Cody, I'm glad you made this video. I feel like there's been this debate about wooden vs milk crate racks for years. Number one thing people need to do is not underestimate the power even consumer canister shells have. They can blow a rack apart.
I had a Cato with a Hk Harry salute ball shell on a 40 shot wooden rack . I Rachet strapped the center of the entire rack and when it catoed no wood or tubes flew . The strap held it all together . It was crazy how well the strap helped. At every club shoot I now use a ratchet strap around my racks
So you strapped it in the center between the top and bottom 1X4's where you can see the tubes exposed cause there is no 1X4 there correct? I'm doing this for sure. It still seems like th 1x4's would blow out. Were you using HDPE or fiberglass tubes?
@@bigmacfullerton7870 the middle where there is no 1x4 but I wouldn’t tighten it too much because that can cause the tubes to warp . Just enough to stop the tubes from flying out . Btw I attended a PGI fireworks training class yesterday and asked about using ratchet straps and they said it’s probably not the best idea because those straps are not made of cotton and can catch on fire. While I agree, it still saved the tubes from flying out and causing chaos
Safety vids are really important….keep up the good work. I saw one guy wrap tie down strips(the ones with rackets, that are used for strapping down loads on vehicles) and weaved it around the outside of the milk crates.
I used to shoot professionally for about 10yrs. Maybe 8 shows a year. Every so often people would double load a tube. I usually shot 3 and 4in. Anyway some asshat double loaded peanut shells. So 4 shells in a 4in rack. I was standing 5ft away when it went off. Never ran so fast in my life! Blew the rack apart and ignited other shells. As i ran lit starts blew past me. It was nuts!
Pro racks are used repeatedly, because display companies generally do more than one show, ever. A rack built for July this year can be reused for July next year, New Year's Day, etc.
Hey Cody thanks again for taking my super dumb idea LOL about what if a shell wasn't loaded all the way down inside of the mortar for this awesome video! I liked how you showed what happened when the shell was loaded about a quarter way down the mortar tube.
One firework myth I've always been paranoid about is when you load a new shell into a tube you just fired out of while it's still smoking and hot. Will the shell go off early? Do you need to wait for the tube to cool off? How many shells do you have to repeatedly load into that same tube until it's too dangerous to put in another shell?
I usually tip my racks over cause there's always left over ashes in there and little cardboard pieces and when I want to reuse my rack I make sure to scrape any leftover ash that sticks on the sides to keep using in the future
Thanks Cody, I really appreciate the testing. Granted both racks were obliterated, but, only one HDPE tube was destroyed as opposed many more of the fiberglass tubes.
Interesting to see it doesn't make a huge difference when double stacked in the rack. Though I've personally seen better results when the racks are spaced and or single row. Had a finale pod with a tube detonate, while yes it did throw 4-5 tubes the majority of the 40-50 stayed in place.
What about doing the same thing except 1 rack with spacers and 1 rack with the tube touching?? I build all my racks with spacers because I like to think that with the extra space it might not blow apart the rack and keep the other tube aiming up. I also have a small screw from the bottom of the rack into the plug again in hopes that if that ever happens the mortars stay towards the sky.
Last 4th of july I had a holy nishiki blow up in an 18 shot spread out mega rack from longacre and it blew up the entire rack. Couldn't find the wood anywhere and found a handful of HDPE tubes the following morning. That really changed my perception on racks being safer.
Dude, thank you for this. I got the cat Kong shit show and the ball shells seems to be a hair smaller than the cannister shells. I don't have any DR9s laying around so I was worried about loading them in my dr11s. But I did discover if you can fuse timely, you can have the shells break at different elevations to give a deeper visual experience.
Great job!! Excellent comparison! Only thing I would add / change is just load a can right side up, but without the lift charge. Basically what you did with the shell upsidedown. Squibs happen and I am so glad you put it on video to prove HDPE can be just as dangerous as fiberglass tubes. Great job!
