Corolla gets Steering Wheel Controls ( Part2) | Spiral Cable Wiring to Aftermarket Radio| 2009-2011
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Upgraded Toyota Corolla / Altis ( Base/ LE / XLE ) with OEM fit Steering Wheel Controls. No Interface module required.
Watch Part 1 (Full SWC installation): • Corolla gets OEM fit S...
Watch Part 3 (Fixed right control buttons): • Aftermarket Steering W...
Support my channel, purchase directly from our online store eazidiy.square...
*** Regular Transfer Cable : eazidiy.square...
*** Plug&Play Cable with 20-pin Harness: eazidiy.square...
*** Steering Wheel Button eazidiy.square...
![ง้อ (ALRIGHT) - FOURTH Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/Qs8ZeV6Dqj8/mqdefault.jpg)
![จบจนได้ ! | Black Myth: Wukong #007 [ตอนจบ?]](http://i.ytimg.com/vi/DSqvWndF0sw/mqdefault.jpg)
The "Disp" button is a separate wire (pin 3 on the adapter). it has a grey wire that goes to nothing on the female side. I connected a 160ohm resistor between the grey wire(pin 3) and the purple (pin 5). The resistor was more ohms than needed but it was what I had on hand. it just cant match the other buttons. now i use Disp button and mapped it to my front camera.
Awesome!
@danielbuck2430
hey buddy, so you're saying you didn’t get it to work for key 1 or key 2 input signals? Did you try connecting them directly?
And do you have a detail write up for how you wired your front camera to the display button?
really glad I've came across this. I'm aiming to do the same upgrade in my auris. And since auris and corolla are basically identical, I'll study this job beforehand :)
I am delighted you found this video helpful! Cheers
Hi, Have you managed to setup your Auris.... I have a 1.8L Auris. Do I need to buy the clock spring
@harold kayizzi You will need a clock spring for the installation
@@haroldkayizzi6013 I haven't yet
Thank you very much for making this video, I bought the transfer cable and a steering wheel with steering wheel controls and it works perfectly for me. thank you so much!
I am really glad the video was helpful. Thank you for your feedback! Enjoy 😉
Please send me the link on Ebay for the transfer cable and the steering wheel clock spring. I’m trying to update my 2011 toyota corolla LE audio steering wheel control. I bought the clock spring that did not fit the audio steering control switch connectors. Thank you.
I try everything without results. Today as per this video we cut the wires snd works great. I very happy and thanks for tutorial.
Thank you for the positive feedback. I am excited to know that the tutorial was helpful. Cheers!
I did this on my Auris. Didnt have to change anything cause my car have fabric preparation and i have already left buttons (+/-,prev track,nex track) so i addded right controls (call, stop call,voice control). Call and stop call work..but...voice control button on steering wheel dont work i mean at settings "steering learn" ,on android head unit ,when i press voice control dont want to set :(
I tried to set it for siri when im using carplay but dont work at all..
Does sby know the solution?
Depending the android radio, the mapping issues can occur.
Thank you very much, man. It was super useful. Well done.
You are welcome
Hello sir!what about toyota Auris 2013 model?Are the same numbers key1,2 and ground?Thank you very much
Yes, thesame keys, just that for 2013 model you have a 28 pin-out harness instead of 20 pinout harness in the video
@@eazidiy thank you very much!
@@irawindfall You are welcome.
Thank for making such informative videos. I was wondering what should i do to add steering controls to my first series toyota aygo. Should i just buy a new clockspring. What about the connection with the headunit? Your response would be very helpful.
Thank you very much
You will need to buy another clockspring and I have the steering wheel control and transfer wire on my online site eazidiy.square.site
Hi bro where did u attached the power light of steering button??
Connect it to an ACC 12V wire. Usually, it's a solid red wire if the radio harness.
Thanks
Thank you for your generosity. I appreciate it 🙏🏾
Hey buddy, i plugged in the controls and the adapter wire, but im having an issue.
I have 2010 corolla le
I try to learn the buttons on the radio, but the only ones it can sense are the talk, mode, hang up, and answer.
It keeps failing when I'm trying to teach the volume buttons, next/previous, and display button.
Could you help me out?
I already upgraded the whole steering wheel clock spring and everything.
Watch this video where I explained and fixed the problem th-cam.com/video/cdncyThnsVA/w-d-xo.html
Oh ok thank you. I will watch now
So I just watched it, im going to try this real fast, but i see you had problems with your calls button, I'm having problems with the volume. This fix should fix it?
