What is JAMMA and how does it work?

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น •

  • @Ghostie.
    @Ghostie. 3 ปีที่แล้ว +1

    Thanks, I work in an arcade and use your videos from time to time.

  • @Casper_Brisbane
    @Casper_Brisbane 5 ปีที่แล้ว +8

    hi mate im in Australia and doing my first machine , appreciate your video

  • @AXL398
    @AXL398 7 ปีที่แล้ว +2

    Thank you for the video, good sir. As a dentistry student, I'm not really much into technology but your video helped this dummy greatly to get a general understanding.

  • @levelbylevelgaming2833
    @levelbylevelgaming2833 5 ปีที่แล้ว +1

    Im now on my second arcade on my channel Level By Level Gaming and I cant say enough how helpful your channel has been, thanks

  • @kb9khm
    @kb9khm 6 ปีที่แล้ว +3

    The -5v connection is not "earth 5 volts". It is a -5v supply. It is 5 volts *below* ground. If you were to use a volt meter and measure between +5v and -5v the reading would be 10 volts. -5v is used by some older dedicated boards and is required by the old 4116 DRAM chips.

  • @BeholdJesse
    @BeholdJesse 5 ปีที่แล้ว +1

    Thank you for these videos, very useful for newcomers

  • @Sniperkag
    @Sniperkag 7 ปีที่แล้ว +5

    Thanks. This was exactly what i was looking for.

  • @gruffbikerdude1206
    @gruffbikerdude1206 6 ปีที่แล้ว +4

    Thanks for the advice dude! Actually looking forward to starting my own arcade project now!

  • @mrawesome2742
    @mrawesome2742 2 ปีที่แล้ว +1

    Hi! Do you know if they make a JAMMA to Playstation 4 or 5 converter?

  • @DanielFrankDK
    @DanielFrankDK 6 ปีที่แล้ว +4

    Very informative. I just got my own first arcade machine. A Mortal Kombat II which have had a new jamma board with Tekken III on it. I think the monitor is broken so I'm gonna subscribe to learn how to get it fixed up.

  • @xAZN-UAE_Legendx
    @xAZN-UAE_Legendx 3 ปีที่แล้ว +1

    Please help me wire the speakers in the arcade cab.

  • @erikgarston1395
    @erikgarston1395 5 ปีที่แล้ว +1

    HI, can you supply all the hard ware to make a unit?

  • @jokohews
    @jokohews 3 ปีที่แล้ว

    Is there a specific board for vertical.. you mentioned the monitor orientation..

  • @AkebonoRadio
    @AkebonoRadio 8 ปีที่แล้ว +2

    Just found your channel, very informative video as I'm new to arcades. Going to watch all your videos. Thank You!!!

  • @LeToroPicana
    @LeToroPicana 5 ปีที่แล้ว

    Thanks for the video Learned a lot. i thought the jamma connector was a cartridge. Very insightful video good work

  • @RetroactivearcadeCa
    @RetroactivearcadeCa  8 ปีที่แล้ว +7

    For more information on all of our arcade parts, arcade cabinets, arcade kits and pricing, please visit our webpage at:
    www.retroactivearcade.ca

  • @perfectgamer4728
    @perfectgamer4728 5 ปีที่แล้ว

    pandora box 5s in my arcade machine plugged into the new pandora box only if I remove the box will work?

  • @wardogdauwdd3020
    @wardogdauwdd3020 ปีที่แล้ว

    Do you know which I can flash games onto like a gameboy or nes game onto them

  • @jamesdoherty5105
    @jamesdoherty5105 4 ปีที่แล้ว

    I am in the middle of try to wire up a jamma harness to my arcade 1up mortal combat cabinet, I am confused what colour of wires go to the high kick , high punch,block, low punch,low kick, and the run buttons buttons etc any help would do, I’ve managed the joy sticks no problem
    Many thanks Jim

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว

      Hi James, Please refer to our diagrams page, the Jamma harness diagram you need it the first one on the page. retroactivearcade.ca/pages/videos-diagrams

  • @AlexanderSmith21
    @AlexanderSmith21 6 ปีที่แล้ว

    What harness would you say is the best and which is easiest to wire up and do you get a paper diagram so to wire it up

  • @deanstuder1775
    @deanstuder1775 6 ปีที่แล้ว +1

    KC great video however I just got a vintage non jamma PCB of my favorite game and it was sold as working but minus cabinet and screen. Have wiring harness and a jvl KIT-BR SERIAL NO BR-0306-600198 Made in Canada. No manufacturer date. It has USB and lan ports , among others, so not antique? Have only found one video on non jamma and it was not even in english. Any idea where I could learn enough to get this running?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Hi Dean, I cannot say for sure how to connect your board but you can find a ton of help through an arcade forum called KLOV, there are a ton of manuals and schematics on there as well. You can post pics of your board to find out what you have and then download the schematic that will show you how to wire it. There are also a ton of groups on Facebook that will love to help you with all that stuff! You should be able to find a group local to your area as well.

  • @C4_84
    @C4_84 8 ปีที่แล้ว

    Thanks for the video and exclamation. Will definitely be checking out more of this channel.

