ฝัง
- เผยแพร่เมื่อ 25 ส.ค. 2024
- 2nd part of watercooling my NR200 P.
Specs:
AMD Ryzen 5 3600X
AORUS B450i Pro Wifi
16gb Ram (2x 8gb 3200mhz)
EVGA RTX3080 FTW3 Ultra
APACER 256gb SSD
ADDLINK S70 1TB nvme
Noctua Chromax NF-A12x15
Scythe Kaze Flex 120mm x17mm
Cooler master V750 SFX PSU
Watercooling:
BARROW CPU Pump Res combo waterblock
BYKSKI GPU waterblock N-EV3090FTW3-X
XSPC TX 240 standard (20.5mm)
XSPC TX 240 cross flow (20.5mm)
BARROW Anti-off Hard Tube fittings 14mm OD
BYKSKI 90 deg rotary fittings
BYKSKI copper tube 14mm OD
BYKSKI 3-way Flow indicator
BYKSKI Acrylic filter
Custom:
Distro plate 140mm x 104mm
Acrylic Top Hat 18mm
Custom unsleeve white psu cable
All videos was shot, editted and rendered using Iphone 12 Pro Max with Lumafusion.
Dude your production value and attention to detail is insane. Love this build.
Thanks! Im planning next build with O11 mini,
That is such a clean build! Now I have inspiration for my nr200p.
Incredible! I liked the fact that you had to use a special out/in unit on your GPU to make the tubbing and the dual radiator fit. Those curves of hard tubbing on the CPU block look really nice! Awesome video! Congrats!
Thank you!
Your build is truly gorgeous mate.
Thanks, im currently planning to swap case to O11 mini next.
That acrylic sheet on the top, is pure art.
I really want that to hat addition! Was considering the o11 mini but that too hat would definitely make me go with the nr200 since I could use 2 radiators easier
Yeah I honestly forgot that could be an option. I'm interested to try this with a nice piece of hardwood or something as a cheap alternative
the Distro plate is sick...I need one. amazing build mate
Having also done my custom watercool mini itx in a mini tower, temps on every components get much higher. I have resorted to watercooling the nvme and the ram. You have two 240mm, that's amazing. I am runing a two 120mm... on a 3080 (soon 3090 with ek active backplate) and 10900k.
That will be toasty with the 3090. What case are u using now?
@@amirulaa7071 at the moment with the 3080 and 10900f I am in the top 60° (depending on the game) on the gpu and top 50° (also depending on the game) on the cpu. I don't push my fans too much, max 1250 on the three of them. Once I receive the active backplate, I'll re-do my waterlook with the 3090 and also I will watercool the ram. My case is the Silverstone LD03. The waterblock I am using for the 3080 is from Corsair, from the test I see online, you do get a few degrees less with the ek waterblock.
Excellent build! Got my hands on NR200... now just waiting for non-existent stock of 3080
Yeah its almost impossible to get nowadays with the markup price its even worse
I need that top hat
You're great engineer, the build is art, it's quite insane how did you plan and develop such a complex, nice looking and I believe incredible performance machine! Wow! ❤
Great video. Love the music too !
Looks very good! well done
Thank you! Cheers!
Can you make another 18mm Acrylic Top hat? I need one just like it so I can mount some top fans; can't at the moment due to a very tall GPU waterblock vertically mounted. Please let me know! Thank you.
im amazed but same time upset cuz i want to see it working
Bro, you might want to consider buying conical shaped "grinding stone" drill bit to debur metal pipes.
Wtf this is insane bro
Stay tune for my next buil in o11 mini !
How'd you make that Top hat???? That's beautiful and way more beautiful than 3d printing
I need to order the disto
that is fking siiiick!! Love this one
you scared the shit out of me not telling us you saw the leak. the video carried on as if it never happened...
this look amazing, im just disappointed you changed the top. im looking at doing this but not with any rads inside. ive got 2 360mm rads i want to use so im going to pipe to them outside my case.
That would be even greater, dual 360 rad would be more than enough cooling for the component. Well im just trying to accomplished what is impossible. was planning on going triple 240mm inside the case, but this would japordize the glass side panel, since i will be using the mesh side panel for airflow to the 3rd radiator.
amazing, keep up the good work!!!!
Machines and more has a mod where you can have the top radiator with fans without having to increase the top hat hight
also would love to know the total cost of water cooling?
Hi i havent count since i bought it some every week or month, would say around 5-600usd
How can I get that top hat. It's so clean compared to others
I'm shocked, I'm using the same pump and tried to use the same orientation and port configuration as you and it didn't work. There was absolutely no flow. I had to use the fill port (your top one) as inlet and the middle as infill, it was the only way to make it work. Then I was looked over reddit and many people had to install it the same way.
I would suggest to replace Chromax fans on rads, since they are not designed for static pressure.
with that rad its a nonissue its only 20mm thick and has a fairly low fin density... now that being said that super slim rad performs way better than you would expect... ive seen one of those xspc tx240's cool a 3080 and 12700k
that's so lovely
Can you put your files to print this top hat ? Or to cut in acrylic please ?
Epic build :)
Wondering where you got the distro on the back wall & Top hat? I'd like to purchase one
Sick!
This top hat 🥵
I wonder if its possible to stuff 2 280rads in the MAX edition without needing a spacer
Kualiti macam nama channel; Amirul AA = AAA. Nice bro!
Thanks bro 👍🏻
Bang gempak giler
Great build, I was just wondering how I could order from you.
Bang itu acrylic top hat dan distro plate bikinnya gimana help keren banget sumpah
looks boss - kudos!!