@immbatman Yes, it will fix it.
Great content! Do you know where can i find those wires from spiral to radio for a mitsubishi lancer?
Hi unfortunately I don't. Thanks for tuning in
I did as per your instructoons, only one function perfomed by every steering button which is last learned functon, I did vol+, vol-, previous and next button but whichevere the last function I made learm only that function perfomed by all bttons . There is something with protocole, which proto col, I have same buttons and same car as yours
This issue you are experiencing could be from your radio. The SWC mapping maybe wrong
thank you from malaysia
You are welcome
Anyways to get the steering wheel phone buttons to interface with android head unit?
Hi, look at this link www.tehnomagazin.com/Auto-radio-car-connector/TOYOTA-Car-Radio-Wiring-Connector.htm go to Toyota 57101. The 6 pin harness, pin 4 is Tel/Mute wire. Cut the pin 4 wire between the harness and back of your radio. That should help you
My AC buttons aren’t working what should I do
AC button on steering wheel control???
I have a 2012 camry L that did not come with steering wheel controls. I added a new clock spring and steering wheel buttons from a Camry LE and have an identical android radio. Will this transfer wire work to make the buttons functional?
Unfortunately I am not sure if it will work. Can you show me picture of the pinouts of your clockspring? Email it to me eazidiy@gmail.com
the extra wire that u connected to the spiral how do u connect those if u dont find any plug like that to buy
Then you will need to know the pins for SWC 1 & SWC 2 and the GND on both the Spiral and the back of the radio
Really glad to found this video it helps me a lot. I cannot locate the steering wheel control ground from the 20 pins harness do you think it is ok to tap on any ground that i can use ?
Ground is pin 4. However, you can tap into any ground wire
@@eazidiy Thank you so much 😄
You are welcome
Anyone know where you can get this for a 2nd gen base Tacoma?
Unfortunately, I do not have that
Hi, i have a question, i asked you before is this process is possible in a 2002 camry to add steering wheel controls, i was looking at the 12 pin harness that must contain pins 4 gnd, 5 key 2 and 6 key 1, as i compared both harness yours and mine i was looking that i have the pins running differrently on my main harness i got pin 1, 2 and 3 i know pin 1 is horn trigger but i don't know wath are pins 2 and 3, so my question is what im suppossed to do? any chance that i can add the steering wheels controls to my 2002 camry? Sorry for my english is not very good, greetings from dominican republic
Pins 1 and 2 are for cruise control. Pin 8 is horn. Pins 4,6 and 6 are for steering wheel control. That is how my car is wired. I don't know how your Camry is wired.
Good job.
Thank you
are there any guides a for an older 2002 Toyota corolla? specifically my steering wheel controls dont work with my new android
Does your Android radio have the steering control functions? Do you have the key1,2 and ground for steering wheel control on the radio? If yes, you can connect it
i thought key 1 and 2 / ground came with the android itself, but I was wrong - i might need to rewire it most likely@@eazidiy
@@DedgyVanced Ok. Best of luck!
I have a Toyota Corolla 2013 xli model. Will i need the clock spring or just the wire for the stereo
I cannot independently confirm that for you. Do you have steering control already? If not you will need clockspring. Open the steering column and confirm if you have wires present for SWC.
What cable did you buy for the connection between radio and clock spring?
I have it available on my site eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
This extra wire you got, what's the name?
Steering wheel control transfer wire eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
The pin out on the spiral connector are wrong
?? They are correct!
Have question...i purchased. The audio control for steering wheel, new spring clock..have kenwood excelon dmx809s...also have pac swi cp2 steering wheel control adapter...do i need any other adapter?
If you have 2009-2011 Toyota Corolla LE, you will need the transfer wire eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
thank you just ordred
I received your order. It will be shipped Tomorrow! Thank you
iam ordering this. and it seems that you dont deliver it to Canada as its not supporting the address
Send me an email eazidiy@gmail.com. I can arrange shipping based on your address
@@eazidiy i have sent you the email address.
Yes, I got it
is it the same for the 2009 Toyota Camry Hybrid i bought the interface SER-61J because my original radio was JBL BUT STILL NOT WORKING THERE IS A PLUG HANGING IN THE CAR WITH 3 WIRES BUT IAM AFRAID TO CUT THE WIRES AND CONNECT THEM IT MAY CAUSE A SHORT
The 3 wires should have a pig tail of 20 pins? It most like the steering wheel control wires. If you count, the wires should be pin 6, 7 and 8.
