Turning 40 skateboards and pallets into $1000
ฝัง
- เผยแพร่เมื่อ 23 มี.ค. 2023
- G'day, This one is a dining table made from palletwood, reclaimed decking and recycled skateboards. The question is? Did I charge the customer enough?
Maker Videos to watch..
Morely Kert - • Turning a Free Pallet ...
Jesper Makes - • Turning 2 free pallets...
Andrew Szeto - • Making a $2000 Bench f...
Ben - WOBY Design - • WHY DO I DO THIS TO MY...
WHERE TO GET BROKEN SKATEBOARDS
WOBY Design - • WHERE TO GET BROKEN SK...
MEMBERSHIPS 🙏 (PAST AND PRESENT) Your name will always be here!!!
Thank you Kindly for supporting my channel
CHECK SQUARE CUBED
Dale Cordwell - Delbasid Timbers
Barber’s Paddock Woodworks
Tim Garrett
CHECK SQUARE SQUARED
Brian Tyler - OUTDOORS WITH BT
Francisco Martinez
Gary - Possumhead Carpentry
Glenn - Presto’s Woodwork
Angus Lyons
CHECK SQUARE
James Finger- FIXIT FINGERS
Mario Capellano- THE WOODFATHER
Karl Pope - KARL POPE WOODCRAFT
Paul Williams
Alberto Bressen
Gus Elliot
Geoffrey Nicholson
Mahli Peneamena
Dryer Thackson
Teresa Cole
Mahdi Peneamena
Rich Staniland
Sam Potashnick
Lucas Wincote
Russell Waddington
Peter Middo
Angus Lyons
Clayton Miller
Sin Bin Creations
Martin Stanik
Tim Bankes
Vic Lampert
Brandon Harjer
MrNetable
TH-cam Description
SAFESTYLE EYEWEAR (Affiliate) DAINER10 at checkout 10% off
safestyle.com....
Power Tools
Bosch Bench Drill press - amzn.to/3SCJs0J
DEWALT 1800W 330MM THICKNESSER DW735XE - USA amzn.to/2XfAFqD
Dewalt Router Trimmer - Australia amzn.to/3gxwtud USA amzn.to/2XdFUqY
Dewalt Orbital sander - USA amzn.to/2ZRYEhA
Dewalt Drill driver and Impact driver -USA amzn.to/2TMWmML
Bosch Sliding Glide Miter Saw - USA amzn.to/2XijDsa
Other Tools and useful stuff
Pneumatic Denailer - Australia amzn.to/36LOQGs USA amzn.to/3cirEBm
(the one I need)
Metal Detector - Australia amzn.to/395DzSc USA amzn.to/3gAV0hI
Clamps Irwin Quick Grip - Australia amzn.to/2FIOCDV USA amzn.to/2TPxi7W
Pipe Clamps Australia amzn.to/35R6oPT USA amzn.to/2MegEdW
Wood Work Pencils Irwin - Australia amzn.to/2tdEOz5 USA amzn.to/36J9h7v
10 inch dewalt blade - Australia amzn.to/38WcYXR
Irwin clamps - Australia amzn.to/394YzJb
Stanley 12 inch Square - Australia amzn.to/2Aj1zoK USA amzn.to/2XHaDM5
Toggle Clamps -Australia - amzn.to/2Xe4CpR USA - amzn.to/3gF4nNq (same size, different brand)
Bow Products Push Pro - (push stick) Australia amzn.to/2ZUObSi USA amzn.to/3duCJAE
Bow Products Guide Pro - Feather board - Australia - amzn.to/3dhdphy
Products I use:-
Titebond III Ultimate Wood Glue - 3.785ltr - Australia amzn.to/37Spnuv USA amzn.to/36Se6M4
I have turned on memberships as I became elligable, memeberships really to help support me to keep the channel growing. Appreciate any supprt and am toattly greatful. thank you.
Join this channel to get access to perks:
/ @dainermade - แนวปฏิบัติและการใช้ชีวิต
Mark, I know there is rarely much seriousness in our exchanges so I will preface this comment with a note that there is no sarcasm here. This is the best piece of furniture you've ever made. The design, the thought processes, the clever use of material and the execution are so far beyond the _Pallet Punter_ , I think you have finally graduated to truly being _Dainer Made_ 🤘
@@dainermade don't get used to feeling of smoke on ya freckle. 🤣
Couldn't agree more!
Totally agree with Mr. Fix ❤
Awesome build Dainsy - the sunshine is flowing freely from that rusty bullethole! 😂
@@dainermade haha yeah I had a solid chuckle when you dropped that one in the video….😂….so do you have enough leftover skateboard bits to make a regulation sized ping pong table or what? 😂
🧰🛠🛹 Love the video Mark, Very informative, Cant wait for your next video!