This is soo nice, I would love to build something similar but I don’t have the budget for that... I’ll have to stick to air cooling on the gpu when the FormD T1 is back in stock
Thats a great case! One of my fav case was planning to get those but it’s difficult to get
@@amirulaa7071 yeah is so difficult to get but looks so cleann
@@julius9888 yup the design is sleek. Same goes to Ghost S1 but nowadays theres alot of Chinese knock off copied this itx cases.
@@amirulaa7071 oh yes definitely! I love the minimalsitic looks and sharp edges of the T1, the S1 and NCase M1 are next on the list!
Right that´s true and even some other ITX cases...
terbaik ar bro. auto subcribe.
You deserve more subs
Thanks!! Im working on getti g more subs but its quite difficult haha
@@amirulaa7071 Anyways, i will try to move a prebuilt on it!
where did u get that custom distro plate ? Assuming youre from malaysia
I think I saw a filter in there. They never seem to be used or reviewed. I wonder if they add noise. Do they work? Can you comment? Thanks.
Is that top acrylic piece wide enough to "hang" the rad within it? Could the same thing be achieved with, say, 30mm spacers? I'm looking for a ITX case to replace my h210 as its too short for my new gpu and the NR200 is a case that comes up very often.
god tier mod
hello. where can I buy such an extension for the radiator?
Nice!
Where did you get the acrylic top hat?
Is possible to buy the acrylic top plate ?
Hi so far not yet the design is not yet perfect
Where i can get the distroplate?
Can i mount a radiator top on nr200??
5:48 rip
What is that rexervoir on the 92mm fan mounting side? Link pls and name
That is custom made reservoir.
@@amirulaa7071 and how i can get one?
@@S3ThOt i have one extra to letgo. Can you email me at amirulakmal.adnan@gmail.com
Where can i order the Custom Top Hat?
Custom made bos,
Is it possible to flip the cpu block 90 degrees to the left so the in/outlets are on top on this platform, assuming its AMD?
I think need to check whether it’s interfering with the bracket mounting screw, as for the block and pump wont be an issue.
th-cam.com/video/SBIWgKmwr68/w-d-xo.html
Nice build, how are the thermals with thin rads?
Hey, im getting Cpu 75 C and Gpu 65 C on load/gaming, idle 45 and 45 my ambient here around 28/30. Can say it is better or not since i dont have data for thicker rad.
Green screen?
Do you provide services to custom made the TOP spacer and the distro plate at the back ?
Hi i am currently taking order for the distro plate. Planning to get it to 10 order which currently i have around 7 orders from reddit. The top plate i wont be selling it since its not perfect n i havent figure out how to bring up the front panel i/o button like the usb, and power switch.
@@amirulaa7071 Count me in, can I have your contact or email ?
I definitely want to get my hands on the Top-Spacer!
@@amirulaa7071 Hello can I have your contact please? Your build is just insane!
@@xeneox2718 can email me amirulakmal.adnan@gmail.com
non RGB Love
subbed bro
Thanks 👍🏻
Cool!
Which manufacturer rear 90mm distroplate?
リア側の90mmリザーバータンクのメーカー分かる方教えて頂けませんか？
Custom!?
Hey yeah its custom made.
Neat build!..do you have the CAD drawing for the custom part?
Im intersted to buy of you sell it, im from Malaysia btw😁
Is it possible to share information or AI files about Acrylic Top Hat 18mm
Hi that is custom made by myself.
@@amirulaa7071 Don't have any electronic files?
Berapa temp idle, on load?
Anybody know where i can get one of those acrylic top hats
Kat mana buat bro top hat. Pening 3d print tak cantik
Laser cut dekat awang cutter.
Is that the stock pump on the barrow cpu block? How good is it?
Its good i think, just that to keep it at acceptable noise level i need to put it on 2-2200 rpm. Which affected the flow rate abit. Full force it can go 4800 rpm but quite noisy.
@@amirulaa7071 At that RPM range would you still say it's noisy? My current pump is "quiet" at minimum rpm (around 1500) but it has this high pitched noise that I can notice if I turn my ear towards the case even from 3+ feet away. At 2200 rpm I can definitely hear it clearly.
@@gbtygfvyg at 2000-2200 rpm. It is quiet for me, the pc is only like 1-2 feet from me.
ada leaking tu bossku
I want that top hat so bad what a great idea. I'd push rad thickness to the limits on account I already put an Iceman on mine. Do you make the top hats?
For now I’m not planning to sell yet since the design is far from perfect.
@@amirulaa7071 You can see the drawings of your Distro plate 140mm x 104mm and Acrylic Top Hat 18mm ? To try to make the same ones. I was very inspired by your work!
6:46 It is sooooo wrong man,, upper radiator seems TX240 of XSPC and it should not be set up fittings like that!! Fittings need to be cross fitted. Lol
That is just extra tube & fitting i put to let the air out my man. I know it should be cross, the name is already crossflow. The flow needs to be crossing.
yooooooooooooooooooooooooooooooo commenting for algo
Hello what is your reddit please?
Custom acrylic top hat tu beli mana?
Custom buat sendiri bro.
@@amirulaa7071 orang indo nich, mantap..... Lagi planing juga bro buat di nr200p, bracket radiator buat atas lagi 3d print mau coba dulu, acrilic beli dimana bro?
3:43 is NOOB >.
Hey I want to customize 2
Acrylic Top Hat 18mm Can you chat privately?
Hey, sorry I don’t sell that as the designed is not perfect maybe one day if I can solved the issue for mounting and also the front I/O Then I’ll sell
@@amirulaa7071 It's okay, I have a solution
Can i want 2 slices
Only 272 subs?
Yeah, 😅
Mmm.
Kkķkk
This shows how you can have a lot of money and make a ugly pc
How'd you make that Top hat???? That's beautiful and way more beautiful than 3d printing