Folks, you are damn fortunate to have Joe Pie as a fan. You really tweaked his interest. He told me to be prepared to smile. New Subscriber to a great channel . Wakodahatchee Chris🥰😋🖐🖖👌👍
What a nice example of this engine. I have the non reversing version and it easily drove a propeller twice that diameter, in the water and pushing a 1 metre long scale model of the steam tug, Cervia. Nice to see my sticker up on the wall too. Thanks.
Hello from "The Colonies" (Canada eh?) Wowsers! I could watch that little engine all day long... but it is the sound of it which is especially appealing to my existence! Thank you so very much for sharing!
i subscribed because Joe Pie said, and we always do what Joe Pie sez. More seriously, anyone who can 'do' an engine like that is likely to enjoy 'Clickspring'. i suggested it to Joe; don't know if he ever got time. Thanks for sharing.
Joe, you have made my day....most of what I have learned (I'm not formally trained as an engineer) is from guys like you, and you are certainly a top teacher ...all the best from a cousin across the pond. ;))
Beautiful work and a nice set up with the boiler. Joe Pie said I should check out your channel. I'm glad I did. It was a great recommendation. I subbed! 👍😃
Hi there Great little engine with many hours spent building i suspect👍👍👍👍 Bumped in to you from Rusty's channel. so sub'd and bell'd you and will take a look at what you get up to, regards Kev
It would be nice with some cladding on and a bit of ornamental brass banding to match your economiser, It's a bit of a faff to fit especially round the exhaust ports and the drain cock's but it's worth it. Have a look online and see what others have done, it may make up your mind.
have a look how others have done it, Keith has done a few bits on it. cardboard, a strip of cloth and super glue are your friends@@modelengineeringadventures
Folks, you are damn fortunate to have Joe Pie as a fan. You really tweaked his interest. He told me to be prepared to smile. New Subscriber to a great channel .
Wakodahatchee Chris🥰😋🖐🖖👌👍
Thank you so much for you watching, lovely comment and thank you for subscribing 🌞
Joe Pie mentioned your channel. Glad he did. I subscribed.
Thank you for watching/ subscribing 😊
Joe Pie said it was a must see site.
Thank you for watching 😊
What a nice example of this engine. I have the non reversing version and it easily drove a propeller twice that diameter, in the water and pushing a 1 metre long scale model of the steam tug, Cervia. Nice to see my sticker up on the wall too. Thanks.
Thanks Mark its been a 4 month journey but the end result is great...looking forward to your detailed build.
Joe Pie sent me here, looking good!
Thank you for watching and subscribing 😊
(Knocks on door) “Joe sent me!”
Thank you for watching 😊
She is a beauty, and the wooden base sets her off a treat! I'm with John, I'd love to see some build videos too.
Thank you Mark for watching. On his case for longer build videos 😊
ok will have a look at the next build
Joe Pie recommended your channel nice boiler and stuart
Thank you 😊
Thank you for showing us the engine and the rest. The spontaneous enthusiasm is great..
Just watched my first video of yours. I enjoyed it. I will watch more as I subscribed to it. Joe Pie turned me on to this channel.
Thank you for watching and subscribing 😊
Hello from "The Colonies" (Canada eh?) Wowsers! I could watch that little engine all day long... but it is the sound of it which is especially appealing to my existence! Thank you so very much for sharing!
Thank you very much
Something I know little about is Steam. It's amazing to watch all those mechanical parts moving. Well done.
Steve.
cheers Steve
Thank You
Thank you 😊
i subscribed because Joe Pie said, and we always do what Joe Pie sez. More seriously, anyone who can 'do' an engine like that is likely to enjoy 'Clickspring'. i suggested it to Joe; don't know if he ever got time. Thanks for sharing.
Thank you so much. We have watched clickspring and he is another brilliant channel like Joe’s to learn from 😁
Nice model. Very similar to the D10 twin. Subbed too. :)
Joe, you have made my day....most of what I have learned (I'm not formally trained as an engineer) is from guys like you, and you are certainly a top teacher ...all the best from a cousin across the pond. ;))
@@modelengineeringadventures Thank you sir.
Beautiful work and a nice set up with the boiler. Joe Pie said I should check out your channel. I'm glad I did. It was a great recommendation. I subbed! 👍😃
Yeah, ditto.. 👍
Thank you for watching and subscribing 😊
Very nice engine and boiler! Thanks for sharing it.
Very very nice engine!! Beautifully made 👏 👏 🔧
Would REALLY like to see longer build videos please.
hi John i will work on that for you
Thank you for watching John, on his case for longer build videos 😊
More volume please
New subscriber compliments of Joe Pie 😉 !
Thank you 😊
Great tour, lovely engine and set up, thanks.
Joepie221 sent me. Subscribed.
Thank you for watching and subscribing 😊
Very nice little engine 👌
@MrFactotum sent me. Always nice to find another UK channel. Keep up the good work 👍 🇬🇧
Thank you for watching, good to know their is a community out there 😊
Hi there
Great little engine with many hours spent building i suspect👍👍👍👍
Bumped in to you from Rusty's channel. so sub'd and bell'd you and will take a look at what you get up to,
regards
Kev
Hello Guy's,
That is a really cool engine... I like how you're using the and independent boiler to run it.
Take care.
Paul,,
Thanks paul difficult build but worth it
Thank you for taking the time to watch Paul 😊
Excellent job, runs brilliantly.
That is wonderful 👍
Thank you I'm very pleased with it
Joe Pie recommended you
Thank you watching 😊
Nice setup
Wonderful set up, Thanks for sharing. Is the Economizer from a kit and what company or did you scrath build it?
Keith appleton has a video on how to build one
Thank you for the info and quick reply.@@modelengineeringadventures
❤❤👍👍👌👌💪💪 trop bien.
Thank you for watching 🥰
love the mounting. Are you going to clad the cylinder?
it runs so well and i like it the raw the way it is...what do you think?
It would be nice with some cladding on and a bit of ornamental brass banding to match your economiser, It's a bit of a faff to fit especially round the exhaust ports and the drain cock's but it's worth it. Have a look online and see what others have done, it may make up your mind.
ok i will have a go...
have a look how others have done it, Keith has done a few bits on it. cardboard, a strip of cloth and super glue are your friends@@modelengineeringadventures
@@paulrayner4514 i will put it on the to do list
nice, sounds like a sewing machine.
that's a lovely thing to post and makes all the work worthwhile
Joe pie ❤❤❤❤ t h a n k y o u
Thank you for watching 😊
@@michelledaviesart we are waiting for tutorial content thank you
we will do some more videos on making our model but i am not a teacher, we have joe pie for that