Check out Judo Grid's Modular Display System at: tinyurl.com/32jncska and display your Miniatures and Collectibles the way they deserve to be displayed!
I was about to ask the same question. Looks like it’s a lot easier to use than green stuff (although, I’m under no illusions that I’d be anywhere near as good with it as Trovarion).
@@trovarion How does it compare to greenstuff mixed with various amounts of milliput? Anything it can do better that the mix can't? Awesome work of course!
The model position/compositon really showcases how keen your sculptor's eye is. Keeping the eagle at an angle frames the models face from the front, ties together the lines from the other perspectives in a fluid way, and above all heightens a sense of movement: the model strides forward launching the eagle while extending the other arm+hammer behind it. The model is truly dynamic (not off-balance). Bravo!
I have never seen a miniature refresh fall so universally flat. Literally everyone is dunking on our boy Coteaz. Really makes me wonder who the hell is grenelighting this stuff?
It's very bizarre. If it was just a question of taste then it would make sense but the design doesn't even really look like the previous model or artwork apart from in the broad concepts.
Yeah so many of the new 40k models just look so awkwardly posed and bulky. Almost like they're action figures instead of statues. But aos is out there with absolutely stunning sculpts again and again and again.
The combo between the lack of creativity and personnality in the GW sculpt, and the way it's mold cast making it complex to assemble with many ugly lines to hide with putty... Clearly something is going wrong in the process at GW. You did an AMAZING job on this mini, I'm in awe of your sculpting skills, and kitbashing skills ! Can't wait to see how you paint it
It's a problem I only see in 40K honestly. The Necromunda, Bloodbowl and even AoS minis have tons of personality still. I haven't had too much issue with the ugly lines either with those.
@@Ben-fk9ey Or trying to simplify models in 40k as they see it as the intro game into the GW universe. In comparison, as mentioned above, all other subgames are releasing more and more intricate and higher quality sculpts.
This has to be one of your best videos. I think you should seriously consider following a similar format for future videos. Part 1 - resculpt, Part 2 - painting. Amazing job mate. Keep it up.
The trim on the inquisitor I on the leg is insane. In a video like this it is easy to forget how absolutely tiny these minis are, you are sculpting parts that are less than a millimeter. The individual hair strands are also blowing my mind.
Chris: I own a 3-d printer. Me: You ARE a 3-d printer! Stop and think about the scale of the figure... now picture how tiny a SHIN is for that figure... now calculate the size of the Inquisitorial symbol on that... NOW ADD A TRIM?! 😱😱😱 Absolutely flawless execution, I'm very much looking forward to seeing it painted! Make sure to do side-by-side with the original figure so we, the audience, can see how far you've come a painter (as I, for one, am very curious)!
Whoa... you weren't kidding about all the work that went into this conversion. I've seen a lot of cool kitbashes on YT but this one takes the prize for maximum effort. Thanks Chris!
This is amazing, it just sucks that you essentially have to resculpt and redesign virtually every element of the model to make it look like its supposed to. Cant wait to see it all painted up!
holy fuck. i thought your miniature paints were amazing already, but you sculpting skills are something else. that figure is like 50% putty. with all these youtube miniature painting videos, i often tend to forget how tiny all these bits actually are. to sculpt something like those skulls and inquisition symbols on that scale is really impressive. not a SM/inquisition fan, but that turned out great.
I had to pause this video several times so that I could properly appreciate the level of sculpting mastery. And shouted out loud at 13:21. A true masterclass in kitbashing.
I remember when I first found you on Twitch many years ago, and you were sculpting your original miniatures on stream. Seeing a video with so much sculpting included is just nostalgia for me. Oh, and to add to the main topic , you just nailed it. You made him look like how he is supposed to look! Keep up the great work... and paint him!
I really couldn’t bear the official model but Chris’s re sculpt is mind blowing good. Every part of it is perfectly conceived and executed and I’m in total awe of the sculpting. So clean and sharp.
