Hi mate, just had a very similar install on my wife's clio, she's got the 10 inch junsun head unit, the guy couldn't get the steering wheel controls, any chance you could possibly help me via email or something if I get the stereo out and take some pics etc.. I would be extremely grateful.
Hi man, so ground we taking from main connector right and using one of the cable(key 1 or key 2) to connect to OEM swc input. But in which case we gonna use both of the cables? My car has total 6 buttons 3 on each side of the steering wheel. In this case should I connect key 1 and key 2 to the same input?
@@jonathandale5350 Thanks for your reply :-) on my Mondeo the brown/yellow wire for the steering controls is 'steering control ground'. I'll give it a go a bit later see what happens. thanks again :-)
I too have column mounted Steering control in my car like yours. It is connected to geen+brown and yelloy+brown wires. Can you please tell me which one of these i need to connect to key 1 and key 2? Any harm in doing trial and error ?
I install a dual DV271BT to 2014 subaru forester.. The head unit has built in swc interface...the harness has Swc1 (brown) swc2 (brown black ...where do I connect it to
How does one find these wires? Im trying to get wires ready in my 04 Cadillac SRX for a double din swap and i DIY'd the rest of the wiring, im not stoping now, i have only 1 steering wheel control wire coming to the factory unit, would there be a 2nd one i need to tap into or would the wire on the stereo harness itself work for me at all? Any information is helpful, this car has been a nightmare
It's both radio and vehicle model specific. More modern cars have the controls going through the CAN bus, for those a module and custom harness will be required.
hey bro how did you decide which of the 3 wires to attach the ground to. also how can i identify my steering wheel control wires if i do not have a wiring diagram
I was so excited to do this! But I realized that I might short circuit a lot of things in the car. Possibly the whole electrical system can be fried. Can anyone reassure me that it won’t so I can proceed with my Toyota Tacoma 2011 base.
This will not fry anything In Your car all you are doing by doing this is bypassing the need for an expensive plug, think of it this way, if it blows then the worst thing to happen is a blown fuse, just disconnect it and replace the fuse :)
I need to do this.. but i have a car that not sure ill be able to do it on.. lol A 2009 Saab 9-3.. if anyone has done it or is able to help me please reply. Thanks.
Finally someone that really make everything so easy thank you man
Thank you man! I did it in my Ford Focus MK2 and still works. I'm so grateful 😊😁
Glad I could help mate that's what it's all about :)
was it key1 or key 2 bud on the focus?
About to try this right now.. If this works you are a freaking hero!
Well?
Yeh did it work
Yes it's working
Nagyon szépen köszönöm, most bekötöm, remélem, működni fog :) 1000 köszi a segítséget!!!!!!!!!
semmi gond a barátom szólt nekem, hogy megy
@jonathandale5350 nekem is jó, 10000 köszönet
Genious bro! U Are only one who help me! Thanks!
Nice! You explain it so beautifully. This information help me a lot, Thanks a lot for making this video 👏👏👏👍❤
Did it work for you??
Man Thanks A Lot Soo Much I Mananged To Do Same On My Mazda 3 2005 BK. THANKS A TON :D
you help me a lot
outstanding mate!!!
nice job m8 im installing one now ill give it a try.
Wow....good Job. Have the same Problem with my Renault Kadjar. Which PINS i have to connect ? How i can find out wiihich PINS ? Thx
thanks man
Hi mate, just had a very similar install on my wife's clio, she's got the 10 inch junsun head unit, the guy couldn't get the steering wheel controls, any chance you could possibly help me via email or something if I get the stereo out and take some pics etc.. I would be extremely grateful.
Sorry for the long wait dude, feel free to email me and we can figure it out jonbb9300@live.co.uk
Thank you man ,👍
This is for a Ford, do you think it may work the same in a Nissan?
I can't see why not
Hi man, so ground we taking from main connector right and using one of the cable(key 1 or key 2) to connect to OEM swc input. But in which case we gonna use both of the cables? My car has total 6 buttons 3 on each side of the steering wheel. In this case should I connect key 1 and key 2 to the same input?