I ‘am looking for the steering wheel control the rest of my Android radio works fine
First thank you so much for the quick reply
Send me the picture of the harness at eazidiy@gmail.com
Do you know the name or model number of the transfer wire I bought the controllers on Amazon but didn’t know about the wire that connects those to the radio?
Here is the link to buy the transfer wire eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false.
It is not sold on Amazon.
Whats for that red wire 12v connection?
Can I only plug Skey1 Skey 2 and ground wires?
Or 12v wire is mandatory?
The red wire connected to 12v is to illuminate the steering control buttons. You need it at night time drive. It is not mandatory.
@@eazidiy from which direction u got that 12v connection from the switch
Are you using the transfer cable? I don't understand your question.
@@eazidiy no im not using any transfer cable
Basically I got 3 wires but im asking about from which source you got that 12v illumination wire
@ahanafadil8723 That is pin 12
Hello! Can you show me where the wires connect to the headunit? I have the same headunit but my connector from the car comes with 28pin not 20pin. Thank you
What type of car is yours?
@@eazidiy i have the 2012 corolla. The wire that comes with my binize headunit is 20pin, the wire that comes from my car is 28pin. Should i just look for the key 1 and key 2? And if so, i would want to know where to tap it in the unit. Thank you. Your video gave me so much ideas but need to finalize it. Thank you
@@henriccasimiro9699 Hi, 2012 -2019 Toyota have different pinouts from 10th Generation Toyotas. I found the harness for you to buy on Amazon amzn.to/3HRyP6m. Pin 6,7 &8 are for your steering wheel control. Pin 6 (black wire is GND) , Pin 7 (Black/Green is Key2) and Pin8 (Green/Yellow is Key1). Connected them to your Key1&2 and Ground of your Binize radio
Hi bro, can i ask questions? My corolla doesn’t have steering control and i am trying to replacea steering wheel sports D type while installing i found out the old clock spring doesn’t have pin for the steering wheel control cable i need to replace the whole clock spring??
Yes, you must replace the clockspring to accommodate the new steering wheel control
@@eazidiy hello sir i got my new clock spring but it has angle sensor while my old clock spring doesn’t have even a wire for the angle sensor dont have.. it will works fine even without connection for the angle sensor?
@egiegalang1724 The angle sensor is detachable. Remove it
@@eazidiy i tried to installed it without removing the angle sensor since there is no cable to attached and looks fine it is okay if i’ll keep it as it is i will not having a problem in the future??
@@egiegalang1724 You wont have problem. Great to know you got it installed.
what the wire called bro? i want to buy online
eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
I added the controls to mine, Key 1 works but key 2 does not. I pined out the entire circuit from each button and connector to the radio. Key 2 still doesn't work. Any Clue why? Does your key2 connect to several other wires like mine appears to be wired? (Wired this way from the Android radio manufacturer). I can try removing the other connections. (pin 11 has multiple wires. The manual states this is a brown/black wire for key 2. but all wires are blue/black, I think they mixed the powered antenna with key 2. the colors appear to be swapped but everything else works...) Also my key 2 appears to always have a weak ground. I don't think this is supposed to happen. 2010 Corolla.
Also, When I swap the key 1 with key 2 wires the key 2 buttons work. So not the buttons.
EDIT: I snipped the one wire going into another plug. Key2 now works.
Which wire did you snip to allow key 2 to work? I have similar issues with other Corolla with Key2 not working
You can send me the details at eazidiy@gmail.com
@@eazidiy Sure, just sent you the details
Also just as a note, I took apart the right button controls, "DISP" button appears to be a separate circuit, so that button is the only one that doesn't work for me. It does not connect to Key 1 or Key 2. I might attempt to connect it to key 2, but I'm hesitant to be honest. I might have to compare the resistance against the other buttons, if its different enough, it might work fine connected to key 2
Hi I have 2012 Toyota Corolla S
And just bought same unit as ur pic but it's android 12
I have set up everything but my steering wheel control not working
I tried to set up just MODE BUTTON setup but my volume up and down and track next and previous but says failed wht would be the reason
Hi, let me get your question right. Your corolla S has steering wheel control buttons on the left side? Does those control buttons worked with your android 12 headunit? Now you bought control buttons for both sides of the steering wheel (same as in the video) and they are not working for thesame android 12 units except MODE BUTTON?
