Turn the WORST WOOD into something beautiful?
ฝัง
- เผยแพร่เมื่อ 14 ก.ค. 2023
- Get an exclusive @Surfshark deal! Enter promo code DAINERMADE for an extra 3 months free at surfshark.deals/dainermade
Can I turn this old palletwood into something cool?
G'day,
I have turned on memberships as I became elligable, memeberships really to help support me to keep the channel growing. Appreciate any supprt and am toattly greatful. thank you.
Join this channel to get access to perks:
/ @dainermade
MEMBERSHIPS 🙏
Past and Present
Come and go as you please
Your name will always be here!
Thank you Kindly for supporting my channel
CHECK SQUARE CUBED
Dale Cordwell - Delbasid Timbers
Barber’s Paddock Woodworks
Tim Garrett
CHECK SQUARE SQUARED
Brian Tyler - OUTDOORS WITH BT
Francisco Martinez
Gary - Possumhead Carpentry
Glenn - Presto’s Woodwork
Angus Lyons
Reubz Pene
Staffordshire Craftsman
CHECK SQUARE
James Finger- FIXIT FINGERS
Mario Capellano- THE WOODFATHER
Karl Pope - KARL POPE WOODCRAFT
Paul Williams
Alberto Bressen
Gus Elliot
Geoffrey Nicholson
Mahli Peneamena
Dryer Thackson
Teresa Cole
Mahdi Peneamena
Rich Staniland
Sam Potashnick
Lucas Wincote
Russell Waddington
Peter Middo
Angus Lyons
Clayton Miller
Sin Bin Creations
Martin Stanik
Tim Bankes
Vic Lampert
Brandon Harjer
MrNetable
Kelvin Jardin
Tool Price Check
Das-sprechend-Pferd MR.Ed*
Lee Bennett
Lol Purl
John Storrs
GorillaQuipster
mrmjspencer
SAFESTYLE EYEWEAR (Affiliate) DAINER10 at checkout 10% off
safestyle.com.au/?ref=
Power Tools
Bosch Bench Drill press - amzn.to/3SCJs0J
DEWALT 1800W 330MM THICKNESSER DW735XE - USA amzn.to/2XfAFqD
Dewalt Router Trimmer - Australia amzn.to/3gxwtud USA amzn.to/2XdFUqY
Dewalt Orbital sander - USA amzn.to/2ZRYEhA
Dewalt Drill driver and Impact driver -USA amzn.to/2TMWmML
Bosch Sliding Glide Miter Saw - USA amzn.to/2XijDsa
Other Tools and useful stuff
Pneumatic Denailer - Australia amzn.to/36LOQGs USA amzn.to/3cirEBm
(the one I need)
Metal Detector - Australia amzn.to/395DzSc USA amzn.to/3gAV0hI
Clamps Irwin Quick Grip - Australia amzn.to/2FIOCDV USA amzn.to/2TPxi7W
Pipe Clamps Australia amzn.to/35R6oPT USA amzn.to/2MegEdW
Wood Work Pencils Irwin - Australia amzn.to/2tdEOz5 USA amzn.to/36J9h7v
10 inch dewalt blade - Australia amzn.to/38WcYXR
Irwin clamps - Australia amzn.to/394YzJb
Stanley 12 inch Square - Australia amzn.to/2Aj1zoK USA amzn.to/2XHaDM5
Toggle Clamps -Australia - amzn.to/2Xe4CpR USA - amzn.to/3gF4nNq (same size, different brand)
Bow Products Push Pro - (push stick) Australia amzn.to/2ZUObSi USA amzn.to/3duCJAE
Bow Products Guide Pro - Feather board - Australia - amzn.to/3dhdphy
Products I use:-
Titebond III Ultimate Wood Glue - 3.785ltr - Australia amzn.to/37Spnuv USA amzn.to/36Se6M4 - แนวปฏิบัติและการใช้ชีวิต
![[TH] Esports World Cup : Knockout Stage Day 3](http://i.ytimg.com/vi/t3FcD5TD8qI/mqdefault.jpg)
This is what I enjoy about watching you. I feel like I make so many mistakes, but videos like this make me want to keep going.