I would love to see more sculpting focused videos. Watching you go through the process is really inspiring and helpful when tackling my own kit bashing/conversion projects.
I keep forgetting that you're not just a TH-cam miniature artist but also a golden demon winner! This resculpt looks so much better then the model GW released! I really enjoyed watching this kind of content! I hope your show it painted soon.
Breathtaking resculpt! Now THIS is a mini that actually represents the character in lore, not the abomination big GW pumped out. Looking forward to seeing what you'll do with the paint job on him!
Its absolutely incredible to see your sculpting work. I really hope we see more of it in the future, since this and your flayed one video are favourites by now, purely from seeing your skill as a sculptor
That is one of the best miniatures I've ever seen. And getting to see the sculpting and process of how it came to be. Pure entertainment. Loved this so much
Amazing resculpt! It's awesome watching you sculpt! Mind-blowing how well you get the second shoulder pad so sharp and just like the other shoulder pad!
God dayuuuuum. That sculpting is sooooooo good. As someone just learning to sculpt I can only hope to be half as good as this one day. Looking forward to seeing him painted up.
I'm jealous of your sculpting skills, amazing! Tried and failed making white scars simbols for my HH minis, so I can really appreciate how much effort went into this.
the contrapostto you gave him is the icing on the cake imo. you took a very static and otherwise boring model and made it so it had a shift in weight, a counterbalance. wonderful to see actual sculptors apply their skills into the hobby!
Wow!!! Simply amazing conversion and sculpting skills. The attention and level of the details is just out of this world. And of course, the likeness to the reference 🤯. Thanks for the video, truly an eye opener!!
Man that looks absolutely stunning! What a freaking upgrade! Would personally preferred him bald and with some fur on the back but that's just nostalgia i think. Dude looks badass, your conversion skills are next level
Oh my gosh!! This was such an amazing and inspiring tutorial. I also remember that being an iconic image for me when I was collecting Grey Knights and inquisitors - very cool codex!! Another great tutorial 😊
Trovarion's conversion is BOSSSSS! There was a 3D model based off the cover image within 48 hours thank goodness. The GW model could be immediately improved by applying a hammer repeatedly to the designer.
Awesome video! I really enjoy watching the process of how people convert and make things. This is exactly the content I wish to make. Looking forward to seeing it painted!
That is the model that we all would have wanted as the refresh! Fantastic conversion! I really like it that you showed how much can be done by "just" shaving the material of the mini down. I think your meticulous work in each step really paid off as the end result is so dynamic. The sculpting bits you did are impeccable! What putty are you using nowadays?Thank you once again for the conversion inspiration. These are my favourite kind of hobbyvideo and every one that you've done has taught me something new.
Absolutely incredible conversion. Cannot wait to see painting video for it! This video really inspired me to do more attempts with scultping, hope you also do more videos with sculpting tutorials
I convert and sculpt miniatures professionally and what you did in this video blows me away. Shockingly brilliant. I'm envious and inspired at the same time.
great video, lovely conversion, and really well explained techniques. I now need to go buy some magic sculpt as it looked incredibly nice to use - though that may just be a testament to your skills.
Wait - just sculpting the skulls from scratch?!. Man, some people have skills! I'm very impressed by the quality of the sculpted elements. And yeah, looks great at the end!
OMG detail is delic. Love it when you do these conversions. I don't think i have the patience at 55 or eye sight to go into so much detail. Great job my man...😊
Coteaz was the reason my first codex was daemonhunters. You did him some epic justice with your kitbashed and incredible sculpting. I do miss the fur mantle though.
Incredible work Trovarion! I remember that codex being the first one I bought as a kid so seeing it be the inspiration for the sculpt made my nerd heart happy. And as always, love learning from your vids.