I have a fiberglass tube that was only used twice...I looked inside it and it looks like there is a nail or staple sticking up out of the cement plug somehow. These tubes in this kit were all kind of crap condition brand new. I imagine I shouldn't use that tube because it could puncture the shell right?
Yeah I was lighting Excalibur's one night and one of the shells we loaded in we didn't hear it touch the bottom of the tube and we lit it and boom the whole rack exploded and the worst part is that we were only about 5-7 feet away from the rack. Some of the effect it was a palm hit my leg which hurt and the sound was really loud to the point we're it was ringing your ears. And the shrapnel was insane it sent wood pieces all the way in our neighbors yard. Yeah it was bad. So u made sure it never happened again and I looked out to make sure they would hit the bottom of the tube ever since. But the tube did hold up since it was a Excalibur tube but it was still a goner.
It would be awesome if you took a wood rack and then Rachet strapped it down around the tubes between the 1x4s then blow it up to see if the straps will help hold everything together.
Please do more of these! If you want, you gotta set off 100 Excaliburs in a refrigerator one day to see if those would blow it apart. That would be such a good fucking video! 💣🥴
Hey Cody, I’ve been watching you for a while on a separate account and love your informative vids. And I wanted to suggest another canister shell video because they are the bomb! And I bought 5in jaw breakers but couldn’t enjoy them do to other fireworks drowning them out. Thanks for reading!
Had a shell blow in a 6 shot rack hdpe it swelled the tube but the rack was fine didn’t split just chipped sum of the wood where the tube was. Think it makes a difference but idk nice video tho
Well done 👍. It's good you did this video, I believe it shows all of us how dangerous ALL Fireworks 🎆🎇 can be. You may have prevented many injuries. Now do I get my shirt? No?? Ok just send me 30' of visco lol. You did good Cody AGAIN. One of many reasons why your #1!!!!?🧨🎆🎇
I curious how many people has done that and had that happen while in the middle of a show because I can say I had two of them happen a low shot and a blow out
Thank you for doing this. I've been asking to see a comparison for a while. While I do recognize a sturdy wooden rack is going to be the best option, I don't hate on milk crates. Everyone starts somewhere and no matter the rack the only real safety is distance.
By the way keep up these amazing Firework Videos! My Dad and I will be going to PGI this year. Are you going to PGI this year? If so would you want my Dad and I to meet you and light off amazing fireworks with you and your amazing crew? I always look forward to whenever a new TH-cam video goes up on your awesome channel!
The bottom line is that ANY rack can fail. The only way to make sure there is nothing catastrophic is to maintain enough distance. Fireworks can fail. You just have to mitigate the risks.
I'm so glad you did this. Maybe everyone will shut up now. I wish you used the fiberglass tubes in the wood or both hdpe in the crate for a fair comparison. The milk crate is hdpe and until you did the salute, it just split it, no shrapnel. I'd rather have some light pool plastic flying at me that plywood and screws
We need many MANY more Mythbusters type stuff for fireworks......and if anyone has ever wondered, two 5" shells lit at the same time will definitely and completely blow apart a box of medical "covid" masks to smithereens..
![[LIVE] : ONE ลุมพินี 89 | คู่เอก "ยอดไอคิว vs คิริลล์"](http://i.ytimg.com/vi/Z3vYkHJ_5Ig/mqdefault.jpg)
Cody, I'm glad you made this video. I feel like there's been this debate about wooden vs milk crate racks for years. Number one thing people need to do is not underestimate the power even consumer canister shells have. They can blow a rack apart.
I had a Cato with a Hk Harry salute ball shell on a 40 shot wooden rack . I Rachet strapped the center of the entire rack and when it catoed no wood or tubes flew . The strap held it all together . It was crazy how well the strap helped. At every club shoot I now use a ratchet strap around my racks
So you strapped it in the center between the top and bottom 1X4's where you can see the tubes exposed cause there is no 1X4 there correct? I'm doing this for sure. It still seems like th 1x4's would blow out. Were you using HDPE or fiberglass tubes?
