These are brilliant videos with no stupid loud music this man deserves every penny he earns he his a very hard worker all on his own I wish you a very prosperous 2024 you deserve it take care
You can always tell a propper mechanic - home made tools - Bolt hammer & Sigot shaft chisel - rather than the "Hollywood Tool Box" mob - !! LOL my reply to the tool snobs = It works doesn't it !!! Hope you have a GREAT New Year and get some time off from the cold & wet !! 👍👍
😂😂im laughing at Hollywood tool box mob.....I'm assuming I know the brand....recently i explained to my coworkers here in Catalunya...in the Uk its quite normal for hipoteca....mortgage.....on a tool box the size of a block of flats......but almost devoid of tools inside....😂
@@marcmorris-kb9ry Yer its insane - my mate has spent OVER £100,000 on boxes & tools & coud have had the exact same unbranded tools for £2- 3000 - a lot of companys now offer lifetime G/Tee for 1/4 the price !!
I could barely handle changing my oil. And you are out here changing out clutches!!!! Hahahha love the channel. I’ll sit here and watch your videos that’s are 1 hour plus!!!
Thank you Kevin, You didnt get any weather brea at all this week. Heavy wind and then rain. Could really feel it all the way through the bones. Worst for me was always the fingers. No matter what kind of gloves I had on, cold fingers and pain all the way down to the spine. One part of winter work in snow I dont miss. Happy New Year to you and your family. Regards from Sweden.
on no not Greater London mind you London is supposed to be a bit warmer than any where else ,hope you have had a good Christmas and have a happy new year and thanks for all the videos over the last year
Managed to dodge all the traffic in the early morning hours .. you’re absolutely right it’s very tropical down there in the jungle 😁🍻🍻.. happy new year 🥳
Well thanks for the feedback. Very much appreciated. 🍻 But I’m not black. I’m not brown. Definitely not white. I’m the 0.1% of the 8 billion population that is Grey 🥳… often referred to as the Greys that walks amongst men. 😎.. Always appreciate the support. Keep tuning in 🔧 🔨 🔩
I am very pleased seeing your face fully covered with the exception of the eyes while working on the Renault Megane, this was actually part of what attracted me to your channel, it simply shows a technician that appreciates the essence of ppe in discharging his automobile repair duties. Lol!
Full sending never lifting 😏 🤙 mobbin deep 🙌 happy holidays/happy new yr to you and your family ty for the therapeutic videos from life appreciate yeah brotha 🙏
Got to pay you huge compliments and respect fella for what you do. I have done a clutch change on an old mk2 Granada back in the day while at work & on my back and never again I can tell you - but compared to today's cars you would have had it done in an hour the way you operate - no fancy electronics / plugs or sensors back then, just the bell housing clutch and cable and drive shaft to the rear. I wish you an awesome 2024 and stay safe.
Very efficient hats off to you! Did my TwinAir 500 yesterday under similar conditions on the street (took me 2x2 afternoons). A few things I learned the hard way: #1: The top bolt or the starter motor is a pain refitting, but you can just about reach it from the top reaching trough the engine bay treading the first part by hand once you got the bottom two loosely tightened. #2 Pull back the other driveshaft (engine side) as well either by disconnecting the steeringrod and bolts to the springleg or the method shown here. I destroyed one friction plate because I could not get the gearbox on strait. So took me 2 additional afternoons (only noticed the broken plate when I had put the car back together again) #3 Double check both drive shafts are all the way in before refilling the transmission fluid (it makes a mess). Things not shown here for the 500 but might be good to know if one also makes the mistake of not hiring a pro: #1 Drain the transmission fluid before removing driveshafts. #2 The refilling plug requires a uncommon H12 hex. #3 The drain and refilling plug both like ask for Teflon/gas tape. #4 Replace the fork also it is worth it. Break the plastic sleeves (in order to extract it (once you removed the arm). You can jam top one down with an extended socket when you pry away its edge #5 Consider a dual mass (valeo) flywheel for this engine it greatly improves drivability and lifespan (says my one day experience driving with my one) Things I learned from this video and wished I knew : #1 No need to remove the entire bumper. #2 No need to entirely remove/disconnect the starter motor. #3 Invest in some rubbermats #4 There are other crazies laying in the rain changing a gearbox also and some legends do it on a daily basis!
