Dyson DC59 Floor attachment motor repair
ฝัง
- เผยแพร่เมื่อ 8 เม.ย. 2017
- Dyson Cordless Vacuums turn off and on by itself. This can be a filter or hair on the roller. When it's not there is most likely hair binding the floor attachment motor. Here is how to fix it without the cost of replacing the attachment
- ยานยนต์และพาหนะ
The wife is officially off my case. Your sir, are a legend. Cheers
I own a DC62 that had the same problem!
The incident has now been resolved.
Excellent tutorial ! 👍
The best video out on youtube for cleaning the DC9 head. All of the others are crap. It's amazing how DriveMaster figured this out!
This was extremely helpful! SHORTCUT: skip unscrewing all of the housing screw and only use the T-8 to unscrew the spiral bladed connector.
Most of the time the spiral blade is on really hard and difficult to remove if you don't take the rest of this apart. After doing this a few times you might be able to take the shortcut.
Fantastic tutorial. I was just on the verge of buying a new Motörhead when I spotted your video. I had tried everything previously but the spindle was stuck fast. As soon as I added the oil and turned the brush spindle to spread the lubricant it freed up! Thanks so much.
I have watched this video (and now fixed my Dyson) numerous times. This is a gem!!! Thank you so much!!!
Worked like a dream. The last fitting was very stiff but finally came off with the right leverage and found what seemed like metres of hair! It runs like a new cleaner now and replacement heads are pricey. Thank you.
Stopped me having to buy a new one, thanks so much! Quality easy to follow instructions
I already spoke to the Dyson people in Australia and was about to order a new motor head when I came across your video. I did everything you said and now, it works perfectly again. Thank you kindly!
You are a star! This had been bugging me for ages and I was about to take the machine to the repair centre. You've now saved me the time and money so thank you! I'm now back in love with my Dyson again.
You, sir, are a total legend. Fed up of this infernal machine working intermittently. Followed your instructions and cleaned out the motorhead as per your instructions. It now works flawlessly! Thanks!
You Sir, are a treasure! Thank you so much. I finally found a T8 narrow enough to get into that Technician's screw hole up the motor end (y'know, the one designed to make it hard for ordinary people to undo so you have to take it in for an expensive service) and your video made the rest soooooo much easier! Bless you!
Exactly the demo we needed, that spindle was so tightly wound with hair it was amazing the head rotated as long as it did.
Thanks!
In my case, the motor was broken.
Your video helped to disassemble the brush, replace the motor and reassemble everything back!
Glade I was able to help.
THANK YOU!!’ Fixed my dyson. Had been driving me mad for ages and didn’t want to spend all that money on repairs or replacement. Bought a torx 8 for £5 on Amazon and hey presto!
So glad I was able to help and save you the cost of a new head. I get a lot of thanks from all around the world.
Thank you so much. Couldn't believe how much hair was in there. Never would have known to remove without this video. It's back together and working perfectly.
Thank you for an EXCELLENT video describing everything very clearly and at the right pace. I cannot bear the throw away society we have made and love to fix things. Once again a huge thank you for your very helpful video. Keep up the great work. Steve
Thank you so much. Saved me money and taught me something I didn't know before. Appreciate that the spindle could have been removed after removing the brush but that wouldn't have given me the opportunity to remove all the dust and hair that had accumulated in the other parts of the head and particularly around the motor so your method is a much more thorough fix. Thanks again.
Great video, can't believe the amount of hair that gets stuck there. Would not of had a clue how to fix my dyson without this video.
Thank you.
Thank you. This helped fix my v6. I started taking all the casing off too and got stuck with the wires in the motor. Then i just yanked out the spindle and managed to clean out the hair without disconnecting the motor. Very satisfying thanks again
Great job, thank you. I had tried to fix it myself, but got ‘stuck’ with the hidden screw in the spindle drive. then I found your video and managed to get a ‘watchmakers’ screwdriver to remove it. Success, all thanks to your instructions. Much appreciated.