Brilliant video, amazing sculpting... really keen on seeing the painting of this great character.. I'm not that big a 40k fan but i would love to have this model to paint if for my cabinet!! 🤩
you found what was bugging me in this sculpt, the oversized leg and feet, yours is so much better, and it dosen't look like he have the cheapest power armor, but now it really look like an artificer armor fiting of his rank
THANK YOU! That artwork alone was my biggest turn on during my 40k journey, and my dissapointment when I saw the new model was immesurable. The only thing I would do different is the scale of the eagle, it's too big and it detracts from the main character in my opinion. Also, adding some chaerubs and servoskulls would make it even more awesome.
outstanding work here! the model looks great! your conversion is so much better than what gw gave us and i might have to take a few of your ideas when i go to start adding ordo malleus elements into my imperial agents army down the track
You are ridiculously talented and I'm not one bit jealous.... Honest😂😂😂 seriously though what a great piece of art this turned into! I seriously hope we get a paint video later down the line too. Have to appreciate how much effort went into this and just how amazing the detailing is for something so very small! Kudos. New subscriber activated 👍
Just wow, such a dramatic improvement ! I love the new dramatic pose and how you've managed to bring out the spirt of the artwork. I cannot wait to see how your painting is going to compliment your sculpting. I really appreciate how you layout your thought process and show us the way you're handling the different steps you're taking.
Check out Judo Grid's Modular Display System at: tinyurl.com/32jncska and display your Miniatures and Collectibles the way they deserve to be displayed!
Hi, Trovarian! Stunning job as always! I was wondering - what putty did you used for the project?
I was about to ask the same question. Looks like it’s a lot easier to use than green stuff (although, I’m under no illusions that I’d be anywhere near as good with it as Trovarion).
@@nikitadovidchenko6336 Magic Sculp(t) grey
@@trovarion How does it compare to greenstuff mixed with various amounts of milliput? Anything it can do better that the mix can't? Awesome work of course!
@@luluPampalu You don't have to mix two different things for a start.
I just cannot understand how good some people can handle sculpting materials/ tools. Jaw dropping, literally.
It's nuts, the entire video I was sitting here like "damn bro is really fucking good at this wth"
The model position/compositon really showcases how keen your sculptor's eye is. Keeping the eagle at an angle frames the models face from the front, ties together the lines from the other perspectives in a fluid way, and above all heightens a sense of movement: the model strides forward launching the eagle while extending the other arm+hammer behind it. The model is truly dynamic (not off-balance). Bravo!
All of that was the plan, yes! Glad it was visible!
There's kitbashing, and then there's "Fine, I'll just sculpt 1/2 of the mini myself." Amazing work.
Now that's a proper Coteaz right there. Cant wait to see it painted.
"Games workshop makes the best miniatures". Incorrect. The Warhammer community makes the best miniatures. Fantastic work, Trovarion.
I couldn't agree more
OK, I knew Trovarion was amazing at painting...but that he is just as amazing at sculpting was news to me...and oh my freaken god!
I have never seen a miniature refresh fall so universally flat. Literally everyone is dunking on our boy Coteaz. Really makes me wonder who the hell is grenelighting this stuff?
The sanguinary guard gave him a run for his money 💔
It's very bizarre. If it was just a question of taste then it would make sense but the design doesn't even really look like the previous model or artwork apart from in the broad concepts.
It's 100% a "Fat Positive" person. Just take a look at the Black Templar Castellan, or compare the new Lelith Hesperax to the old. It's pure insanity.
Yeah so many of the new 40k models just look so awkwardly posed and bulky. Almost like they're action figures instead of statues. But aos is out there with absolutely stunning sculpts again and again and again.
@@PerfectionHunter to be fair the black templar castellan is pretty much supposed to be a 1:1 of the John Blanche which they did a solid job on.
The combo between the lack of creativity and personnality in the GW sculpt, and the way it's mold cast making it complex to assemble with many ugly lines to hide with putty...
Clearly something is going wrong in the process at GW.
You did an AMAZING job on this mini, I'm in awe of your sculpting skills, and kitbashing skills ! Can't wait to see how you paint it
the fun fact is that the old minis doesn't have that problem
It's a problem I only see in 40K honestly. The Necromunda, Bloodbowl and even AoS minis have tons of personality still. I haven't had too much issue with the ugly lines either with those.