Exactly, I’ve even burned a few unrecoverable pieces so I don’t have to look at them 😂
Exactly, I’ve even burned a few unrecoverable pieces so I don’t have to look at them 😂
Well said!
I enjoyed the video but a sorry to hear about bench-time. I hope you recovery quickly. I can't wait to see this finished project.
Just started pulling pallets apart today. Hopefully I'll move on to reclaimed hard woods later. It's amazing how much you can save from something that doesn't look like it has much value. 😊
Salvaging is a skill that is going to continue rising in value as the years progress. Good on ya for starting now.
The optical illusion is great!
Very clever with all the patterns, I wouldn’t have the patience, amazing work 😀
@@dainermade hmmm maybe one day !
Beautiful, almost unbelievable its made of old pallets.
Great to see your honest and all your mistakes. We all make them! Go steady and Hope you have a fast recovery and you are back in your shop soon. 👍
That looks gorgeous. And I don't think I'd care about the square issues if I were the one to purchase it!
I love the idea of using it as your outfeed table!!!
Oh mate, the problems you pointed out... I feel your pain.
I've had a few projects like that where you've invested a lot of effort and something is so badly wrong you need to weigh up whether to fix it or scrap it. I urge you to make the call one way or the other and move forward.
Best of luck. I always enjoy your efforts and it's inspiring to see what you come up with. I even did a 1 pallet project myself last week!
Success or, not so much... you are always entertaining! And if it was easy... everyone would do it!! Thank you Dainer!
Hope everything's alright Dainsey, look forward to the conclusion 😊
Great design! Love it. These are the same kind of mistakes I make. Thanks for showing us the real stuff. Hope all's well. Don't stay away too long.
The patterned turned out awesome. I’m sure you can macgyver it into something worthwhile when you’re back at it. Get lots of sourdough and avo’s
Mark, Dainsey, Full Business Human,
Thanks for all your videos so far. I have been following to hone my woodworking skills since I started 18 months ago.
Hope all goes well for you and your family with your time away from the camera - hoping we call all breathe easier when you come back online.
Martin.
Man, this is the first time I've encountered your channel, and not even a minute in I had to pause because that line at 0:26 "I just want to make cool shhhhhsstuff, be excellent to each other, and then fade off into obscurity" sent me into a moment of profound existential contemplation of mortality and the fleetingness of our individual existence in the vast timeline of humanity.
I haven't gotten to anything about woodwork yet but judging from that, and the piles of timber in your intro that look exactly like the piles of salvaged timber lying around my place, I think I'm gonna like you a lot.
"I like recycling, it makes me feel good... on the inside....."
Me Too.
Carry on!
More inspiration for someone like me who has yet to dip my toes into making but keeps thinking of doing it 😅. Ive got a handful of tools and will take the plunge soon.
I have some screenshots of our wood we had for so long and idk if we still have that wood since the day our yard was finally cleaned up.
As always great video so entertaining as usual. Can’t wait to see the finished product
Love the pattern this design makes. It looks amazing!
Another awesome vid! Those zigzags look beautiful! 🤩
I bought a pallet buster the other day, can't wait to get making my own Dainer inspired pallet bricks 😁
What a beauty. Love surfshark, we've been using it for 3.5 years now. Love the cameo from the Tassie bushman.
There's a bit of an optical illusion in that design that is awesome
Dude you are awesome! Top tier content as well man keep it up! A lot of good information and inspiring me to go full business human
These blue pallets that were in the bin....wink wink...nudge nudge 😂 I feel your pain when something you are so keen to get right doesn't quite go to plan.....just breath mate.....breath. Great vid as always 👍👍😁🇦🇺
@@dainermade 👍👍
I enjoy these videos for what you can learn about upcycling pallets and what you can learn about fair dinkum aussie slang
Hi mate, wow, I reckon it turned out amazing. Love the pattern, especially when you applied the finish 👌. I reckon it was well worth it. You've done an amazing job as usual. Kudos to your son for helping. Waterfall mitre corner may have won this time......but you are realing in close behind and will surely catch up soon 😂. Love the inspiration by the guy who wants to join wood to buy sour dough bread and the rest of the things his mentioned. Amazing. Cheers from South Africa
Great pattern and finish. You inspire us all👍🏻
That too if it becomes your new outfeed table it will be sweet! Look forward to what is to become its next life!
