Disclaimer: anvils were not designed to be crushed in this way, so just because an anvil was crushed easier in this experiment, it doesn't make it less of an anvil. Edit: Except for the one from India.
There's no way that was made of iron. The scratch test left some deep scratches. I'm wondering if it was some softer metal? Maybe a lead alloy like linotype or something.
@@E8S9 Do you think that it would improve with heat treatment? Put into charcoal fire, for an hour, then use bellows to get red hot, and then drop in lots of cold water?
If this video was Indian, then Chinese and Russian anvils would be melting like this. No country makes anvils with aluminum, or what is the point of making them when you can't use them?
I have a red Russian anvil exactly like this. I have had it since I was a child. It was part of a tool kit called "Young Technician." My parents gave me this kit around 1981 or 1982.
@@justins3810 I kept this anvil as a souvenir. Sometimes I use it to blunt small nails. In order to prevent wooden planks from cracking when hammering nails, it is recommended to blunt the nail tip. In such situations, a small, lightweight anvil is always convenient to carry with you.
@@vladislav-y28 I always just drill a pilot hole to prevent the wood from splitting. You blunt the tip of nail to prevent the wood spitting? Never heard of that before
ЧИЗ - Челябинский инструментальный завод. Был основан в годы войны на базе эвакуированного из Ленинграда завода Калибр. Наковаленка из ролика входила в набор "Юный техник". Отличный результат для детской игрушки!
@@Bubblegum_Bricks Понимаю, что у каждого своя точка зрения, но стоит помнить, что люди разные. Они могут отличаться от вас, но это не значит, что они плохие 🤝
Это именно что не детская игрушка. Маленький инструмент, сделанный по ГОСТу, сталь 45Л, закалка поверхности ТВЧ вроде. Просто продавали в наборах ЮТ в розницу. Но не только.
This russian anvil is from 1986 ussr tool set for kids named 'young technician'. It was in a wooden blue box with handle. Quite heavy for kid. There were a little hammer, hacksaw, vise, chisel, pliers. All was designed for kid hand and arranged well in box with manual to teach kid how to use these tools properly. Not for real works for adults. BTW the CHIZ (ЧИЗ) factory is still operating nowadays.
@@georgefalcon14I have a fact for you. In Spanish, avocado is called 'aguacate' and this word has its root in the nahuatl language (Aztec empire) 'ahuacatl', meaning testicle. 🧐🥑
@@АлександрМиронычев-к8х старый миф... тут на другом канале пару недель назад видел, что в сша на заводах до сих пор работают советские чпу станки из 80х, по легенде их добывали через третьи страны в обход санкций, обычно через канаду...
[John calls his foster parents, the T-1000 answers the phone] "Heloo is sexy bbe girl?? U have beautiful bobs?? Wy you not say reply? I want kiss ur beautiful bich pusy." [Arnold] "Your foster parents are dead."
Russia and the USA: wouldn’t it be funny if this thing can tank a 100 ton hydraulic press lol China: cost effective and reasonably strong India: we should make an anvil out of wax
@@tristanschmidt1239 case hardened at most , its still pot metal and wouldn't actually work as it would take dents on the surface or explode the first time you miss the hot metal and hot the face
In those days, the US knew how to make things that last forever. A relic of a bygone era. By the way, the Russian anvil was actually made in my city around the 70s of the last century, that is, back in the USSR.
Yup, it's actually forged as you can see from the failure mode. Today 99.99% of anvils and even vices are made out of cast iron/steal/whatever pot metal India used, some use good cast steel like the Russian anvil, but it's never going to be as good as a forged part. It's especially infuriating when it comes to vices as they are under tension a lot more than anvils, and cast iron/steel is pretty brittle under tension, so as soon as you start whacking hard on something in a vice, your vice breaks, unless you got an old vice that was made well by forging the parts.
That's what I thought immediately on sight too, this is an OLD U.S. anvil. So, the comparison with what looks like a newer Russian anvil is a little deceptive.
When you applied pressure on the Russian and American anvils I was actually afraid for the hydraulic press...I thought it was going to die right in front of our eyes 😄😄😄
@@llamacebu216 India is still incredibly rich in natural resources, with vast reserves of minerals like coal, iron ore, bauxite, and manganese that fuel modern industries and economies. They’re one of the world’s largest producers of coal, iron ore, and even have rare earth minerals that are key to modern technology. Their mining sector is thriving, and they continue to export minerals globally while also focusing on sustainable development. So, the idea that India has been "depleted" doesn’t hold up, their resources are a huge part of their growth story today!
Truely. Some things I never thought I was interested in. There’s a guy that eats really old military MREs and reviews them. There are episodes on the civil war and WW1 mres that he tries to it’s interesting af.
:))). you didn't need to because the main contender, the red Russian anvil was out of a kids' toy toolset, the "Young technician". It came in a plywood box together with multiple other cool tools back in the days of the USSR.
@@pro05 спорный момент, учитывая толщину рабочей части у американки, всё равно что сравнивать бойцов из разных весовых категорий. у маленькой наковальни нет цели выдерживать по 100 тонн нагрузки
Russia and the US: using ancient cold war tech so the anvil can survive the nuclear war China: reasonable thing for home craft which’s gonna work pretty well. India: wax.
@ well, yes, but I personally have Anerican B&D instruments as well as Russian Sibrtech. No problems with them, unlike with, for example, Chinese Ellix.
Honestly just looking at Indias I knew it would perform the worst... but I didn't expect it to be THAT bad. I mean holy shit the nail just went straight in
Yep, it'd be good to spend the same amount of money for all the countries next time. I can buy a US cast iron piece of metal and an indian forged steel and get the opposite result any day.
I don't know what's more impractical out of these three things: needing a anvil, even more specifically a miniature anvil and finding the best one to hold out the longest against a hydraulic press. But just in case this day comes I'll know to go with the USA.
If the USA stops playing socialism and financing the socialist experiment around the world, that in 200 years Russia will have a chance to overtake the competition or disappear into oblivion with all socialistic regimes.
Russian one slightly softer but by a marginal amount. It’s scratched more. That’s about it lol. Good old American steel. It may not look pretty but it’s more reliable than your ex when it’s the time of month to send them child support XD
The US and Russian anvils performed excellently. Especially since the Russian one is from a toy set. Can you imagine how wonderful it would be if instead of quarreling, that the US and Russia worked together instead? That would be a dream come true.