This video was brilliant! Thank you 😊
Couldn't believe the hair that got into the mechanism and stopped the brush bar from working and now it's all fixed and good as new after following the steps in your video!
I have had to do this twice now and with 4 cats I'm sure it won't be the last time. I could see others like you who would be in the same boat. Those brush head accessories are expensive and this is a 15-20 minute fix.
@@DrivelineMaster We've got a cat but most of the hair I found was my daughter's! She didn't have a haircut until she was 14.
Thanks so, so much for making this video. You just saved me AUD$115 which is the local price of a new motorhead less the price of a new torx screwdriver I needed to buy. You explained everything really well and the camera work showed me everything I needed to see. Keep up the great work.
I had got to the very last part and did not feel confident that the part could be just pulled off, so many thanks for the vid showing it could. My vacuum is now as good as new.
Brilliant, I had given up and thought I would google one last time, nearly bought a new part $125 .. followed your instructions and it worked, Wife was very impressed... thanks
I'm glad I could save you some money. I have had to do this several time and I often have to refer back to my original video to refresh my memory.
Thank you so much for this. I had given up on my Dyson DC62, which is identical, but followed your instructions and it's now working perfectly. My husband is very impressed. Lea (Switzerland) BTW I managed to do it without disconnecting the wires to the motor.
Very many thanks for this in depth strip down. I was a little stuck on getting the top cover off after taking out all the screws. I guessed there was a catch of some sort so it was great to see it in person so I could then see how to release it.
Cheers.
Wish I had watched this before trying to figure it out myself. Got all the way to the mechanism clogged with hair and couldn’t figure out how to get it apart. Watched this and BAM! Easy as pie. Thank you for saving me $200 on a new motorhead. 🤗🤗🤗🤗🤗
Thank you! Made it to that last screw, you saved me hours of pulling hair out of the bearing!
Thanks! I’ve watched a lot of videos on how to fix my Dyson with intermittent roller brush spinning, but your video is the one that fixed it. Can’t believe how much hair had accumulated around the bearings! Using a fine picking tool was essential for cleaning it out. Thanks again!
Absolutely. Glad you were able to get it fixed. Works every time.
I thought I cleaned mine thoroughly, but it continued to not spin. After seeing this video, I realized I didn't remove the drive gear, which was the problem. Thanks, dude! You just saved me from spending $140 on a new powerhead!!!
As a last resort before buying a new attachment, my wife found your video and its sorted! Lots of hair everywhere! Works and treat and saved us £50!
Fantastic. Glad it worked.
That's fantastic video. You have saved my ... I think Dyson is, if not, should be ashamed of what they sent to us. A cleaner has to be cleaned so badly! I am going to my table. Thanks a million for the tutorial!
Thank you so much for posting this detailed video. It was super helpful and I was able to fix my V6. Thanks for posting the details of the tools. I did find so much hair at the end of that final step. Just like you predicted!! This saved me bunch of money!! I can’t thank you enough.
Thank you so much for your tutorial. It gave me the confidence to tackle this project. Excellent investment in a T8! I have to admit I did follow Scott’s advice and did not take the cover off. It worked! Yay! Thank you so much!
Massive thanks mate, I have 2 DC59's and was down to one small motorised head from the accessory kit. One torx 8 screwdriver later and both large heads are working perfectly. My only regret is that I couldn't take you up to 1000 subs.
Brilliant thanks. Very clear instructions and good camera work. Well done, appreciate.
Brillant, thanks for taking the time! Very useful, now I am confident enough to do this.
You are a gentleman and a scholar. It's always the little details. Thank you!
Wow ours is now working yippee ! Couldn’t get the part that spins around to turn. Removed the last screw and low and behold it was jammed with little hairs. Removed now and hoover working again. Saved me £30 as that was what Dyson wanted to send a new part.
Thanks so much for your advice 😀
I'm so happy this video has helped so many people around the world. I get a lot of comments from the UK and all over.
Tried everything and this was meant to be the last straw. Almost gave up when couldn't find size 8 to take screw out. Followed instructions exactly and it worked! Saved me a lot of money! Yippee!!
