Pioneer AV Receiver Full Setup Tutorial(dolby,hdmi,panorama,drc)/How To Setup AV Receiver Manually
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2024
- Teen Patti Master Download Link:- nn4.pw/aw/xvfbk7
Others Channel Link:- ------------
Study Channel:- / @thegatelearner-original
Gaming Channel:- / @thegamelover5405
Pioneer AV Receiver Full Setup Tutorial(dolby,hdmi,panorama,drc)/How To Setup AV Receiver Manually
#technoboy
#soundtest
#avreceiver
#pioneer
#yamaha - บันเทิง
I picked up The Pioneer a 24 receiver from a thrift store didn't think it would be that much but I am now have a change of mine thank you very much for this video!!!
Thanks for your setup video. I was finally able to turn off demo mode 👍👍 and set up my receiver in stereo mode with just two speakers in my man shed. Cheers!
Most welcome 🙏
Thx for the video, I've got the reciver a couple of years, now I know how to use it 😅
Thanks so much , your video is really easy to understand.
Thank you so much. I didn’t know I could do so much with this receiver. Thanks.
Thank you so much for this video.
I think the menu of the vsx-s510 is almost the same? This wil help me to set up that device. Thanx, great tutorial.
Hope so. Thanks a lot 🙏
Very useful and thank you mate 👍👍👍
Could you please explain me how to use the analog microphone in this receiver? Thank you 👍
How's it ,my av receiver has been playing perfectly but now it not giving sound at all what might be a problem ?
Great. Thanks
Thank you so much was very useful /hug .
Sir very useful thanks
Thanx! Very professional video. I have a Pioneer VSX923 - but when I pushed Home Meny I did not get any SP.Set. Is it another word on my model?
I guess not. Go deep. You will find Manual sp setup or something like that. Better use tv display
Thank you so much this is awesome
I have a question about how to make 5.1 Dolby Surround I only get 2 channels no actual 5.1 hence it is like stereo. Any suggestion to make it 5.1
All is shared in the video. Select properly
@@technoboy-allinOne yes i was able to do it thank you
hey mate, nice video, i been using this receiver over 4 years, n was working fine, just wanted to fine tune to get most and i came across your video, i changed all settings as per your video, but now i could only hear very hard bass sounds from my woofer, the softer and low bass sound has gone, its not as soothing sound as it used to be. I have 3 knobs on my woofer, volume, Xover and Phase, would you know what best to set on those 3 knobs? as Xover set in receiver is 80, what shud b the knob on sub woofer itself? or should i try any other settings in receiver? your response will be appreciated, thanks, fyi, I have Large Front, small centre, small surrounds and active sub
You need to adjust the xover knob. Either to the max or if it has pass through.
@@technoboy-allinOne its at max, with xover set to 80 in receiver
Great sir
Hi, boss I have a problem with my vsx 519v all the speakers specially the bass make a buzzing sound and i connected with a phone and when i play the music all the speakers doesn't play simultaneously only play separately plz i need your help 💖🙏💐how to play all the speakers simultaneously waiting for your reply
Thank you💐
Reset the receiver & set it up like this & check it out
I am having trouble setting up system just for AM/FM can you give some suggestions?
never used am/fm on this thing. Used it just for theatrical movie experience. you can check the manual if you have or you can search online with the model .
Thanks for the detailed explanation. Pl explain how to enable Dts HD on VSX 524. My receiver is connected to MI TV HDMI ARC port and receiver operated source is TV and it is working perfect. The following TH-cam (5.1 test, clips and Trailers) channel videos are not supported by receiver. Any solution for this?
I did not feel the audio experience with this receiver.
Use the standerd surround button on remote & select dolby pl2 music. Turn panorama on. For better understanding check out my video on how to get the best out of a receiver..
thanks for the video. Can you do a video on setting up the wireless connection manually. My phone app doesn't find my vsx45 unit.
This set has some fault. I am waiting for it to be repaired. Once i get it, i will sure make video of wireless connection. Thanks man.
thanks. Let me know when you post the new video@@technoboy-allinOne
Hi, can this receiver setup for 7.2.2 speakers, like dolby atmos setup? Thanks
It's a 5.1 receiver
Hey boss what do you know about the 4k pass-through I have the vsx-523-k and hook my firestick 4k up to the bd input and it never plays 4k video what am I doing wrong do you know?
Check if your HDMI cable support 4k
Thanks
Hello, I have a vsx 422 receiver and i switched tvs, everything working as usual but when I used to have the other tv, once I turned on the tv it automatically turned on the receiver but now I have to manually turn on the receiver with each controller, is there a solution to turn on the receiver automatically once i turn the tv on ?
Yes. The tv must have hdmi ARC port. And you gotta set this function from the tv.
Sir can you make a video for spk set up pioneer vsx -534 for all output spk@the back of amp panel..thanks
Sure i will try
I bought an even older Pioneer SC-LX 57 (from 2013), and can't get the signal from the AVR to my TV, which is not a smart tv. I put the high speed HDMI cable from Output 1 to any of the HDMI inputs on the TV, but can't get a connection. I wonder what I have to do to get a signal? Settings in the AVR? Which do I change?
I reset the avr to factory settings, and now I get a signal to the tv, but when I connect my bluray player it only plays in stereo. How to change to surround?
