Finally, a simple, clean and to the point video. I appreciate you doing this. People have made this swap out to be like you need to collect all 7 Dragon Balls. You got a new sub… Damn, I just realized this is 3yrs old. I wonder how come I never found this before??? Better late then never…
Not that this isn't a cool mod to do, I do have one alternative if you guys are looking to make your car stop better. Look into the BR9 brake package. There is even a forum thread on the BR9 swap with part numbers and everything. I mention this because this particular mod is going to set you back quite a few bucks and the alternative is significantly cheaper. Don't have to change spindles, you get 14.5" fronts where brembos can be either 14.2" to 15" depending on what model it come off of. The trade off is this, you get 2 piston cast iron calipers. These are the same brakes that come on all 2014.5 and up Charger Pursuit cars so parts are dirt cheap all things considered. Good vid though man. You didn't overcomplicate it. Just down and dirty. Liked your vid on the exhaust overrun too.
In Canada our bone yards have decent deals on different brembos but cost wise the br9 is the best bang for buck. You just don't get the red block calipers.
I haven't turbocharged my SXT yet, but damn, for flare I think I'd definitely want to upgrade to this, I've noticed how meh the stock brake rotors have looked
Quick question will 2007 charger SRT Brembos bolt directly on my 2015 charger RT Road and Track? I'm getting everything from SRT spindles front and rear disks, pads, brake line and 4 brembo calipers etc.
I have 2016 Challenger Shaker. Just got srt8 brembo caliper set front and rear. Sandblasted and ready to be powder coated. The question is, Do I need to get srt8 spindles to fit the caliper i have? My wheels are 20"
I did the same thing you did in the video but it didnt work on my car because the tire ring rubs on the caliper, i bought the spindle and everything. I really need your help.
i have question i have charger rt 2019 i whanna install brembo 6 piston & i whanna know if i can used the same brake line of rt to brembo calipers & the bolt
I just finished doing that swap. Make sure the brake line is attached to the caliper when you buy it. The stock rt caliper brake line will not transfer over. but the mounting point on the wheel well is a direct fit.
Im late to the Party but Question? I have a 2015 Dodge Challenger Rt looking to upgrade my brakes, do i have to switch out my brake line in order to install the Brembos.
I just got my front spindles put on. Did you use the same bolts that mount the old calipers to mount the brembos, they seem to be the same. Also, there are no axle nuts up front right?
hello love the vid need to know on the rear spindles in stalled do u need to shange them for brembo calipers or can the go on the r/t spindles has any made a vid on that install please
Sorry to ask but the only video I see people still asking, I was told for better rim clearance in the front to replace my front spindles on my RT 2017 for srt as they " have more clearance " but I'm wondering if I don't want to do the Brembo upgrade just yet can I use the regular brakes on the srt spindle.
I honestly don't know, I would think no because the SRT mounting points are set up to run a larger rotor so I would assume there would be an issue. I say just wait until you have the brembos and everything you need for the front
Not yet still settling into the new house and work/the newborn. But once I get back into a routine I'll be on the hunt for the rear spindles and ill make a video
What year spindle can i use on a 14 srt8 charger as i bent my oem spindle nd need to replace it !! I hurd all 2006-2014 will fit? Let me jnw what u think
Does it matter what year of spindles/Brembo brakes you buy? For instance, I have a Challenger R/T Plus. I found a take off from a 2006 Chrysler 300 SRT. Any difference in years. Any difference in Chassis as for as Challenger vs Charger vs 300?
People when he said he had to gt it pressed out well all he had to do was put the nut back on till its level with the bolt then hit the nut with your hammer till it pops off then remove the nut and wala.😎
@@DropTopPerformance why not just replace the wheel hubs and rotors with the SRT8 for those brakes ? Do you really have to do all that in order to have SRT quality front brakes?
I know this video is old but I'm trying to do this on my 09 charger rt, I have brembo breaks and rotors from a 2017 challenger, what spindles do I need???
Quick question I just bought some 22in hellcat replicas they came off a 2019 charger but my charger is a 2012 sxt do I need to do the swap so the rim's can fit
Hey I have 2011 RT charger and picked up a 2015 scat pack 6 piston front and 4 piston rear, looking to add the kit to the car since we’re running 470 to the rear wheel and got the kit for a stupid deal. What spindles would I need to make this work, front and rear? Thank you in advance
Late to the party but I love the video! Great job with the install. Now that you've had it for a year do you think it would've been better going with the 6 piston Brembos?