@@bobgorman9481 Yeah I understand and that isn’t the case for most other engines, but a two cylinder 899cc is an other beast entirely. Due to a narrow powerstroke compared to the entire rotation of the flywheel there is much vibration and jerkiness besides being hard on the components and clutch one often compensates with more clutch slip adding to the thing eating through clutchplates. But it is my one day expience however the flywheel manufacturer claims to provide a 1million km warranty. I’ll keep the receipt.
Another very enjoyable video, amazed at how you remember what to remove on every different car/van. Out of interest what make and type of red grease do you use?, Best of Luck in 2024. 👍👍
This is very impressive! I am changing the clutch in my E46 right now on jackstands and this is not an easy task. How Do You deal with broken transmission bolts? I broke mine, a steel bolt in the aluminum M54 engine. I am not able to remove it...
Hi kev,all the best for the new year sir,and i think i can dpeak safellly in the knowledge,that all of us subscibers REALLY APPRECIATE,VERY MUCH INDEED,ALL OF THE VERY HARD WORK AND HERCULAINUAN EFFORT YOU DOO PUTTING ALL OF THESE VIDEOS TOGETHER,GODBLESS YOU SIR AND A HUGE THANKU FROM US ALL😊😊
Kevin, your an absolute machine working in all weather and alone credit to you ..👏. Happy new year to ya Wonder if you can give me a bit of advise ? Ive a 2013 vw passat 2.0l TDI Bluemotion and when i press the clutch pedal in slightly i hear a rumble noise .. the clutch isnt slipping yet but is this the clutch release bearing ? If so, would be worth replacing the clutch plate too ? How would i know if the flywheel would need replaced Cheers Kevin Keep those video coming and stay safe 👍
I can’t help it .. I admit I’m a clutch repair addict 😁🍻🍻.. still chasing that first hit. 🔨 Thanks for mentioning that. I’ve now got a new camera and new editing software. I was hoping someone would have made a mention of there was a difference. Thanks for that ..!!🍻🍻
That is the first time I ever saw u change a rear main seal. Also did the Pugeout get a junk yard trans?? It’s been a while since I watched. Don’t get mad at me😢😢 In the old days, it was strictly clutches. Did I miss something? Thank u for your hard work!!
@@WMCS I hope you liked Kevin 🤗 it's really a pleasure for me to see your videos to see how you move while you perform all these repairs 💪🏻💪🏻💪🏻 I wish you and your family a beautiful 2024 🎉🎉🎉🎉
Not seen a rotten sill as of yet. These are manufacturers designated jacking and lifting point. So they’re really well plyed. In the olden days the side sill used to rust a lot in Ford especially
Bonjour je vous souhaites une très bonne année 2024, juste une question vos chandelles elle sont à combien de hauteur du sol pour levage du véhicule? encore merci pour votre travail qui est très intéressant. je vous regarde depuis la France.
What would happen the supplier had given you the wrong parts and you didn’t find out until you had dismantled the car? Would they compensate you for your time?
I have a nationwide account. So there’s always a shop within 30 mins drive wherever I am. I usually go straight into warehouse and grab one and back on the scene. There’s always a way to getting the job done by the grace God and man 🍻🍻😎
www.williamsmobileclutch.co.uk 🇬🇧
Submit enquiry for a price and booking date.
0:09 2014 Peugeot 207CC Active 1.6L Petrol.
33:15 2007 Skoda Fabia Ambiente 1.4L TDI Diesel.
1:00:43 2004 Renault Megane Dynamique 1.6L Petrol.
1:34:02 2012 FIAT 500 Twin Air Plus 0.9L Petrol.
These are brilliant videos with no stupid loud music this man deserves every penny he earns he his a very hard worker all on his own I wish you a very prosperous 2024 you deserve it take care
Thank you. Blessing well received
You can always tell a propper mechanic - home made tools - Bolt hammer & Sigot shaft chisel - rather than the "Hollywood Tool Box" mob - !! LOL
my reply to the tool snobs = It works doesn't it !!!
Hope you have a GREAT New Year and get some time off from the cold & wet !! 👍👍
That’s the one. The main thing is the job is getting done and car working nicely. With all the original nuts and bolts back in place.
