Happy to help you through this! Hopefully this video will help others through this issue and make it known that this CAN bus wiring is a necessary part of a ME7 manual swap.
Hi Alex! Truly appreciate the support and our Volvo community! I would still be struggling with the wiring had I not had your help my friend! Thanks for watching!
While you wait, look a pins on the throttle body and compared the pin outs to the automatic hardness. You can also verify that the pins are the same on the ECU. Nice video
I will H! I believe the wiring is good, though, as I ran the VIDA test on it and it worked. It just doesn’t want to play with the original ecu and the five codes all refer to check the software…
Great info Dan. Thank you for sharing this with us! Did you try using the original throttle body after resolving the wiring issue? Or was it just bad luck that the original body broke during the swap?
I gave the original working etm to my friend who has an 00v70xc. His went bad. I had the 00c70 etm with a Sacer mod in it, known working, so I thought I’d help my friend. A few weeks later while I was figuring out the can bus issue, that etm failed him, so I thought that the c70 etm wasn’t working in the laser so I ordered the eBay unit and gave c70 unit to him to try. It worked fine so I told him to keep it…ill timing and lack of knowledge and now it’s clear what I should’ve done, lol! Thanks for a great question and for watching!
Happy to help you through this! Hopefully this video will help others through this issue and make it known that this CAN bus wiring is a necessary part of a ME7 manual swap.
Hi Alex!
Truly appreciate the support and our Volvo community! I would still be struggling with the wiring had I not had your help my friend! Thanks for watching!
@@handydand You're very welcome!
Dan I love you content and especially your choice in cars
Thank you Terry!
While you wait, look a pins on the throttle body and compared the pin outs to the automatic hardness. You can also verify that the pins are the same on the ECU. Nice video
I will H! I believe the wiring is good, though, as I ran the VIDA test on it and it worked. It just doesn’t want to play with the original ecu and the five codes all refer to check the software…
@@handydand Sounds like you done everything, hope the dealer come through
Great info Dan. Thank you for sharing this with us! Did you try using the original throttle body after resolving the wiring issue? Or was it just bad luck that the original body broke during the swap?
I gave the original working etm to my friend who has an 00v70xc. His went bad. I had the 00c70 etm with a Sacer mod in it, known working, so I thought I’d help my friend. A few weeks later while I was figuring out the can bus issue, that etm failed him, so I thought that the c70 etm wasn’t working in the laser so I ordered the eBay unit and gave c70 unit to him to try. It worked fine so I told him to keep it…ill timing and lack of knowledge and now it’s clear what I should’ve done, lol! Thanks for a great question and for watching!
@@handydand Can you borrowed it as trial on your car