Do you think I could make this with a JVC KD981BT and with a Fiat Grande Punto 1.3 199 2007? Thank you
If it has a swc plug yes for sure
Hi, I have a wire from the back of my Kenwood that says 'steering wheel controls', not key 1 or key 2. Do you think it would still work?
Yes mate some are labelled that way but it's all the same thing, I have seen this before to
@@jonathandale5350 Thanks for your reply :-) on my Mondeo the brown/yellow wire for the steering controls is 'steering control ground'. I'll give it a go a bit later see what happens. thanks again :-)
@@1971rosalie did it work?
I too have column mounted Steering control in my car like yours. It is connected to geen+brown and yelloy+brown wires. Can you please tell me which one of these i need to connect to key 1 and key 2? Any harm in doing trial and error ?
That worked a treat! Ty man
I install a dual DV271BT to 2014 subaru forester..
The head unit has built in swc interface...the harness has Swc1 (brown) swc2 (brown black ...where do I connect it to
You need to follow the video, I belive you only need to use swc1 but I maybe wrong with that
8f you need more help, email me jonbb9300@live.co.uk
How to connect my steering wheel mux 2016 bro help
How does one find these wires? Im trying to get wires ready in my 04 Cadillac SRX for a double din swap and i DIY'd the rest of the wiring, im not stoping now, i have only 1 steering wheel control wire coming to the factory unit, would there be a 2nd one i need to tap into or would the wire on the stereo harness itself work for me at all? Any information is helpful, this car has been a nightmare
This will work, is the same to ford mondeo mk3 from 2003? Or do I need 1 autoleads adapter unit?
Best wishes, thank you for sharing your knowledge.
Hi, I would like to know this answer too. Any news here?
Hi . Really v nice . Can u please help me I have same joystick ford focus 2005 . Can I apply same method?
Yes u can
Only 55k views come on Jon boy lol
New one now John boy
th-cam.com/video/fCj424O5T_o/w-d-xo.htmlsi=xpxq9GvKxDrnsqz3
Hi dear friend, do ya think it applies for pioneer also
Yes it will work for any stereo
It's both radio and vehicle model specific. More modern cars have the controls going through the CAN bus, for those a module and custom harness will be required.
@@SerenoOunce Mondeo MK3 with canbus,this 2 wire on video, and Change resistor in steering wheel ,work with 2 din aftermarket car radio.
VOL-
23.6 kΩ
VOL+
16.8 kΩ
SEEK+
10 kΩ
SEEK-
4.7 kΩ
MODE
1000 Ω
@@danijelvujnovac6288 hello, thank you for sharing your knowledge.
@@danijelvujnovac6288 can you explain more about that??
hey bro how did you decide which of the 3 wires to attach the ground to. also how can i identify my steering wheel control wires if i do not have a wiring diagram
Inbox me
I was so excited to do this! But I realized that I might short circuit a lot of things in the car. Possibly the whole electrical system can be fried. Can anyone reassure me that it won’t so I can proceed with my Toyota Tacoma 2011 base.
This will not fry anything In Your car all you are doing by doing this is bypassing the need for an expensive plug, think of it this way, if it blows then the worst thing to happen is a blown fuse, just disconnect it and replace the fuse :)
Also, I emailed you back :)
Could just add an inline fuse just incase
i have 4 wires in mine
I need to do this.. but i have a car that not sure ill be able to do it on.. lol A 2009 Saab 9-3.. if anyone has done it or is able to help me please reply. Thanks.
Email me jonbb9300@live.co.uk
i dont know what wire key wire is i did ground wire
What car have you got mate?
ford focus mk1 @@jonathandale5350
ford focus mk1 @@jonathandale5350
☆☆☆☆☆☆☆
Bro, I have this problems. I have Peugeot 207 and aftermarket head unit. May I email you for help?
Yes mate jonbb9300@live.co.uk
@@jonathandale5350 I sent you e-mail mate.
Did you succeeded making it work?
Hey bro, can I contact you?? Do you have an email or something like that?
Yes mate jonbb9300@live.co.uk
@@jonathandale5350 thanks! I sent you an email