Grey I went to Illumination, which is the dimmer switch power. It's supposed to be for the lights in the switches but they didn't work for me. Possibly bulbs burned out on my set
I've been sitting on this 90% edited video for a couple years now.. finally finished and uploaded. That gives plenty of time to give a review on how it turned out. Still working some years later. Only recently have the buttons started to stop responding to pushes but it happens randomly. I'm pretty sure the wire I inserted into the back of the head unit is probably loose and loses contact now since I drive on terribly rough roads every day and everything shakes all the time. With a proper connection there I'm sure it would be good to go. The lights for the buttons never did work with power applied, so I expect they may be burned out since I bought these parts used. Also check the video description for other videos I posted. There is a way to install the newer style wheels (2003-2006 style) onto these trucks which may be a better way to go since the clocksprings and buttons for this style of wheel are rare and no longer produced.
So that one wire going to the back of the radio does all of the different functions? Very cool. Does the 2003+ use the same green wire to send the signal?
@@MoneyManHolmes You probably already figured this out... but I'm not sure about the 03+, they changed a lot of the wiring starting in 03. For a lot of electrical functions you have to keep within the same years block, so 2000-2002 are typically the same, and 03-06 are the same.
And yeah, the wiring is all different, but if steering wheel radio controls use a single signal wire, then I think there’s a slight chance it could work. Especially since aftermarket radios can easily be adapted to work with them.
Good video, I have been thinking about adding this to my truck. I have come across these controls a couple times in some blazer and the parts yard. I may have to try this out.
If you grab the whole wheel with bezel and the clockspring you are pretty much good to go. Junkyard surfers will definitely have a better time of finding these, the wheel with buttons still pop up on ebay, but finding the clockspring would likely be much harder online.
If you are changing the headunit it shouldn't matter what trim your truck has. It should be possible for these to work with a new screen, but you will have to get an adapter harness that will "interpret" the steering wheel controls to your new head unit. I think PAC makes a basic programmable SWC (steering wheel control) adapter box, Metra might have one, and the best one is probably from iDatalink (Maestro). So there are options, but I don't know the specific compatibility with these controls.
awesome video. wiring a little different on my 99. hoping to connect the factory SWC to aftermarket interface. @19:40, the 99 service manual has #6 and #7 phrased differently than your image. #6 - PPL/WHT - 1382 - "led dimming signal" ... #7 - GRY - 8 - "Instrument Panel Lamp Feed". I am assuming and intenting to connect the GRY/BLK wire from SWC plug to #7/GRY
@@mipakr Nice. The backlights didn't work on mine either, but I don't know if the bulbs were burnt out and I never investigated further once they were working.
@@silentbravo totally agree. no real desire to rip it all apart again. i haven't braved tapping in to the aftermarket ready power you pointed out in the video. do you have any other videos on this? i visually upgraded my WT, but have not ran power.(vanity mirrors, overhead console, power locks, door lights)
Not easier, you have to disassemble the column farther and replace the upper shaft inside it. There is a good video about it here th-cam.com/video/AotnBSB6cMw/w-d-xo.html But it may be more worthwhile since you can actually buy replacement 03+ wheels and the buttons for them. The buttons for these are factory only parts and pretty rare anymore.
I'm not sure but I think the wiring may be the same or similar. It's really about the clockspring and from 03 and up they switched to CANBUS style communication for a lot of the electrical, so 02 and older isn't compatible for many things. If the newer style wheel and clockspring have the same 4 wires, then I would expect it would work.
Oh yes these almost certainly came in the early year Cadillac's, possibly even the cars. I think you may also look at GMC Envoy's some of them had high trim packages, possibly named Denali as well and could have come with these. Although I'm not sure when the Envoy started production I saw some of them had similar steering wheels in pictures.