They're probably making new stuff at a record pace and so corners are being cut.
@@Ben-fk9ey Or trying to simplify models in 40k as they see it as the intro game into the GW universe. In comparison, as mentioned above, all other subgames are releasing more and more intricate and higher quality sculpts.
This has to be one of your best videos. I think you should seriously consider following a similar format for future videos. Part 1 - resculpt, Part 2 - painting. Amazing job mate. Keep it up.
The trim on the inquisitor I on the leg is insane. In a video like this it is easy to forget how absolutely tiny these minis are, you are sculpting parts that are less than a millimeter. The individual hair strands are also blowing my mind.
Chris: I own a 3-d printer.
Me: You ARE a 3-d printer!
Stop and think about the scale of the figure... now picture how tiny a SHIN is for that figure... now calculate the size of the Inquisitorial symbol on that... NOW ADD A TRIM?! 😱😱😱 Absolutely flawless execution, I'm very much looking forward to seeing it painted! Make sure to do side-by-side with the original figure so we, the audience, can see how far you've come a painter (as I, for one, am very curious)!
If Coteaz looked like this id be collecting imperial agents right now.
What a transformation. Killer skills, tones of info to learn from, shade shovled onto GW, snark set to 750%.
Oh yeah, we are so back
Whoa... you weren't kidding about all the work that went into this conversion. I've seen a lot of cool kitbashes on YT but this one takes the prize for maximum effort. Thanks Chris!
You didn’t fix the model….you built an entirely new model!!🔥
This is amazing, it just sucks that you essentially have to resculpt and redesign virtually every element of the model to make it look like its supposed to. Cant wait to see it all painted up!
I literally had to pause the video halfway to write this: your sculpting blows my mind and the precision is incredible. 👏🏼👏🏼
Your kitbashing skills are next level! More videos like this please 🙏
Your model cleaning, pinning, cutting and sculpting really show your knowledge about forms and sculpting.
holy fuck. i thought your miniature paints were amazing already, but you sculpting skills are something else. that figure is like 50% putty. with all these youtube miniature painting videos, i often tend to forget how tiny all these bits actually are. to sculpt something like those skulls and inquisition symbols on that scale is really impressive. not a SM/inquisition fan, but that turned out great.
That Godfather clip 😂
The first time i saw the new Coteaz i had the exact same reaction. Thank god i have the old metal Coteaz that mini is top tier Inquisition!!!
I had to pause this video several times so that I could properly appreciate the level of sculpting mastery. And shouted out loud at 13:21. A true masterclass in kitbashing.
What a great conversion! You have mad sculpting skills, especially for that scale.
I remember when I first found you on Twitch many years ago, and you were sculpting your original miniatures on stream. Seeing a video with so much sculpting included is just nostalgia for me.
Oh, and to add to the main topic , you just nailed it. You made him look like how he is supposed to look!
Keep up the great work... and paint him!
I dont know any other person on youtube sculpting on this level. Crazy inspiring work
Seeing you scuplt those details so casually with such perfection has me questioning reality... so cool!
This is one of the most impressive customizations of a miniature I have ever seen. Incredible work!
Looks incredible Trov.. GW, hire him!
Usually not a fan of the word “fixing” in warhammer videos, but you actually fixed it
Dude, your sculpting skills are godlike. From a goofy, dull mini to such a detailed and unique one is amazing.
I really couldn’t bear the official model but Chris’s re sculpt is mind blowing good.
Every part of it is perfectly conceived and executed and I’m in total awe of the sculpting. So clean and sharp.
Your sculpting ability is utterly mind-blowing! OMG!!!
I'd love to see him all painted up!
The most impressive sculpting job I've seen yet. Those legs are superb and that hair is simple but fits so well to the character.
I would love to see more sculpting focused videos. Watching you go through the process is really inspiring and helpful when tackling my own kit bashing/conversion projects.
Really cool stuff! Awesome content as always. The details you created are really crisp. Admirable! Can you tell which putty you are using please?
Yes this please! What is that putty??