Hi Dainer. I have come to your channel from Jesper's. I've got to be honest, the design and finish of that wood speaks for itself - it's just breathtakingly beautiful and I've very grateful that you took all the time you did to make it and share it. However I came from Jesper because you are a part of a really wholesome and inspiring community and I feel like we need more of that. Love the priority you make out of recycling what you've got. Looking forward to seeing how you'll recycle this "mistake" to help it find it's final form. All the best!
Thanks mate! The community is unreal, find the right people to surround yourself with and away you go. Hopefully I’ll do something with this once the new saw arrives 😉
Pattern looks ripper mate, a little bit of finessing, and check square will be apples.
Great to see you using the old wood for good instead of evil 😁
Mate, this is absolutely fantastic! Absolutely worth it, the chevron pattern is the bees knees! Love seeing Check Square Jr. in the shop with you. Looking forward to seeing what is next for this particular piece. Take care and be well Mark!! Or is it Dainsey?? Either way it's all good!!!
I love the pattern too. I need to make some.
Love it mate! i had a tought week with square too 😀
@@dainermade Mine was so off I corsseye balled it :D
don't be hard on yourself mate the time alone it took to prepare the timber and put together shows fanatical level of dedication
I found your channel recently and I gotta say that I really like your work. I'm a woodworker myself although in a little bit of a different spectrum but I think I might give working with pallets a shot. My father has a lot of unused ones from his work so I might be able to make something out of them. I'll be sure to come back and look for tips and tricks. Keep up the good work, brother
Dang mate! So close! It looks real nice though. Maybe try to trim it up to square?
There is always next time!!!
Gosh Dainsey, I hope your benching doesn’t prove to be too serious. Good luck and hope for a speedy recovery.❤
M8 nice one maybe not as nice as a spiders wanger but still up there. 😅 Love the diagonal pattern and that new finish 😁. A no what u mean about loosing shop days am in that right now aswell kids off from school/nursery another 4 weeks!!😬😭 U ok though hope everything is gonna be right!! Were here for ya! 👍🏴
@@dainermade ohhhh interesting very interesting. It's orite m8 know your busy. Am having shop problems right now right in middle of another commission in the I'm loosing my shop!😬 Gonna need find new one quick smart. Can't wait for new video. Hope your staying well! Can u send some that sun round this side the world we've just got pissy rain!! 🏴👍
Hey, you can get all nails out (even headless) drill 2 holes right next to the nail on the long side as deep as the nail. Then insert a nailpunch and move it side to side to make the nail loose. When its loose you can take it out with nose pliers.
@@dainermade haha true. Sometimes you get caught up in the moment.
I finally found some hard wood from pallets where I’m from , can’t even get the nails off the stringers , pallets gets sent back where they used from cause we get everything shipped by plane , I mostly breaking g them up juss gathering wood to use , I need tools to make things easier
Really enjoyed this ty man, nothing like the feeling of turning trash to treasure. The top is absolutely beautiful, I think the alternating good/bad side created a shadow-like effect that makes it look 3 dimensional, unreal.
Great looking piece! Really cool that you show everyone ya stuff ups too! Not every project goes to plan and that’s not something to be ashamed of. Good on ya mate!
Love the look of the pallet wood - you find some great wood in your pallets - I've looked in my area and all just pine/soft white stuff, nothing interesting...but in time, I hope to build something out of them....
Good work Mark, Sam and Harley 👏
Mate that looks amazing. I don’t think anyone will notice the ummmn ‘check square’ issues. 😊
@@dainermade LOLS....I like what you did there.
Thanks for all the videos you make I thank you do a amazing job
Glad you like them! Cheers
That's fekking beautiful mate! I love that pattern
One word of caution about salvaging wood. I once took a pallet home from work; it had come carrying a machine from Asia. It was a beautiful deep red wood with great grain figure, so I couldn't wait the get a piece of it onto my lathe. The chips came off quite fine, creating a lot of fine dust. I wasn't wearing a dust mask and my nose soon started running; I expecting it would just be clear fluid, like comes during a allergic response, but it was blood flowing from my nose, quite heavily! It seems that there are some species that can really get you in trouble!
