохо, что в описании инструкции или пояснения нет.
I tried and no luck at all
What if you lost the remote how do you program new one
Thanks heaps
Funciona perfectamente
не сработало, пульты mitto
Ppl
.😗😆😗😗
Does not work!!!! Grrrrrr.
Hey, it also does not work for me. Is there an option in the systems to block this function??
Great!!! Thank you for this. So easy. Very well explained!
Thank you so much, worked perfectly..