Check FlexiSpot C7 Max ergonomic chair at bit.ly/4giaCFd and I have worked with FlexiSpot for a few times and trust me, their products are really worth trying!
Yeah, it feels like me and my CAT have seen something along these lines, seen something real NOBLE, I might have watched it 1 to 6 times, but, what do I know
ya, except mjolnir is a titanium alloy, not steel... the reason Kats helmet was penetrated was becasue it was a needle rifle round, Blamite crystals that basically act like an API round...normal rifles rounds would be stopped by mjolnir even without shields, in the halo universe
@@commandingsteel Steel is stronger than titanium though. The strongest metal we have is ultra high strength steel, titanium is weaker but much lighter.
In case anyone was wondering, that blue tip at the end is a spicy incendiary type of .50 BMG round that is used in aircraft to shoot down other aircraft.
Installation 00 is trying to make a full suit as close to the lore as possible, I think he used a visor that cost like 20,000, it isn’t really affordable to shoot it for fun
@@LuigiClark2258 installation 00s helmet is also made of titanium, he commented on the previous video to get an insight of how strong his helmet will be if he shot it, so when he sees this video he will know
The visor isn't bulletproof. It's bulletproof to small ballistics. Meaning handguns. Anything higher penetrates which is why the ONI Mjolnir Engineering team installed energy shields into the MK.4 systems. If a Spartan got shot in the visor by anything equal or more than a DMR shot, it would be a fatality. The Spartans strength isn't being bulletproof per say. Although the suit in its metal or lattice materials is indeed bulletproof until shot by plasma energy based weapons. Which melts the metal. Their strength comes from pure muscle, heightened focus and accuracy, speed, and learning speed. They can shoot down an entire squad before they can even pull one trigger. The ability the Spartans have to fight in open gunfire is strictly due to their ability to move quickly and make every shot count.
@@Melanias_Consort Not really, spartan armour is basically immune to every type of bullet and even cannon fire, plasma is the only thing spartans worry about because bullets simply dont penetrate the metal, it can only dent or deflect off or the bullet crumbles. mjolnir is 3 times stronger than titanium.
For rifle rounds you don't really have a choice, you need either hardened steel or titanium, stainless steel is just not suited for resistance, it's a good multi-purpose steel but it's ultimatly not remarquable in any aspect appart rust resistance and affordability.
@@Rondigity92 Wasn't saying its stronger or any of that XD. Just that the metal his armor is a type of Titanium Alloy. as for the comment about it being really really good for steel, I just was saying it took it really well.
@@Rondigity92 this is stainless steel, which is far, far softer than hardened armor-grade steel. Additionally, it's 3D printed, which weakens the metal even further. Either way, neither a steel nor titanium helmet would do any good on a real battlefield in modern war.
@@Kiido11 I know... people just assume titanium is stronger than steel. When it's not its overall strength it's known for but how strong it is for it's weight.
This would reduce weight and effectiveness. I bet constructing it out of 3d printed asymmetrical conical tower mesh layers instead of solid stainless would make it even better, and cooling fins like on an air cooled cylinder head around the perimeter would help scatter straight on shots a bit more without adding a lot of weight, maybe some urethane between them to reduce spalling..
I think even as a gag this video shows that full on Master Chief style armor that actually serves to protect from fragmentation and some small arms fire isn't that distant of a possibility! super cool. Imagine 3d printed titanium or something exotic. would probably be effective with development
@@patrick_grundy You could probably reduce the weight of this by a lot by using actual armour grade steel rather than what they used here, much thinner, better protection, but a full suit would still be far too heavy to wear. Lore accurate MJOLNIR is titanium alloy, which would be a lot lighter, but probably still far too heavy to be practical without assistance or potentially just stuffing your soldiers with anabolic steroids, which is lore accurate, sort of.
A good helmet , the performance is extra. And the effects inside after the first injury but the blast with the fifty cal hmm may you don’t stay to long in any position . welcome to the future.
Too bad this armor is highly lore inaccurate, fun video showing how thick steel CAN be semi bullet proof, hence why armor still existed alongside first firearms for a while.
FEATURE REQUEST: Make a HALO helmet out of multi-layer Sheet Graphene (Carbon-60 Buckyball sheets!) AND some Tungsten Carbide outer layers with multiple in-between layers of Line-X Truck Bed Liner in-between the Sheet Graphene and Tungsten Carbide used as an energy absorber/dissipation mechanism! The Sheet Graphene SHOULD be able to take a .50 CAL round and maybe even a full 20 mm round! V
funfact the armor in the game is made of titanium alloy so in theory it could withstand even more then in the video regardless this is one of the coolest videos maybe next time do harder metal and maybe even the whole suit.