😂😂im laughing at Hollywood tool box mob.....I'm assuming I know the brand....recently i explained to my coworkers here in Catalunya...in the Uk its quite normal for hipoteca....mortgage.....on a tool box the size of a block of flats......but almost devoid of tools inside....😂
@@marcmorris-kb9ry Yer its insane - my mate has spent OVER £100,000 on boxes & tools & coud have had the exact same unbranded tools for £2- 3000 - a lot of companys now offer lifetime G/Tee for 1/4 the price !!
My favorite vid yet with the fiat
Always great to watch these videos the man knows his stuff been a good year and hopefully see you smash more in 2024 best of luck mate 👍👍
Thank you for the well wishes. It means a lot. Likewise to your successful venture. I always drop in on your video shorts 🍻🍻🍻
@@WMCS cheers mate appericate that got some good videos coming up mate in january 👍👍 thanks again for tunning in 👍👍♻️♻️👍
I could barely handle changing my oil. And you are out here changing out clutches!!!! Hahahha love the channel. I’ll sit here and watch your videos that’s are 1 hour plus!!!
Thanks!!! I watch from Portugal
That is a hard job! Did it once on the side of a road on a FIAT Punto. Hope your earnings are superior! Happy new year.
Thank you Kevin, You didnt get any weather brea at all this week. Heavy wind and then rain. Could really feel it all the way through the bones. Worst for me was always the fingers. No matter what kind of gloves I had on, cold fingers and pain all the way down to the spine. One part of winter work in snow I dont miss.
Happy New Year to you and your family.
Regards from Sweden.
Definitively not the best season for working outside. What a courage ! All my best wishes for you and your family for the New Year.
Happy and prosperous new year 🍻🎄🍻🎄
Kevin as always appreciate your upload happy new year buddy 👍
Happy New Year Kevin!You and your family!❤
Hard work, sir....👍🥇
Auguri 🎉
on no not Greater London mind you London is supposed to be a bit warmer than any where else ,hope you have had a good Christmas and have a happy new year and thanks for all the videos over the last year
Managed to dodge all the traffic in the early morning hours .. you’re absolutely right it’s very tropical down there in the jungle 😁🍻🍻.. happy new year 🥳
One day I’ll be like KAW,, love watching these videos, who ever says black guys aren’t hard workers,, I’ll direct them to this channel, RESPECT 💯 💪👍🔧
Well thanks for the feedback. Very much appreciated. 🍻
But I’m not black. I’m not brown. Definitely not white.
I’m the 0.1% of the 8 billion population that is Grey 🥳… often referred to as the Greys that walks amongst men. 😎..
Always appreciate the support. Keep tuning in 🔧 🔨 🔩
and that is a thumbs up from me Kevin, and have a Happy new Year buddy 🎄🎉🎄🍻
Happy new year mate. All the best for 2024🥳🍻🍻🍻
Brilliant videos kev
Thanks for taking the time to post them very professional
Top job
Thanks for feedback
Legend as ever! Hope you’re keeping warm kev! All the best for 2024 🙏
Thank you. And happy new year 2024 🍻🍻🥳
I am very pleased seeing your face fully covered with the exception of the eyes while working on the Renault Megane, this was actually part of what attracted me to your channel, it simply shows a technician that appreciates the essence of ppe in discharging his automobile repair duties. Lol!
Anything that falls in the eye. Never rub it out. Wash it out.
good job bonne année 2024 un français de Strasbourg qui regarde vos videos regulierement!!
Merci Michel.. j’espere que vous aller bient a Strasbourg.. bonne Anne 🍻🍻🍻🥳🎄
Good evening Kevin, i hope you had a great Christmas, here’s to 2024 , cheers Phil
Thank you Phil. It was nice and a time for a bit of reflection have a blessed new year
Very good video like every week
Great job
Thanks for the great videos, rain,hail or shine over the year Kevin and your tips when needed. Merry Christmas and a Happy New year to you 🍺🍺
Thanks for tuning in over the year., really appreciate that and also for the feedback.
Happy new year 🥳 🎄🍻
Full sending never lifting 😏 🤙 mobbin deep 🙌 happy holidays/happy new yr to you and your family ty for the therapeutic videos from life appreciate yeah brotha 🙏
comme dab belle video merci
Salut 🍻🍻🥳
Got to pay you huge compliments and respect fella for what you do. I have done a clutch change on an old mk2 Granada back in the day while at work & on my back and never again I can tell you - but compared to today's cars you would have had it done in an hour the way you operate - no fancy electronics / plugs or sensors back then, just the bell housing clutch and cable and drive shaft to the rear. I wish you an awesome 2024 and stay safe.
