Thanks for the video Daniel., I’m learning new things with you ., so., if I use the bus out 1-6 for a 3 way crossover, I only have bus 7 to 12 For floor monitors right.? And one more question., bus out 1-2 will go to low’ amp, 3-4 to mids amp… 5-6 to highs amp., stereo mode .. it’s this correct .? Thank you so much 👍
@samd5005 you will use matrix 1-6 not the busses You send the main LR to the matrices and you still have all your busses available for monitors And yes matrix 1-2 goes to the low amp 3-4 to the mid and 5-6 to the high
@@danielkharrat I’m little confused., I have the Midas m32c ( the rack version) and the Midas dl 32 stage box…and I don’t see a matrix output in the dl32… just the 32 channels, and the 16 bus out So, whet this matrix output are 🫣🫣 Sorry 😅 or I only can do this with the big m32 console, but not with the m32c.. please explain Thanks 🙏
@samd5005 it's the same with the big console also you only have 16 xlr outputs You are confusing outputs with busses By default the 16 xlr outputs are assigned to the first 14 busses and the left right In the OUT page you can assign outputs 11-16 to matrix 1-6 And you will have xlr 1-10 for busses or something else So yes you will be using 6 of the total 16 xlr for that matrix setup but you're not losing busses You can still use the busses 11-16 for mixing or if you use another stagebox you can have physical outputs for them
Is it possible to EQ matrix 1 and 2 individually when in a stereo pair? or some sort of work around other than using inserts? For instance if i need to EQ my left speaker differently to my right speaker
You'll have to unlink them or go into setup menu and turn off EQ in the link preferences But if you do that it applies to the entire console so just unlink them
@gershondharmanandan9902 you're right. I haven't thought about it before but that's a big flaw that the link preferences can only be changed globally. I guess you only solution is to insert a Dual TruEQ if you want something that behaves like a normal parametric eq because the GEQ creates all kinds of problems if you decide to boost frequencies
@@danielkharrat yeah I'll probably have to just give in and use an insert if I really need it. I plan to use it for tuning the system using smarrt/OpenSoundMeter, so hopefully the right side won't be too different to the left and I can just use the default parametric on both. If I really need to adjust the other side more then I'll end up using an insert (either truEQ or the blue one with knobs, I forget it's name lol). Do I have to worry about the delay caused by an insert? Or is it so small that in a room it doesn't really matter in this case?
@gershondharmanandan9902 the delay of the effects on the m32 is roughly around 1 millisecond so no you won't notice any delay, however you have to insert it on both the Left and Right even if you only want to use it on 1 side If you use the pultec eq there's a "IN" button that allows you to bypass the effect without removing it from the signal chain So you can bypass side A and work with side B but keep the insert button turn on for both the left and right matrix
Depends on your preference, do you want to focus on the mix as a whole and let the console send each part of it to the correct speaker or do you want to decide what goes to the sub and what doesn't
@@danielkharrat Other than "let the the console send each part to correct speaker", what other benefits are there for using matrices for PA? One benefit may be you can gain headroom for PA (matrix headroom + LR headroom)?
@@anchoravsystems8598 Matrices give you an extra EQ, and for the low and high bands you have modes with steeper Qs (which Daniel didn't show in his video for some reason) that are handy for handling crossover frequencies.
I already made a video about talkback th-cam.com/video/pQ2DJpHyBrw/w-d-xo.html And if the band needs to talk to you, you can use a mic into a channel normally but you would turn off the main stereo button on that channel so it doesn't go to the main mix
![[UNCUT]“ฅนตื่นธรรม”ปะทะ“หมอปลา-ปู่มหามุนี-อั๋นโอกิ”สะเทือนกระทรวงเวทมนตร์ Iคนดังนั่งเคลียร์I10 ตค.67](http://i.ytimg.com/vi/peMD_SAkwNc/mqdefault.jpg)
Thanks for the video Daniel., I’m learning new things with you ., so., if I use the bus out 1-6 for a 3 way crossover, I only have bus 7 to 12 For floor monitors right.?
And one more question., bus out 1-2 will go to low’ amp, 3-4 to mids amp… 5-6 to highs amp., stereo mode .. it’s this correct .?