Not late to the party at all! 😁 but yes I will be going with the 6 Pistons once I Cam and supercharge this build. Then once I get the 6 pistons I'm gonna give the 4 pistons away to a V6 or RT in need😁
If u wanna upgrade the brake sistem from diferent car is it possible let’s say can u go from hellcat brake and rotors and put them on a mustang or camaro ? Is that will be a problem or it won’t fit or any other issues?
Firstly thats a sicks profile picture you have. But thats a really good question, im not sure honestly. So are you trying to swap dodge specific brakes on a mustang?
Drop Top Performance nor really im just putting the example if it will be a problem to have brakes that came of from hole different car and put them on a different car changing brakes and rotors
Drop Top Performance let say i found out a set up of brakes and rotors that came off of a hellcat challenger and i wanna put them on a camaro 3.6L or 2.0 can i do that ir i can only do upgrades on brake sistem from the same type of cars so if i wanna do upgrade a camaro set up it has to be from a camaro set up or if is a mustang it has to be from mustang etc.
So I would believe that the mounting tabs would be in a different location and also the rotor size might be different. But im really not sure to be honest.
Did you do the rears yet? I have everything except for the drivers side rear knuckle. Cant seem to find one at a decent price. Ive been hearing that the rears are tough.
Finally, a simple, clean and to the point video. I appreciate you doing this. People have made this swap out to be like you need to collect all 7 Dragon Balls. You got a new sub… Damn, I just realized this is 3yrs old. I wonder how come I never found this before??? Better late then never…
If you wanted to go wit the 6 piston brembo those spindles are compatible. Rears stay the same.
Unfortunately the 6 pistons were out of my price range at the time. However I will be upgrading to them in the next year or so.
My Charger needs this mod pretty badly. Also seems like a good time to do suspension.
One of the best upgrades I've done!
Not that this isn't a cool mod to do, I do have one alternative if you guys are looking to make your car stop better. Look into the BR9 brake package. There is even a forum thread on the BR9 swap with part numbers and everything. I mention this because this particular mod is going to set you back quite a few bucks and the alternative is significantly cheaper. Don't have to change spindles, you get 14.5" fronts where brembos can be either 14.2" to 15" depending on what model it come off of. The trade off is this, you get 2 piston cast iron calipers. These are the same brakes that come on all 2014.5 and up Charger Pursuit cars so parts are dirt cheap all things considered.
Good vid though man. You didn't overcomplicate it. Just down and dirty. Liked your vid on the exhaust overrun too.
Thanks man, and there are definitely different ways to improve braking. But for $800 I couldn't pass it up! Still looking for rear spindles though 🙃
In Canada our bone yards have decent deals on different brembos but cost wise the br9 is the best bang for buck. You just don't get the red block calipers.
Thanks for this video and very informative. But I am wondering what is the reason for replacing the spindles.
Thanks! You have to change spindles because of the mounting location of the brembos
Will the 2006 srt spindles work? I’m hearing some conflicting answers saying the 2006 were different than the 2008+
Would you happen to remember if the Caliper mounting bolts were the same ones you used to put the brembos on?
I haven't turbocharged my SXT yet, but damn, for flare I think I'd definitely want to upgrade to this, I've noticed how meh the stock brake rotors have looked
Brembos are the way to go. Good stuff bro.
Oh man a huge difference!
Until its time to replace, its expensive as fuck. But if you ballin money aint shit. Im ball on a budget.
was it hard to bleed the brakes after ..?
It looks like you installed an entirely new brake line or did you just clean up the old one?
Quick question will 2007 charger SRT Brembos bolt directly on my 2015 charger RT Road and Track? I'm getting everything from SRT spindles front and rear disks, pads, brake line and 4 brembo calipers etc.
Yes, mine came off a 2010 srt8
I have 2016 Challenger Shaker. Just got srt8 brembo caliper set front and rear. Sandblasted and ready to be powder coated. The question is, Do I need to get srt8 spindles to fit the caliper i have?
My wheels are 20"
Thanks man!
That's was so hopeful, What about the six pistons brake is it the same process?
I did the same thing you did in the video but it didnt work on my car because the tire ring rubs on the caliper, i bought the spindle and everything. I really need your help.
What size wheels do you have, you should have 20s to fit the bigger brakes.
I have the same red leather seats in my 2014 r/t I love it here 🥰
Does an srt spindle work or does it have to be a specific srt serial number on it?
I noticed you took off the dust shield and didnt put it back on ? do you not need them ?