@@bigmacfullerton7870 the middle where there is no 1x4 but I wouldn’t tighten it too much because that can cause the tubes to warp . Just enough to stop the tubes from flying out .
Btw I attended a PGI fireworks training class yesterday and asked about using ratchet straps and they said it’s probably not the best idea because those straps are not made of cotton and can catch on fire. While I agree, it still saved the tubes from flying out and causing chaos
@@TheWizrd- I’m way more worried about stuff flying around than I am some straps catching fire. I’m going to do it with my racks.
Yo Wiz every one has had one of those Harry's Cato 😂
@@wolfsvision940 So I’ve heard 😅. Those Sally’s hit hard though I’d definitely pick up another case
Appreciate the testing and showing the deviation I learned the hard way about the small shell in big tube result a couple of years ago
Working on building racks and this answered some questions I had. Thanks!
Really good educational video. This could actually save someone's life.
Safety vids are really important….keep up the good work. I saw one guy wrap tie down strips(the ones with rackets, that are used for strapping down loads on vehicles) and weaved it around the outside of the milk crates.
Bro that salute shell was just insane
Had to be shown for all the new pyros coming in this year
I wanna see more of this type of video. I am a fan of random demolition.
outstanding demo well worth the watch 10/10
I always tell helpers to act like its a rifle and use muzzle discipline. Never put a body part over a tube.
I used to shoot professionally for about 10yrs. Maybe 8 shows a year. Every so often people would double load a tube. I usually shot 3 and 4in. Anyway some asshat double loaded peanut shells. So 4 shells in a 4in rack. I was standing 5ft away when it went off. Never ran so fast in my life! Blew the rack apart and ignited other shells. As i ran lit starts blew past me. It was nuts!
Thanks for the safety tips. With racks I try to remember, it only needs to work once. If it malfunctions, I might be the only one who notices.
Pro racks are used repeatedly, because display companies generally do more than one show, ever.
A rack built for July this year can be reused for July next year, New Year's Day, etc.
@@scottwillis5434 wow dude, really?
So you answered my question about putting a small shell in a larger tube.
Hey Cody thanks again for taking my super dumb idea LOL about what if a shell wasn't loaded all the way down inside of the mortar for this awesome video! I liked how you showed what happened when the shell was loaded about a quarter way down the mortar tube.
Which Roman candles do you reccomend
How was the salute loaded in the fiberglass tube?
One firework myth I've always been paranoid about is when you load a new shell into a tube you just fired out of while it's still smoking and hot. Will the shell go off early? Do you need to wait for the tube to cool off? How many shells do you have to repeatedly load into that same tube until it's too dangerous to put in another shell?
That is true, we had it happen once a few years ago lol
What we do is take every tube out and or the ones you use and tip them upside down to let the debris and any embers so there is no premature ignition
@@CodyBPyrotechnics new video idea right here lol
If it still slides in the tube EASILY, then you're good to go. I usually tip them over to remove debris also.
I usually tip my racks over cause there's always left over ashes in there and little cardboard pieces and when I want to reuse my rack I make sure to scrape any leftover ash that sticks on the sides to keep using in the future
you have amazing vids, keep it up !!!!!
Wow that’s crazy how those shells went every were never put one upside down in the rack thanks buddy for the video 🤙👍💯😎
Cody great safety vid 👍🏼 make one on how to clean your mortar tubes what to get tools wise that would be dope
Thanks Cody, I really appreciate the testing. Granted both racks were obliterated, but, only one HDPE tube was destroyed as opposed many more of the fiberglass tubes.
Interesting to see it doesn't make a huge difference when double stacked in the rack. Though I've personally seen better results when the racks are spaced and or single row.
Had a finale pod with a tube detonate, while yes it did throw 4-5 tubes the majority of the 40-50 stayed in place.
Excellent, as with other comments, please do more safety-focused videos. Thanks for sharing!
Love this!! I would love more experiment / safety type videos!
