BFT Mitto - Adding new remote to a BFT operator

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ม.ค. 2025

ความคิดเห็น • 65

  • @kwantowy_prokrastynator
    @kwantowy_prokrastynator 2 หลายเดือนก่อน

    I messed with my operator and somehow remotes stopped working. This fix was super fast and 100% worked, thanks bro!

  • @averynarrowjourney2414
    @averynarrowjourney2414 หลายเดือนก่อน +1

    On one of your videos you said the maximum number of remotes is 64, how do you check how many remotes are already programmed and is it possible to delete just a few or do I need to delete them all and start again

    • @BFTAmericasInc
      @BFTAmericasInc  หลายเดือนก่อน

      Hello, that depends on what control board you have. If you can email us the type of control board you have at tech@bft-usa.com

  • @thetelescopeclub9920
    @thetelescopeclub9920 หลายเดือนก่อน

    hi,
    I have to set push button command. Three push buttons. Open, stop and close. in Guino ultra bt. How do i connect the wires and is there any configuration for that?

  •  3 หลายเดือนก่อน

    hello, why is it that the loophole function cannot be found in any video? it cannot even be interpreted in the description. Other manufacturers name it exactly and describe it step by step. Do you have an idea for BFT ZARA BTL2 2020 how to teach the opening of the single wing?

    • @BFTAmericasInc
      @BFTAmericasInc  2 หลายเดือนก่อน +1

      Are you trying to add a pedestrian command where only 1 gate opens/closes.

    •  2 หลายเดือนก่อน

      @@BFTAmericasInc Hi,
      yes from both wings, just one.
      In the case of other electronics, for example, they are called ped in the description, partial opening, loophole, etc., here the engineers do not walk the earth, just to make the product different, they give all kinds of idiotic names to everything. In the youtube video, even routine installers do not show it, maybe not they understand, besides, or I don't know the control basically, I didn't find it exactly in the Hungarian description either, that's why I wrote it under your video.
      It is true that I want to install the single-leaf opening on an older BFT ZARA BTL2 2020 control.

  • @marinjovic9017
    @marinjovic9017 ปีที่แล้ว

    Is there a way to program the the garage opener which is integrated in the rear view mirror of a car?
    Can't find anything on the web...tried it on a bmw, but it doesn't work.

    • @BFTAmericasInc
      @BFTAmericasInc  ปีที่แล้ว

      you would need a homelink kit that would wire into the control board

  • @paulhutton6664
    @paulhutton6664 8 หลายเดือนก่อน

    Followed your very clear instructions to a Tee. I pressed the hidden button on the new BFT remote when instructed then pressed the desired button but unfortunately the display keeps showing 'ko' so kept trying starting from the beginning but to no avail. What does this mean and could you help? Many thanks.

    • @Caldyrugbyclub
      @Caldyrugbyclub 3 หลายเดือนก่อน

      Did you resolve this ?

    • @Goodnews4man
      @Goodnews4man 20 วันที่ผ่านมา

      My exact issue. A response would be helpful.

  • @adrianzanoli
    @adrianzanoli 2 ปีที่แล้ว

    I have 3 gates connected with this unit.
    How i program a BFT 4 buttons in a way that every button open a different gate?

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      You would simply repeat the process in this video with each gate operator control board. Just make sure, when you get to Minute 1 second 49 of this video, you are selecting a different button per operator.

    • @adrianzanoli
      @adrianzanoli 2 ปีที่แล้ว

      @@BFTAmericasInc there is only 1 control board for 3 gates, i think.
      I did the procedure correctly and it added the remote, the remote works, but it open only 1 gate.

  • @stevendang4218
    @stevendang4218 3 ปีที่แล้ว +1

    thanks however i did exactly the same as your instruction but can not see hidden button
    please give advices many thanks love your video

    • @BFTAmericasInc
      @BFTAmericasInc  3 ปีที่แล้ว

      I'm sorry to hear that. Send us a photo or small video of what is happening to tech@bft-usa.com. Also, Make sure that the board is in english if you are looking specifically for the word "hidden button".

  • @mihai6148
    @mihai6148 2 ปีที่แล้ว

    I have a question, how do I program one of the remote buttons to stop de gate from closing, since it's set to automatically close after a couple of seconds? Thank you

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      There are 2 ways you can do this 1st. turn off the automatic closing and use the remote to open and close the gate and 2nd. if you need to keep the automatic closing turned on then right when it starts to close press the remote button to stop the gate.