USA, Russia, and Chinese anvil are all good for day to day use. Realistically, a black smith is not going to be able to put anywhere close to the +70 tons (that's like 50 cars) on a anvil for day to day use. If the Chinese anvil is significantly cheaper than the other two, then I would see nothing wrong with getting it. The Indian anvil however is absolute trash since is failed the basic nail test. It's also extremely soft so a few hammer strikes would eventually warp it.
It actually is an actual anvil bubba same for the us and others. Imagine being so triggered that you didn’t know they also make them for use outside of toys
@@DonaldMcNuGGeT lets not forget the one from US is ticker of course it will handle more weight, and it wasn't make for this purpose. if it was a competition each of the other countries would've done better them this.
Скорее всего наковальня США из CORTEN, он не ржавеет, а покрывается защитной пленкой и поэтому кажется ржавым, но прочность высокая. Если обратите внимание на мосты в США, то некоторые выглядят ржавыми, но на самом деле они из CORTEN, поэтому они прослужат очень долго. Нужно сравнить со шведскими металлами, они в этом преуспели побольше многих.
Yashhh! L'oxidació superficial de l'acer corten patinable crea una pel·lícula d'òxid impermeable a l'aigua i al vapor d'aigua que impedeix que l'oxidació de l'acer prossegueixi cap a l'interior de la peça. Això es tradueix en una acció protectora de l'òxid superficial enfront de la corrosió atmosfèrica, amb la qual cosa no cal aplicar cap més tipus de protecció a l'acer, com la protecció galvànica o el pintat.
@@MBTIinRealLifeхитрость сплавов типа CORTEN в том, что их целенаправленно делают ржавеющими на поверхности конструкции, а внутренние части делаются устойчивыми к коррозии. Из-за чего на внешних сторонах образуется тонкий слой оксида железа(ржавчины) защищающий конструкцию от негативных факторов внешней среды, а устойчивая к коррозии внутрення часть не даёт развиться сквозной коррозии даже спустя десятилетия службы конструкции в атмосферных условиях. Самый большой минус подобной технологии - она очень дорогая в изготовлении и примерно стоит от 600 до 1200$ за тонну(в зависимости от сорта) когда нержавеющая сталь стоит от 450 до 900$ за тонну. Так же сталь Corten крайне плохо переносит соль, кислоты и солёную аэрозольную взвесь, что сильно ограничивает её применения в морском климате и промышленности в отличии от различных сортов нержавеющей стали. Так что такую сталь из большинства сфер вытеснила более дещёвая и универсальная нержавейка
I'm a tiny little blacksmith, my father and grandfather were also tiny blacksmiths. It's common knowledge in the tiny industry that Indian anvils are good for nothing, I broke one forging sewing needles and thumb tacks, which to be fair are very large are robust products but they are nothing like tiny American anvils. My grandfather always used to say "tiny grandson, get me some water, but let the tap run so it's not warm"
The Indian steel worker used to be a chef. When the manager of the steel plant told him to make some mild steel he added a ton of bell peppers to the furnace instead of high grade iron ore.
Круто! У меня был такой набор😊 Самым ценным инструментом из набора были тиски. Именно в них я зажимал во время испытаний стволы самопалов и поджигов. Потом сделал самопал под строительный патрон - красота! Сосед заложил меня маме и она все выбросила, весь арсенал! Я рыдал. Там были дюралевые ножи и звезды ниндзя, кастет с шипами, кистень и великолепный самопал с водопроводными хомутами и шпингалетом на резинке роли бойка. А бомбочки из сифонных баллончиков? А дымовухи из гидропирита с анальгином? Эх, детство, где же ты? 😢
The funny thing is that after flattening all the anvils, the main battle tanks of their countries turned into. Russian in T-34, American in Sherman, Indian.. into an elephant.
One SMAALL nuance here - the USA one is rusty, meaning it's old, produced by oldschool material. Why didn't you get a new one? It's either, because it's not as durable, or because they are not even produced over there anymore.
No, there’s American Made anvils, but the price for one is NOT worth the risk of breaking it for a TH-cam video. And most likely, an American Made anvil that size is probably hard to find to begin with.
Unions brainwash factory employees into thinking they deserve $50 an hour for a mediocre job but manufacturing companies said "Nope, buh bye" and moved production plants into different countries decades ago. Unions are now irrelevant and obsolete.
People prefer cheaper Chinese goods; that's how economics works. However, the US is leading in software development and needs to develop its own chip manufacturing industry to compete with Asia. The US cannot compete with Asia in producing easily-made goods.
@@corcorandm exacly duraluminium but still aluminium. if they would make solid anvils off train railroad tracfks the result would be better. but still india anvils are cheapest on the world xd
the india anvil almost looks like its made from lead or zinc rather than iron or steel given how it had almost no noise from being scratched by a nail and how it smushed together so easily without having chunks of material coming off like the russian and american anvils in the 500 ton press
ZN AL. called znal. zincium and aluminium mix. but i know they are making it from duraluminium but still weak. howewer strongest anvils and vices are from pakistan. they are literally forged instead of cast iron. . also another problem is with material quality. anyway 100% iron is soft as butter. you need manganium steel for anvils if you want consider it anvil. or just get piece of railroad track and make it anvil out of that. im sure that anvil will withstand longer than your family
ЧИЗ это Челябинский Инструментальный Завод. Он был уничтожен в начале девяностых, а его помещения стали торговым комплексом потому что был одним из двух в мире заводов, производящих уникальное специальное измерительное оборудование, второй был в США. Так что это скорее всего ещё советская наковальня.
India anvil. The iron in the India anvil apparently has no carbon in it, which would make it very ductile. The addition of carbon is what makes steel, which is much harder to scratch and much more resistant to distortion
@@robertmendick3195 I think that they may skip the heat treatment, which would be to get it cherry red for about 2 hours, and then plunging it into cold water.
Are you sure it was even iron? I have never seen a nail (which is soft by itself) going into iron or steel, not even through the cheapest construction steel.