Setup the receiver all the way again. And set it to Dolby pl2 music
@@technoboy-allinOne Thanks, tried that and it worked.
I just bought a Pioneer SC-1522-K AV Receiver off of eBay and it was working for a few hours other than I couldn’t figure out how to correctly set it up. I factory reset it and within a few hours it started blinking and saying UE22 and I don’t know what’s going on. I know absolutely nothing about home stereo equipment but I am addicted to buying speakers and other equipment now but I’m asking if you know anything about this error code flashing and if I can get it to work again I realized today how dumb I am because I couldn’t figure out how to set it up like you did on here
Its firmware upgrade problem. Follow the instruction on the manual & update the firmware. It will work
My audio auto switches basic on the media that’s playing. I set it to Dolby pl2 music but when a movie starts playing it switches to Dolby digital. Is this suppose to happen?
You have advance receiver which detect the source i think. Though its not suppose to happen. You try resetting it
@@technoboy-allinOne I reset it then followed your steps exactly. So I’m not sure why it’s auto-switching based on media. Really frustrating
You skipped over mono sound setting. Both channels should be on. You did have it set correctly.
Hi, I have same or similar Receiver. I followed the same steps you mentioned but not successful. I am trying to connect my Sony Bravia 55x80J model HDMI ARC Port to DVD / Game of the receiver and when I made HDMI->ARC - ON - then it is stopping audio from TV but it is not working in the Receiver. I thought cable problem, but even with the Digital / Fibre Optic Cable also, I am not able to make it work. It is same for all. Is anything I am missing. Please guide me.
Check the hdmi setting on the receiver. Dont select hdmi arc on the receiver. Thats different part. In the hdmi setting set audio to the amplifier option.
When i got mine my sub didn't come with a way to connect it . Any suggestions on that it was just two wire like for a regular speaker.
Your receiver model and sub model???
You probably need a powered sub.
Hi, I have a problem. When I am watching something the audio stops for second and then come back. What can i do with it? Thanks
Reset the receiver & set it up again, see if the problem is solved
Bro i have small problem in my pioneer vsx-325
My volume is limited to 65 it doesn't go up and before it goes up to 80 (max).. whats the setting to change it??
Set the max vol limit or reset the receiver
@@technoboy-allinOne I've resetted and it's fine now thank u
Hi there, I've just been through all the steps to get my pioneer to work with my tv, and I have no sound!! Any help would be appreciated, many thanks 🙏 Niel
What is the source of audio. If it's the tv then the setup would be different
Did you turn on your hdmi arc?
how and what should be the setting if i wan't all the speakers working, bcoz upon testing 5.1, the sound of the sorround speakers only comes out on the front speakers, but all speakers are working if i test it individually, pls help
Well the problem is not clear. Check this video & setup your receiver properly & set the volume level of each speaker according to the distance.
@@technoboy-allinOne how to get 5.1 Dolby surround because I still get 2 channel stereo
What about the use of the phones on the front.. Can you explain please
Mine is got a fault. And never used phones before. So i have to conmect & check it myself first. So untill i fix my receiver cant help you. Anyone know knows about this plz help this guy here.
Headphone output. Not 'phono' which is in the back for turntable input.
Hello, my rear back/surround speakers stopped working. When I run the "test tone", they work fine but somehow I have disconnected them internally. They don't work on "cinema" or the "music" setting. (I have two front speakers, one subwoofer, one center, two back speakers and two rear. Everything works fine until recently. Please help!
(VSX 1022)
Try reseting the receiver
Pioneer vsx-329 have this function
How do I change the A to an H on the receiver
When I push the button to select Dolby pro logic music that option isn’t there. It only says stereo.
Then you dont have all the speaker selected as 5.1
can this be done without the remote control? I lost mine
Yes i guess.
How to connect asbt200
There would be a proprietary connector at the back of the receiver. Its white colour wide port at the left side of the back panel
7:20
Pioneer avr vsx-323
Audio test but sentrarcenter and surround speakers not working what's the reason, have any solution?
You may have set it to stereo mode. Change it to dolby pl2 movie or music.
But I do the audio test and it didn't work either, have any technical problem?
I have reset it,
2:44 hi bro, answer pls
My radio and blu-ray dvd plays all the speakers but when I try to listen to regular tv on surround sound, I get no sound.
How its connected
I'm using the arc slot with my hdmi cable.
I fixed it by watching a sony tv setup video. My sony tv wasn't in sync. It works fine now. Thanks.
I am not getting reset option on pressing that button
This trick works on few vsx models. If you have any older or advance model then this wouldnt work
Hi
WHARE TO PUT ARC CABLE
Hdmi
@@technoboy-allinOne okay sir input or output
i am using pioneer vsx 524k this model, oneplus 32in android tv sir
how to set arc
If you want your smart tv sound to the receiver then connect hdmi from tv arc port to receivers hdmi input port. For receiver turn on arc & for tv go to the sound setting & select hdmi arc as audio out .
@@technoboy-allinOne okay thank you, will try
How to connect usb
Simple plug n play, usb drive must contain songs only, no folder
@@technoboy-allinOne one more help where to get spare remote
@@kumarhemachandran9751 search online or ask service centre
Make sure it says pioneer on the remote and dont bu from Lucky. Fake.
Thanks
Welcome
Hi
Hi
Hi
Hi