The extra wires for the steering wheel controls are part of the clock spring. You have to get the specific clock spring that goes to steering wheel controls. It has the 4 extra wires attached to it. With a factory setup those 4 wires end with a connector that must attach to a radio (head unit) subharness up behind the HU. My radio didn't have that harness pigtail anywhere, so I had to connect them all myself, and only 1 (green wire) goes into the head unit anyway. Not going to do cruise control switch install video, there has to be several of those already out there. Probably how I learned how to put mine in.. haha
Im currently doing this. the rear steering shroud can be found in black in the mid size 99-05 jimmys/blazers/bravada, instead of chopping up the back to make the buttons fit. Anyway, ive been having quite the trouble getting these buttons working with a sony head unit, ive tried with and without a pac, Verified that all the buttons get voltage and drop voltage on the data wire when depressed. The sony xav-ax5600 isnt registering the programming when i go to program them in the head unit. Probably going to have to have a pro look at it
Yeah those models shared the same wheel, but probably also rare for them to have had the steering wheel controls too. I would think the PAC would get you going there, maybe look into the iDatalink Maestro products if your head unit is compatible. I think those are the top of the line adapters.
@@silentbravothe real trick is finding a set of buttons that havent been rubbed off by someones greasy fingers, had to find 5 sets to finally get a clean pair
I think I ended up figuring it out. I actually found an 02 Denali wheel with controls and I ordered a clockspring from the same year vehicle but the dumb seller sent me an 03 so I have to either wait two weeks til they are back or order another one so I can get started. But verifying the four connections would be appreciated…. I personally don’t like cutting wires…. Is there any way to maybe find the male side of the plug to splice it? Any chance you can pull stamping numbers off the cut plug
It depends on the head unit, it's only a single data wire which is really basic. You may have to use a PAC SWI module to interpret the signal for a head unit
Both harnesses go to the factory head unit. One harness has all the speaker channels and other functions for basic radio operation, and the other harness is for an auxiliary source, which was a cassette tape player in my truck, but could also be a cd player I think in some configurations from factory.
I think those have the same style steering wheel? But I don't know about how interchangeable the clockspring would be, or interfacing with a radio (unless aftermarket, then it's fine with the correct adapters)
This doesn't have anything to do with cruise control, that function is in the multifunction stalk (blinker stalk). The wires come out under the steering column and I made the connections there, seen in the video starting at 17:00
Yo man quick question where did you find that clock spring with the 4 way connection and audio buttons because my truck has the audio buttons and the four way connection but I can't find it for my make and year model I drive a 2002 gmc sierra denali 1500 regular and no one has it not the dealership not oreilys not auto zone or nappa plus advanced auto parts doesnt have it and it's all original to so I dont get it by any chance do you have the part number or where did find it because I looked everywhere and some of the Cadillac escalades have them but no luck finding them I just keep getting the wrong part
You can only find them used, and they are rare because they were used for only a few years on limited vehicles. Setup notifications on Ebay or start looking at junkyard inventory for models that would have the parts. For the switches you can watch ebay for the whole steering wheel and have better luck finding those. The clockspring is the real unicorn. I will check later I might have a picture with part number to give you.
The clockspring I bought supposedly came from a Tahoe/Yukon Denali, there are 2 part numbers on it. One seems to be the generic part number: GM 26088278, and the more specific part number is this one GM 26088320. Good luck in search.
@@silentbravo thanks man and I already have those two part numbers but they still cant be found I've been searching that part number left and right and nobody and not even ebay or 3rd party websites have them plus with the junk yard its gamble because most of them already been parted out and sometimes the people at the junk yards dont care if the clock spring breaks by rotation when there taking off the intermediate shafts or the entire steering column but I'll check if they have it because I rather have it new then used
New Body Style. Typically it is for years 99 to 2006 (and including 2007 classic, some didn't change body style from 06). 88-98 would be Old Body Style, and 07-2013 would be New New Body Style NNBS... kind of dumb on that one lol
@@silentbravo ok so i have a 2000 yukon xl 1500 slt……..so it would be a NBS. “99-06” (07 gets wierd) 08 then newer But in the hidden mix 99-02 and 03-06 have different wiring or upgrades? For example 99-02 cluster cant be used in 03-06? Im new to this body and trying to catch up thank u for the help
@@quickprofitautoworks correct on the wiring. They went to CAN BUS style electrical in 03, so a lot of the electrical is different from 99-02. On the body side, trim and panels, drivetrain are mostly the same within 99-06
I bought it used with the steering wheel controls on ebay. I'm pretty sure they don't sell them new, the controls or the clock spring, so you have to look for Denali trim tahoe/yukon/suburban in those 2-3 years to find them. Can watch ebay too but probably rare to find.
