@@eriknulty6392 u should check out his other vid he did something very similar to this vid he actually did do it I think it’s in the link 10 shot rack he fast fuse it lit all 10 on 2 seconds was awesome
Interesting experiments, I always like these videos. Nice shells too! It's amazing how much difference pacing makes with the different fuse burn rates. It's all entertaining, but the wow factor definitely goes up with fuse speed.
I love this testing, thanks Cody! I am going to use my comet and mine consumer shells and use this method with my ignitors to time them better. I was cutting the lift charge open, sliding in the head and taping it back up. Then securing the wires around the rack nail head so that the wires didn't get pulled with the shell. Ill just slide my wire heads in and tape them to the tube. This will be much more efficient, thanks again Cody great video!
Within the past 2 days or so I've started preparing my show, starting with fusing up my racks. Im using the direct fusing method like you show using a drill to make holes in the tubes so having a follow up video using ball shells and different fuse speeds definitely helps. Thanks cody!
Regarding HDPE tubes: How far from the bottom did you drill the holes and how far apart are the two holes on each tube?.............................Thanks
For the ball shells breaking low I'd try getting some 2fa black powder and adding a little extra lift charge to the tubes. With some experimentation you can figure out the correct amount to get the height you want.
Great analysis give ur pyro friend a nice pat on his back. I'd say keep him around and put your brains together n rock it. You almost have an A rating let's get A+ + +>>>>>Onward
I loved this. Very interesting. I was starting to experiment a little years ago, but nothing like this. I wish these videos were around in the 80's 90s . Nice job.
Nice video Cody. It is rare that I need timing this precise on canister shells because when I do need that sort of thing I just use cakes. But the need does arise, for instance this year its tougher to find slices and sweeps and this is a way to create punctuation even when you don't have access to pro products.
Really appreciate this testing Cody! Wondering if a small sleeve put in the bottom of the tube would concentrate the lift charge more for those ball shell's.
Great idea and testing! I suggest you place a sleeve in the bottom of the tubes that maintains the density of the lift charge. It will also create a ledge for the shells to sit right on the charge.
You could try using the longer tube with hopes that the longer length could result in more acceleration of the shell. Looks like there's quite some gap between the OD of the shell and the ID of the tube, so differences could be almost non-existent, but it might be worth experimenting I guess.
@@CodyBPyrotechnics appreciate the honesty but you guys know more about fireworks than most. I used to work for phantom/galaxy fireworks and still pick up new things from you.
I would love to see you also break the cardboard cup at the bottom so it’s just the ball shell with time fuse. Then the ball and fuse would sit directly on the powder, with less space between shell and powder, creating more compression, possibly a better height that way🤷🏼♂️
That was stellar Cody also amazing fast fuse big daddy shells artwork is sick and those willows were perfect along with the bomba shells are amazing perfect timing and fusing plus angled was really interesting 🔥
Hey Cody! Idk if you can find it but if you get the chance. Check out fancy freedom by Winda. Incredible 3 piece cake set. Total of a 108 shots. 2 fanned cakes and one straight up cake in the middle. Beautiful finale. Red white and blue with gold palms I believe.
That new intro is sickkkk!!!! Awesome man. Great video. Love the content. But why would you want to cut the bottom of the shells off ? Didn’t understand why or what the point of it was.
What's the benefit of fusing a rack in this way? To make the rack proformance more like a cake? Vs the traditional way of running fuse across the top with zip ties? I guess faster detonation, but For ball shells I don't see much benefits due to the height loss. Especially for someone like me. Im a professionalpyro, but i do a lot of "budget" shows and fill finale racks with ball shells, i don't wanna give up any height... Eitherway Great experiments Cody, thanks for putting in the work, love the videos.
Well the only benefit we see out of this is to get continuous breaks as sometimes the leader fuse on regular canister/ball shell is inconsistent. So this way we eliminate the fuse all together, and avoid that problem. Other than that it’s really just our personal preference lol
Are ball shells or canister better? And what do you think about Excalibur and the black cat neon Diablo? I just picked up a 24 of Excalibur and a six of the neon Diablo for $112. Is that a good deal?
so i been watching your vids for a while now and have a question...where is the nearest state to oregon to be able to purchase and set off aerial displays?
@@CodyBPyrotechnics thank you will be a couple years from now but planing to save up and travel and do a REALLY nice couple thousand dollar show with my husband to be
Couldn’t you use gorilla glue or does have to hot glue to glue the fuses ??? ok I like the way that rack look I would make a bunch for my hdpe tube if would was cheaper lol what size are those drill bit did he use for the wood
Here’s the video I mentioned on how to get your canister shell racks to fire like a 500g cake every time: th-cam.com/video/bU_BPnz--Zg/w-d-xo.html
I made a video on this like 3 years ago
Surprised I haven't seen anybody else do it till now
i want to see every tube you have go off with that super fast fuse at the same time... FOR THAT SUPER FINALE!!! like a 100 shell finale LOL
@@Twiistedpyro I haven’t seen anyone do it until I met Garisson either. Just like you I cannot believe I didn’t think of this lol
@@eriknulty6392 u should check out his other vid he did something very similar to this vid he actually did do it I think it’s in the link 10 shot rack he fast fuse it lit all 10 on 2 seconds was awesome
Nice video
Interesting experiments, I always like these videos. Nice shells too! It's amazing how much difference pacing makes with the different fuse burn rates. It's all entertaining, but the wow factor definitely goes up with fuse speed.
