Something I have not thought of; If you store this away, for a few weeks or months, remove the 18650 battery, does it keep the setting, or is it, everytime Bat, runs out, its back the start again ?
I had to shim left and right axis as well as the rear.You will find that when you alter the zoom from 6.5 to 13 the reticle moves significantly so your initial x and y figures need to be nearly 0
Please can you advise where I would place a shim to correct my far right zero? My X axis value is 260 so the cross hair is to the right and when I zoom to 13 the cross hair is on the far right. How can I get the cross hair back centred to 0 value please?
Rich You need to put a shim on the back left hand side of your pard bracket Cut a coke can and use 2 pieces superglue together Or buy a ZB lite pro adapter set your x and y axis back to zero and move your reticle discrepancy on the adapter then fine tune on the pard I have my coordinates x= +3 Y=0 So my reticle is central on 6.5 and 13 times zoom
Just finished mounting it on my Steyr and zeroing it in ....that was a bit of a faff but i should of read the online manual first ...the printed one doesnt even mention zeroing in . So far so good
Google pard on you tube optics warehouse will show you how to zero it instructions not much use if your putting on a dovetail check out keenzo dove tale to weaver very low profile mount
@@garethjones3412 The steyr has a piccatiny rail so its mounted straight on . May think about mounting it on the lower rail to drop the hight if its a prob but at the minute it seems fine .
No its been cleared for uk sales again now . Their is a new importer apparently . A lot of the talk was started by the importers and distributors of other sights which were or are far more costly ,a wispering campaign .
fieldsport cymru yes I’ve just got one of the new imports I’ve got it on Tuesday I took it back today because of the laser issue and they told me that these models were returned to the manufacturer and something was done with the laser they have disabled it because it was too powerful for the UK
@@Ixiapcp How odd ,mines got the laser and LRF too . Oddly enough im selling mine as my night shooting has switched to shotgun and my mates HMR so no longer use it
Something I have not thought of; If you store this away, for a few weeks or months, remove the 18650 battery, does it keep the setting, or is it, everytime Bat, runs out, its back the start again ?
I had to shim left and right axis as well as the rear.You will find that when you alter the zoom from 6.5 to 13 the reticle moves significantly so your initial x and y figures need to be nearly 0
Please can you advise where I would place a shim to correct my far right zero? My X axis value is 260 so the cross hair is to the right and when I zoom to 13 the cross hair is on the far right. How can I get the cross hair back centred to 0 value please?
Rich
You need to put a shim on the back left hand side of your pard bracket
Cut a coke can and use 2 pieces superglue together
Or buy a ZB lite pro adapter set your x and y axis back to zero and move your reticle discrepancy on the adapter then fine tune on the pard
I have my coordinates x= +3
Y=0
So my reticle is central on 6.5 and 13 times zoom
@@jeffbarton6556 Thank you Jeff, I’ll give that a go, much appreciated
Had one for some time great results with it
Just finished mounting it on my Steyr and zeroing it in ....that was a bit of a faff but i should of read the online manual first ...the printed one doesnt even mention zeroing in . So far so good
@@fieldsportcymru4636 you may need to shim under the back mount screw if it shoots to low
Google pard on you tube optics warehouse will show you how to zero it instructions not much use if your putting on a dovetail check out keenzo dove tale to weaver very low profile mount
@@garethjones3412 seems ok to be honest . I had to shim my photon on my Air Arms but it was ok on the Pro X and this looks the same.
@@garethjones3412 The steyr has a piccatiny rail so its mounted straight on . May think about mounting it on the lower rail to drop the hight if its a prob but at the minute it seems fine .
This is a good example that you can put anything on TH-cam, no matter how bad it is.
Lol lol ohhhh dear ,dont watch then ..its not rocket science is it
Just found out the red dot laser is disconnected stupid UK laws
No its been cleared for uk sales again now . Their is a new importer apparently . A lot of the talk was started by the importers and distributors of other sights which were or are far more costly ,a wispering campaign .
fieldsport cymru yes I’ve just got one of the new imports I’ve got it on Tuesday I took it back today because of the laser issue and they told me that these models were returned to the manufacturer and something was done with the laser they have disabled it because it was too powerful for the UK
@@Ixiapcp How odd ,mines got the laser and LRF too . Oddly enough im selling mine as my night shooting has switched to shotgun and my mates HMR so no longer use it
fieldsport cymru ok