great video with attention to detail from the brofessor
Green > radio
Yellow > +12v
Black > ground
But what did you do with the gray wire bro ? Any spots you recommend running that to ?
Grey I went to Illumination, which is the dimmer switch power. It's supposed to be for the lights in the switches but they didn't work for me. Possibly bulbs burned out on my set
For anyone repeating this just use rivets. Over time those screws will work themselves loose and rattle.
I've been sitting on this 90% edited video for a couple years now.. finally finished and uploaded. That gives plenty of time to give a review on how it turned out. Still working some years later. Only recently have the buttons started to stop responding to pushes but it happens randomly. I'm pretty sure the wire I inserted into the back of the head unit is probably loose and loses contact now since I drive on terribly rough roads every day and everything shakes all the time. With a proper connection there I'm sure it would be good to go. The lights for the buttons never did work with power applied, so I expect they may be burned out since I bought these parts used. Also check the video description for other videos I posted. There is a way to install the newer style wheels (2003-2006 style) onto these trucks which may be a better way to go since the clocksprings and buttons for this style of wheel are rare and no longer produced.
So that one wire going to the back of the radio does all of the different functions? Very cool.
Does the 2003+ use the same green wire to send the signal?
@@MoneyManHolmes You probably already figured this out... but I'm not sure about the 03+, they changed a lot of the wiring starting in 03. For a lot of electrical functions you have to keep within the same years block, so 2000-2002 are typically the same, and 03-06 are the same.
And yeah, the wiring is all different, but if steering wheel radio controls use a single signal wire, then I think there’s a slight chance it could work. Especially since aftermarket radios can easily be adapted to work with them.
Good video, I have been thinking about adding this to my truck. I have come across these controls a couple times in some blazer and the parts yard. I may have to try this out.
If you grab the whole wheel with bezel and the clockspring you are pretty much good to go. Junkyard surfers will definitely have a better time of finding these, the wheel with buttons still pop up on ebay, but finding the clockspring would likely be much harder online.
@@silentbravo I wpuld assume the Blazer Jimmy Bravade clockspring works in my stock column?
How hard would it be to make this work on a base model with a aftermarket screen double din radio?
If you are changing the headunit it shouldn't matter what trim your truck has. It should be possible for these to work with a new screen, but you will have to get an adapter harness that will "interpret" the steering wheel controls to your new head unit. I think PAC makes a basic programmable SWC (steering wheel control) adapter box, Metra might have one, and the best one is probably from iDatalink (Maestro). So there are options, but I don't know the specific compatibility with these controls.
@@silentbravo thanks for the response I’m definitely going to try it on my single cab
awesome video. wiring a little different on my 99. hoping to connect the factory SWC to aftermarket interface. @19:40, the 99 service manual has #6 and #7 phrased differently than your image. #6 - PPL/WHT - 1382 - "led dimming signal" ... #7 - GRY - 8 - "Instrument Panel Lamp Feed". I am assuming and intenting to connect the GRY/BLK wire from SWC plug to #7/GRY
Yeah I wouldn't be surprised if 99 was a bit different, that was first year for GMT 800 had a few electrical differences
Well, I got it working except for backlight. Good nuff!
@@mipakr Nice. The backlights didn't work on mine either, but I don't know if the bulbs were burnt out and I never investigated further once they were working.