I love this testing, thanks Cody! I am going to use my comet and mine consumer shells and use this method with my ignitors to time them better. I was cutting the lift charge open, sliding in the head and taping it back up. Then securing the wires around the rack nail head so that the wires didn't get pulled with the shell. Ill just slide my wire heads in and tape them to the tube. This will be much more efficient, thanks again Cody great video!
It would be interesting if you did a "at what point will a hot glue gun ignite a fuse" video! Thanks for the content!
Within the past 2 days or so I've started preparing my show, starting with fusing up my racks. Im using the direct fusing method like you show using a drill to make holes in the tubes so having a follow up video using ball shells and different fuse speeds definitely helps. Thanks cody!
Regarding HDPE tubes: How far from the bottom did you drill the holes and how far apart are the two holes on each tube?.............................Thanks
You always make people smile. 😃
Thank you for making this video. Nobody has a good video on fuse times and this was perfect!
yay upload!!!!
Cody B….living every kids dream.
dope vid bro you were right in the name of the video the breaks were perfected
Very expensive hobby and testing! I greatly appreciate the time and money y’all have put into these videos! Keep it up!
For the ball shells breaking low I'd try getting some 2fa black powder and adding a little extra lift charge to the tubes. With some experimentation you can figure out the correct amount to get the height you want.
I was really waiting for u to post a video 😂
The 1.25 fuse was epic! Great video
Great analysis give ur pyro friend a nice pat on his back. I'd say keep him around and put your brains together n rock it. You almost have an A rating let's get A+ + +>>>>>Onward
I loved this. Very interesting. I was starting to experiment a little years ago, but nothing like this. I wish these videos were around in the 80's 90s . Nice job.
That was awesome! Those were some fun little experiments. When you two get together, you know it’s going to be one cool video.
lovin the daily uploads! 🧨
Great video
I love the 1.25 seconds one
Going back up to pa tomorrow to finish up my fireworks shopping picking a 10 tube rack. Can't wait to fuse up some canister shells. Thanks Cody.
Tako Nishiki Bombs... find them. love them.... best willows ive ever lit off, by far.
That is really cool awesome engineering on those
Awesome everything was beautiful.
Nice video Cody. It is rare that I need timing this precise on canister shells because when I do need that sort of thing I just use cakes. But the need does arise, for instance this year its tougher to find slices and sweeps and this is a way to create punctuation even when you don't have access to pro products.
Love the pyrotechnics guys I love your entertainment
Great vid. I always wondered on fuse times. Thank you guys for doing all the work!
Some weird reason starting june 1 I start watching ur videos i watch like 10 every day rewatch and rewatch the ones i love your vids are amazing man
Really appreciate this testing Cody! Wondering if a small sleeve put in the bottom of the tube would concentrate the lift charge more for those ball shell's.
Pretty epic for just testing! 👍🙏
Great idea and testing! I suggest you place a sleeve in the bottom of the tubes that maintains the density of the lift charge. It will also create a ledge for the shells to sit right on the charge.
Cody, we need more of these videos there so intersting great job! 👏👏
Try doing the ball shells in DR9 tubes. The narrow gauge should do a better job of containing that loose lift charge. 🤞🤓💜
I was going to say the same thing. Should use dr9 for the ball shells anyway due to the shell width being smaller.
Very cool!
I just got my version 1 codyb jacket !! Perfect fit 😍😍😍😍😍😍
I wanna see this fusing technique used with multibreak shells!
I dig this stuff, this is literally analog programming! 👍😊👍✨🎇🎆
wow nice
cody on the grind and the fireworks he uses are hittin keep up the grind bro😼
That was fascinating and educational, thank you for showing us 👍👍👍👍
That was awesome 👌
Can't wait to see what yall are planning for the 4th!
Nice fireworks love it
Great demo pyro
Excellent!
👍👍👍👊😎
You could try using the longer tube with hopes that the longer length could result in more acceleration of the shell. Looks like there's quite some gap between the OD of the shell and the ID of the tube, so differences could be almost non-existent, but it might be worth experimenting I guess.
Very informative video
very cool video thank u man
nice video, i love shells
Cody as always amazing videos that u do I enjoy every firework that u set off
Love all this science that im never going to replicate but its definitely entertaining! I'll leave it to the professionals 👍
We are no professionals lol we are just like you! Just wanna see what works and what is possible :)
@@CodyBPyrotechnics appreciate the honesty but you guys know more about fireworks than most. I used to work for phantom/galaxy fireworks and still pick up new things from you.
so very cool thanks for sharing bro 👍
I cant wait till the 4th
I know one is not SUPPOSED to..But I like low breaks, I cannot lie. 🧨😜
Another great vid!
