Easy Way to Make Duplicate Remote Key Fobs on Honda Accord 2006
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Please subscribe to my channel. Thank you for your support.
This video is to show you how to make a duplicate key fob on Honda Accord 2006. Very simple steps to make it. You don't need a programming tool to make it.
Please subscribe to my channel. Thanks for watching and thanks for your support.
Note:
This procedure is not engine immobilizer programming, which is needed for a new key to start the engine. You will need Honda HDS, a PCM code or a dealership / locksmith can do it for your new key.
Disclaimer:
This can't guarantee against unauthorized modifications of this information, or improper use of this information. No liability for property damage or injury incurred as a result of any of the information contained in this video.
The panic button has to be pushed and held down for at least 2 seconds for it to work. Just pushing it momentarily will not trigger the alarm. Also, you don't need to push every button to have them programmed to the car. You only need to use the lock button. After the 4th time, hit the lock button once to enter it, and then hit the lock button a second time to save it to the computer's memory. After that remove the key from the ignition and test it to make sure it works. If it doesn't work, redo the 4 steps again.. And for those wondering.... this 4 time programming method should work for most Honda's that have remote buttons on the key.
Awesome. Good to know, Bro. Thanks for sharing
True
I bought honda key from dealer I programed it but I can't get the car the stay running , the security system doesn't recognize the key , I got it programed to lock and unlock but not run ignition. Do you know how to fix that part
It happened the same to me. I can’t start the car with the new key fob, just lock and unlock.
You might be able to help me out. I have an older accord. An 07 v6. I locked my only key in the car. Its stuck in the ignition. Car is off. Im going to take a piece of thin wire im going to slide it inbetween the door right where the door unlock pull is at and im going to loop the wire around and unlock the car pulling it. Unless im mistaken, the alarm shouldnt go off until I pull the lock right? Also, my key has a dead battery so Im hoping when i take it out of the ignition i can close the car door and insert thr key into the drivers doorhandle lock and lock it, then unlock it, lock it, and unlock it again and im hoping that will turn the alarm off. Im hoping the alarm wont go off while im sliding the wire in or im doomed because if i cant open it quickly then the vehicle will be stuck with the alarm going
Guy u are the best followed the same procedure and it worked thanks so much
You're welcome. Glad it works
Awsome video I followed a few others and my key fob stopped locking and unlocking even tho it work before.... followed this video and now all my keys work like this
Thanks 👍
Ok I guys I found out the hard way that this will only program the door locks if you try too start the car with after it’s been cut and copied it will turn on the green anti theft icon on the dash and it will start but turn right off you will still have to get it programmed this isn’t the best way to go i don’t understand what’s the purpose of this video unless you want a key that just unlocks your doors you can do this but it’s pointless if you ask me
Same
You gotta tear the magnet out of the old key
Lost the key and if you don’t have a copy will cost you &275 to get it made and program if you have the key cut with the remote will pay only 75 to program it maybe les
After the new key picked up the locking and unlocking function, the original key stopped working. Is this normal and what can I do to have both keys working.
Thanks for the video
I had to replace the ignition lock cylinder in my '03 Honda Pilot. Is there a way to reprogram my old fob with a new switch and key? The battery had died and I couldn't reprogram the fob with the old switch because it was difficult to turn and I wasn't able to complete the process in the amount of time needed. Thanks for any advice.
Thank u it worked
Do you have the link where you got/bought the spare key from? Great video by the way.
Got it from ebay. Thanks.
www.ebay.com/itm/For-2003-2004-2005-2006-2007-Honda-Accord-Keyless-Entry-Remote-Car-Key-Fob-/313111255308?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
This is only part of the solution: Even after doing all that, your car will NOT start. You must now program the ECU to start the car with the new key.
How do you do that?
Good video thanks
Working
I had to replace the immobilizer chip. How should I go about programming it?
Great video thanks. I need help with my original key which all the sudden can't open the door. Battery is new.
Thank you. There are few possibilities for what happened. Your car battery maybe very low or dead, the keys are no longer programmed ro your car or a faulty on the keyless system.
You can try to follow the same steps on my video after you checked the car battery and make sure you install the key fob's battery correctly.
If the keys are still registered, it should work. If not, Im affraid your keyless system is bad.
Good luck.
Can it be done on Civic 8th?
But will the key start the vehicle once the new blank is cut?
This is what i need answer for please answer out question
No
You are using a key that has not been cut will not it the key switch? Am I correct ?
Yes, you are right
but what if your new key dnt have those buttons? my old one did but not for new ignition
Nice video man. Wondering does this will works to the Honda 2007 civic type r FD2 too? Many thanks.