Impressive USA and Russian ❤, i did some Blacksmith's work in the 70s, and im looking early next year for a full sized anvil, this tool seriously helped civilisation move forward ❤❤ thanks 😊 for the video ❤❤😂😊
If you're not looking to mortgage your house for one, take a look at the Vevor black 132 pound one. I've been giving mine all kinds of h3ll for three years now and its still in excellent shape - though the pritchel is useless
It is an unfair testing, you need to have some size and some shape anvils to do the test, in this case you can clearly see 6:37 that the wideness of US one is about 4 times of that of China's, I know you want to Make America Great Again (MAGA), but you should not fool yourself, that is like the US team had face in Olympic swimming competition.
Chinese products sold for the Chinese market are either on par or in some cases superior to US products. Which makes sense considering 40% of products "made in the US" are mad with Mexican and occasionally Indian steel (for pots, pans and other household products). American steel is reserved for the industrial/commercial sectors. Trump's tariff increases should change that.
I once bought 1000 zip ties off eBay thinking there was no way China could screw up something as simple as zip ties. Guess what? Half of them snapped in my hand while tightening them. Great price though. 😂
@@maluminse6013 The trick here is China can make the cheapest things possible and also incredible things. Best description is "you get what you pay for". I own multiple $300 Chinese headphones, they give euro brands a run for their money
@@JABelms You can definitely get quality from China. Lots of high quality smartphones and increasingly good quality TVs for example. Now, that's mostly because the Chinese government required that western countries share their proprietary technologies as a condition of entering the Chinese market.
@@maluminse6013 Nah, almost every EV on earth and even Tesla literally uses Chinese tech and SONY has been using Chinese tech to make their high end headphones (MDRs). They are not all Western, in fact the holy trinity of Taiwan, China and Korea has been outdoing the Western tech for a while now, hence economic woes
I agree, but it’s also made to allow boats to run underneath. I’d be curious to see if the U.S. anvil incorporated the beam at the bottom of the arch to see if that had any impact on its resilience to the upward pressure being applied. Russias had a structural failure of its steel; not necessarily the design. But with that said, Russias arch could have been more pronounced like the U.S. One thing I noticed with the U.S. anvil is that the inside edges of the arch were beveled. I’d be curious as to how that positively impacted its structural strength.
The paint on the Indian anvil contributed about 50% of the strength.
😂😂
😂😂😂
😂😂😂😂
😂😂😂😂🤣
𝚆𝚑𝚊𝚝 🤣🤣🤣🤣🤣?
The good thing about indias is it's so soft you can probably mold it back into the shape of an anvil with your hands
😂
I'm wondering if it was aluminum, either that or it was never tempered.
@@greenspiraldragon hardened clay
It is a safety anvil. No brittle chunks of steel flying at your eyes.
@@greenspiraldragon hardened cow turds
- Excuse me, I'm looking for an indian anvil
- In the dairy section
- Thank you
Ghee anvil
lol
Thank you, please come again
indian one had no hardness LOL
The Indian made one is likely 80%+ lead.
Disclaimer: anvils were not designed to be crushed in this way, so just because an anvil was crushed easier in this experiment, it doesn't make it less of an anvil.
Edit: Except for the one from India.
There's no way that was made of iron. The scratch test left some deep scratches. I'm wondering if it was some softer metal? Maybe a lead alloy like linotype or something.
I dunno what it is made of, but I'm sure it's edible.
@@TheBayzentits a key ingredient in Tikka Masala.
Indian anvil notice: Please store the anvil in the fridge, dont let it out in the sun, it could melt.
@@E8S9 Do you think that it would improve with heat treatment? Put into charcoal fire, for an hour, then use bellows to get red hot, and then drop in lots of cold water?
it's butter,right?
If this video was Indian, then Chinese and Russian anvils would be melting like this. No country makes anvils with aluminum, or what is the point of making them when you can't use them?
The Indian one was supposed to be served with whipped cream.
Now I see why India is China 2.0
You should buy a Chinese or Indian hydraulic press. This way you avoid all those problems.
Best comment yet! 👏🏻
Lol
😅
😆
Goed idee ! Rotzooi.
I have a red Russian anvil exactly like this. I have had it since I was a child. It was part of a tool kit called "Young Technician." My parents gave me this kit around 1981 or 1982.
What do you use a tiny anvil like that for?
@@justins3810they’re good for jewelry making.
@@W_H_K makes sense
@@justins3810 I kept this anvil as a souvenir. Sometimes I use it to blunt small nails. In order to prevent wooden planks from cracking when hammering nails, it is recommended to blunt the nail tip. In such situations, a small, lightweight anvil is always convenient to carry with you.
@@vladislav-y28 I always just drill a pilot hole to prevent the wood from splitting.
You blunt the tip of nail to prevent the wood spitting? Never heard of that before
Chinese Anvil : Ali Express
Indian Anvil: Painted Butter
A tad too brittle, but really, for day-to-day use probably works fine, at least the work surface is decently solid.
Buys cheap anvil surprise face Wouldn’t wanna get a nice one that makes good old USA look bad
Those anvils looked huge until they were shown with hands 😅
Jesus loves you
@@the_boogey_man0you can't fool me, imposter!
Just big hands
ikr 🤣
@@the_boogey_man0 Correct. Jesus loved me in the shower when I was sent to prison.
Love the fact that you can nail your Indian anvil to the bench to stop it moving around.......bonus point.
😄
And when you hit it with a hammer it changes size and shape like shooting at the moon in vice city
It’s more like it’s moving around the nail… 😂😂
@@robwhite6395 that's some great imagery right there lol
I would say it's more an integrated theft protection. ;-)
ЧИЗ - Челябинский инструментальный завод. Был основан в годы войны на базе эвакуированного из Ленинграда завода Калибр. Наковаленка из ролика входила в набор "Юный техник". Отличный результат для детской игрушки!
Thats pretty cool. Cheers.
Although I don't like Russians, I must admit that they know metallurgy.
@@Bubblegum_Bricks Понимаю, что у каждого своя точка зрения, но стоит помнить, что люди разные. Они могут отличаться от вас, но это не значит, что они плохие 🤝
@@PlagueKing_LordFalix Спасибо! А что именно тебе понравилось? 😊
Это именно что не детская игрушка. Маленький инструмент, сделанный по ГОСТу, сталь 45Л, закалка поверхности ТВЧ вроде. Просто продавали в наборах ЮТ в розницу. Но не только.
USA 🇺🇸 & Russia 🇷🇺 engineering is excellent
But which of the two did better?
@@TheBanishedWind
Russia
@@elche6730 You might want to rewatch the video
@@elche6730did you watch to the end
@@elche6730Are you regarded?