😎😎😎
Awesome way to make money!
The BEST analogy about pricing ever said.!!!!!!!!!!!!!
Just when I'm looking to watch something, you pop up. Magic!
The fact you built this piece in 20 hours is so impressive
well done Mark, $40 an hour is a very good start. The quality of your work will demand more, well, demand. what was once $40 will soon become $400. looking forward to the day.
@@hakone1841All that wood dust is really bad for your respiratory system. Especially with the skate boards which is plywood so there’s glue and paint and who knows what other chemicals you’d be breathing.
WOW
What you can make from wood scraps. what patience and ingenuity
Beauty table mate! You beat them for sure btw!
Great video Marky boy, back to your best production and building, that accent strip of skateboard is something to behold!!
Love your videos, look forward to the next big thing. peace
You have te funiest wood working channel on youtube !! Big fan !
Haha love the story up top of how the skateboards came to you. Big Dave Kelly looks like a legend!
This is absolutely your best video so far Mark! The build, the business side of things, the creativity in editing. I really liked how the skateboard table turned out, and those roundy-roundy things at the end. I paid close attention. Good one!
Beautiful table, Mark - that merbau is gorgeous stuff!
@Dainer Made Right! I've got access to some jumbo pallets, but they're almost all pine (not garbage but definitely not the cool stuff you've got there).
Still always our favorite, Mark. Wicked good!
awesome work keep it up!!
Frequently learn something, always entertained, ALWAYS inspired!!! Thanks for your work and for sharing!!
Financially you did quite well.
Emotionally you should be ecstatic because that is a beautiful build.
The most impressive part is you do all this while being upside down, down there.
Loving the channel. Keep it up.
3 minutes in, and the pacing is great Mark! love this.
Wow, just Wow! That is one awesome build and your skill set just gets better with every build. Also love the way you present your videos. Well done Mark!
I was quite impressed with that table.
Thank you
Good stuff. I suggest a mini paint roller for applying glue for times like this. Huge help and time saver.
That is a beautiful table, mate. Well done. ❤😊
best ....coolest table i've ever seen
Mate that is bloody beautiful, I'm very impressed
Mark , from a pom to an Ozzy , I've gone from no tools , to table saw , and now a able planer , i have a few ideas of my own , but I'm loving your creative ideas
First video of yours I watched. It's incredible!
Nice job, And a bit of a profit.... 😊I often wonder whether these projects can be financially worthwhile. You've proved they can
@@dainermade Cheers
Mark that’s a thing of beauty and genius. 👊
Love it great job
Love the vid Mark. Love the table. You are a Dainer through and through!
Very cool Mark, lovely table in the end. I expected it to be more than 20 hours to be honest, looks like a real pain cleaning up skateboards!
Nice to see another fan of Woby. He was the first guy I saw repurposing skateboarda and he doesnt it bloody well. True master.
I love your style man!
bravery first, building second, love the take on full business human from the last vid carried on. Full steam ahead!
Awesome build, Mark! The pattern looks awesome!
How good Mark your own boss creativity who knows what the future holds as long as you can keep up with pallet supplies love your attitude and people catching onto this likable Aussie cheers
Nice job. Worth the money. Two matching carver chairs and 4 normal matching chairs. Then 5 Grand all day long.
Mark comrade you are knocking all your project out of the park
Continued success brother
That's a great looking table! Well done!
Thanks for sharing your smarterer-betterer breakdown. There may be hope for me yet!
Table Looks GREAT Mark
Mate your videos are foooking amazing , I have been watching for about 3 years and they fill me with joy 🎉🎉😁💪
Great piece for the price!!! I'm even more impressed by the 20 hours you put into it.
Well done Mark. That looks really good
Great stuff. That taperization was what that table needed. The weave is wonderful. Lovely project.
That’s an epic table, sir! Awesome job.
I'm with James on this one, I reckon it's your best piece yet, love the woven look and all the other design elements to put this together. You could easily charge 2k for this too mate.
I agree with Sam!
Great work! Love all the shoutouts to other creators as well.
Great build. Obviously you're not counting everything as a full business but as a side hustle so a note to others who would like to make it their full-time job: apart from adding power, tool wear, rent etc the biggest expense for a business like this is marketing. That is getting customers. It takes time and or money. If you can get that under control you will enjoy yourself no end.
Wonderful!!! Fantastic!! Congratulations from Brasil!!
My god!...what a mission....but what a result!! Amazing mate👍 What a relief when you got that semi circle cut....l don't blame you for those sleepless nights.quoting a job like this is a nightmare and 99.99% of the time...lets call it 100% of the time, we underquote. The trick is to grow some big cohones and quote appropriately which is generally twice the cost of what you initially thought 😂 👍😁🇦🇺
@@dainermade 👍
Dainer Da Joinery Man! 👏👏👏 You did good mate, you did really, really, really bloody good! Should be stoked with a finished product like that
Well done, love watching your videos. Totally inspired so much by your videos, that this retiree is going to give pallet busting a shot.