@@dainermade It took me a minute to clear my sinuses, but as soon as the dust was gone, it was over, no lingering effects. I read later there are several species that can induce bleeding like this, but it was a real surprise to find it out first hand and without warning!
The moral of this story should just be always wear a dust mask. All fine wood dust is a carcinogen and not something to breath in. Masks are cheap. Cancer is not
That looks amazing! I feel like it’s the culmination of all your veneer work but now solid right down through. (Who cares about square, anyway??) I hope all is well with your situation and you recover quickly - we’re pulling for you in Canada. As we say here, keep your stick on the ice.
Glad to hear that!
Beautiful pattern, doing my eyes in a bit. I was in FNQ recently so I sort of understand how hard it must be in your shed at times. Keep it up. BTW I have followed your recycling tips with nail removal and detection but my detector does not pick up embedded stones. Tiny bits of gravel are not kind to my thicknesser.
@@dainermade eyes are not what they used to be!
"Wonky As A Donkey!" 😹
lol... the struggle is real
Felt the sudden urge to stay up until 1:30 in the morning and I just found out why, it was worth it man.
Thank you
BEAUTIFUL !
Mate youve inspired me with your "just get started" thats why im doing my recycled rockers and ill send more pics soon as work work keeps getting in the way :( cheers Darren
A) You need that cool pneumatic nail remover that Jesper has. It'll turn that 90 minute removal time to 30 minutes.
B) That pattern is beautiful!
Mark, Can't wait to see it finished, Hope alls ok? And another great Vid BTW
Skip the coffee table and go straight to the outfeed. On brand and awesome :D ...but you'll need the new table saw first :P
Great job. All the best
If you knock the difficult nails in a bit it breaks the rust and makes them possible to remove (most of the time). Learned that from Izzy Swann
Pretty happy to have found another Aussie TH-camr, subbed straight away 👌( I love recycling timber too) 😀.
@@dainermade no worries at all and I’ve just found another one today too … Kuffys Woodwork.
This is great. Just found you channel so working through your videos. You are inspiring me to produce something. One thing that has surprised me is how much is done by glue and I wonder if it will hold, then the -polishing up and sealing etc. Much to earn I am sure the answers are in videos of yours yet to be seen!
Glue is a magical thing. A good glue bond is stronger than than the timber itself. Quality glue though. Enjoy the ride mate... and thanks for watching a few
Love the video mate. Also, I have to admit the outfeed table is the best idea. So probably stick with that. However, if you want to salvage it you could set up a jig to cut the waterfall edge square. You could use the table saw or set up a router as well. Either way I think its a win-win.
Great work as always - yes errors happen but hey…..it’s a learning process. Keep up the good work 👍
Almost an awesome job Dainsey, you were only out by thaaat much. 😂. Keep up the good work. All the best.
Always a good day when you post a new video. I don't have to watch old ones for the 40th time lol i hope things are ok bro. Take care of yourself first and foremost
Lovely stuff . I’ve never realised how similar you are Nick Z talk / present.
WOW EXCELLENT DUDE !!!
Good one mate. Hope all is well.
Cheers..... Pete
Mistake's are a way of telling us we can`t alway`s get it right. With each mistake come`s a wonderful thing ( KNOWLEDGE ). That`s how woodworkers succeed in the venture`s of woodworking and then out come`s a piece of art. We stand back and find we are only human but we do produce remarkable thing`s. Great video and narration Thanks for sharing.
Mistakes happen. That's how you learn and grow. But I always cringe when people admit critical mistakes then proceed to sell their work for a few thousand dollars. I appreciated your repurposed outfeed table idea.
Brilliant!
We all make mistakes buddy, try not to be too hard on yourself.
Use it in the shop and it'll serve as a reminder to take your time, check twice and will therefore pay more dividends than cold hard cash ever could 😊👍
Love your channel and love your enthusiasm. Just subbed to Sam's channel too 💪
Love this man. Also, unrelated, but not: I just want to take a moment and thank you for not succumbing to the "clickbait title" trend. You are a champion, and I really appreciate you and your work.