That's simply awsome. A real shame too destroy an expensive helmet but this indeed could provide real protection . Pretty neat . I am and always will be a halo fan. The good ole days.
The helmet that remains after the fight of Reach, looks sick :D Now do a full 3D printed suit an try to walk with it. And if it is not possible ask hack smith to make it possible 😂
It would be so dope to have an actual bullet riddled Spartan helmet laying around, at least add a custom shattered visor to it to make it look more bad ass!!! The disappointment on ur face at the end was legitimately palpable, when the visor was destroyed with such a lack of grace I felt your pain lmao. But you guys really do amazing work, these are 1x1 highly valuable pieces y'all are making on a weekly basis. Genuinely mind blowing shit as always y'all, and the song at the end was so sick haha
Remembering what I can from researching British Tankette armor, I would hypothesize it will survive a .22, maybe even a 9 mm, but be unable to stop anything else. The tankette used a mild steel that was a bit thicker and able to stop small arms fire, but rifles could punch through, if I am remembering correctly; I also recall the armor was not well treated, leading to serious inconsistencies in ballistic resistance across the tankette, leading to its poor ballistic performance. I also believe that stainless steel is a bit better than Mild steel, but not by much, if any, though cannot remember if that's true. EDIT: Welp, enjoyed it none the less, the video, helmet, and the hypothesis. Love when videos have those lol, even though I only got like one right so far out of a dozen or so.
I bet constructing it out of 3d printed asymmetrical conical tower mesh layers instead of solid stainless would make it even better, and cooling fins like on an air cooled cylinder head around the perimeter would help scatter straight on shots a bit more without adding a lot of weight, maybe some urethane between them to reduce spalling..
Check FlexiSpot C7 Max ergonomic chair at bit.ly/4giaCFd and I have worked with FlexiSpot for a few times and trust me, their products are really worth trying!
im so happy i like cake pop
Thanks! awesome vids
When do you guys get the time to make amazing wacky funny videos
I love your videos there awesome, I’m waiting for “we made the covenant IN REAL LIFE” can’t wait 🔥
Next time put a layer of composite in the middle and a layer of hard steel on top i think that will increase protection
.556 got thorough because you didn’t let the shields recharge, but we all know the .50 cal is always a one shot headshot
yes, its the sniper rifle
5.56
@@Blox117
Halo’s SRS-99 family use a Saboted 14.5x114mm.
Dude shooting a REGULAR BRUTE on LEGENDARY in Halo Infinite takes 3 shots from an s7 sniper
There aren’t 50 cal in halo, oddly
5:57 Master Chief shoots with both hands on gun for stability. In slow mo footage, the video clip is changed to one handed shooting.
They needed a continuity director 😅
Sniper shot through the back of the head at a downward angle… I feel like we’ve seen this one before
Yeah, it feels like me and my CAT have seen something along these lines, seen something real NOBLE, I might have watched it 1 to 6 times, but, what do I know
@@EnjoyedWriter63 yeah it feels familiar 🤔, like it's out of my REACH of thinking
That part was so MIND BLOWING, making the helmet stronger should be PRIORITY ONE
Kat didn't see that one coming though
sounds like a few people that had info on Hillary Clinton
This is an amazing video. It looks like a scene from a movie, but it's actually happening naturally. You guys did a great job.
Jackals approve of this video
Kat does not.
HAHAHAHHA
@@KarlDRGshe had a bodily experience on that, I think she approves 😂
Truest thing ever 🤣🤣🤣🤣
The United States space force also approved of this video
The hsb guys are legends for supporting the smaller channels, great video i really enjoyed it 😊
So basically when Kat got shot it was a done deal when she didn't have on her shields, gotcha
ya, except mjolnir is a titanium alloy, not steel... the reason Kats helmet was penetrated was becasue it was a needle rifle round, Blamite crystals that basically act like an API round...normal rifles rounds would be stopped by mjolnir even without shields, in the halo universe
@@commandingsteel yea already know that
@@commandingsteel the helmet is a weak point in the armor. the rest is much stronger
@@Blox117the helmet isn’t the weak point, the human neck is, lol. The helmet could have been thicker if our puny spines were stronger
@@commandingsteel Steel is stronger than titanium though. The strongest metal we have is ultra high strength steel, titanium is weaker but much lighter.