I really enjoy this channel and it's only my second video, I love your sense of your humor and how genuine you are .
Outstanding table.
what a great looking table
This was definitely the right thing to say "Yes" to. The creative thinking, simple approach to design and final product were brilliant. Beautiful work. Keep it up.
lovely project and content of the video, I woud of love to see more beauty shots of that beautiful piece!!
Nothing wrong with a rando shoutout 😂 Fantastic job Mark. Taperization and chamferization for the win
@@dainermade 😂
Love your work, and vids, Mark. Thanks.
beautiful table love your video"s
In my humble opinion, vineer is Very underrated 😊 Very rich variety of patterns can be created, yet combined with pallete wood. Also Very rigid and not as expensive as some sorts of wood
I totally agree! Cheers mate
This is my favorite build of yours man! Huge fan of your Channel and Morley’s!Hope to level up my content to what you guys are making!!!
Excellent work! Oops great. Your customer had to have been very excited 😁 😊
Again my best woodworker…starting soon hope to join y’all ranks in time
You're all winners in my book! 😁
That was a buttload of fiddling, but it payed off in the end. Well done!
That is a beautiful piece of work will done
Pretty cool build
Keep up the good work 👍
That table looks amazing. Having some of the stripy veneer on the legs ties the piece together nicely.
Well done, love watching your videos.🤓
Unreal build that! Top stuff buddy
Great job dude. Table Looks beautiful ❤
Nice One ..... Handy to have ALL that gear EH?? 🤠
I found Woby years ago. He makes the most awesome shit! His board straightening and gluing clamp/press is pretty nifty too.
Very cool table , well done .
Outstanding Work!!
Nice job mate, bloody looks awesome. And with the leftovers you will have a ball…. Well done mate.
Now hang on Mark. This is all getting out of hand. You started with pallets. Pallets! They usually make them into slightly rubbishy futon platforms, and turned them into "side grain nice looking stuff". But this! You have not made "stuff" you have made ART! This isn't stuff you furnish a flat with, it is stuff you put in Art Galleries! Good on yer from a Pommie Bastard! :) This is mind blowing!
Woo. Celebrate this video!
Bourbon Moth says route out one pass only with a circle jig then cut roughly with a jigsaw and then use the router to clean it up. Is that a thing? I dunno?
Everything is coming together here Mark. Your unparalleled veneering and tessellating eye, your smart and economical use of materials, your engaging story telling, video skills, everything. This build is heartwarming. It was so engaging in fact that my hands were actually scuffed to pieces from all that grip tape removal.
C'mon TH-cam with a bit more effort we can turn this from a side hustle into Mark's full time job because until it is, we are impoverished.
you're awesome and inspiring!
Wow, thank you! Much appreciated mate
1st class job on the build and the video 👍
This is amazing Sir! Makes me wanna build something right away
Very cool!
Thank you 🙏
Wow! What a beautiful table. Very entertaining video there Mark. Nice one! 🙂
You did a dammm fine job of it !
The ingenughts (cross between ingenuity and thoughts) inside your brain blow me away. This is what I love about your channel. If there isn’t a process for something you need the wood to do or in this case skateboards. You invent a way for it to Collapse under your will. Great job Mark
@@dainermade I'm not quite sure how to pronounce it but feel free to use it no charge. 😂
Great build and great content. Well done!
Amazing job absolutely brilliant build definitely "said yes to the right things" more of this random stuff please
@@dainermade Good to hear... Look forward to seeing what you come up with next!!
You're true master, keep up the great work.
Absolutely awesome video
Brilliant build. Great video breakdown of the build. Legend status achieved without doubt.
Luv ya table. Hint #1: For your semi-circle ends, make up a single template of a single sector, then use a pattern bit in the router to cut individual boards. Then stagger the boards, brick pattern, as you laminate them. Much stronger structurally. Hint #2: For your top laminating, it is relatively easy to put together a vacuum bag (6 mil plastic and quality joining tape with a clothing vacuum bag valve) to enclose even door-sized objects, and a small vacuum pump is pretty cheap, if it’s going to be used more than once.
Awesome job mate looks incredible
I've said it before and I'll say it again you my friend are a Bloody Legend 👏👏👏
Beautiful table.
Greetings from Iraqi Kurdistan. Love the videos. Mainly working with Russian pine pallets here. Schooled in Charters Towers.
Nicely done Mark! Another great project my friend. Thank you for sharing.
Looks awesome great job
I subscribed for your story videos and beautiful creativity!!!
This table looks amazing. If the is what 'business human' looks like, I can't wait to see what comes next!