It has actually been a trend dating back to early journalism - just sensationalized/misleading titles to trigger people’s curiosity. Like ‘Every car owner should do THIS if they’re smart’ or ‘I don’t know why more people aren’t doing THIS’. When I go to TH-cam, I like to curate my own experience. When people are vague about what they’re posting just to get me to watch… just feels dishonest. There are plenty of hugely popular folks out there that just do what they do. Doesn’t happen all at once. You have a great vibe and will definitely find more and more success without gimmicks. Cheers
Hope all goes well in the next few weeks
You're right about cheep lumber/free, except for removing nails and staples and sh!t, and stuff. I've gotten upwards of 30 pallets and crates of various sizes and types mostly broken down and de-nailed/staples, and other sh!t, and stuffed, around my outdoor shed. I could easily fill a 10' × 16' shed with lumber of various types (Roughly 3.04M × 4.87M shed).. And didn't cost me a dime, except for getting off my arss, something I already needed to do and get moving and doing/accomplishing something. My wife loves the cool stuff I've made her. Now I'm going to start making stuff for sale and get an LLC.!!! It's not solely because of your inspiration mate' but to you've had no small impact on WoodWorking Hobbyist TH-cam watchers and stuff would be selling you short.
I love it, I would buy it if I had the space for it. Looks anazing
Loved the vid that table looks awesome and I’m sure you will sort out any problems. Loving the idea of patterned pallet wood Also I hope your ok ?
@@dainermade phew that’s good 👍
check square is just one of those 'minor' things. The best outfeed table it is then :)
Dang that top came out looking stunning
At 45° the balde highest point should be material thickness -half tha blades thickness. I guess.
Measured from the table with a square.
Correct me if im wrong.
I think it still looks top drawer bro! Hope you're back at it asap.
I feel like if you staggered the transition between different coloured chevrons on the slab, it would have looked even more awesome. Its a shame you forgot to make the waterfall tall enough though, it looks awesome and there must be loads of people who would love to buy it.
Cheers mate! It’s all good. I will give it a new life soon
Awesome as always
Love it too ❤
To pull reluctant nails first heat the protruding bit with a blow torch etc, this burns the surrounding wood and voila the little shit will pull right out.
Thank you for the video! My first question is: what software do you use to draw your designs?
Just found your channel the other day and love the content! Im just starting on my wood working journey. I picked up a nice pile of hardwood pallets, and have started to disassemble them. Now for my question. All of these pallets are put togethet with helical nails and have destroyed my pallet buster that i built and are putting up a HUGE fight compining apart. Any recommendations to better attack them?
@@dainermade right on, I like his method of using a scissor jack. I'll give that a go for these more stubborn ones for the time being until I can get some heavier steel to make a bigger, better, stronger pallet buster
Parabéns pelo belo trabalho...😊
AWESOME Mark
Awesome, A+...
Nice one Dainsey
That is amazing 👏 😊
Hi Mark, really enjoying the videos so thanks for putting them up. One things that is on my mind is where/how to get my grubby mitts on a pallet buster. I've seen a few online and they look cheap and nasty and the reviews are not encouraging. Bunnings have something for just over $100 but it also looks a bit on the dodgy side and I'm not sure it would hold up under pressure (attempt at humor, sorry). Any suggestions would be appreciated. cheers... Steve
hey Steve, best bet is find someone who can weld well and get them to make a robust one. there is a few on amazon that should be ok though. Cheers mate
Finally a new video ....was already on withdrawal 😁 and then with Sam 🤘🏻Cheers mate
@@dainermade
A new video? I'm excited and looking forward to 👍🏻😊
Done another beauty mate! ))
Youll lose some overall width and a bit of height again but Id just reset your jigs and recut the side off the top at the joint while correcting the angles. Get them all square and 45 and re attach. Not ideal, but probably about the only way to really fix it.
@@dainermade most gucci bit of shed furniture for sure
Freaking awesome. Love the pattern.
To you maybe " Full Business Human", to me "Inspiration Personified ".
Thank you, and best wishes for your break.
Mint clever man
Pure entertainment!
wow, what an inspiration! sub'd!