Surprisingly game accurate
The Covenant approves this video.
Yes. I love your profile picture
The UNSC see this as amateur
Work
The Insurrections approve of this video
@@jegvideos thanks, I drew it myself
The Sangheili Separatists pay their respects to this video
I remember watching these guy's videos when I was younger, happy to see they still get attention.
In case anyone was wondering, that blue tip at the end is a spicy incendiary type of .50 BMG round that is used in aircraft to shoot down other aircraft.
Thanks for that, I did not know that.
😴😴
What does spicy mean? They put Luwziana Hawt Saws on it?
It's an explosive incendiary that does massive damage to aircraft
Jesus loves yall
This was way too much fun to watch!
15:25 R.I.P. Kat ✊
Wort Wort gottem
We'll see her next Tuesday
Jesus loves yall
I think, flexispot is one promo I have not actually skipped. Wow
16:10 has got to be my new desktop wallpaper!
I hope the guys are all using some of this footage as Screen Saver material...
Checkout ballistic highspeed, they have tons of those shots
16:12.
Jesus loves yall
Finally a number on the high speed cameras sheeesh 😬😎
3:54 first
4:19 slo mo
5:10 second
5:21 slo mo
5:56 third
6:13 slo mo
6:59 fourth
7:15 slo mo
More American yapping
9:41 fifth
10:07 slow mo
10:45 6
11:03 slomo
13:11 50 cal
13:56 slow mo
15:14 blue tip
15:46 slo mo
The rest is more yapping
ty , can't stand the over-excited yapping and twitchy camera work >_
Thank you for your work. The editing on that one was... very different from the channels I usually watch -__-
Thanks, I was like... just stfu and get to it!
Thanks man
Legend
the video really starts here 👉 3:55
Thanks brother, they really spent their sweet ass time getting to it
10:06 coolest shot of irl master chief shooting a irl halo assault rifle
There was no recoil. It’s beautiful
Jesus loves yall
@ yes sir he loves you as well my friend god bless !🙏🏾❤️
The Ballistic High Speed guys are great. Genuinely funny and professional.
The helmet becomes invincible when cortana calls him “Stud Muffin” 👀
Cheif, what on Earth are you talking about?
Nah it will happen fr fr
What he means by that is the helmet gets hard
“Please put me down, I’m very tired” -master cutie patootie
That’s crazy😂
That last round was insane 😮🔥🔥🔥
3:49 I started hearing the beep beep beep beep beep from helmet 😂
Jesus loves you btw
I remember whatching these guys when I was 8 I’m 16 now yall made part of my childhood ❤thank yall
Please make a bulletproof visor
Installation 00 is trying to make a full suit as close to the lore as possible, I think he used a visor that cost like 20,000, it isn’t really affordable to shoot it for fun
@@LuigiClark2258 installation 00s helmet is also made of titanium, he commented on the previous video to get an insight of how strong his helmet will be if he shot it, so when he sees this video he will know
Não tem necessidade de fazer isso hoje em dia, porque da para instalar um óculos de realidade virtual no capacete.
The visor isn't bulletproof. It's bulletproof to small ballistics. Meaning handguns. Anything higher penetrates which is why the ONI Mjolnir Engineering team installed energy shields into the MK.4 systems. If a Spartan got shot in the visor by anything equal or more than a DMR shot, it would be a fatality.
The Spartans strength isn't being bulletproof per say. Although the suit in its metal or lattice materials is indeed bulletproof until shot by plasma energy based weapons. Which melts the metal. Their strength comes from pure muscle, heightened focus and accuracy, speed, and learning speed. They can shoot down an entire squad before they can even pull one trigger. The ability the Spartans have to fight in open gunfire is strictly due to their ability to move quickly and make every shot count.
@@Melanias_Consort Not really, spartan armour is basically immune to every type of bullet and even cannon fire, plasma is the only thing spartans worry about because bullets simply dont penetrate the metal, it can only dent or deflect off or the bullet crumbles. mjolnir is 3 times stronger than titanium.
Those high speed cameras are AWESOME!!!
You thought we wouldn't notice 😂 4:51 there is no dent in the stand, 5:09 at the "first shot" there's a dent in the stand. Someone missed 🤣
I was there and I can’t even remember what that came from! 😂
For rifle rounds you don't really have a choice, you need either hardened steel or titanium, stainless steel is just not suited for resistance, it's a good multi-purpose steel but it's ultimatly not remarquable in any aspect appart rust resistance and affordability.