@@silentbravo totally agree. no real desire to rip it all apart again. i haven't braved tapping in to the aftermarket ready power you pointed out in the video. do you have any other videos on this? i visually upgraded my WT, but have not ran power.(vanity mirrors, overhead console, power locks, door lights)
@@mipakr check this page for info about the RAP www.silveradosierra.com/threads/how-to-using-the-mbec-for-powered-accessories.629778/
I wonder if it would be the same difficulty to swap the cateye steering wheel with the controls as it is to do this
Not easier, you have to disassemble the column farther and replace the upper shaft inside it. There is a good video about it here th-cam.com/video/AotnBSB6cMw/w-d-xo.html
But it may be more worthwhile since you can actually buy replacement 03+ wheels and the buttons for them. The buttons for these are factory only parts and pretty rare anymore.
@@silentbravoyour Goated for this reply imma do that this summer how much do you think I should save up to make sure I can afford it all
@@Arc-Angel I don't know on the cost, if you're doing the 03 wheel swap just buy a full used steering column I think, maybe $150-300
@@silentbravo yea I also need to upgrade audio at the same time so I can link the steering wheel and head unit
@@silentbravo cus I also need to swap the dash with one with a DIC which idk if that possible honestly
Can this same process work if I use a steering wheel with integrated controls like from a cat eye truck?
I'm not sure but I think the wiring may be the same or similar. It's really about the clockspring and from 03 and up they switched to CANBUS style communication for a lot of the electrical, so 02 and older isn't compatible for many things. If the newer style wheel and clockspring have the same 4 wires, then I would expect it would work.
Sounds good thanks!
Do you think the Cadillac escalade? CS is the same it looks like it all their wheels had same radio controls as chevy thx for your help
Oh yes these almost certainly came in the early year Cadillac's, possibly even the cars. I think you may also look at GMC Envoy's some of them had high trim packages, possibly named Denali as well and could have come with these. Although I'm not sure when the Envoy started production I saw some of them had similar steering wheels in pictures.
Where did you get the wires for the steering wheel controls and are you going to do a video about the cruise
The extra wires for the steering wheel controls are part of the clock spring. You have to get the specific clock spring that goes to steering wheel controls. It has the 4 extra wires attached to it. With a factory setup those 4 wires end with a connector that must attach to a radio (head unit) subharness up behind the HU. My radio didn't have that harness pigtail anywhere, so I had to connect them all myself, and only 1 (green wire) goes into the head unit anyway.
Not going to do cruise control switch install video, there has to be several of those already out there. Probably how I learned how to put mine in.. haha
Can we see a video of the controls working and I know you have six does the controls work with the aux?
Im currently doing this. the rear steering shroud can be found in black in the mid size 99-05 jimmys/blazers/bravada, instead of chopping up the back to make the buttons fit.
Anyway, ive been having quite the trouble getting these buttons working with a sony head unit, ive tried with and without a pac, Verified that all the buttons get voltage and drop voltage on the data wire when depressed. The sony xav-ax5600 isnt registering the programming when i go to program them in the head unit. Probably going to have to have a pro look at it
Yeah those models shared the same wheel, but probably also rare for them to have had the steering wheel controls too. I would think the PAC would get you going there, maybe look into the iDatalink Maestro products if your head unit is compatible. I think those are the top of the line adapters.
@@silentbravothe real trick is finding a set of buttons that havent been rubbed off by someones greasy fingers, had to find 5 sets to finally get a clean pair
@@whit4446 Did you ever figure this out? I have a sony carplay unit and I would like to get these put in my truck.
Hey I have a couple questions for you if you are still monitoring this channel....