Nice clear instructions to get me to the root of the problem, which was hair trapped in the spindle in the motor section. I had to use pliers to remove the spindle mechanism as it wouldn't budge by just trying to pull. I'm sure next time I'll be able to do this task three times quicker! Thanks.
Glad it worked out for you. Yes, the spindle is on really hard. What is nice to know is that pulling really hard on it won't break it.
This was so informative. We managed to remove the offending part (nervously, carefully and sighed with relief when it didn't break). The amount of hair coiled up inside was an amazing amount. This video saved us $140.00 nz.
A massive thank you,followed your video, now everything's working great.
This solved the problem. Lots of hair in the roller spindle. After I removed the spindle with the pliers I saw the issue. Thank you.
Brilliant video thanks, hardest bit was getting the T8 wrench. Well described and bang on the money. Great work.
Thanks heaps, this was driving me nuts. Your video was the extra bit I needed to fix this issue
Thank you so much for your video! Saved my behind on a new hoover head. Much appreciated Matt UK
Thanks man! Exactly what I was looking for … could not get the top cover off because I did not know about the clip. Plus the great tip to get a second HEPA-Filter to cover the drying time - why did I not think of that? This video made my day!
Thank you!! Saved me $80 from having to buy a new motorhead. Glad to have my vacuum back in working order!!
Thank you so much for uploading this! Saved me £60 off Dyson or £40 off Amazon !
Thank you for this informative and cost saving video.
Keep up the good work!
I'm amazed - it worked, and I am by far mechanically minded but you did a great job and I've fixed my brush head! Thanks so much :)
Thank you so much for this video. Just had to carry out this task and I wouldn’t have had a clue if I hadn’t seen your video. Regards, from England :)
Thanks to your video, I have been able to clean the rotor. Thank you very much!
Now this is what we needed to see! Fantastic video sir!
Hallelujah it worked!!! But only when I also added the lubricant. Thank you soooooo much!!!!
Thanks! Was just missing that little clip to remove that top plate. Much appreciated
Thanks so much! I called Dyson, paid $25, and waited 3 weeks for a replacement brush bar that didn't work. I called them back and they told me I had to pay $200 + tax and shipping to replace the head...no thanks. This fixed it!
Yep, just got off the phone with them myself. Their trouble shooting consisted of checking the tube for obstructions... Then recommended me to send it in
A big thanks man, working to perfection
Great information. Exactly what I was looking for. With all necessary tips and tricks. Thank you..
Ill definitely perform the same cleaning.
Geezer! Cheers - this was the only thing i hadn't done. Now fixed................Merry Xmas.
Performed all the troubleshooting that dyson.com had. Called the support line since that didn't help. They said "oh, your motor is going out. You'll have to buy a new one."
"How much is that? And can I get a discount?"
"Sure, 20% off comes to $160."
Can't believe they want $200 for a new head. This video saved me.
(Side note: if this doesn't work, search DC59 compatible motorhead. Found some off-brand ones for $25 on Amazon. Better than spending $160 or just buying a whole new Dyson)
Thank you for the video. I did this but I also had to remove the black cover for the bearings under which there was even more hair stopping it working. Once I removed this and lubricated the bearings I put it back together, put the unit directly on the vacuum gave it some gentle persuasion which holding down the trigger and voila, it now spins like a jet engine.
Thanks for making this. Didn't fix my problem but glad it helped others. This will be the last Dyson I ever buy... won't work after 2 months of infrequent use.
Sorry it didn't fix your problem. Other things that can cause the stop and start are plugged up filters. Make sure to wash out the heppa filter as well as the one in the main storage tank.
Great video. Lockdown hoover fix success... could have gone either way but took the plunge, went to buy a torx screwdriver (didn’t know what that was before...) and horrified what my hair can do... no pet to blame! Couldn’t pull out the wires but managed regardless. Thank you!!!
I had this exact issue and it solved my problem of an intermittent power head. Thanks!!!