  • @Vietsical
    @Vietsical 2 ปีที่แล้ว

    I have an ultra gate opener and 3 of the remotes I have are now dead. So if I buy the bft gate remotes that look exactly like mine on Amazon, would I be able to reprogram to make the gate work ont he ew remotes? Thanks

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      If you search for BFT Mitto 2 or 4 something should pop up and those should work ok as long as you follow the video instructions. But you might want to try replacing the remote batteries (A23). If the red light comes on when you push the button after replacing batteries try to reprogram remote.

  • @russellpugh617
    @russellpugh617 2 ปีที่แล้ว

    Thanks for sharing and I have a similar question to one below, I have a gate with 2 elements and the original remote left button would open both elements and the right button would open only the right gate element. So how do I program the right button without overwriting the left button function that would of been then programmed via the routine displayed in your clip. In a nutshell how do I program both buttons on a single remote in conjunction with a dual gate operated by a single controller? thanks...

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      To do this the button that you want to open both gates together you would go to the Radio Menu and select Add Start and go through that process to work both gates. Then for the other button to work just one gate; when you go to the Radio Menu hit the minus (-) button one time and select add Ch 2 and go through that process and select the other button to open just the one side of the gate.

    • @RomanRoman-xi3dv
      @RomanRoman-xi3dv ปีที่แล้ว

      ​@@BFTAmericasInchello, i have coded replacement remote controller. Can i add it somehow to a motor without oppening motor unit? Can it be added to a motor unit by using original working remote?

  • @fequalsma42
    @fequalsma42 3 ปีที่แล้ว +1

    Does this work with the generic multicode remote or does it need to be mitto remote? (Trying to use a universal remote for garage and gate)

    • @BFTAmericasInc
      @BFTAmericasInc  3 ปีที่แล้ว

      This will only work with our BFT Products. If you would like to use Multicode remotes you will have to also purchase a wired in Multicode receiver and program to that.

  • @eapanenmas
    @eapanenmas ปีที่แล้ว

    To communicate using rs485, what commands must be sent to open the arm or close the arm?

  • @ikatsikoridze3492
    @ikatsikoridze3492 2 ปีที่แล้ว

    Hello, My bft has no display, I bought it around 12 years ago. How can I programme it?

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      On the top if the control board there should be 3 buttons the top button press one time and a LED right next to it should start blinking when it does hold the 2 buttons of the remote together when the light that is blinking goes solid let go of both buttons then press the button you want to control the gate with and then that solid button should start blinking again showing that the remote is programmed. If that doesn't work go ahead and take a picture of your board and send it to tech@bft-usa.com so we can better help you in programming the remotes.

  • @mrlengau95
    @mrlengau95 ปีที่แล้ว

    I have problem with the remot. For open the gate using remot is working normaly, but when i want to close the remot using the remot is not working and there is "Er 35" Every time i press the button for close the gate

    • @mrlengau95
      @mrlengau95 ปีที่แล้ว

      I already use 2 different remot and its still not working 😅

    • @BFTAmericasInc
      @BFTAmericasInc  10 หลายเดือนก่อน

      Er35 is an obstruction error, if there is no obstruction in the way you may need to increase the force setting. If you like send us an email at Tech@bft-usa.com and we can either give you a call or send instruction on how to increase it.

  • @dannytaams5514
    @dannytaams5514 9 หลายเดือนก่อน

    I tried this, but didn't work. The "hidden button" doesn't appear on the screen. At some point (after pushing all the buttons you mentioned), it says " - someting - second". Any experience with that?

    • @BFTAmericasInc
      @BFTAmericasInc  9 หลายเดือนก่อน

      If you give us a call at 877-995-8155 option 3 for tech support we can help you walk through it as well.

  • @life0storm
    @life0storm ปีที่แล้ว

    My remote is MITTO 4 for three doors since our garage is on 3 levels, so it uses 3/4 buttons - hold by one operating device can I program it somehow to work the same as my primary one? Should I program the buttons one by one or it doesn't work like that? Thank you in advance

    • @BFTAmericasInc
      @BFTAmericasInc  ปีที่แล้ว

      I am unsure of what your asking but each button can be programmed to a different control board. If you like you can email us at tech@bft-usa.com for more help

  • @bellebutton5101
    @bellebutton5101 2 ปีที่แล้ว

    Hi, does this work for re-programming existing remotes? We have 2 set to "pedestrian" we wish to change to open completely. Thankyou

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      Yes, when you do this process you can overwrite an existing function that the specific button used to do, or you could just program another button to full open and leave the other to pedestrian to keep both functions. Up to you. 👍

  • @jakekim9019
    @jakekim9019 2 ปีที่แล้ว

    Hi, mine shuts off in few seconds while setting. Could you help me with this please?

