@@amirulaa7071 I would assume he meant side, and I was wondering that too. It looks pretty tight even with the raw pcb ram. think the vengeance LPX ram would fit next to it?
You need to have outlet at the top, because of air escaping (technically it can face down, but you need time to time turn the pump at the max speed, to drag the air out the pump, and it may be very noisy most of the time, because any, even tiny, air bubles make a lot of noise and vibrations in the pump). But the block itself is symetrical, so you can rotate it by 90° to all 4 possible positions, when it does not interfere with anything else arround. But the way shown in this video, AND the one with all ports at the top ,are recommended for optimal air escaping even with the slowest pump settings. The same for any pump and/or block, because or air physics... Detailed rewiev, and diferrent mounting position ;) th-cam.com/video/SBIWgKmwr68/w-d-xo.html
use ur words, just a tip btw they make 2 versions of that appearance 10w and 17 w they also make rgb acrylic and solid black as pictured good pumps and upgradable to ek ddc.
Hey, what issue are you having right now? As for installing i think it quite straightforward, u just mount it to the stock backplate for the motherboard.
@@amirulaa7071 i should probably start from the beginning i just planned my loop put it together and now im trying to fill the loop by power cycling the pump but its getting no power
@@goingalloutcuz have u tried turning the knob ? And also I suggest u angle the pump like 45degree when filling, if u have extra tube try to use that also as a reservoir and fill extra on the fill port of the block. I also having trouble when i first fillup the loop. Did u hear any pump noise?
Pressure kuat, boleh pegi upto 4800rpm, kalau nak performance and bunyi xbising boleh maintain dkt 2300rpm pun dh ok. No issue utk gpu n cpu waterblock, cuma bila tambah other accessories mcm flow indicators, filter, jadi slow sikit flow air dia.
video looks so good!
Hey question how much clearance for the ram i might get this
U mean on the top of the ram? Or the side
@@amirulaa7071 I would assume he meant side, and I was wondering that too. It looks pretty tight even with the raw pcb ram. think the vengeance LPX ram would fit next to it?
would the block fit rotated 180 degres ? would there be interferences with the vrm heatsink?
You need to have outlet at the top, because of air escaping (technically it can face down, but you need time to time turn the pump at the max speed, to drag the air out the pump, and it may be very noisy most of the time, because any, even tiny, air bubles make a lot of noise and vibrations in the pump). But the block itself is symetrical, so you can rotate it by 90° to all 4 possible positions, when it does not interfere with anything else arround. But the way shown in this video, AND the one with all ports at the top ,are recommended for optimal air escaping even with the slowest pump settings. The same for any pump and/or block, because or air physics...
Detailed rewiev, and diferrent mounting position ;) th-cam.com/video/SBIWgKmwr68/w-d-xo.html
use ur words, just a tip btw they make 2 versions of that appearance 10w and 17 w they also make rgb acrylic and solid black as pictured good pumps and upgradable to ek ddc.
i actually just bought one but im hahing trouble installing it would make a in detail video please
Hey, what issue are you having right now? As for installing i think it quite straightforward, u just mount it to the stock backplate for the motherboard.
@@amirulaa7071 i plugged the molex in and the pump doesnt turn on
@@amirulaa7071 i should probably start from the beginning i just planned my loop put it together and now im trying to fill the loop by power cycling the pump but its getting no power
@@goingalloutcuz have u tried turning the knob ? And also I suggest u angle the pump like 45degree when filling, if u have extra tube try to use that also as a reservoir and fill extra on the fill port of the block. I also having trouble when i first fillup the loop. Did u hear any pump noise?
@@goingalloutcuz how do u turn on the psu ? Do u use psu jumper switch?
What's the pump rate? Doesn't list on the website.
Wondering if it's enough for cpu + gpu cooling.
Its a "clone" of the DDC pump, so yes, it is ;)
where to buy? Is it silent?
maybe you can search cpu block pump reservoir combo
Hey i bought this from Taobao. Depends on the rpm u can get silent operation with 2200rpm like that. It can co up to 4800 rpm but it would be noisy.
AliExpress, I think it's from a company called Barrow.
@@fornoobs69 yes correct you can also get it from AliExpress and the brand is Barrow.
@@amirulaa7071 I'm thinking of buying it too, Got an NR200 custom loop plan in mind.
Does this mount using the cpu bracket that came with the motherboard? I have an msi board with a custom back plate.
I mean the backplate, yes
Tekanan pump dia kuat boleh support flow ke GPU sekali tak?? Bunyi pun kuat tak bila running?
Pressure kuat, boleh pegi upto 4800rpm, kalau nak performance and bunyi xbising boleh maintain dkt 2300rpm pun dh ok. No issue utk gpu n cpu waterblock, cuma bila tambah other accessories mcm flow indicators, filter, jadi slow sikit flow air dia.