Thank you for taking time to leave a review. Very much appreciated.
🍻🍻🍻🍻
Hi Kevin,
I wish u a great year 2024
Good job !!!! 🛠️
Best wishes for the new year my friend Full clutch all year round 😂😂
Happy new year mate. All the best of 2024 right at your door 🍻🍻🍻
Happy New Year Kevin to you and your family.
A very hard working man I wish I can be like you .
Wish you all the best
Thank you
Saludos bendiciones y en éste nuevo año sea excelente con mucho trabajo y salud 😊
Thank you. 🙏🏽
Nemám slova. Jsi vážně borec.
muy buen video
Just goes to show what high regard his service is held in as people from a shed load of miles away will use Kevin over someone local.
😂😂wochenbericht super neue kuplungrn 👍👍guten Rutsch ins neue Jahr 😂🎉🎉
🥇… that’s it. Thanks for tuning in. Have a great new year
Happy New year to you Kev 🎉🥂
Happy and blessed new year 🍻🍻🎄
This is Man therapy Watching 👍
This man know more then mr clutch and is quicker thean a quick fit fitter well done matey 👍👍
Very efficient hats off to you! Did my TwinAir 500 yesterday under similar conditions on the street (took me 2x2 afternoons). A few things I learned the hard way:
#1: The top bolt or the starter motor is a pain refitting, but you can just about reach it from the top reaching trough the engine bay treading the first part by hand once you got the bottom two loosely tightened.
#2 Pull back the other driveshaft (engine side) as well either by disconnecting the steeringrod and bolts to the springleg or the method shown here. I destroyed one friction plate because I could not get the gearbox on strait. So took me 2 additional afternoons (only noticed the broken plate when I had put the car back together again)
#3 Double check both drive shafts are all the way in before refilling the transmission fluid (it makes a mess).
Things not shown here for the 500 but might be good to know if one also makes the mistake of not hiring a pro: #1 Drain the transmission fluid before removing driveshafts.
#2 The refilling plug requires a uncommon H12 hex.
#3 The drain and refilling plug both like ask for Teflon/gas tape.
#4 Replace the fork also it is worth it. Break the plastic sleeves (in order to extract it (once you removed the arm). You can jam top one down with an extended socket when you pry away its edge
#5 Consider a dual mass (valeo) flywheel for this engine it greatly improves drivability and lifespan (says my one day experience driving with my one)
Things I learned from this video and wished I knew :
#1 No need to remove the entire bumper.
#2 No need to entirely remove/disconnect the starter motor.
#3 Invest in some rubbermats
#4 There are other crazies laying in the rain changing a gearbox also and some legends do it on a daily basis!
That's the only time I've ever heard anyone say " fitting a dual mass flywheel greatly improves drivability and lifespan "
@@bobgorman9481 Yeah I understand and that isn’t the case for most other engines, but a two cylinder 899cc is an other beast entirely.
Due to a narrow powerstroke compared to the entire rotation of the flywheel there is much vibration and jerkiness besides being hard on the components and clutch one often compensates with more clutch slip adding to the thing eating through clutchplates. But it is my one day expience however the flywheel manufacturer claims to provide a 1million km warranty. I’ll keep the receipt.
@@poefje Make sure you do !! Happy new year 🤗🤗
Covjek je doktor👍👍💪💪
Awlwright kev cheeky beer is it Kev 💪 🍻 💪 🍺 alright then kev good beer 🍺 💪
That’s the one. More like a dark brew kinda guy. Ale to Guinness 😎🍻🍻
Have a good new year
Mega super 👍💯💥🇵🇱ok
Thankyou
that megane 2 is starting to crumble from the rust lol looking forward for the complete repair video :p
It’s just the side plate that can be bought for a few pennies.
Highly recommended
🥳👍🇸🇪
Gott Nytt ÅR!
Happy new year 2024. 🍻🥳🍻
Another very enjoyable video, amazed at how you remember what to remove on every different car/van. Out of interest what make and type of red grease do you use?, Best of Luck in 2024. 👍👍
It’s anti oxidisation red rubber grease.
