Tapout Tuning 2023 CT5-V Blackwing Cam and E85 Upgrade Package!
ฝัง
- เผยแพร่เมื่อ 29 ม.ค. 2024
- This CT5-V Blackwing had all the most common mods including larger throttle body, ported stock supercharger, and Kooks header system. However, this time around we installed our camshaft package, an auxiliary fuel pump, and a DSX flex fuel kit.
Thanks to these added modifications, the final calibration is a fully automatic flex fuel tune that will work fine on any fuel from 93-octane E0 to E85. It starts adding WOT ignition timing when ethanol content reaches E20, and hits full power by E60. So E60 to E85 will make the same power. Here are the results:
- 665 whp with ported supercharger and throttle body, but no tune
- 742 whp with 2.50” pulley on 93-octane pump gas (12 psi boost)
- 758 whp with 2.30” pulley on 93-octane pump gas (14 psi boost)
- 771 whp with 2.18” pulley on 93-octane pump gas (15 psi boost)
- 809 whp with 2.18” pulley on E62 fuel (15 psi boost)
All the above numbers are using SAE correction, so you can add ~ 2% if you want to see STD numbers.
If you're interested in getting your CT5-V Blackwing Tapout Tuned, you can check out all the details here: www.tapouttuning.com/product/... - ยานยนต์และพาหนะ
Daaaaaamn that looks like the car sitting in my garage - oh wait!!! 💪🏼💪🏼💪🏼
😤
Lovely V
We had fun driving it back home even in the cold!! You guys are the best!
We're glad you love it, it was great to work with you both!
Where in PA are you located ? I have a V3 and would love to see your CT5V Blackwing. I'm down in York.
Love it! Sounds amazing!
Damn this beast sounds good!
Sounds so good...
Sounds great
That is badass!
Ya I’m bringing mine to you ❗️
Thank you for the info in the description most people don’t read it but I do
We appreciate that!
I wish man I wish I could have this or even the 4
Man I wish y’all weren’t so far from south Florida!
Ship it up here. We get most our cars shipped to us for installs from all over the US. 💪
That chop is sexy
❤❤❤❤❤❤❤❤❤❤
Badass but undriveable in that weather. It would be really interesting what you guys can do with the CT5-V AWD 3.0 TT....
We offer a JB4 tuner as well as tuning via HP Tuners. These cars respond very well! www.tapouttuning.com/product/remote-tune-for-e99-global-b-vehicles/
Just buy an m3 comp drive if you want a DAILY 8 second car.
@wethomas3 Nah I compassionately can't stand BMW's. Everything with me isn't about speed, comfort, reliability and solidarity is. I don't like doing, wearing, using or driving what every else does. 😎
@@SnoopyRu1980 neither do I. You see more blackwings around here than G80 M3’s that’s for sure. I do like that v8 sound and the manual in those BW’s, but let’s face it only one car is made in Detroit and drops granny panties
Ima be bringing mine up in march. Heads are out at Frankenstein and cam package is being delivered soon. Got the exhaust so thanks for quick delivery.
For unlock, should I send you the ECU before I trailer the car up there? Might did that fueling kit when I’m there!
Sounds great! You can send in your ECM before bringing the car here if you'd like, and that will save some time as we won't have to wait to get the ECM back. You can complete that order here: www.tapouttuning.com/product/remote-tune-for-e99-global-b-vehicles/
Sick!!!🔥🔥🔥
Any upgrades for non Blackwing CT5 V's ??🤔
Just tuning so far
We have the JB4 and HP Tuners tuning available for these cars currently. We also offer Green filters for a quick upgrade! www.tapouttuning.com/product/green-high-performance-air-filters/
Might be a dumb question but can you cam an auto also or just manual. Mine is the 10spd auto
You can install a cam on the automatic or the manual. This car has the A10 automatic.
Is the stock Eaton tapped out at 15psi? Do they do lowers on these cars? Asking because I’m coming from hellcat territory and just picked up my Blackwing.
Yes, 15 psi is the max, at least based on the current combination. The pulley snout has been machined in this application to accept that small of a pulley as well.
We used an overdrive crank pulley on this car as well.
What would be needed to get to 900+ whp would a lowside fuel system and Maggie 2650 get there?
A 2650 blower would definitely help you get closer. Methanol injection would also add a good deal of fuel system capacity. This car is running the DSX Auxiliary Fuel Pump Kit for the low pressure side of the fuel system.
Do the motors have to be pulled for the cam package?
They can be done with or without pulling the motor. However, if you don't pull the motor, you have to completely disassemble the front end in order to have enough clearance.
Have yall tuned a regular CT5v at all?
Yes, we've tuned several of these and they respond very well to tuning!
Lmaoo the weather does not look ideal for a car with that type of hp lmao
Definitely not! haha
Wish you would give the price for these packages on your website.
We are working on this now! We should have pricing up in the next few days. If you're interested in seeing detailed pricing, please email us at Sales@TapoutTuning.com and we would be happy to get you all of the information you need.
@@tapouttuning8902 That's awesome. I am buying a CT4 Blackwing, I will definitely be sending it your way.
how loud are the headers when you're cruising on the highway?
With the valves closed you almost can't tell you have them.
what about cold starts?@@tapouttuning8902
Depends on whether you have the car set to start in my mode with the engine sound cranked or you have it set to start in touring. Touring cold start isn’t that loud. Not much different than stock…
What cam and what size did yall use 🔥🔥🔥
I cover that in the beginning of my cold start vid CT5-V Blackwing GPI cam cold start
th-cam.com/video/bchwf0zypww/w-d-xo.html
This is running the LTPD3 cam
Is the 2.18” pulley flexfuel compatible
Yes, it is compatible with flex fuel. That is the pulley size the car is running where it makes 809 whp on E62 fuel.
Yes it can be used on this flex setup on either 93 or e85. Boost will remain the same but timing and fueling will adjust automatically with the flex fuel tune depending on what fuel you put in.
lol seems like a lot of work for that much power. Cams? Ported blower? Geez! BMW s58 3.0 liter inline six can make that power without all those mods. Already did 8.91 at 149 with a STOCK engine, STOCK turbos, and full weight (4,100 lbs with driver). Extra fueling, tune, nitto 555’s that’s it. G80 M3 FTW.
We get it you drive an m3 and the Blackwings have you feeling some type of way. If you think an m3 is better I’ll be the last to argue that with you - everyone leans towards a certain platform.
@@jtoagdaye indeed, to each their own.
But your M3 sounds like a Kazoo compared to a cammed V8. It’s not always about speed.
@@CarGuysRule82 my m3 you’re right twin turbocharged cars typically don’t sound great…but that knuckledragging v8 sounds weak compared to my 8,600 rpm naturally aspirated V10 (M6)… it’s not always about speed (although my tuned m6 will go well over 200 mph) 🤣
Care to post that source? I have not seen a stock turbo one run in the 8's or mph that high