I haven't had any issues since i have done the swap
@@DropTopPerformance What about the brake lines? I thought out R/Ts wouldnt work with the SRTs?
same part fits chrysler 300 5.7 right?
i have question i have charger rt 2019 i whanna install brembo 6 piston & i whanna know if i can used the same brake line of rt to brembo calipers & the bolt
Yes you can
I just finished doing that swap. Make sure the brake line is attached to the caliper when you buy it. The stock rt caliper brake line will not transfer over. but the mounting point on the wheel well is a direct fit.
I got a question man why did you need to change the spindle for ?
Can I just use the calibers or do I have to use everything you put on?
Can’t you buy an adapter instead of replacing the whole steering knuckle ?
Why was the brake line a pain what should I look out for
Does this apply to the Durango as well?
Im late to the Party but Question? I have a 2015 Dodge Challenger Rt looking to upgrade my brakes, do i have to switch out my brake line in order to install the Brembos.
Question do have to change the spindles? 2 will srt8 brake work fit on on a durango?
what size rim are you using..?..i have 17 inch rims will these work..?.
I run a 20" i honestly don't think a 17" would clear the Brembos
@@DropTopPerformance ok thank you
I just got my front spindles put on. Did you use the same bolts that mount the old calipers to mount the brembos, they seem to be the same. Also, there are no axle nuts up front right?
Yup I just used the same 2 bolts and she was good to go!😁
Did you use same bolts to hold the caliper with spindle??
Where can I buy brembo calipers?
I have a question, do I have to replace the spindels in the 2011+ Durango?
Will this work for charger pursuit
can you list the spindles and parts you bought? I want to upgrade my v6 2018charger without buying spacers etc.
Kevin Kherkher I got an app called carparts.com that’s basically all the junkyards in the US. That’s how I found my spindles and knuckles
What year spindles wouldn't be compatible for those brembos. Cause I have 16 scat pack brembos
As long as you have spindles from an SRT car you will be good to go
What kind pf calipers are those, are they brembos? If so where did you get them?
Yes they are brembos off of a 2010 300 SRT
Does it matter from what Srt its from, for example would a jeep cherokee srt8 spindle work?
@@josesalas6015 I honestly don't know about jeeps
hello love the vid need to know on the rear spindles in stalled do u need to shange them for brembo calipers or can the go on the r/t spindles has any made a vid on that install please
still don't get that answer?
Is it possible to upgrade my dodge charger sxt's factory brake calipers into 4 piston or 6 piston brake calipers ?
Sorry to ask but the only video I see people still asking, I was told for better rim clearance in the front to replace my front spindles on my RT 2017 for srt as they " have more clearance " but I'm wondering if I don't want to do the Brembo upgrade just yet can I use the regular brakes on the srt spindle.
I honestly don't know, I would think no because the SRT mounting points are set up to run a larger rotor so I would assume there would be an issue. I say just wait until you have the brembos and everything you need for the front
Do you have to change the spindle
You sure do
Did you do the rears?
Not yet still settling into the new house and work/the newborn. But once I get back into a routine I'll be on the hunt for the rear spindles and ill make a video
Any updates on the rear?
did you have to change out brake lines?
I did not, but I'll probably upgrade to braided lines soon
What year spindle can i use on a 14 srt8 charger as i bent my oem spindle nd need to replace it !! I hurd all 2006-2014 will fit? Let me jnw what u think
You should put the prices
I'm looking to do something like this for 07 Chrysler Aspen 5.7
I need Brembos in my life, Im always on Cleveland pick-a-part's site looking for the right price lol!
Its an awesome upgrade for sure!
check lxforums from time to time
i have the same ones and the rotors how much u offer?
Why is changing the spindles necessary ?
The mounting points are different with the Brembos
Does it matter what year of spindles/Brembo brakes you buy? For instance, I have a Challenger R/T Plus. I found a take off from a 2006 Chrysler 300 SRT. Any difference in years. Any difference in Chassis as for as Challenger vs Charger vs 300?
So I dont think so, then ones on my car are from a 2009 challenger SRT8 and I had no issues.
Would the brembos off a 09 srt8 work on my 2017 charger rt?
Got a 2019 Challenger RT. So if I get all the parts off a 07 and up SRT Charger/Challenger will it fit?
Will I need to change my stock wheels which are 20x8?
Yes it will work, the wheels need to be 20" to clear the Brembos so you'll be fine!