Me: "Chinese anvil will definately be last place"
India: "Allow me to introduce myself"
Chinese anvil was the worst though.
@@UJ00UJtbh Indian is the worst among all. Nail test more important for an anvil since you're not gonna use 100 tons force on it during craft.
I think China was the worst because it broke, it was the most unreliable at the end of the day. But, yeah, you don't want to buy indian either
Do you know why every anvil is new except the US one? Because the new ones are made in China also😂
@@UJ00UJ
Not in this video, India anvil got penetrated by nail and got crushed with less force than Chinese anvil.
India is selling a brick of butter disguised as an anvil.
Wax..😂
India anvil must be lead
Yeah that anvil ain't steel or iron
LOL!!!
true
Props to India in the end. It made it to 100 tons and didn't snap.
Sounds of hammers hitting each anvil:
China: clack clack clack
Russia: clang clang clang
USA: ding ding ding
India: pththp pththp pththp
Как я это прочитал со звуком разбавленного масла
If you run out of butter you can spread the Indian anvil on your toast.
😂😂
🤣
😍
I am from India and I approve this message
😂
Now you understand the power of Indian actors against heavy machinery in movies.
They are powerless against british trains however
xDD Underrated comment
😭😭😭
🤣🤣
💀
After countless years of cartoon characters being crushed by Anvils, we now have the ability to give them a taste of their own medicine
This russian anvil is from 1986 ussr tool set for kids named 'young technician'. It was in a wooden blue box with handle. Quite heavy for kid. There were a little hammer, hacksaw, vise, chisel, pliers. All was designed for kid hand and arranged well in box with manual to teach kid how to use these tools properly. Not for real works for adults. BTW the CHIZ (ЧИЗ) factory is still operating nowadays.
Thanks, I enjoy learning facts about everything!
@@georgefalcon14I have a fact for you. In Spanish, avocado is called 'aguacate' and this word has its root in the nahuatl language (Aztec empire) 'ahuacatl', meaning testicle. 🧐🥑
Hammer in the box but no sickel? Odd
@@rodmar1874 Yo soy abogado🥑
@@mato9884 :) Sickel is in another wooden tool box named "young harvester".
India nail test made me laugh so hard 😂😂😂
i bet you dont even need the press to get it in lmao
Hey... at least you can nail some better steel on top of it so... I see it as win! 😂
Not sure how hard you should be laughing considering they build their own nuclear power plants as well. 🤣
🤣🤣
like it's made of chewing gum :D
"Do not repeat at home"
Yeah like the average person has a bunch of anvils and a hydraulic press just lying around
You never know
@@jameswolfe24If they do, I'm pretty sure they know what they're doing.
I got a hydraulic press, but it aint 300 ton
Yeah, but that Indian unit look like it would fail by driving over it.
I just assumed they were being sarcastic! Maybe not though.
Next challenge: Hydraulic press an nuclear bomb. Let's see how tough is hydraulic press machine is 😂
Красная наковальня-это детская игрушка времён СССР!!!! Ха-ха-ха!!!! Отличный результат.
It was hard to see that little red andvil go into the press. I'm glad it survived.
Well, almost.😢
Если бы она была времен СССР у них бы задымился пресс
В СССР почти все заводы были американские, отсюда и результат!
@@АлександрМиронычев-к8х старый миф...
тут на другом канале пару недель назад видел, что в сша на заводах до сих пор работают советские чпу станки из 80х, по легенде их добывали через третьи страны в обход санкций, обычно через канаду...
Terminator music to use a hydraulic press is the perfect soundtrack.
And liquid terminator in form of anvil.
Tadam tam dadam. Tadam tam dadam. Toorooroo
Da dam Dan Dan da dam! Da Dam dan dan da dam!
Agreed! The music was perfect!
You mean terminator 1st climax scene 😂
In an Indian press, he would've been back.
Useful, I was trying to figure out which brand of mini anvil to put 100 tons of stuff on. Thanks for saving me from buying the wrong one!
🤣🤣
I got me cracking up on the public toilet with this one 😭
behold, someone who doesn't understand the concept of dynamic stress
@@shamancredible8632 u do ?🤣😭
From Russia 🇷🇺 with LOVE ❤️
🐽🇷🇺 🤣
Old school USA and Russia performed very well 👍
Yeah
Yeah
Both are good. USA did even better than Russia though.
@@ChristmasEve777 thought one of the legs on the American were going to break on the pressure test, that one had me wincing lol.
Не россия а СССР
India spearheading innovation with the first room temperature liquid anvil
@@Kevin-j8o7w I have an old homemade one made from out of a foot or so of railroad track.
india couldnt send their people to the moon. only russia and usa could, so they came up with this anvil instead
Теперь понятно из какого металла сделали жидкого терминатора, из индийского.
This was worth translating 🤣
😂😂😂
So glad I translated this comment. That's fucking hilarious, bro LOL!
[John calls his foster parents, the T-1000 answers the phone]
"Heloo is sexy bbe girl?? U have beautiful bobs?? Wy you not say reply? I want kiss ur beautiful bich pusy."
[Arnold]
"Your foster parents are dead."
😂
Russia and the USA: wouldn’t it be funny if this thing can tank a 100 ton hydraulic press lol
China: cost effective and reasonably strong
India: we should make an anvil out of wax
Is probably made with soft steel or iorn you can tell the china one was at least hardened by how it broke
What makes you think its cost effective and not simply inferior material?
@@tristanschmidt1239 case hardened at most , its still pot metal and wouldn't actually work as it would take dents on the surface or explode the first time you miss the hot metal and hot the face
@Cold_Cactus you referring to the Chinese or inda one
@@tristanschmidt1239chinesse would hold 100tonnes if it had the shape of russian or USA anvil
2:02 LMAO THE- Aahhhhha I expected it but I didn’t think it would actually happen 😂😂😂😂
I literally told my gf this was gonna happen as a joke...wtf
The USA anvil looked like a 1950's survivor. They don't make them like that anymore.
planlı eskitme !
Old American tools are coveted. Most manufacturing went to China.
In those days, the US knew how to make things that last forever. A relic of a bygone era. By the way, the Russian anvil was actually made in my city around the 70s of the last century, that is, back in the USSR.
Yup, it's actually forged as you can see from the failure mode. Today 99.99% of anvils and even vices are made out of cast iron/steal/whatever pot metal India used, some use good cast steel like the Russian anvil, but it's never going to be as good as a forged part.