That hair sculp is amazing o.O
I keep forgetting that you're not just a TH-cam miniature artist but also a golden demon winner! This resculpt looks so much better then the model GW released! I really enjoyed watching this kind of content! I hope your show it painted soon.
Breathtaking resculpt! Now THIS is a mini that actually represents the character in lore, not the abomination big GW pumped out. Looking forward to seeing what you'll do with the paint job on him!
This looks incredible, I hope GW see this and take notes . Your sculpting was spot on
Fantastic job, I admire the balance you brought to the mini. Fairly static mini can be so expressive if posed and proportioned properly.
Its absolutely incredible to see your sculpting work. I really hope we see more of it in the future, since this and your flayed one video are favourites by now, purely from seeing your skill as a sculptor
That is one of the best miniatures I've ever seen. And getting to see the sculpting and process of how it came to be. Pure entertainment. Loved this so much
I had no idea your sculpting was at that level too. Incredible job. Can't wait to see what you do with the painting!
By the Emperor's Shrivelled 'nards, the sculpting on this conversion is amazing.
Amazing resculpt! It's awesome watching you sculpt! Mind-blowing how well you get the second shoulder pad so sharp and just like the other shoulder pad!
God dayuuuuum. That sculpting is sooooooo good.
As someone just learning to sculpt I can only hope to be half as good as this one day. Looking forward to seeing him painted up.
That is amazing sculpting. I'm totally awestruck watching all those details take shape and look so sharp.
Absolutely amazing conversion! Your sculpting work is incredible and the finished mini is a first class tribute to the classic inquisition artwork. 👌
I'm jealous of your sculpting skills, amazing! Tried and failed making white scars simbols for my HH minis, so I can really appreciate how much effort went into this.
Absolutely incredible! That old artwork is so amazing and you really did it justice
Dude your sculpting skills are out of this world!
the contrapostto you gave him is the icing on the cake imo. you took a very static and otherwise boring model and made it so it had a shift in weight, a counterbalance. wonderful to see actual sculptors apply their skills into the hobby!
Okay.. that is actually a sick kitbash! Love your painting style but your sculpting skills are next level! Well done Chris
I'm in awe of your precision work of sculpting those details. It gave me some inspiration for the next time, I'll try sculting details.
Wow!!! Simply amazing conversion and sculpting skills. The attention and level of the details is just out of this world. And of course, the likeness to the reference 🤯. Thanks for the video, truly an eye opener!!
Man that looks absolutely stunning! What a freaking upgrade! Would personally preferred him bald and with some fur on the back but that's just nostalgia i think. Dude looks badass, your conversion skills are next level
By the Emperor´s mummified testicles... This is a truly outstanding conversion.
Stellar job, Cris. Stellar job!
Man you and Duncan really gave this character the love they deserve. This is really cool!
This was incredible! Amazing sculpting. I can't wait to see this painted!
It's such a joy to watch you sculpt and kitbash. Superb! This is outstanding
Oh my gosh!! This was such an amazing and inspiring tutorial. I also remember that being an iconic image for me when I was collecting Grey Knights and inquisitors - very cool codex!! Another great tutorial 😊
Trovarion's conversion is BOSSSSS! There was a 3D model based off the cover image within 48 hours thank goodness. The GW model could be immediately improved by applying a hammer repeatedly to the designer.
Awesome video! I really enjoy watching the process of how people convert and make things. This is exactly the content I wish to make. Looking forward to seeing it painted!
I was like, he 3d printed the details how nice, but then I did a rewind. Oh god.
Okay, it’s my goal now, in this hobby, to eventually get as good at sculpting as you are. Cause holy shit that is just some STUNNING work!
I love watching your videos. But specifically your sculpting videos. You are phenomenal at your craft.
This is just wow. It is so inspiring to watch you sculpt minis. Amazing!
That is the model that we all would have wanted as the refresh! Fantastic conversion!
I really like it that you showed how much can be done by "just" shaving the material of the mini down. I think your meticulous work in each step really paid off as the end result is so dynamic.