Drop Top Performance could I use stock spindles ? I have 2019 challenger sxt 20” wheels
@@isaacbyrd8504 you need SRT spindles
Drop Top Performance why do we need srt spindles
Question I’m buying the pieces for my 2019 Durango R/T do I really need all 4spindles to make the transfer to the srt8 brakes and caliper set
Where can I find this kit
What if I just want to v8 breaks non BB
People when he said he had to gt it pressed out well all he had to do was put the nut back on till its level with the bolt then hit the nut with your hammer till it pops off then remove the nut and wala.😎
Can the SRT Brembo clear police rims
I am not sure, I have 20" hellcat reps
I want to do this mod so bad but can't seem to find spindles for a reasonable price anywhere. Good deal bro 👍
Yeah man that's why I haven't done the rears yet. But just be patient and you'll find a set!
@@DropTopPerformance why not just replace the wheel hubs and rotors with the SRT8 for those brakes ? Do you really have to do all that in order to have SRT quality front brakes?
@@jlrockafella unfortunately yes you have to replace the spindles. The mounting point is different for the brembos
You wont until people stop buying them up. Supply demand sucks.
thanks for the walkthrough, have a like. Also, single best thing to do on your new srt brakes, good set of pads. Try carbotechs, etc.
What idk about is how come it couldn't be done on the original knuckle..can anybody explain this to me pls?
Because of the location of the mounting points are different.
What year could I use on my 14????
My car is a 2012 and I used parts off a 2010 300 srt 8
I know this video is old but I'm trying to do this on my 09 charger rt, I have brembo breaks and rotors from a 2017 challenger, what spindles do I need???
Plus that is a little thin spindle and will snap watch
Been on there for over a year and have had multiple track days not to mention the thousands of mile on the Autobahn seems to be just fine🤷♂️
Someone sounds like a hater. If it came off a srt then it's designed to handle the power. Probably thinner to help cut down on weight 🙄
I have a 2018 Daytona Charger, can I keep the stock spindles or do I need to change them?
You will have to get SRT spindles
So is it even possible To but 08 brembos and spindles on a 2013 sxt challenger
Yes, mine are off a 2010
I know now to look for SRT8 spindles to transform my R/T breaking system
Do you have the hellcat hood on your car
Unfortunately not, I have modified my original hood Using hellcat vents tho. I have a video about it
Quick question I just bought some 22in hellcat replicas they came off a 2019 charger but my charger is a 2012 sxt do I need to do the swap so the rim's can fit
No sir, your new wheels should fit just fine, same bolt pattern
They rubbing up against the knuckles
@@ryanreddix2460 what part of the knuckle?
The top edge of the rim it self
Really hardworking ,,, consumes lots of time n energy , but worth doing it , good video
It is defiantly worth it! i hope it helped!
I really want to do this to my 05 Magnum R/T!
You should, honestly the best mod I have done to the car
Do you have the knuckle part numbers
Unfortunately I do not sorry
Thank you the video well help
So u put a weaker spindle on
Dont really see how its weaker, maybe you know something I dont 🤷♂️
Cool, what size rims? Looks perfect bro
20" hellcat reps, no issues with clearance
Hey I have 2011 RT charger and picked up a 2015 scat pack 6 piston front and 4 piston rear, looking to add the kit to the car since we’re running 470 to the rear wheel and got the kit for a stupid deal. What spindles would I need to make this work, front and rear?
Thank you in advance
Thats awesome man! But any SRT spindle will work
So even a 2015 hellcat spindle? And I also have a pick on a 2008 spindle would either one work. Sorry and thank you again for your input
@@RazereDgeX yup as long as its a spindle that has the correct mounting point for the Brembos
Do I need to get new spindles and will the new breaks fit over the stock R/T wheels?
How come you have to get new spindles ?
Because of the mounting point of the Brembos are different than the non Brembo spindles
Are you gonna do the rear?
Yes i will just waiting to find a good deal on rear spindles, but not in a rush they aren't as important as the fronts lol
Do you NEED to change the spindles ? Great vid tho!
Unfortunately yes because of the mounting points of the Brembos.
But would I need the whole arm too or just be knuckle
@@DropTopPerformance Is it necessary to change the rear spindles also?
I’m about upgrade my R/T Brakes also, great video
Hope it helped!
BLC HEMI same here 💯🔥
i have that set i can sell to you
Mena Fode I’ll buy them?
@@secretlifeofgia1 let me know whats the best way
Will this work on a 2016 300?
Yes it will work!