It's especially infuriating when it comes to vices as they are under tension a lot more than anvils, and cast iron/steel is pretty brittle under tension, so as soon as you start whacking hard on something in a vice, your vice breaks, unless you got an old vice that was made well by forging the parts.
That's what I thought immediately on sight too, this is an OLD U.S. anvil. So, the comparison with what looks like a newer Russian anvil is a little deceptive.
When you applied pressure on the Russian and American anvils I was actually afraid for the hydraulic press...I thought it was going to die right in front of our eyes 😄😄😄
Plot twist : on closer inspection when flipping over the american anvil we noticed a "made in china" mark.
@piggywahwah 😄😄😄
Russian-made crap is barely better than indian
@@piggywahwahthe same with russian
Did you see the 500 ton hydrolic press part?
Индийскую наковальню можно использовать как подушку-продавится по форме головы за пару ночей)
Особенно, если сверху индийской кувалдой пару раз плескануть )
Ils ont dû prendre de la pâte à modeler pour la fabriquer.
Она просто из магазина приколов
面白いコメント
Индусы нашли тот горн в котором расстворили жидкого терминатора
9:40 literally i was laughing 😂 while seeing India's anvil....
ഇത് ഒന്ന് കണ്ട് കൂടെ ചിരിക്കാൻ ഒരു മലയാളി ഇല്ലല്ലോ ദൈവമേ 😂🙏
I knew the U.S & Russia weren’t gonna disappoint
It's nice having mines and minerals. Europe depleted all valuable minerals from India to create the USA.
👍
@@llamacebu216 India is still incredibly rich in natural resources, with vast reserves of minerals like coal, iron ore, bauxite, and manganese that fuel modern industries and economies. They’re one of the world’s largest producers of coal, iron ore, and even have rare earth minerals that are key to modern technology. Their mining sector is thriving, and they continue to export minerals globally while also focusing on sustainable development. So, the idea that India has been "depleted" doesn’t hold up, their resources are a huge part of their growth story today!
@@llamacebu216 lol dude its been 100s of years let it go. 😂😂
@@llamacebu216 brainwashed take. Don't know if it's from dumbass colonialism guilt, or dumbass xenophobic-nationalism.
@@llamacebu216 😂 you're drunk
I've had stale bread that's harder than the Indian anvil.
No, you don't.
@@iridios6127 Yes he did
@@johnroberts3824
nobody had it.
i have aluminum knife, which cut any bread, but not withstand any soft steel.
Indias metal really isn't bad when flattened it has a good appearance it just has to be further processed to increase its purity.
@@iridios6127 No, you don't
У индусов краска твёрже наковальни.
@@U.F.O.Technology
Нет.
@@iridios6127
Да.
@@iridios6127да
@@PIROPHILAX ты кто?
@СлаваУкраїні_ГероямСлава твой самый жуткий кошмар
China: India, how tf did you end up making something worse than me?!?!
I think the main lesson here is it is amazing what people (including me) will watch on TH-cam.
...and the friends we made along the way...
Truely. Some things I never thought I was interested in. There’s a guy that eats really old military MREs and reviews them. There are episodes on the civil war and WW1 mres that he tries to it’s interesting af.
Hilarious, I was thinking the same thing loool.
LOL!
Probably the most interesting and funny thing I've watched in a week. Lol.
Had me cheering on the U.S. anvil like I was watching the Olympics
More likely the US one is made in China
:))). you didn't need to because the main contender, the red Russian anvil was out of a kids' toy toolset, the "Young technician".
It came in a plywood box together with multiple other cool tools back in the days of the USSR.
So American 🤣
😂 твои ожидания оправдались)) действительно из США было лучшим
@@pro05 спорный момент, учитывая толщину рабочей части у американки, всё равно что сравнивать бойцов из разных весовых категорий. у маленькой наковальни нет цели выдерживать по 100 тонн нагрузки
So I just watched anvils being squished for 10 minutes. 10 minutes I’ll never get back. I’ve really got to get my life together.
no, you need to watch more
Nah 10 mins well spent
Considering what else is on YT, that was a 10 minute educational video.
One of us.
Yeah… y’all are probably right
Now i understand that why i used to see pieces of rails in india instead of an anvil 😂......... btw didn't expect that from indian anvil
Russia and the US: using ancient cold war tech so the anvil can survive the nuclear war
China: reasonable thing for home craft which’s gonna work pretty well.
India: wax.
Not defending te crap no. 1 and2, it would be much more informative if they used nowadays USA and rssian products.
@ well, yes, but I personally have Anerican B&D instruments as well as Russian Sibrtech. No problems with them, unlike with, for example, Chinese Ellix.
None of them are from any other countries every anvil was from the country of the creator
Самое точное описание эксперимента 😂
🤣😂🤣🤣🤣😂
The Indian anvil would probably melt if left out in the sun.
Indian egos as well
of course, it's a brick of painted butter
@@jorsik1449 butter mixed with cow dung
Sdop make joke aboud our gread manufacdure !
@Spacemonkeymojo wuth accents of wine made up of waterr 😂
Honestly just looking at Indias I knew it would perform the worst... but I didn't expect it to be THAT bad. I mean holy shit the nail just went straight in
THIS SUPERNATURAL RACISM WILL CREATE A BLACK HOLE OF SO MUCH FAKE NEWS COLONIZATION BROUGHT HOW TO END CANNIBALISM AAAAAAA
i actually thought that would happen, but i was surprised that i was right. Its india of course its gonna be low quality trash
😂😂😂
Yep, it'd be good to spend the same amount of money for all the countries next time. I can buy a US cast iron piece of metal and an indian forged steel and get the opposite result any day.
Bro ....come to India and see the REAL METAL ...what are seeing I don't know where this metal he actually purchased from😂
I don't know what's more impractical out of these three things: needing a anvil, even more specifically a miniature anvil and finding the best one to hold out the longest against a hydraulic press. But just in case this day comes I'll know to go with the USA.
It always ends up with Russia vs USA. I guess it's inevitable at this point lmao.
If the USA stops playing socialism and financing the socialist experiment around the world, that in 200 years Russia will have a chance to overtake the competition or disappear into oblivion with all socialistic regimes.