Go ahead
I think I ended up figuring it out. I actually found an 02 Denali wheel with controls and I ordered a clockspring from the same year vehicle but the dumb seller sent me an 03 so I have to either wait two weeks til they are back or order another one so I can get started. But verifying the four connections would be appreciated…. I personally don’t like cutting wires…. Is there any way to maybe find the male side of the plug to splice it? Any chance you can pull stamping numbers off the cut plug
What is need for those to work on an aftermarket stereo
It depends on the head unit, it's only a single data wire which is really basic. You may have to use a PAC SWI module to interpret the signal for a head unit
What is the other wiring harness for in the radio cavity?
Both harnesses go to the factory head unit. One harness has all the speaker channels and other functions for basic radio operation, and the other harness is for an auxiliary source, which was a cassette tape player in my truck, but could also be a cd player I think in some configurations from factory.
Does this still apply to a truck that didnt come stock with a cassette player
Yes this should still work. Where the green data wire goes into the stock head unit might be different with a different factory head unit though.
I want it on my 1997 obs silverado
I think those have the same style steering wheel? But I don't know about how interchangeable the clockspring would be, or interfacing with a radio (unless aftermarket, then it's fine with the correct adapters)
Where did you the wire for the controls how did you hook up cruise
This doesn't have anything to do with cruise control, that function is in the multifunction stalk (blinker stalk). The wires come out under the steering column and I made the connections there, seen in the video starting at 17:00
Yo man quick question where did you find that clock spring with the 4 way connection and audio buttons because my truck has the audio buttons and the four way connection but I can't find it for my make and year model I drive a 2002 gmc sierra denali 1500 regular and no one has it not the dealership not oreilys not auto zone or nappa plus advanced auto parts doesnt have it and it's all original to so I dont get it by any chance do you have the part number or where did find it because I looked everywhere and some of the Cadillac escalades have them but no luck finding them I just keep getting the wrong part
You can only find them used, and they are rare because they were used for only a few years on limited vehicles. Setup notifications on Ebay or start looking at junkyard inventory for models that would have the parts. For the switches you can watch ebay for the whole steering wheel and have better luck finding those. The clockspring is the real unicorn. I will check later I might have a picture with part number to give you.
The clockspring I bought supposedly came from a Tahoe/Yukon Denali, there are 2 part numbers on it. One seems to be the generic part number: GM 26088278, and the more specific part number is this one GM 26088320. Good luck in search.
@@silentbravo thanks man and I already have those two part numbers but they still cant be found I've been searching that part number left and right and nobody and not even ebay or 3rd party websites have them plus with the junk yard its gamble because most of them already been parted out and sometimes the people at the junk yards dont care if the clock spring breaks by rotation when there taking off the intermediate shafts or the entire steering column but I'll check if they have it because I rather have it new then used
@@ssrodz3158 still looking for a clock spring
? I have several available of 01-02 denali and 02 Escalade, fits 99-02 NBS
Sorry for the noob question……but what those nbs stand for.? Is that the 99-02 code?
New Body Style. Typically it is for years 99 to 2006 (and including 2007 classic, some didn't change body style from 06). 88-98 would be Old Body Style, and 07-2013 would be New New Body Style NNBS... kind of dumb on that one lol
@@silentbravo ok so i have a 2000 yukon xl 1500 slt……..so it would be a NBS. “99-06” (07 gets wierd) 08 then newer
But in the hidden mix 99-02 and 03-06 have different wiring or upgrades?
For example 99-02 cluster cant be used in 03-06?
Im new to this body and trying to catch up thank u for the help
@@quickprofitautoworks correct on the wiring. They went to CAN BUS style electrical in 03, so a lot of the electrical is different from 99-02. On the body side, trim and panels, drivetrain are mostly the same within 99-06
@@silentbravo aghh thanks for the help
Hello where did you get the upgraded clock spring
I bought it used with the steering wheel controls on ebay. I'm pretty sure they don't sell them new, the controls or the clock spring, so you have to look for Denali trim tahoe/yukon/suburban in those 2-3 years to find them. Can watch ebay too but probably rare to find.
@@silentbravo thank you
Dude that's complicated. I wouldn't do it.