And stainless is a bit of a soft metal
I am always happy to see Ballistic Highspeed in other channels. They deserve so much love.
that is the coolest camera ive ever seen. sick shots
Ahh yes, “Highspeed Ballistics”. Love these guys.
15:24 is the best photo of all a real halo helmet that has damage.
Jesus loves you btw
For display 👍battle damage helmet
You guys doing a fantastic job! Superb video!
Been watching this channel since Living With Chief, I love how y’all are still uploading banger videos! This is freaking awesome!
Dang. That was a superb video in every way
0:34 it was you!?!?!
🤔
Holy shit, its been 7 years since i last saw your channel from living with chief, god im glad this is back on my recommended
this is honestly amazing how he does this stuff. He is literally remaking my childhood dream
I love you guys also how’s Danial, Caleb and Kennedy doing? I would love to know
Holy moly what a video!! Well done guys, probably one of the best bits of content ever 👏🏻 👌🏻😎 great collaboration, well done to everyone involved 👏🏻
oh my, i can’t believe i got recommended this ! i haven’t seen your channel in years 😮
... (deep inhale) I have yet to meet one who can outsmart bullet.
Minigun sounds
Jesus loves yall btw
Master chief with the no sight shot was really impressive mark the bullseye on the side of the helmet crisp 👌 👏
Love ballistic high-speed. And I love the lessons they learned from Kentucky ballistic
10:20 the camera also captured the bullet's shockwave
For a helmet made of steel is really really good. Chiefs actual helmet is Titanium though but still great video and very cool.
Titanium isn't stronger than hardened steel, it's just stronger for its weight, so you would have a more lightweight helmet
@@Rondigity92 So you could technically improove its strength by doubling its thickness while maintaining the same weight ?
@@Rondigity92 Wasn't saying its stronger or any of that XD. Just that the metal his armor is a type of Titanium Alloy. as for the comment about it being really really good for steel, I just was saying it took it really well.
@@Rondigity92 this is stainless steel, which is far, far softer than hardened armor-grade steel.
Additionally, it's 3D printed, which weakens the metal even further.
Either way, neither a steel nor titanium helmet would do any good on a real battlefield in modern war.
@@Kiido11 I know... people just assume titanium is stronger than steel. When it's not its overall strength it's known for but how strong it is for it's weight.
3:30 The most crisp possible
Yess I have been waiting forever it feels like!!!
engineer gaming
Thanks for making the video. Supposedly there’s some plastics that are 20 times stronger than steel. Maybe that should be the next video 😉
7:49 Chief took his helmet off 🤔
That camera is dope!
Need to make that helmet out of AR500 steel.
As well as the whole armor. Now that would be heavy enough that you’d need to be a Spartan to wear.
Titanium would work, the Altyn helmet is made of that.
@@geoffsuiter1454the helmet is actually made of titanium lol
@@geoffsuiter1454 yeah and the altyn protected the user up too 44magnum
@@antoniochalking Titanium alloy if i remember correctly
This would reduce weight and effectiveness. I bet constructing it out of 3d printed asymmetrical conical tower mesh layers instead of solid stainless would make it even better, and cooling fins like on an air cooled cylinder head around the perimeter would help scatter straight on shots a bit more without adding a lot of weight, maybe some urethane between them to reduce spalling..
You are now truly impact props
I think even as a gag this video shows that full on Master Chief style armor that actually serves to protect from fragmentation and some small arms fire isn't that distant of a possibility! super cool. Imagine 3d printed titanium or something exotic. would probably be effective with development
not without an exoskeletal frame that adds strength. too much extra weight unfortunately
@@patrick_grundy You could probably reduce the weight of this by a lot by using actual armour grade steel rather than what they used here, much thinner, better protection, but a full suit would still be far too heavy to wear. Lore accurate MJOLNIR is titanium alloy, which would be a lot lighter, but probably still far too heavy to be practical without assistance or potentially just stuffing your soldiers with anabolic steroids, which is lore accurate, sort of.
A good helmet , the performance is extra.
And the effects inside after the first injury but the blast with the fifty cal hmm may you don’t stay to long in any position .
welcome to the future.
9:18 sponsorship ends
Cool stuff I'd like to see it with a bullet proof visor 💪🏾💯🔥
4:20 Ad time
im Premium 😂😂😂
Right 😅
Unfortunately I got premium
Good done soldier
Manual do mundo que fez essa armadura 😂😂
7:37 you skipped the 12 gauge slug.