Russian one slightly softer but by a marginal amount. It’s scratched more. That’s about it lol. Good old American steel. It may not look pretty but it’s more reliable than your ex when it’s the time of month to send them child support XD
@@metalrain300 good old american steel is probably russian too
@@alexanderlolamax5144
Edgar Thomson Steel Works
Located in Braddock, Pennsylvania 1876
So no, not Russian, very American still
@@metalrain300could be using imported steel
It’s actually pretty smart of India. They have a crap product so that you (the customer) have to call and speak to their representatives for hours.
Then you get scammed via phone call.
Helo, wat can I help you? *hindi accent*
And then we can scam you. Money 🤑
😂😂😂😂😂❤
It's about the customer call associates we met along the way.
I like how the one from India is adjustable.
Bad one... As bad as people from India speaking English
Ah yes, it's not a bug, it's a feature!
Good one!
but only one way
The metal alloy contains naan bread
@1:55 There is no way that is solid steel😂. Is it hollow !?Is it lead!?
The US and Russian anvils performed excellently. Especially since the Russian one is from a toy set. Can you imagine how wonderful it would be if instead of quarreling, that the US and Russia worked together instead? That would be a dream come true.
Дык сорятся не США и Россия, а империалисты. Но им выгодно представить это как вражду народов. Ведь воевать и умирать будут простые люди.
Agree
Для этого надо сменить власть капитализма на власть народа .
@@andrewzyazev9112 Fuck of, commie. С любезност от България.
russia would need to stop committing genocidal war crimes on a scale not seen since Nazi Germany for that to happen
USA, Russia, and Chinese anvil are all good for day to day use. Realistically, a black smith is not going to be able to put anywhere close to the +70 tons (that's like 50 cars) on a anvil for day to day use. If the Chinese anvil is significantly cheaper than the other two, then I would see nothing wrong with getting it.
The Indian anvil however is absolute trash since is failed the basic nail test. It's also extremely soft so a few hammer strikes would eventually warp it.
they are just toys...
the nails in each countries are different too
@@zeicoldMy son regularly puts 50 to 100+ cars on his toy anvil so yes it's important
@@zeicoldThey're not, those are the anvils for jewelry work
Китайская наковальня лопнула и по комнате разлетелись осколки.При работе от неё могут отколоться мелкие осколки и попасть в Вас.Это не безопасно.
Если кто не в курсе, это русская наковальня из детского набора "юный техник") это не настоящий инструмент)) это не шутка
It actually is an actual anvil bubba same for the us and others. Imagine being so triggered that you didn’t know they also make them for use outside of toys
Don’t sweat it. It is exactly the same is with the rest of anvils.
@@DonaldMcNuGGeT lets not forget the one from US is ticker of course it will handle more weight, and it wasn't make for this purpose. if it was a competition each of the other countries would've done better them this.
Тогда и американская наковаьня из детского набора юний техник
@vn3946 а почему ржавая?)
America has more heavy metal in our water supply than India does in their anvils
Скорее всего наковальня США из CORTEN, он не ржавеет, а покрывается защитной пленкой и поэтому кажется ржавым, но прочность высокая. Если обратите внимание на мосты в США, то некоторые выглядят ржавыми, но на самом деле они из CORTEN, поэтому они прослужат очень долго. Нужно сравнить со шведскими металлами, они в этом преуспели побольше многих.
Yashhh! L'oxidació superficial de l'acer corten patinable crea una pel·lícula d'òxid impermeable a l'aigua i al vapor d'aigua que impedeix que l'oxidació de l'acer prossegueixi cap a l'interior de la peça. Això es tradueix en una acció protectora de l'òxid superficial enfront de la corrosió atmosfèrica, amb la qual cosa no cal aplicar cap més tipus de protecció a l'acer, com la protecció galvànica o el pintat.
Так они в итоге преуспели в прочности состава металла или в наилучшей ржавчине?
@@MBTIinRealLifeхитрость сплавов типа CORTEN в том, что их целенаправленно делают ржавеющими на поверхности конструкции, а внутренние части делаются устойчивыми к коррозии. Из-за чего на внешних сторонах образуется тонкий слой оксида железа(ржавчины) защищающий конструкцию от негативных факторов внешней среды, а устойчивая к коррозии внутрення часть не даёт развиться сквозной коррозии даже спустя десятилетия службы конструкции в атмосферных условиях. Самый большой минус подобной технологии - она очень дорогая в изготовлении и примерно стоит от 600 до 1200$ за тонну(в зависимости от сорта) когда нержавеющая сталь стоит от 450 до 900$ за тонну. Так же сталь Corten крайне плохо переносит соль, кислоты и солёную аэрозольную взвесь, что сильно ограничивает её применения в морском климате и промышленности в отличии от различных сортов нержавеющей стали. Так что такую сталь из большинства сфер вытеснила более дещёвая и универсальная нержавейка
@ИльяГенш-к4ц интересно
Thank you! I'd never heard of CORTEN before, and now I know something new.
Good job, India! I've never seen an anvil made from such shiny clay before!
An anvil made of nails beats the Indian anvil.
Nails are made from hardened steel. If the anvil is less hard, that is what will happen every time.
When he started india's anvil on the 500 ton press. I said that's going to be a pancake. I wasn't too far off.
Genuinely thought it was going to squirt out the sides like plasticine
Maple syrup
@@CarpeDiamCoramDao That would be Canadian Anvils Lol
Putty.
I could probably probably bend it with my bare hands
I'm a tiny little blacksmith, my father and grandfather were also tiny blacksmiths. It's common knowledge in the tiny industry that Indian anvils are good for nothing, I broke one forging sewing needles and thumb tacks, which to be fair are very large are robust products but they are nothing like tiny American anvils. My grandfather always used to say "tiny grandson, get me some water, but let the tap run so it's not warm"
You telling me Indian Street Food is harder than their Anvils?
Damn 😂
Get your head out of online gutter most of it is propoganda
That’s not an anvil that’s just what they $hit.
@@ajtay9534 on your face ?
Yes
The Indian steel worker used to be a chef. When the manager of the steel plant told him to make some mild steel he added a ton of bell peppers to the furnace instead of high grade iron ore.
At least Indian metal was actor in Terminator 2
Secret ingredient: chilli powder
USA - Titanium
Russia/USSR - Stalinium
China - Poorinium
India - Junkinium - Bollywood accessories
Sorry, Titanium would have been the first to flatten.
china - chinesium
@@michaell397 Politely disagree.
