How to adjust Y axis belt on cr10 & cr10s | Adjusting belts,rollers & eccentric nuts on cr10s
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2021
- As always thanks everyone!
If you’re not subscribed hit that subscribe button!
Questions or comments? Drop me one in the comment section & I’ll promptly reply!
If you like the video give me a thumbs up & we’ll see you next time. - วิทยาศาสตร์และเทคโนโลยี
If the belt tentioner screws are equaly set left and right the belt could still lean to one side. Then look below the bed where the two ends of the belts are attached with a piece of pinched metal.
For example if the belt is still going to the right, then move that metal end piece to the left with a screwdriver. The same count's for the X-axis belts.
Good vid tho it helped me discover what I've just written.
Thanks this was a really clear way to see how to tune my cr 10
Glad it helped!
Thank you. Very helpful. : )
Solid video!! This is why I rocks with you DW! Not afraid to share knowledge! My mini should be here anyday now. One day when I grow up I'm gonna get myself a CR-10 big body just like you (LOL)!
Lol just keep searching on eBay. Believe it or not I got mine for $220 brand new return
Do you have a video on adjusting the Y-Axis offset?
No but I can see you having an issue with the belt shifting to one side?
I'm getting "ringing" around letters and holes. I'm hoping this adjustment will help with that! Thanks for the video and from your Intro I'm gonna check out your Channel 🤘🤘
Have you tried changing combing to not in skin & turning on z hop?
@@Darkwingdad No... I've not heard of these functions/settings. I use Simplify3D, so I guess I have some research to do 😁
Last night I took my printer off the table, tightened all bolts (nothing was really loose), and did my best to tighten the belts. My benchy test after still had ringing and a couple other anomalies that I don't like, but it's still a good print. I'll be posting pictures on Twitter at some point today; @fatboy1271
I really appreciate the reply!
12:06 While setting it up, and person that was over said he was going to level the bed. In reality I believe he changed some settings because the Y aces will not auto home. It auto homes the right way for the X and Z aces, but not the Y. It’s in the middle of the Y aces and when you manually move it, it will not go forward past the middle of the Y aces. But when I manually dial it for the middle of the board, it’s at the very back edge of the Y aces. If I try to go past that even further it stops and makes a grinding noise. Do you know how to fix this? 12:06
What printer?
Having trouble finding out how do you adjust the back of the y axis by the motor?
What machine? A cr10?
@@Darkwingdad yea the cr10
@@metalboss86 the tensioner adjustment is in the front the rear is simply the motor & gear. If the belt is off or uneven you’ll have to loosen that belt, realign it than tighten. If the belt is loose just tighten that front bracket by moving it forward & securing it.
@@Darkwingdad Any idea of what would cause the rear motor & gear marked (y) would be making a squeaking sound? Its coming from the motor unit. Even with the printer off when I pull it back and fourth it makes that sound. Sort of like something in there needs lubrication. Mine is a CR 10 V3.