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      Looks like you figured out the jumper needed for programming. 👍🏻

  • @bradjessop3137
    @bradjessop3137 2 ปีที่แล้ว

    Thank you, great demonstration. Is 63 remotes the maximum or can I put more than 63?

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      Yes 63 is the maximum, but we do offer the Clonix 2E wired in receiver which will allow you to add from 128 to 2048 more remotes if needed. Check this link out th-cam.com/video/EwYHkU_6KUc/w-d-xo.html

  • @DogeLive-o7g
    @DogeLive-o7g 3 ปีที่แล้ว

    Bulunduğum sitenin yöneticisiyim Urano BT model otomatik kapı sistemi var. BTF kumandayı sizin ki gibi kopyalamaya çalışıyorum ama olmuyor. Yardımcı olur musunuz

  • @technologytoopens.p.a281
    @technologytoopens.p.a281 3 ปีที่แล้ว

    Need complete programming video bft maxima ultra36

    • @BFTAmericasInc
      @BFTAmericasInc  3 ปีที่แล้ว

      Sure! Check out our "Maxima Play List" with several tips and tricks. Try this link out....
      th-cam.com/play/PLy2R7OEbZmjJDj5WPUtW_Ptxj1oGCZVTM.html

  • @sniper29292
    @sniper29292 2 ปีที่แล้ว

    If there no screen.. How to program

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว

      No problem, Check this video out. Sorry that it is in Spanish, but if you follow along and just do what you see, it should be no problem. th-cam.com/video/VLqbsrrHFfM/w-d-xo.html

  • @jwconsulting9331
    @jwconsulting9331 3 ปีที่แล้ว

    great demo, thanks

    • @BFTAmericasInc
      @BFTAmericasInc  3 ปีที่แล้ว

      Much appreciated my friend! Glad it was able to help. 🤝🏻

  • @utos2195
    @utos2195 ปีที่แล้ว

    My friend gave me your contact number.. i have one issue with the new BFT control board. For adding remoute, i found up to radio after i can't find a hidden setting

  • @garygab4800
    @garygab4800 2 ปีที่แล้ว

    How do I fix this system because it’s hooked up to my gate and when I press the top left button it goes but only opens half way is there a way to fix that

    • @BFTAmericasInc
      @BFTAmericasInc  ปีที่แล้ว

      When you press the button does it say Ped on the display of the control board

  • @raivons
    @raivons 2 ปีที่แล้ว +2

    Worked! Thank you

  • @raymondlee0215
    @raymondlee0215 3 ปีที่แล้ว +2

    Thanks. It works great

  • @saleemsiddique848
    @saleemsiddique848 3 ปีที่แล้ว

    Help me plz My barrier Display show Er 20

    • @BFTAmericasInc
      @BFTAmericasInc  3 ปีที่แล้ว

      Sounds like an Encoder Error. Reach out to us at Tech@BFT-USA.com.

  • @prameshcctv3668
    @prameshcctv3668 ปีที่แล้ว

    thankyou

  • @AmstafStaf
    @AmstafStaf 9 หลายเดือนก่อน

    Thx for the video !

  • @joaquimmaiamaia3533
    @joaquimmaiamaia3533 ปีที่แล้ว

    Traduzir estas paginas para Portugues

  • @mongkhonplanespotter
    @mongkhonplanespotter 2 ปีที่แล้ว

    er 36 i dont know how to fix

    • @BFTAmericasInc
      @BFTAmericasInc  2 ปีที่แล้ว +1

      ER 36 is an obstacle detection during the closing cycle. Make sure your gate is closing with no issues when you push the gate manually. If there is nothing impeding the movement of the gate try to raise the torque in the "Parameters" menu. If you are still having issues please write us at Tech@BFT-USA.com and we will see if we can assist you further.

  • @NatesToolbox
    @NatesToolbox ปีที่แล้ว

    Worst board design ever just have an onboard program button or at least a proper English multi line screen like everyone else