USA= planet sherpooo
@@maksimkempe3425 - th-cam.com/video/1m7kwpQSAAw/w-d-xo.html
Круто! У меня был такой набор😊 Самым ценным инструментом из набора были тиски. Именно в них я зажимал во время испытаний стволы самопалов и поджигов. Потом сделал самопал под строительный патрон - красота! Сосед заложил меня маме и она все выбросила, весь арсенал! Я рыдал. Там были дюралевые ножи и звезды ниндзя, кастет с шипами, кистень и великолепный самопал с водопроводными хомутами и шпингалетом на резинке роли бойка. А бомбочки из сифонных баллончиков? А дымовухи из гидропирита с анальгином? Эх, детство, где же ты? 😢
The nail going through the Indian anvil like a hot knife through butter 😂
It's a tool mismatch, an India anvil require an Inda nail !
Indian butter is also too soft, they put in in a jar instead.
@@joejoe-the-original Так у них и стул жидкий
😂😂😂😂
Looks like a Russian nail.
The funny thing is that after flattening all the anvils, the main battle tanks of their countries turned into. Russian in T-34, American in Sherman, Indian.. into an elephant.
The indian one turned into Millenium Falcon, actually
Looks more like cow dung. They love that there apparently
An elephant is probably more durable then Indian steel metal
Indian metal idea was first demonstrated in Terminator2
Hah!
I prefer the indian anvil since it is clearly made of lead. They pay a good price at the scrap yard :D
I would guess aluminum, since lead would be very very heavy.
is made from melting scrap iron, that is not even steel at all, is a crap
Mate, that's prime chedder, even more expensive.
"Sir, what alloy are you using for your Anvils?" "Of course we are using the best Iron from Alang, with a dash of Gummi Bears"
I love these two 🇷🇺🇺🇸
If they stop creating problems humanity will rise
Ask the people of Donbas who started the Ukraine problem in 2014 it wasn’t Russia
@@timminh468no, it was.
Russia sucks.
@@timminh468 ask the Ukranian parents whose children are kidnapped by Russia.
Sadly both countries are run by fuckin psychopaths and full of propaganda lol
This video has shown me that as an American i will wildly cheer in patriotic fervor for my country in any event.
never been more proud of a little chunk of metal before lol
Same…
I’m still feeling sympathy for the Indian anvil though. 🥞
As an American I steel go for U.S. made steel, but the Russian steel was pretty darn good. 👍
German/Europe Steel is better...no mix is pure and clean....USA or Russia is multi Mix Babel Steel.
Это была наковальня для детей, из детского набора. Профессиональная наковалья из СССР сломала бы пресс
@@Black_Cat-23impressive like their space program in Ukraine
@@Black_Cat-23How do you know?
@@comradekarlvonschnitzelste8218 Cry us a river ukie
I didn’t know a hand held anvil existed 😂
What’s it for, making a butter knife? 😂
Geez. I thought you were using full sized anvils until you cut to you holding them!
China: Our products are universally bad.
India: Hold my curry...
Wanna be cool.?
Holda my curry Sar 💀☠️
😂😂😂
@@vinayakopDO NOT REDEEM THE ANVIL! SAAR!
Sar but we love israel women why u do that to us
One SMAALL nuance here - the USA one is rusty, meaning it's old, produced by oldschool material. Why didn't you get a new one? It's either, because it's not as durable, or because they are not even produced over there anymore.
No, there’s American Made anvils, but the price for one is NOT worth the risk of breaking it for a TH-cam video. And most likely, an American Made anvil that size is probably hard to find to begin with.
There are a lot of American made anvils and they are easy find they are just more expensive
@@emrysgeibhendach7572 this is a mini-anvil, how much expensive could it be. Come on...
@@moetocafe while they are more expensive there still affordable at usually around 27-45 dollar depending on the brand
@@moetocafe Probably more a case of being hard to find. As I assume these are more of a novelty item than an actual tool.
Amazing information! Your videos said it all for what is worthy to buy. Do more!
Proves why we should have never abandoned US Steel!
Don't worry, it will be a Japanese company, not an Indian or Chinese company, that acquires US Steel.
The problem started when we allowed one company to control the mass production market of steel in the US. It's only going to get worse.
@sirmonkey1985 Yeah single point source is insane, especially after the covid 19 semiconductor catastrophe
Yes 100%
Unions brainwash factory employees into thinking they deserve $50 an hour for a mediocre job but manufacturing companies said "Nope, buh bye" and moved production plants into different countries decades ago. Unions are now irrelevant and obsolete.
2:20 Indian product 😂😂😂
😂😂
😂
The Indian anvil looks like it's made butter.
Ever saw the collision of 'Tata' vehicles with other vehicles like ford or jeep. Come back when you are matured son. 😎
Sauf qu'ils arrivent a cuisiner avec les pieds eux.
Would be interesting to use a thermal imaging device to see how hot the pieces become under load.
Definitely!
That's something most people wouldn't realize.
the india one turns to a liquid then back into a solid, pretty impressive thermal transfer
Was wondering if they’re hot after pressing; all that input energy has to go somewhere, and would bleed off as heat
ive been under so many loads and let me tell you its always hot 🥵
6:37 to be fair, see how thin the chinese Anvil is. IMO 70 ton was pretty solid for the shape.
Where did you find this American anvil? In a museum?
Where else? But when the lying, cheating grabber is back in office, America will produce their own anvils again.
Yeah the USA unit was a beautie. Nicely engineered. Wouldn't mind one them myself.
Perfection as a legacy of a bygone civilization
@@brucekellett2269yeah, very sad for the American one. I would love get one like this for me
Borrowed from a neighbor. " hey here's your anvil back, thanks"
"Wtf were you hammering???"
Sad thing. The USA one is probably 60 years old because nothing is made in the USA anymore.
True.. but even today the best anvils are made in either the US or Germany.
People prefer cheaper Chinese goods; that's how economics works. However, the US is leading in software development and needs to develop its own chip manufacturing industry to compete with Asia. The US cannot compete with Asia in producing easily-made goods.
Nothing, really? you drama queen.
@@ibot2157 😂 you are a tool made in the USA.
@@ibot2157 🤣 you're a tool made in America.
Nobody has ever believed that India has quality steel.
India has ship breaking yards, so they do have some good steel taken from those ships. But their anvil was a POS.