I have the same issue where either one side works or the other. Both sides never work at the same time
The issue is on the radio, some radio can only allow one SWC wire to work.
Thanks for the usefull info! If I have have the OEM radio in my base corolla, Can I only do the mods in PART #1 ?
Yes, you can. But you will have to see if your car has wires in pins 4,5 &6 of the clock springs Spiral Cable.
@@eazidiy I will probably have to buy a new clock spring but I am wondering if my oem radio is pre-wired for steering control
@@borderline666 for that please check with Toyota forum or manual. But, 2010 Corolla S comes with thesame OEM radio and steering controls for volume, skip and mode. I think it should work.
@@eazidiy Will try for sure, thanks!
@@borderline666 you are welcome
Will this work with a KENWOOD stereo?
Yes! As long as the stereo has SWC functionality.
Also what’s the extra lead for the steering wheel controls for? I saw it on the previous video but it wasn’t plugged into anything?
@ottomondo That is for cruise control plug
Please send me the links on Ebay for the transfer cables and the clock spring. I’m trying to upgrade my 2011 toyota corolla LE audio steering wheel control. I bought the audio steering wheel switch and the clock spring but the clock spring female connectors did not fit with the audio steering wheel switch male connectors. Thank you very much for your informative video clips.
I guess you bought the wrong clockspring. Unfortunately, the transfer wire isn't available on eBay ( best to my knowledge)
@@eazidiy You are right. Could you please send me the link to buy the correct clock spring and the transfer cable (cable that connect between the steering wheel and the aftermarket apple carplay unit). Thank you.
Clock spring www.ebay.com/itm/384977739629?_trkparms=amclksrc%3DITM%26aid%3D1110018%26algo%3DHOMESPLICE.COMPLISTINGS%26ao%3D1%26asc%3D20200818142238%26meid%3D5c64e74cec8a4fb184ab81e56ba9e8e7%26pid%3D101121%26rk%3D3%26rkt%3D12%26sd%3D175643929709%26itm%3D384977739629%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3Ddefault&_trksid=p2047675.c101121.m1986&amdata=cksum%3A3849777396295c64e74cec8a4fb184ab81e56ba9e8e7%7Cenc%3AAQAIAAAA4H8Vg%252FDTG48OUqG6jmBF8cOKyVVOk2xQSVirIJ0CQF%252BkAOIsBl%252BdljAVxa%252F8S7Tmay7cHB%252BTeF0Iq2dSFi7Zcf2UuMSRBwliBeanTy0DaxTkNZCrlpRXrJnDjymX76rXWneKIT0X522bRTfOV0XsIkxB3Zuq9hYEcYeAi0uIzlss7t5P3B045EOjp%252BY7k%252By4UfeLVUTFvpVA6UTqmgVdLICnH8FDnyXX9fR7bBXjXHlTNWSCw3h8fE5NnJzaXt6vNZ9KBZid3NB4X%252FSqgCkExL%252F22i6PffsHP2sBUULiqogF%7Campid%3APL_CLK%7Cclp%3A2047675
Transfer cable:eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
I found another slightly cheaper www.ebay.com/itm/394204647439?_trkparms=amclksrc%3DITM%26aid%3D1110018%26algo%3DHOMESPLICE.COMPLISTINGS%26ao%3D1%26asc%3D20200818142238%26meid%3D5c64e74cec8a4fb184ab81e56ba9e8e7%26pid%3D101121%26rk%3D5%26rkt%3D12%26sd%3D175643929709%26itm%3D394204647439%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3Ddefault%26brand%3DCustom&_trksid=p2047675.c101121.m1986&amdata=cksum%3A3942046474395c64e74cec8a4fb184ab81e56ba9e8e7%7Cenc%3AAQAIAAAA4H8Vg%252FDTG48OUqG6jmBF8cM9Wdy0Xk0T%252BJvkLPzusEFTwuElijkNMo0imS2Tza7qDNW7cMK%252FK6A%252FErnxFtL%252F2pfvcMYkZ6gJ%252BIhSWX%252FDIIpioI6%252F%252FFv7R1K9Oir0CKGr2z0EAHS%252Bds%252BPDLL18kVTj3AlTs0coW2sn701al1jyayMTfjElbXo8UfBlKqX0J3cZr3dn44K3dxkqcXldCUx1wTYGlZCmq1jb9s42enmKG6O9fUsmwv2%252B224EFGXomsH5c6L5Tv1JAq2kUWipPSRoxAp2sSrynWeZX3BcPx5zjlM%7Campid%3APL_CLK%7Cclp%3A2047675
If my corolla already has steering wheel controls, do I have to buy the wire that you used, or will my car already have it? I have a 2011 Corolla S for example.