This is very impressive! I am changing the clutch in my E46 right now on jackstands and this is not an easy task. How Do You deal with broken transmission bolts? I broke mine, a steel bolt in the aluminum M54 engine. I am not able to remove it...
Hi kev,all the best for the new year sir,and i think i can dpeak safellly in the knowledge,that all of us subscibers REALLY APPRECIATE,VERY MUCH INDEED,ALL OF THE VERY HARD WORK AND HERCULAINUAN EFFORT YOU DOO PUTTING ALL OF THESE VIDEOS TOGETHER,GODBLESS YOU SIR AND A HUGE THANKU FROM US ALL😊😊
Thank you very much for such kind messages.
It really means a lot. Really appreciate the support and words of encouragement.
H A P P Y N E W Y E A R
🍺
che dire su questo fenomeno ... good
He has found a good niece market all mech don't like to change the clutch plate at All hase The job down to beging a simple procedure
Kevin, your an absolute machine working in all weather and alone credit to you ..👏. Happy new year to ya
Wonder if you can give me a bit of advise ? Ive a 2013 vw passat 2.0l TDI Bluemotion and when i press the clutch pedal in slightly i hear a rumble noise .. the clutch isnt slipping yet but is this the clutch release bearing ?
If so, would be worth replacing the clutch plate too ? How would i know if the flywheel would need replaced
Cheers Kevin
Keep those video coming and stay safe 👍
Sounds like the DMF is on its way out.
@@WMCS Ah man that sounds expensive 😭😭
one hour ago ?? I thought you might be sat in front of the fire with your feet up enjoying Christmas 😊very good lighting and definition in the videos
I can’t help it .. I admit I’m a clutch repair addict 😁🍻🍻.. still chasing that first hit. 🔨
Thanks for mentioning that. I’ve now got a new camera and new editing software. I was hoping someone would have made a mention of there was a difference.
Thanks for that ..!!🍻🍻
That is the first time I ever saw u change a rear main seal. Also did the Pugeout get a junk yard trans?? It’s been a while since I watched. Don’t get mad at me😢😢 In the old days, it was strictly clutches. Did I miss something? Thank u for your hard work!!
what camera and software, interested, 😊
Super Kevin 💪🏻💪🏻💪🏻💪🏻💪🏻
Was just watching your channel earlier today
@@WMCS I hope you liked Kevin 🤗 it's really a pleasure for me to see your videos to see how you move while you perform all these repairs 💪🏻💪🏻💪🏻 I wish you and your family a beautiful 2024 🎉🎉🎉🎉
This ist Great britain. How do you deal with the weather?
Still watchin mr. Lewis Hamilton doing some proper clutch jobs:D
Or maybe I need to see eyedoctor afterall…
😎😆🍻
Did he ever did a fiat tipo?
Do you ever find the sills too rotten to place stands under?
Not seen a rotten sill as of yet. These are manufacturers designated jacking and lifting point. So they’re really well plyed. In the olden days the side sill used to rust a lot in Ford especially
Bonjour je vous souhaites une très bonne année 2024, juste une question vos chandelles elle sont à combien de hauteur du sol pour levage du véhicule? encore merci pour votre travail qui est très intéressant. je vous regarde depuis la France.
About knee high. 🍻
What is the average cost of work excluding spare parts?
Send your enquiry via the link for a price.
What would happen the supplier had given you the wrong parts and you didn’t find out until you had dismantled the car?
Would they compensate you for your time?
I have a nationwide account. So there’s always a shop within 30 mins drive wherever I am. I usually go straight into warehouse and grab one and back on the scene. There’s always a way to getting the job done by the grace God and man 🍻🍻😎
I think that as a protest against ULEZ you should refuse to go into London.
What's the furthest u have driven to do a clutch kev?
Furthest down south I’ve gone is Margate 😁😆… it was a different planet altogether
How many clutch do you do in a day . As .
Same as an apple. 🍎.. just to keep the doctors away. 🍻
Price?
Same as a piece of string
you should add some music to yours videos
Pffff 💨
NOn si può lavorare in quel modo....
Are you some kind of TH-cam police or something.
Happy New Year in advance amigo,keep up the good videos.From Canada.
Stevan .. thankyou and blessed one for you also 🥳🥳🍻🎄