Aluminum, aluminium
They are softy, why do you think they've won so many Noble Prices, my best teachers come from India ♻️♻️♻️♻️
@@corcorandm exacly duraluminium but still aluminium. if they would make solid anvils off train railroad tracfks the result would be better. but still india anvils are cheapest on the world xd
Так і про Китай казали
Gotta say the terminator intro had me going that's top that 😂 👍
It always ends up Russia vs USA.
@@DumbCarGuy Cuz Russia and the US are only 2 powerful nations that can change the course of humanity.
NATO vs Russia
Without any chances for Russia although
@@skpavlenko ну ну..
@@skpavlenko 😂 lol. We have already seen in Ukraine what US is capable of 😂🤣
And that's why the Bollywood's "T-1000 terminator" gets melted.
Stallinium never disappoints.
Indeed comrade 🫖☕️
🤝🫡
American Steel superior
@@sarttee confirmo
@@sartteeIts price tag is very superior. Several times higher price for almost identical performance.
Thanks for telling me not to crush anvils in the beginning of the video. I could’ve died
the india anvil almost looks like its made from lead or zinc rather than iron or steel given how it had almost no noise from being scratched by a nail and how it smushed together so easily without having chunks of material coming off like the russian and american anvils in the 500 ton press
Parecía fundición gris
These are jewelers anvil it will be soft.
@@MandolinKasi ah, thank you for the explanation.
i bet it's made from shit
ZN AL. called znal. zincium and aluminium mix. but i know they are making it from duraluminium but still weak. howewer strongest anvils and vices are from pakistan. they are literally forged instead of cast iron. .
also another problem is with material quality. anyway 100% iron is soft as butter. you need manganium steel for anvils if you want consider it anvil. or just get piece of railroad track and make it anvil out of that. im sure that anvil will withstand longer than your family
"Do not repeat at home"
Oh okay, guess I´ll just bring my house sized hydraulic machine back into the basement then.
ЧИЗ это Челябинский Инструментальный Завод. Он был уничтожен в начале девяностых, а его помещения стали торговым комплексом потому что был одним из двух в мире заводов, производящих уникальное специальное измерительное оборудование, второй был в США. Так что это скорее всего ещё советская наковальня.
Не старайся, американцям це не цікаво.
Eu me importo!
Тоже сразу про Советскую подумал. Все научится своимм именами не научатся.
@@Патріотичний-я2т Мне на них похрен, написано же на русском для тех кто его знает.
У меня есть такая же наковальня. Власть захватили дураки и уничтожили то, что создали умные.
After 500 tons, Indian anvil end up like roti canai😂
America: good
Russia: good
China: good enough
India: it visually appears to be the desired object
India anvil. The iron in the India anvil apparently has no carbon in it, which would make it very ductile. The addition of carbon is what makes steel, which is much harder to scratch and much more resistant to distortion
Roughly how much carbon would need to be added to the Indian mini-Anvil to match up with the Chinese, Russian, or American one?
@@FallingPicturesProductions That's a good Wikipedia question.
@@robertmendick3195 I think that they may skip the heat treatment, which would be to get it cherry red for about 2 hours, and then plunging it into cold water.
Are you sure it was even iron? I have never seen a nail (which is soft by itself) going into iron or steel, not even through the cheapest construction steel.
It didn't even look like that iron has iron in it.
USA: “Yeah”
Russia: “Da”
India: “Soft as a laddu!” 🥮
Hungary the best
Russia and America carried in this one 🔥🗣️🗣️🔥🔥
Impressive USA and Russian ❤, i did some Blacksmith's work in the 70s, and im looking early next year for a full sized anvil, this tool seriously helped civilisation move forward ❤❤ thanks 😊 for the video ❤❤😂😊
If you're not looking to mortgage your house for one, take a look at the Vevor black 132 pound one. I've been giving mine all kinds of h3ll for three years now and its still in excellent shape - though the pritchel is useless
Американская имеет более толстую середину чем русская . Русская и китайская одинаковый чертеж . Американская целый кусок
It is an unfair testing, you need to have some size and some shape anvils to do the test, in this case you can clearly see 6:37 that the wideness of US one is about 4 times of that of China's, I know you want to Make America Great Again (MAGA), but you should not fool yourself, that is like the US team had face in Olympic swimming competition.
I didn't think it was possible to out-China China but India managed.
Chinese products sold for the Chinese market are either on par or in some cases superior to US products. Which makes sense considering 40% of products "made in the US" are mad with Mexican and occasionally Indian steel (for pots, pans and other household products). American steel is reserved for the industrial/commercial sectors. Trump's tariff increases should change that.
I once bought 1000 zip ties off eBay thinking there was no way China could screw up something as simple as zip ties. Guess what? Half of them snapped in my hand while tightening them. Great price though. 😂
@@maluminse6013 The trick here is China can make the cheapest things possible and also incredible things. Best description is "you get what you pay for". I own multiple $300 Chinese headphones, they give euro brands a run for their money
@@JABelms You can definitely get quality from China. Lots of high quality smartphones and increasingly good quality TVs for example. Now, that's mostly because the Chinese government required that western countries share their proprietary technologies as a condition of entering the Chinese market.
@@maluminse6013 Nah, almost every EV on earth and even Tesla literally uses Chinese tech and SONY has been using Chinese tech to make their high end headphones (MDRs). They are not all Western, in fact the holy trinity of Taiwan, China and Korea has been outdoing the Western tech for a while now, hence economic woes
Those arch bottoms handled 100 tons, the arch one of the greatest building inventions.
Not on 500 Tons. In fact on 500 t the arch was the weakest point.
@SpiderF27 you would have to be one hell of a strong man to hit an anvil with 500 tons of force.
@@SpiderF27 500 tons man I said 100t is a great feat, plus the arch it’s worldly recognized as one of the strongest support structures.
I agree, but it’s also made to allow boats to run underneath.
I’d be curious to see if the U.S. anvil incorporated the beam at the bottom of the arch to see if that had any impact on its resilience to the upward pressure being applied.
Russias had a structural failure of its steel; not necessarily the design. But with that said, Russias arch could have been more pronounced like the U.S.
One thing I noticed with the U.S. anvil is that the inside edges of the arch were beveled. I’d be curious as to how that positively impacted its structural strength.
Russia be like you can win the anvil test but you will not gonna win the war. 😂