9:00 Go back to the store and buy proper screws 8-32 x 3/4" flat head. All the Japanese joysticks use M4 x 16 metric machine screws in flat head or carriage bolt. You used the correct flat head wood screws to fasten your box together. If you want to use pan head screws then you need to counter bore and not counter sink.
Nice look. I'd have gone with IL just for the color-matching dust washer. That said, Focus Attack is now selling washers. Also, 30mm is a bit wide for Happ or IL buttons they're fitted for 1 1/8", or 28mm.
Was the wiring okay for you? The diagram did not specify which wire in the premade harness is the ground. When dealing with arcade controls I’m used to working with a common ground, so this is new to me.
Is it possible to attach a Sanwa joystick with 2.8mm harnesses and 5 pin connection alonogside american style 4.8mm pushbuttons on the same USB encoder?
I know its been ages since you've uploaded but would you be able to tell me how to connect that micro switch button to the raspberry pi nad what wires you need
Check out Amazon.com. They have matching parts. I added an acrylic case since I didn't have a wooden box, for an extra $20, so total to include six buttons, joystick, zero delay encoder, and case was about $65. Not bad.
Team JPB so are they just used for playing arcade roms (interchangeable with the “coin” button)? I’m assuming the start button then doesn’t work for that purpose.
Finally I've found the piece of data I needed on how to dismount the switches from the buttons.
Sweet :D build on!
I want a follow up of this video, and see it working! Good job
Stay tuned and you will see it in the next coming videos :D. Thanks for stopping by and for the support :D Keep on keeping on
I like the design.... i just would have went with IL joystick and buttons .
9:00 Go back to the store and buy proper screws 8-32 x 3/4" flat head. All the Japanese joysticks use M4 x 16 metric machine screws in flat head or carriage bolt. You used the correct flat head wood screws to fasten your box together. If you want to use pan head screws then you need to counter bore and not counter sink.
Thanks for making this video bud I thought this process was extremely complicated but you made it look pretty easy!
Nice look. I'd have gone with IL just for the color-matching dust washer. That said, Focus Attack is now selling washers.
Also, 30mm is a bit wide for Happ or IL buttons they're fitted for 1 1/8", or 28mm.
Soo,cool!I wish i can make one.
If you put your mind to it and really try you can make one as well! :D
Can I use it to plug into an android emeulec instead of a raspberry to use it as controls.. I would assume so?
Was the wiring okay for you? The diagram did not specify which wire in the premade harness is the ground. When dealing with arcade controls I’m used to working with a common ground, so this is new to me.
Hi... a very nice video. What’s the width of the wood? Thanks
Hey I used .25 inch mdf board or 1/4 inch thick if that is what you mean
Super cool video, can you make more content like this?
Is it possible to attach a Sanwa joystick with 2.8mm harnesses and 5 pin connection alonogside american style 4.8mm pushbuttons on the same USB encoder?
That USB encoder also has a 5-pin connection.
how did you make the case ?
I got it laser cut from a company after sending in dimensions
I know its been ages since you've uploaded but would you be able to tell me how to connect that micro switch button to the raspberry pi nad what wires you need
Where did you buy the stuff? Buttons, encoder Etc..
Check out Amazon.com. They have matching parts. I added an acrylic case since I didn't have a wooden box, for an extra $20, so total to include six buttons, joystick, zero delay encoder, and case was about $65. Not bad.
Where did you get that circular USB extension thing ? Would love to know thanks!
www.amazon.co.uk/Bolongking-Panel-Flush-Extension-Motorcycle/dp/B06XJ3KKVJ/ref=sr_1_3?keywords=usb+extension+car&qid=1579453732&sr=8-3
I noticed they all use Cherry-brand switches. You get the parts from Tornado Terry?
can you explain the purpose of the player one and player two buttons? I am having trouble finding what those are for.
Ryan Meek start buttons for each game
Team JPB so are they just used for playing arcade roms (interchangeable with the “coin” button)? I’m assuming the start button then doesn’t work for that purpose.
Ryan Meek they are used for every game to press start
Actually, yeah .. Why have a 2P button for what is clearly a 1 player cab?
Hi, where can I find the usb extensions that you installed?
www.amazon.co.uk/Bolongking-Panel-Flush-Extension-Motorcycle/dp/B06XJ3KKVJ/ref=sr_1_3?keywords=usb+extension+car&qid=1579453732&sr=8-3
hey im putting together my first joystick and i was wondering after i map them retropi i can i use it on my Xbox one for King of fighter 2002
OFF KEY yes you can
where did u get the wood for the box?
neato!
Thanks :D Have a beautiful day :D!!
What's the point of having a player two button with only one Joystick
You can add a usb controller
Hey Nerd :)
Howdy
Why does his voice sound just like Michael J Fox???