Your corolla S have the wire. You don't need to buy the Spiral Cable
@@eazidiy ok nice. So all I do is plug it into my head unit? Or is there anything else involved?
Plug all wires into the headunit including the factory harness for steering wheel control. Then go to Steering wheel control setting in your headunit and configure the buttons.
@@eazidiy ok thanks!
You are welcome
Please my car Corolla Altis 2009 model
It doesn’t have steering wheel control, what kind of Clock Spring should I buy?
I will be glad if you send me the link @AliExpress
Thank you.
Already answered this question in your previous post
@@eazidiy
Yeah
Thank you very much for your kindness
You are welcome bro!
@@eazidiy
Good morning Boss
Trust you are doing good,
Please do have an idea on how to fix an after market Cruise Control in Toyota Corolla Altis 2009 ?
Good morning! I am well, how about you? Did u get the steering wheel control installed? Unfortunately I do not have cruise control installed in my corolla. You may check on TH-cam on how to. Maybe later I can install in my mine and do a video
What's the extra wires called?
Spiral transfer wire
Thanks alot
Where can one get it?@@eazidiy
eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
What stereo is that?
www.aliexpress.us/item/2255799973184535.html?spm=a2g0o.store_pc_groupList.8148356.23.22bd28abRvRpR6&pdp_npi=3%40dis%21USD%21US%20%24210.57%21US%20%2498.97%21%21%21%21%21%402103225116886591610634864e16d7%2112000030141220630%21sh%21US%213962034193&gatewayAdapt=glo2usa
Android radio 4GB RAM
Oh it's from aliexpress. How is it now? Working well?
@Ryu12-zz5sg Yes. 2 years strong
Where is the red wire on the clock spring spots connector?
Tap and Connect it to your radio ACC+ wire. It will be red wire on your radio, it is 12v ACC+
Thanks for the reply but I didn’t buy the transfer wire but I was able to tackle it without it. I manually put in 3 pins (4,5,6) for the 12 pin connectors. Now I need to figure out which pin # for the light.
That is awesome that you are able to add pins into the tail pig of the harness. Pin 12 is the light, the red wire is just below pin 6.
Let me if it works for you.
@@eazidiy thank you. I really appreciate it. I bought the transfer wire when I saw you video as a back up. I will keep you posted.
Hello 4Runner 4gen same your car?
I can't confirm that, but check if the clock spring is thesame Corolla and 4Runner
Thanks, but I don’t know what’s model buy
Unfortunately I don't have a 4runner. You should look online for your specific car.
I have a corolla CE do i need to get the cable?
Two ways you can confirm are:
1. If you have a steering wheel control already you do not need it.
2. You have to open the steering wheel column and check if you have existing wires in pins 4,5&6 of your clock spring.
I dont have the radio receiver connector( the connector with 20 pins that u found from your radio)
Can i just buy the cable from ali express and from the clock spring to the stereo and connect it to key 1 and 2 and ground?
@@faaygoo Yes, that is exactly what I did in the video. I connected the wires directly to key1&2, ground and ACC.
@@faaygoo That is fine, your car has a less option. Just connect the wires directly to your android radio as I did in the video
How about the ac control?
What A.C control? It is just for controlling the android radio
Do you mean cruise control? If yes, you need to buy that separately.
@@eazidiy I mean the right side steering wheel buttons to control the air conditioner temperature.
The control buttons don't have that function
@@reezwanulhaqueeashan1423 That's only available in Camrys, not Corollas.
Where I can buy that cable?
eazidiy.square.site/product/steering-wheel-key-switch-transfer-wire-for-toyota-corolla-altis-auris-e150-e180-2006-2013/6?cp=true&sa=true&sbp=false&q=false
There 2 types, one with 20 pin adapter for Toyotas and the one without 20 pin adapter
Thanks
I have a 2009 Matrix whatever is good for my car
@@josecolon2691 Yes, the spiral transfer cable will work for matrix too.
Do you deliver to Ireland?
I’m having trouble ordering from your site.
I can my that for you if you will pay for shipping. Send me an email eazidiy@gmail.com