Thank you x 125 .....fixed via your excellent instructions .....Dyson was going to charge me $125 for new head 👍👍👍👍👍
This is the video that I've been looking for. Thanks
Great video,as said below with the right tool a 5 min job without taking the whole head apart. Thank you
Great video, helped me get ours working perfectly.
Thanks man.
Awesome! Followed it step by step and it solved the problem. Hooray! Thank you!
Thanks so much for this! I've just saved £60 on a replacement, and it's working better than it has in years.
I'm really happy to help and glad this worked out for you.
This helped me fix my dyson!! Thank you so much for this video!
Awesome video mate, exactly what i needed to fix it. Thank you
This was so helpful and I fixed it myself! Thank you!
Excellent video. Easy to follow and the exact remedy to my fault. Many thanks.
This gets my vote for the very best DIY video to fix a roller brush that won't turn! 100 stars! (I'm a girl and I fixed my vacuum! woot!) :)
Good for you Sharon. I'm glad I could help.
Thank you for this life saving video. I have one happy missus which gets me a few days good grace. 😀
Perfect! Also worked for my Dyson SV03. Thanks!!!
Great information, much appreciated. I wanted to go a step further and remove the spindle from its casing. I believe it's held in using a circlip. Don't really want to break anything. Found lots of hair, cleaned out, now working!
Excellent, Glad to hear.
Thanks for this excellent demonstration. It was really helpful.
I concur with Paul. It worked!! This is off my honey do list and I can sit down.
Hi thank you very much for your informative video - I had not noticed tthe Torx 8 screw holding the brush drive.
I followed your instructions and took apart and cleaned - I found that a lot of hair and dust had got into main brush drive bearing and it was very rough when turned.
Having in a past life serviced power tools - I decided to remove the circlip (was very tight) but drilled a couple of small holes to the outside of the clip to enable a screw driver to get in there & lever the circlip off - be careful and hold so doesnt fly off - wear glasses.
I tapped out the bearing - the outside of which has a rubber/plastic seal.
I removed the rubber seal with a jewelers screwdriver and sprayed wd40 into the bearing and picked/washed out the hair. When clean and smooth to turn I then regreased the bearing and refitted - this time with the rubber seal to the inside to better prevent entry of the hair etc. into the bearing.
All back together and working well.
Cheers Kim
Good to know Kim. Very ingenious. More work than most home fixers would be able to do.
Iv finally found a video that is actually helpful, thanks a bunch!
Great video! Just saved me a new motor head. Thank you.
Thank you for so much detail, worked perfect!
Thanks! That was precisely the problem, and now all fixed.
I just want to say thank you for posting this video clip.
Great video! Lubricating is crucial after cleaning.
Outstanding video - thanks for the walk through!
Brilliant instructional video, it's earn't me some brownie points for getting the Dyson working properly again. Wife and daughter both have long hair, clean the roller regularly, but couldn't believe how much got wound onto the spindle behind the drive spigot. Many thanks :)
Thank you, awesome video. Exactly what we needed!!
This was a very satisfying fix thank you for posting! I was convinced it was something else as I ran the brush head motor without the belt attached and it ran but then stopped much like it did when fully assembled.I guess the brush head motor needs a load to behave properly ??? Thank you sir 👍
Thank you so much for this extremely helpful video! 👍🏻👍🏻
Fixed my vacuum... Many thanks .. great video.
Saved me after dyson tech support said buy a new vacuum with 20% discount. Thank you
Excellent video. I could have done it the quick way by putting a #8 Torx but would have missed a whole lot of hair clogging up other areas. So, in my case, I got a better job by dismantling the head unit as recommended in the video.
Great video! Fixed my problem. Thanks for sharing!
You litterally save my life 🙏🏼
Thank you for this excellent tutorial! I first used a german video but that one did not mention that the part at the motor has a screw inside and there was the real problem with a hair curl around the motor. After removing it I have added a bit of "men's deodorant" WD-40 and it all freed up instantly.
Glad you found this helpful. Those darn hidden screws make all the difference.