Awesome!!!🔥🔥🔥
you should make a normal 3d printed helmet and use hacksmiths wolverine bulletproof skeleton
Ngl the visor looks even cooler now with the half visor and the impact 😮
10:14 you shot the other guns at an angle, so why didn't you shoot this one at an angle???
Love this next time use the legendary 7.63x39 round. I'm pretty sure that's gonna go through
Master chief aprovvves oof dis videao
C'mon, nothing can pierce Master Chief!! 💯
I need a collab with you and @Installation001 so bad see yall to make the most accurate chief helmet ever. 🙏
And Garand Thumb. His sub 1 minute live action BR55 video intro with ODSTs and the reporter was better than the entire Halo TV show.
Starts at 5:30
❤
It's funny because in the really halo game the sniper really is the only way to one shot kill players most of the time 😂 great video 👍
Too bad this armor is highly lore inaccurate, fun video showing how thick steel CAN be semi bullet proof, hence why armor still existed alongside first firearms for a while.
Great video
The high speed camera was amazing
FEATURE REQUEST: Make a HALO helmet out of multi-layer Sheet Graphene (Carbon-60 Buckyball sheets!) AND some Tungsten Carbide outer layers with multiple in-between layers of Line-X Truck Bed Liner in-between the Sheet Graphene and Tungsten Carbide used as an energy absorber/dissipation mechanism! The Sheet Graphene SHOULD be able to take a .50 CAL round and maybe even a full 20 mm round!
V
Very nice! 😁👌🏼
Would've been even cooler with a ballistic head in it! 😂😱
funfact the armor in the game is made of titanium alloy so in theory it could withstand even more then in the video regardless this is one of the coolest videos maybe next time do harder metal and maybe even the whole suit.
ImpactProps doing a front flip
That's very wicked 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥💯💯💯💯💯💯💯💯💯👍👍👍👍👍👍👍
That's simply awsome. A real shame too destroy an expensive helmet but this indeed could provide real protection . Pretty neat . I am and always will be a halo fan. The good ole days.
thank you brothers and flexispot, i need a full suit about 3 to 5 sets
AWESOME high-speed!!!
The helmet that remains after the fight of Reach, looks sick :D Now do a full 3D printed suit an try to walk with it. And if it is not possible ask hack smith to make it possible 😂
I'm a big fan and I love all your videos
Good editing!
Generally a silver tip 50 is api armor piercing incindiary round... But it was cool to watch the process!
Respect to the guy in the suit for the whole time
Amazing content tho
Bro, the part where it goes through is so cool like that needs to be in the halo intro
A metal Halo helmet actually has real military application.
you'd need an exo ...
Lines up with the game pretty well; without shields even the magnum can pop the chief
Indomitable Master Chief spirit
11:16 , this is a great example of sloped armour deflecting a shot
Tbh even military issued helmet are not rated for rifle calibers, it mostly used to stop shrapnels, and maybe pistol calibers. So i see this as a win!
The camera was amazing
It would be so dope to have an actual bullet riddled Spartan helmet laying around, at least add a custom shattered visor to it to make it look more bad ass!!! The disappointment on ur face at the end was legitimately palpable, when the visor was destroyed with such a lack of grace I felt your pain lmao. But you guys really do amazing work, these are 1x1 highly valuable pieces y'all are making on a weekly basis. Genuinely mind blowing shit as always y'all, and the song at the end was so sick haha
Thank you for the kind words!😁
WOW! Just WOW!🔥🔥🔥
Feels like im watching a bunch of shorts stiched together xD nice video tho
Fantastic video thank you!
Remembering what I can from researching British Tankette armor, I would hypothesize it will survive a .22, maybe even a 9 mm, but be unable to stop anything else. The tankette used a mild steel that was a bit thicker and able to stop small arms fire, but rifles could punch through, if I am remembering correctly; I also recall the armor was not well treated, leading to serious inconsistencies in ballistic resistance across the tankette, leading to its poor ballistic performance. I also believe that stainless steel is a bit better than Mild steel, but not by much, if any, though cannot remember if that's true.
EDIT: Welp, enjoyed it none the less, the video, helmet, and the hypothesis. Love when videos have those lol, even though I only got like one right so far out of a dozen or so.
I bet constructing it out of 3d printed asymmetrical conical tower mesh layers instead of solid stainless would make it even better, and cooling fins like on an air cooled cylinder head around the perimeter would help scatter straight on shots a bit more without adding a lot of weight, maybe some urethane between them to reduce spalling..