Late to the party but I love the video! Great job with the install.
Now that you've had it for a year do you think it would've been better going with the 6 piston Brembos?
Not late to the party at all! 😁 but yes I will be going with the 6 Pistons once I Cam and supercharge this build. Then once I get the 6 pistons I'm gonna give the 4 pistons away to a V6 or RT in need😁
@MOPARGuy hahaha I'll have to be fair and give everyone a shot😁
Drop Top Performance yes to me thanks very much definitely in need of those.
If u wanna upgrade the brake sistem from diferent car is it possible let’s say can u go from hellcat brake and rotors and put them on a mustang or camaro ? Is that will be a problem or it won’t fit or any other issues?
Firstly thats a sicks profile picture you have. But thats a really good question, im not sure honestly. So are you trying to swap dodge specific brakes on a mustang?
Drop Top Performance nor really im just putting the example if it will be a problem to have brakes that came of from hole different car and put them on a different car changing brakes and rotors
Drop Top Performance let say i found out a set up of brakes and rotors that came off of a hellcat challenger and i wanna put them on a camaro 3.6L or 2.0 can i do that ir i can only do upgrades on brake sistem from the same type of cars so if i wanna do upgrade a camaro set up it has to be from a camaro set up or if is a mustang it has to be from mustang etc.
So I would believe that the mounting tabs would be in a different location and also the rotor size might be different. But im really not sure to be honest.
Where did you find those spindles for your car? I have a Durango gt and I’m trying to upgrade it to brembo brakes and calipers.
I got mine off a 2010 SRT8 300
Drop Top Performance thanks man. I’ve been looking everywhere. I can’t find nothing 😂
@@Sambam1981 yeah I still haven't found rears yet
I have a Durango R/T do I need spindles from a srt Durango For the upgrade?
I honestly don't know, i wanna say id think you would have to but I don't know for sure. if you find anything out let me know!
Spoke to dodge they said no I wouldn’t need the spindles changed out. FYI
@@nickrichmond1978 that's good news man that's less money out your pocket 💪🏼
Awesome 😎 definitely have to do this. Good demonstration as well. Definitely subscribing to your channel.
Are those srt8 spindles you need or just some type of performance spindles I have a 2012 charger rt
So they need to be SRT spindles, the brake caliper location is different from the RT
Drop Top Performance what’s up, thank you so much for the reply love your videos plz make more, it don’t have to be about car. Mad luv from illa-del
Good work nice job
Did you do the rears yet? I have everything except for the drivers side rear knuckle. Cant seem to find one at a decent price. Ive been hearing that the rears are tough.
They are man and even more so to get them here in Germany. So no unfortunately I have not done them yet:/
Link to purchase the kit please?
This is a mix of parts that i bought, there really is no kit
Looks well worth the time and effort. Nice job. Looks great!!!
It stops on a dime now!!!
DropTopProductions Awesome 👍👍
I’ve just did the conversion this weekend. I’ve bleed my brakes twice but my brake pedal still goes all the way down.... did you have that prolbem?
What are the spindles off of? Will this work on an AWD?
Ummm honestly I have no idea if it will work for the AWD. But they came off an 2010 SRT8
Why would you change the spindles LoL ?
I'm pretty sure you have to change spindles in order for the brembos to fit
Needed to bleed brakes, no?
Yes you do.
I have a 2019 RT what parts do I need if I wanted to upgrade to Brembos and does it have to be a specific piston or any will work ? Thanks
And also will I need new roters ? And could I
Use stock spindles ?
I have a 2015 RT and from what I've read we only need ther calipers and rotors from a 2017 jeep srt to do the swap..
Nice video. I have a 2013 300 base. Can I use the spindles from a 2007 300 srt ?
Yes, these were from a 2010 srt8
Hi, I have the brembo brakes for my challenger rt, did you try without the rotor arms?
I'm not sure what you mean by rotor arms, do you mean spindles? If so, no you have to change those also
@@DropTopPerformance thx, i will have yo buy that piece too :(
@@KarlitosCH you'll find a good deal man dont worry to much! It'll be worth it trust me!
Great job and thanks for the tutorial my man.
No problem 👍
ball park what’s the price for everything? nice work by the way
you could probably do it for under 1k i was looking for months and did mine for about 800
Can I install 07 charger srt brembo full conversion into my 2012 charger rt ?
That's what I need to know!
Yess, so these came off a 2010
That new spindle looks extremely thin and weak
Link?
Everything is bolt on .