Thank you so much 👍
@samd5005 you will use matrix 1-6 not the busses
You send the main LR to the matrices and you still have all your busses available for monitors
And yes matrix 1-2 goes to the low amp 3-4 to the mid and 5-6 to the high
@@danielkharrat I’m little confused., I have the Midas m32c ( the rack version) and the Midas dl 32 stage box…and I don’t see a matrix output in the dl32… just the 32 channels, and the 16 bus out
So, whet this matrix output are 🫣🫣
Sorry 😅 or I only can do this with the big m32 console, but not with the m32c.. please explain
Thanks 🙏
@samd5005 it's the same with the big console also you only have 16 xlr outputs
You are confusing outputs with busses
By default the 16 xlr outputs are assigned to the first 14 busses and the left right
In the OUT page you can assign outputs 11-16 to matrix 1-6
And you will have xlr 1-10 for busses or something else
So yes you will be using 6 of the total 16 xlr for that matrix setup but you're not losing busses
You can still use the busses 11-16 for mixing or if you use another stagebox you can have physical outputs for them
@@danielkharrat thanks for your time..
Awesome sound engineer 💯
Is it possible to EQ matrix 1 and 2 individually when in a stereo pair? or some sort of work around other than using inserts? For instance if i need to EQ my left speaker differently to my right speaker
You'll have to unlink them or go into setup menu and turn off EQ in the link preferences
But if you do that it applies to the entire console so just unlink them
@@danielkharrat but then will it be summed to mono in each one? Is there a way to send Main L or Main R only to a matrix?
@gershondharmanandan9902 you're right. I haven't thought about it before but that's a big flaw that the link preferences can only be changed globally. I guess you only solution is to insert a Dual TruEQ if you want something that behaves like a normal parametric eq because the GEQ creates all kinds of problems if you decide to boost frequencies
@@danielkharrat yeah I'll probably have to just give in and use an insert if I really need it. I plan to use it for tuning the system using smarrt/OpenSoundMeter, so hopefully the right side won't be too different to the left and I can just use the default parametric on both. If I really need to adjust the other side more then I'll end up using an insert (either truEQ or the blue one with knobs, I forget it's name lol). Do I have to worry about the delay caused by an insert? Or is it so small that in a room it doesn't really matter in this case?
@gershondharmanandan9902 the delay of the effects on the m32 is roughly around 1 millisecond so no you won't notice any delay, however you have to insert it on both the Left and Right even if you only want to use it on 1 side
If you use the pultec eq there's a "IN" button that allows you to bypass the effect without removing it from the signal chain
So you can bypass side A and work with side B but keep the insert button turn on for both the left and right matrix
If the setup is LR and Sub, should we be setting up Sub sends and PA crossover via Matrix or M/C?
Depends on your preference, do you want to focus on the mix as a whole and let the console send each part of it to the correct speaker or do you want to decide what goes to the sub and what doesn't
@@danielkharrat Other than "let the the console send each part to correct speaker", what other benefits are there for using matrices for PA? One benefit may be you can gain headroom for PA (matrix headroom + LR headroom)?
@@anchoravsystems8598 Matrices give you an extra EQ, and for the low and high bands you have modes with steeper Qs (which Daniel didn't show in his video for some reason) that are handy for handling crossover frequencies.
Thanks for your video.How can i eq my matrix I set up delay speakers with matrix but can't control with eq.
With the same eq you use for the cross over
@@danielkharrat thank you but I wanted to use eq just for to release feedback for my matrix but it didn't react
@@vaqiftahmazov6359 you can use a graphic eq and insert it on the matrix
@@danielkharrat I did but again didn't work.The matrix worked but with eq didn't react
@Vaqif Tahmazov if it didn't react then it's off. Make sure it's active
Can you make a video on how to set a talk for the band and the engineer only
I already made a video about talkback th-cam.com/video/pQ2DJpHyBrw/w-d-xo.html
And if the band needs to talk to you, you can use a mic into a channel normally but you would turn off the main stereo button on that channel so it doesn't go to the main mix
Inspiring
Why do you not use the Built-in crossovers in the console, as opposed to the high and low cut ?
👍👍👍👍👍💙💙👍👍💙
04:10 here i wouldn't say "output 1 goes to matrix 1", but "ouput 1 is fed by matrix 1" :)