The sculpting bits you did are impeccable! What putty are you using nowadays?Thank you once again for the conversion inspiration. These are my favourite kind of hobbyvideo and every one that you've done has taught me something new.
Just read the video description. Now I understand why hour Magic Sculpt appears to be different to mine, as I have the white variety...
Absolutely incredible conversion. Cannot wait to see painting video for it!
This video really inspired me to do more attempts with scultping, hope you also do more videos with sculpting tutorials
thanks for the support buddy!
This was freaking insane Trov, such crispy details! Hope to see it painted!!
I convert and sculpt miniatures professionally and what you did in this video blows me away. Shockingly brilliant. I'm envious and inspired at the same time.
This is incredible!! Your sculpting skills are amazing
And that GW is how it is done!!! Another amazing project, can’t wait to see you paint it. 👍👍👍
okay this is some of the best sculpting I have ever seen on a model, I would love to see more in subsequent videos!
You did my man Coteaz justice! The OG model was the first one I tried to paint pretty many many years ago
great video, lovely conversion, and really well explained techniques. I now need to go buy some magic sculpt as it looked incredibly nice to use - though that may just be a testament to your skills.
It's always great time watching you sculpt for minis, absolutely awesome work.
Wait - just sculpting the skulls from scratch?!. Man, some people have skills!
I'm very impressed by the quality of the sculpted elements. And yeah, looks great at the end!
GW: We've remade Coteaz! Isn't this awesome?
Trovarion: ...and I took that personally...
What a fantastic conversion man! looks really dynamic and epic. Very well done.
Incredible sculpting! Blown away yet again!
OMG detail is delic. Love it when you do these conversions. I don't think i have the patience at 55 or eye sight to go into so much detail. Great job my man...😊
Dude that is absolutely INCREDIBLE. Can't wait to see him painted to a Golden Daemon standard ;)
Coteaz was the reason my first codex was daemonhunters. You did him some epic justice with your kitbashed and incredible sculpting. I do miss the fur mantle though.
Incredible work Trovarion! I remember that codex being the first one I bought as a kid so seeing it be the inspiration for the sculpt made my nerd heart happy. And as always, love learning from your vids.
Wow. The sculpting skills are not from this world. Incredible work.
Holy crap this is without a doubt the best, most detailed conversion I've ever seen
Brilliant video, amazing sculpting... really keen on seeing the painting of this great character.. I'm not that big a 40k fan but i would love to have this model to paint if for my cabinet!! 🤩
So glad to see your sculpting skills again. Very impressive work. I like it a lot!
Insane sculpting skills man, that mini looked so much better
you found what was bugging me in this sculpt, the oversized leg and feet, yours is so much better, and it dosen't look like he have the cheapest power armor, but now it really look like an artificer armor fiting of his rank
THANK YOU! That artwork alone was my biggest turn on during my 40k journey, and my dissapointment when I saw the new model was immesurable. The only thing I would do different is the scale of the eagle, it's too big and it detracts from the main character in my opinion. Also, adding some chaerubs and servoskulls would make it even more awesome.
outstanding work here! the model looks great! your conversion is so much better than what gw gave us and i might have to take a few of your ideas when i go to start adding ordo malleus elements into my imperial agents army down the track
You are ridiculously talented and I'm not one bit jealous.... Honest😂😂😂 seriously though what a great piece of art this turned into! I seriously hope we get a paint video later down the line too. Have to appreciate how much effort went into this and just how amazing the detailing is for something so very small! Kudos. New subscriber activated 👍
It's hilarious how much better your version is!
Bro, your sculpting skills are amazing. Awesome work
Just wow, such a dramatic improvement ! I love the new dramatic pose and how you've managed to bring out the spirt of the artwork. I cannot wait to see how your painting is going to compliment your sculpting. I really appreciate how you layout your thought process and show us the way you're handling the different steps you're taking.
This looks like the model GW should have made from the start. Excellent work!
Wow, amazing sculpting work! Looks incredible.