Super glad you've done a video on this, thanks for blowing shit up s'more
Loved the educational video. Very interesting
Cody sir. You have the funniest run I've ever seen... haha thanks for the content brother!
Cody you should try making your own tube mabey?? If you do be careful
Thank you I learn something new 🙏
What about doing the same thing except 1 rack with spacers and 1 rack with the tube touching?? I build all my racks with spacers because I like to think that with the extra space it might not blow apart the rack and keep the other tube aiming up. I also have a small screw from the bottom of the rack into the plug again in hopes that if that ever happens the mortars stay towards the sky.
I really wanted to try that too in this video but unfortunately I don’t have any racks that have spacers :/
Hey if you come across skysong mad Max canister shells buy them. I've never had a can make my ears ring just from the launch till today
This was fantastic,
Last 4th of july I had a holy nishiki blow up in an 18 shot spread out mega rack from longacre and it blew up the entire rack. Couldn't find the wood anywhere and found a handful of HDPE tubes the following morning. That really changed my perception on racks being safer.
It will blow apart it's just wood only alternative is not to use a rack and space the tubes out and screw them on
Can't wait for the firework shopping and tours. 😁
Can you test how many shells u can light in the same tube before they get stuck?
We’ve successfully fired 3 four inch canister shells out of a 15” DR11 however I do not recommend trying it because it’s 50/50 when it works
I love your videos
that was so cool i can’t believe that the carts exploded
Dude, thank you for this. I got the cat Kong shit show and the ball shells seems to be a hair smaller than the cannister shells. I don't have any DR9s laying around so I was worried about loading them in my dr11s. But I did discover if you can fuse timely, you can have the shells break at different elevations to give a deeper visual experience.
This man just demolished 2 of his favorite milk crates... you better push that Subscribe button!
No hdpe tube where harm in making of this video 😂😂😂😂😂😂 this some entertainment experience lol
Great job!! Excellent comparison! Only thing I would add / change is just load a can right side up, but without the lift charge. Basically what you did with the shell upsidedown. Squibs happen and I am so glad you put it on video to prove HDPE can be just as dangerous as fiberglass tubes. Great job!
Thank you!
I have a fiberglass tube that was only used twice...I looked inside it and it looks like there is a nail or staple sticking up out of the cement plug somehow. These tubes in this kit were all kind of crap condition brand new. I imagine I shouldn't use that tube because it could puncture the shell right?
I definitely wouldn’t use it
Thank you for the video! ☺♥☼
Another one for the pyro books 🧨 📚
Great video.
Informative video👊👍
I can see the scenarios
Wow so cool omg 😲
So what do you prefer? Fiberglass for convenience and price or hdpe tubes for durability.
Can you test how much force the shells come out of the tube at. Imagine if someone was standing right above one went it went off.
It’s happened and it can kill you for sure
I hope you don’t mind me asking, but what state do you live in where you can light off fireworks year round? I would love to know!
NoDak!
Might need you to say you’re safe one more time 😂 youtube is lookin out 👀
that is actually a pretty cool shirt. its straight to the point but isnt overboard either, ya know?
Tremendously informative video 👍
I like the new intro!
what size tube did you use that was to large was that a 2 inch or a 3 inch
Yeah I was lighting Excalibur's one night and one of the shells we loaded in we didn't hear it touch the bottom of the tube and we lit it and boom the whole rack exploded and the worst part is that we were only about 5-7 feet away from the rack. Some of the effect it was a palm hit my leg which hurt and the sound was really loud to the point we're it was ringing your ears. And the shrapnel was insane it sent wood pieces all the way in our neighbors yard. Yeah it was bad. So u made sure it never happened again and I looked out to make sure they would hit the bottom of the tube ever since. But the tube did hold up since it was a Excalibur tube but it was still a goner.
Good demo. They may be ‘fireworks’ but they are also explosives 1.4. Don’t be careless.
Im glad you did this with Fiberglass tubes instead of PVC tubes lol…
Great video but now I'm scared to light off my racks. How far did those tubes fly?
