Thanks for sharing. I've changed mine today. A M8 bolt fits the cam hole nicely and M5 fits fuel pump and crank for locking purposes. Like you I also marked with Tippex just in case. Was a bit worried about your method for undoing crank bolt, but it worked and I still have all my fingers/limbs. Citroen service manual says belt should be changed every 100,000 miles. Random info online says 150,000.
Guddu Pappu i hve seen lot of videos in my life like this. but this is amazing and camera fitting and setting is top class. no comments. U looking producer of a film. keep it up and do more videos like this.
I have covered 110,000 km from the factory and I’m already thinking about replacing the belt, what should be the mileage before replacing the belt..??🤔
Cristian Klein well, I don’t know what to say, apart from that it wasn’t difficult, and it’s 50 k since it did the job. If you have the tools just do it.
Alrighty. I just lost my "timing belt" virginity. The job was pretty complex and scary. I thought I could avoid having the engine "hanging in the air". Aaaaa! 😁 Anyway, I did it, the engine works and I feel more empowered than ever. The video was invaluable. If you or the video poster ever come to south of Sweden, please allow me to invite you to a drink.
according to peugeot manual 100,000 miles or 10 years what ever comes first. I changed mine after 110,000 miles. Once you replace the Original one then you need to replace every 60,000 miles
Hello, can you say to me, which gear of the transmission must be in during the Change of the Timing belt? Automatic? Neutral or D? Manual? neutral or 1-5? Thank you.
Hi the mechanic replaced my car timing now the car has vibration I went back to the mechanic he is saying it is not from engine but I am 100 percent sure it is from engine I don't know what should I do need help
Hi, I can guess may be during the work machanic accidentally scratched the crankshaft sprocket (magnetic strip on the sprocket) that can cause the vibration
A very in depth video fulfilling every request I asked for I am 80years old and I enjoyed every minute but I am to old to tackle this job many thanks.
Thanks for sharing. I've changed mine today. A M8 bolt fits the cam hole nicely and M5 fits fuel pump and crank for locking purposes. Like you I also marked with Tippex just in case. Was a bit worried about your method for undoing crank bolt, but it worked and I still have all my fingers/limbs. Citroen service manual says belt should be changed every 100,000 miles. Random info online says 150,000.
Very interestig way to open the crankshaft pulley!
das beste ausführlicher video was ich jemals gesehen habe bis jetzt mach weiter so
Guddu Pappu i hve seen lot of videos in my life like this. but this is amazing and camera fitting and setting is top class. no comments. U looking producer of a film.
keep it up and do more videos like this.
Thanks for your kind words
@@guddupappu3582 how many kilometers have the old belt ?
Is oem belt from factory ?
missionnad1 the old belt was factory fitted and done 167300.965 kilometers
@@guddupappu3582 167.300 kilometers?
I have covered 110,000 km from the factory and I’m already thinking about replacing the belt, what should be the mileage before replacing the belt..??🤔
Did it on the exact same engine last summer. It is not difficult but it took me some time to gather the courage to do it.
Can you please send me some of the gathered courage?
Cristian Klein well, I don’t know what to say, apart from that it wasn’t difficult, and it’s 50 k since it did the job. If you have the tools just do it.
Alrighty. I just lost my "timing belt" virginity. The job was pretty complex and scary. I thought I could avoid having the engine "hanging in the air". Aaaaa! 😁
Anyway, I did it, the engine works and I feel more empowered than ever. The video was invaluable.
If you or the video poster ever come to south of Sweden, please allow me to invite you to a drink.
Nice special effects at the finish
This was an excellent video. The uncovered drill bit adds a touch of drama. heh
Pump locking pin should also be inserted
it's the cleanest 1.6 i have seen ever :)
Fantastic video! Guddu Pappu we thank you very much indeed.
Fantastic, you made this process very clear
Did the car stop after ? Seartenly ity was the Crank sensor ?
thanks is not enough for the clear effort for public help
But again thank you so much for your help and advice effort and more for us
Guddu Pappu, What interval should the timing belt be replaced for the DV6 engine like yours and also mine? Thank you!
according to peugeot manual 100,000 miles or 10 years what ever comes first. I changed mine after 110,000 miles. Once you replace the Original one then you need to replace every 60,000 miles
Hi, very clear and helpful video.
Does it matter how the fuel pump is locked? has two holes at 180 degrees.
Which of the two?
Thank you
I can't see the cam mark of my peogeot 307 2ol
На каком пробеге меняли ремень?
Salut esque la pompe hp a un sens ou pas . merci
Excellent video!! Do you remember the pin diameters to block it in time?
Use a 7.5mm drill bit from memory
Good video what keys do they need?
Awesome bro. Thank you for your hands.
Triger kayışı seti (coming Belt) kaç kilometrede değişti video için teşekkürler
Hi, I changed on about 110,000 miles
Hello, can you say to me, which gear of the transmission must be in during the Change of the Timing belt?
Automatic? Neutral or D?
Manual? neutral or 1-5?
Thank you.
Neutral
@@guddupappu3582 Thank you Man! 👍 You are great. Both of the gear?
V good work
which camera and model plese
Samsung s8
Nice work bro 👍
Thanks
Thanks very good video
Didn't you lock up the injection pump?
a lot seem to miss this. which is why its important to use multiple sources including oem manual
@@danielsmith7105 since the pump dosnt need to be timed I wouldn't think it would be a huge issue
The hp pump have a repair or no . thanks
Alim Alim no
@@guddupappu3582 thankyou very much pappu
Very good thanks
Hi the mechanic replaced my car timing now the car has vibration I went back to the mechanic he is saying it is not from engine but I am 100 percent sure it is from engine I don't know what should I do need help
Hi, I can guess may be during the work machanic accidentally scratched the crankshaft sprocket (magnetic strip on the sprocket) that can cause the vibration
Never have I seen the crankshaft bolt opened like this... Clever idea but extremely dangerous
Nice video mate
?porque.me pierde hacerte.por tapa.junta arriba.un peuyot.205.6 puerta.motor.1.2
Brilliant
А чого вода залита ?
Thx
pedazo de video 👍🏽👍🏽👍🏽 si tenes un *308* like en Instagram *308_official* ahi aportamos nuestros 308¡¡¡!!! les envio abrazo Saludos
Gracias
😃
Gudduh is Fudduh
buen video ❤️👍🏽👍🏽 si queres un *308* segui en Instagram *308_official* ahi mostramos nuestros autitos!!! les mando beso Saludos
15 minutos y te cobran 4 horas de mano de obra jajaja
es mudo el mecanino
Are you able to speak?
🤐
일을 많이 힘들게 하시는거 같으네요
pedazo de video 👍🏽👍🏽👍🏽 si queres un *308* sumate a Instagram *308_official* ahi aportamos nuestros niños... les mando cariño Saludos