Bruh I want an FD2 type R that’s not fair 😔
Is that a OEM/Genuine honda key or a generic one?
Generic one from ebay
@@NorCalOutdoor Appreciate you responding, thanks.
@@CandleGuyFX you're very welcome, Bro
So would i be able to start the ignition if i get a key knowing my original key is lost so i need to get a new kit with kes , if i do the same steps would it be programmed to turn on the car or for that do i have to take it to a dealer ship please reply , i have been disabled for almost a month and I couldn’t offered it for dealer programming please reply i need help , they are charging too much even lock smith.
Unfortunately, you will not be able to start the engine, but only to operate the door lock. You will still need to go to lock smith. Sorry
Does this work with honda civic fd 2008?
Maybe work, but I haven't tried it yet, Bro
Great video.... Any chance you have a way to program a key to the car when you don't have one that works?
Unfortunately no, you will need a programming key and code
You will first need to get a working key from a Honda dealer (expensive), or find a local locksmith that does Honda key cutting and programming to do it (cheaper). Once you get a working key, you can then use the above video to program upto 3(?) keys/remotes to the car.
Or just tear the magnet out of the old key
@@CoroaEntertainment
so this is only to program the button on the keys
Does this method also programme the immobiliser chip?
Unfortunately not. Sorry
Will it also actually start the car is another question. The immobilizer chip has to match as well.
No, unfortunately not.
No. You will need to have a Honda dealer program the chip (expensive), or find a local locksmith that does Honda key cutting and programming to do it (cheaper).
@@NorCalOutdoor why dont u mention that in the video?
@@johnperez93640 Sorry forgot to mention that on video, but I have put it on the descriptions
If my key is programmed when I cut it it should work right
No. Gona need the magnet inside the original key
Does the trunk button works?
Yes, Sir
where did u buy the new key from
Ebay
@@NorCalOutdoor
how's the key holding up, did u ever get the key cut and program to start the car. A lot of keys on amazon and on ebay have mix reviews, some good and some bad... j/w
@hjkjccdggjhvb yes, I got it cut and still working. Remember this procedure is not for immobilizer, only good to open the doors and trunk.
@@NorCalOutdoor
yes, thk you..
GREATE
Go to a locksmith key will need coding to ignition as well.Duplicating a key will not start the car.
I have a remote control key that just stopped working, I bought a new remote and I can't program it. The car starts the engine and the alarm works normally. Help me
Did you replace the battery? Try to replace the FOB battery first and see if it works. Do not throw away the old key. You can move the immobilizer chips from the old one to the new one to make sure it is on the same frequency.
@@NorCalOutdoor I just changed the key's internal control, the electronic board. The immobilizer chip remains the same and works normally, the alarm works if I turn the key in the door handle but the control does not configure. I'm really sad that I couldn't do it :(
@Central dotNET Sorry to hear that. Usually, the remote control is the easy one. Maybe the Receiver Unit keyless entry was bad or not connected right.
All good and fine but it will not start car after you get the blank ground.
Yes, that's right
This will program the remote not program the chip to start the car
You are correct
I just programmed it and the car won’t turn on
Hi @Onessis, unfortunately it will only program the remote, but you will still need to register a new key to the car if it hasn't been registered yet. You will need a locksmith to do that
I PROGRAM REMOTE
AND ALL BOTTOMS WORK BUT IT STILL WONT START MY CAR
You will have a small chip in the old key that you need to move to new key. If you lost or threw old key away, you need to go to dealership to code it.
org indo? ajarin dunk TY
Iya bener. Boleh, sama2. Jangan lupa subscribe 😊
waduh pas bgt g br aje beli 06 accord. dealer mao charge $323an 😳😳😳😳
@@BasedGulagNationalist Sayangnya duplicate ini hanya bisa buat buka pintu, trunk, and panic button, tapi ga bisa untuk starter. Jadi sehabis di program, harus dibawa ke locksmith untuk di potong dan program. Mereka akan charge sekitar $60-$90 agar kuncinya bisa diregister di pcm.
ahh pk tetep hr ke locksmith ya TY banget. mayan kl bs ngirit duid 🙂🙏
@@BasedGulagNationalist BIasanya bisa. Pernah dicoba dengan bbrp mobil lain. Ga tahu knp ga bisa waktu dicoba. Jadi siapa2 aja kalau ga bisa, biayanya tetep jauh lebih murah drpd ke dealer.
Do not follow these imprecise instructions. They are missing a ton of detail needed to do no damage.
It will reprogram the Car, not the Key.