Very Nice, Thanks Cody. 🎆 🧨 👍
I would love to see you also break the cardboard cup at the bottom so it’s just the ball shell with time fuse. Then the ball and fuse would sit directly on the powder, with less space between shell and powder, creating more compression, possibly a better height that way🤷🏼♂️
Need D R 9 tubes with most ball shells.
Cool video of the break down would be nice to see more of these 🤙 to bad Oahu Hawaii fireworks are band 👎 no fun lol
Can you do a video of Green Lantern Salute 6pack shells
The difference betwwen science and fooling around? Is documenting the results.
what a fast paced on the ball shells on the racks(20s each)
I loved this one Cody, as I always do. That fuse is so quick (12min mark or so) I'd love to see what det cord would do:) A mess I know....
Learned something today thanks makes me want to try that now🤔😹✅🤙🏼
That was stellar Cody also amazing fast fuse big daddy shells artwork is sick and those willows were perfect along with the bomba shells are amazing perfect timing and fusing plus angled was really interesting 🔥
Dope ass video
Maybe try a thin cardboard plug when using the ball shells just to get a little better lift
I love your video s ❤
What state has the best rockets
Fourth of July in Chamberlain
Hey Cody could I suggest a mortar shells they are called shocker shells
Do you have a video of Big Slick 5’ canisters?
any advice what to look for when looking for a firework store
and those stores that have the buy 1 get 3 free places
Hey Cody! Idk if you can find it but if you get the chance. Check out fancy freedom by Winda. Incredible 3 piece cake set. Total of a 108 shots. 2 fanned cakes and one straight up cake in the middle. Beautiful finale. Red white and blue with gold palms I believe.
Cool
Good
you should do this but with salute shells
Interesting tests.. Still waiting for you to test the master's shells..
Look up “M100 CodyBPyrotechnics” I do have a vid on em
That new intro is sickkkk!!!! Awesome man. Great video. Love the content. But why would you want to cut the bottom of the shells off ? Didn’t understand why or what the point of it was.
Guessing they won't launch if the fuse isn't in contact with lift charge.
Have you heard of the rain god firework? 25 shot rocket cake?
You might need tighter tolerance, there might be to much pressure escaping around the shell.
Precisely what’s happening. I made a suggestion to solve this.
What is that blowtorch called that you have?? I want one for my 4th party
How many shots roughly can you run threw the fiberglass mortars before you need to change them
We need a 7in shell asap
What's the benefit of fusing a rack in this way? To make the rack proformance more like a cake? Vs the traditional way of running fuse across the top with zip ties? I guess faster detonation, but For ball shells I don't see much benefits due to the height loss. Especially for someone like me. Im a professionalpyro, but i do a lot of "budget" shows and fill finale racks with ball shells, i don't wanna give up any height... Eitherway Great experiments Cody, thanks for putting in the work, love the videos.
Well the only benefit we see out of this is to get continuous breaks as sometimes the leader fuse on regular canister/ball shell is inconsistent. So this way we eliminate the fuse all together, and avoid that problem. Other than that it’s really just our personal preference lol
Be interesting to see a 21 inch tube with double lift charge with 1 canister shell of your choice lol just my mind saying things
Where do you get those tubes at
👍
A spark near missed the camera. 4:41.
Cody where is the best place to buy fuse like you used in this video?
Cannonfuse.com
Okay thats where ive gotten before. Wow prices have tripled since last time I bought..
So can you just buy canister shells without tube sets
All canister shell kits come with 4 HDPE or fiberglass tubes
I know was just wondering a cheaper way
You can with 1.4pro shells . They are all 60 gram shells still but at least you can buy them bulk without the tubes and extra packaging.
Are ball shells or canister better? And what do you think about Excalibur and the black cat neon Diablo? I just picked up a 24 of Excalibur and a six of the neon Diablo for $112. Is that a good deal?
In terms of consumer fireworks, if you want a symmetrical break of color than ball shells are better, but cans tend to have more stars and more sound
so i been watching your vids for a while now and have a question...where is the nearest state to oregon to be able to purchase and set off aerial displays?
Probably Montana from June 24-July 5th
@@CodyBPyrotechnics thank you will be a couple years from now but planing to save up and travel and do a REALLY nice couple thousand dollar show with my husband to be
What track is that?
Couldn’t you use gorilla glue or does have to hot glue to glue the fuses ??? ok I like the way that rack look I would make a bunch for my hdpe tube if would was cheaper lol what size are those drill bit did he use for the wood
I’m not sure as he is the one that drilled them out, but it would be just a tad bit larger than green visco so the fuses slide in easily
Do you know the shell braking composition
Do it with a bit slower fuse
Why fuse something and take apart the shell in this way? What’s the benefits of doing this in curious?
Inconsistencies in the leader fuse that comes with the shell from the factory. Sometimes, there is a MAJOR delay. This completely eliminates that