Cool 👍😎 love it
It would be awesome if you took a wood rack and then Rachet strapped it down around the tubes between the 1x4s then blow it up to see if the straps will help hold everything together.
How many shots do you think those tubes are good for? I've never reused them before very curious
at least 20. ive put mine through that many so far.
100 or more
FOR SCIENCE! ☝🏼
The shell you put in the bigger tube what if you use a salute shell?
Going to try it with a enigma shell.
@@FiiTBike2 tell Me how it goes. Be careful
Please do more of these! If you want, you gotta set off 100 Excaliburs in a refrigerator one day to see if those would blow it apart. That would be such a good fucking video! 💣🥴
We don't set off explosions inside metal, because Shrapnel Bad.
Hey Cody, I’ve been watching you for a while on a separate account and love your informative vids. And I wanted to suggest another canister shell video because they are the bomb! And I bought 5in jaw breakers but couldn’t enjoy them do to other fireworks drowning them out. Thanks for reading!
Had a shell blow in a 6 shot rack hdpe it swelled the tube but the rack was fine didn’t split just chipped sum of the wood where the tube was. Think it makes a difference but idk nice video tho
Seems like that would be more down to the pressure the pipe was rated for than the rack type, since their pipe split but yours only swelled
Did that rack have spacers?
Let go brandon by jake fireworks 🤣
Awesome video. Thanks for making it, very informative.
0:45 oh I already found that out
Well done 👍. It's good you did this video, I believe it shows all of us how dangerous ALL Fireworks 🎆🎇 can be. You may have prevented many injuries. Now do I get my shirt? No?? Ok just send me 30' of visco lol. You did good Cody AGAIN. One of many reasons why your #1!!!!?🧨🎆🎇
Need that shirt foreal
I curious how many people has done that and had that happen while in the middle of a show because I can say I had two of them happen a low shot and a blow out
2 months till 4th of July My mind is just stressing on how much fireworks I wanna but can’t Wait any longer let’s Go Pyro Addicts🔥🧨🧨😂💥
Thank you for doing this. I've been asking to see a comparison for a while. While I do recognize a sturdy wooden rack is going to be the best option, I don't hate on milk crates. Everyone starts somewhere and no matter the rack the only real safety is distance.
HDPE > Fiberglass
What if you load 2 shells in one tube
Would like to see this experiment but with actual HDPE tubes in the crates
FOR SCIENCE!
You give a amazing show and I feel like watching Disneyland but without paying the theme park price
What size shirt are you wearing in the video ?
XL
Hello!
By the way keep up these amazing Firework Videos! My Dad and I will be going to PGI this year. Are you going to PGI this year? If so would you want my Dad and I to meet you and light off amazing fireworks with you and your amazing crew? I always look forward to whenever a new TH-cam video goes up on your awesome channel!
I’ll probably be there! Depends on our kid on the way lol
The bottom line is that ANY rack can fail. The only way to make sure there is nothing catastrophic is to maintain enough distance. Fireworks can fail. You just have to mitigate the risks.
I got a bad feeling about this ! 🤪
1257
Fire a shell at a piece of plywood.
W video
W comment w profile pic w username
@@CodyBPyrotechnics W Awesome
@@masyelraf w response
It even striped all permanent off the plastic or salfuff lol
The Karens at Pyro Universe are flipping their lids 🤣🤣🤣
This was a pretty interesting video for science purposes. Thanks for the destruction.
I'm so glad you did this. Maybe everyone will shut up now. I wish you used the fiberglass tubes in the wood or both hdpe in the crate for a fair comparison. The milk crate is hdpe and until you did the salute, it just split it, no shrapnel. I'd rather have some light pool plastic flying at me that plywood and screws
EARLYY!!
Haters gonna hate. Lol.
We need many MANY more Mythbusters type stuff for fireworks......and if anyone has ever wondered, two 5" shells lit at the same time will definitely and completely blow apart a box of medical "covid" masks to smithereens..
Great video
Great video