  • @indangerdogg637
    @indangerdogg637 4 ปีที่แล้ว

    Thanks A lot , I'm just starting to build arcades and this video is so much help..!!

  • @tim-3902
    @tim-3902 4 ปีที่แล้ว

    Does the 2 in 1 switcher work with say a CPS1 hyperfighing board and a Pandora 5 being hooked up?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว +1

      The switcher will not work with either one of those boards, it will not recognize the 5 & 6 buttons for either player and it will not produce proper sound.

  • @jpstanley08
    @jpstanley08 3 ปีที่แล้ว

    May I know how to connect a USB joystick to JAMMA harness? I just have the arcade board without the cabinet and I already found a RGB to VGA converter. Hopefully you can share your experience with me.

    • @NZdjsphericaL
      @NZdjsphericaL 3 ปีที่แล้ว

      I'd think u just download the diagram for jamma and u wire the buttons and joysticks directly off the jamma harness, no USB or o delay encoders needed etc for Real Game board, or if it's a PC etc just plug it in the usb port and dont wire the jamma controllers..all the best from NZ

  • @edoog2994
    @edoog2994 7 ปีที่แล้ว

    About 12 minuets in to the video you talked about de-soldering and adding wires to put volume control on the outside. such a great idea by the way. what Ohm pot did you find works best?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      ethan sanders-divers it is a 5k pot

    • @edoog2994
      @edoog2994 7 ปีที่แล้ว

      thanks man that relay helps

  • @brightnovastar
    @brightnovastar 3 ปีที่แล้ว

    Very informative. Thanks for the video.

  • @bigdogrcsracing
    @bigdogrcsracing 5 ปีที่แล้ว

    I have a question I have a Golden Tee 99 and I want to know can I put a 60 in 1 multicade bored in it what would I have to change out and I know that I would probably lose my Golden Tee game by doing the process or is there a system that also has Golden Tee Golf on it and other multiples I've been trying to look into the Pandora's Box 5 but I do not know where I can go to find out list of games that are on different formats can you help me

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      Hi, yes I can help. If you want to keep Gold Tee you will have to go with the 2019 or 3016 game board. They are all Jamma but those are the only ones that support and have Trackball games in them. The Pandora's box does not support a trackball. You will also need a PS2/USB adapter for your existing trackball to work with the, Jamma board or buy a new one that is PS2/USB. The adapter can be found on the Suzo Happ website. Here is a link to the different game boards that we offer and the their game lists.
      retroactivearcade.ca/pages/game-lists

  • @briancesafsky9401
    @briancesafsky9401 4 ปีที่แล้ว

    I'm building an cocktail cabinet and I'm trying to decide between Jamma and Mame... For a game like pacman when there are 2 players on the cocktail cabinet the view will "flip" for player 1 and 2 when it's their turn. I know Mame has settings to handle the flipping of the screen, does Jamma handle that scenario?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว

      Jamma is set to a default to do the automatic flip for you on 60-in-1 and 412-in-1 that are vertical games only. If you are looking to have 2 player games like Street fighter and also having cocktail games that is a whole different scenario.

    • @briancesafsky9401
      @briancesafsky9401 4 ปีที่แล้ว

      @@RetroactivearcadeCa Thanks for the quick reply! I'm just looking to do Pac-Man, Ms Pacman as my main games, everything else is just a bonus.
      I do have another question. I have information overload when it comes to picking the best monitor for the cocktail cabinet. What I will probably go with is this:
      www.hollandcomputers.com/store/pc/19-Inch-Arcade-Game-LED-Monitor-Jamma-monitor-MAME-and-Cocktail-game-cabinets-p6003.htm
      But since you so kindly replied, do you sell a comparable monitor I could buy from you, or have any advice on what I should use?

  • @briandoyle1168
    @briandoyle1168 7 ปีที่แล้ว +1

    do you need the power switch or can you just find a plug in charger for the jamma

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว +2

      Brian Doyle you can use whatever you want as long as you have a regulated +5V, +12V & ground power supply all connected at the same time.

  • @coldspringsgolfpro
    @coldspringsgolfpro 4 ปีที่แล้ว

    I plugged my 412 elf in and I get a blank screen with some horizontal lines and no volume. What am I doing wrong?

  • @NBUltra187
    @NBUltra187 6 ปีที่แล้ว

    stupid question...where are the games stored...on the hard drive or the jamma board itself?

  • @homefront3162
    @homefront3162 5 ปีที่แล้ว +17

    I'm a bad Mama-Jamma

  • @Zafer-me3hq
    @Zafer-me3hq ปีที่แล้ว

    Birşey sormak istiyorum.bu orjinal jamma boardin yerine gelen bir ürunmü? degilse günumuzde yerine gelen bir urun varmi?pandora box kesinlikle ayni kalite degil.ilginç 30 sene önceki kaliteyi yakalamayimiyoruz.orjinal jamma kartinin tepkimesi hicbir kartta ve emulatorde gormedim.siz biliyorsaniz yaridmci olurmusunuz?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  ปีที่แล้ว

      Bu JAMMA panoları (Pandora'nın Kutusu), Jamma PCB tarzı panoları kullanan tüm atari kabinlerinin doğrudan yerine geçmez. Bunlar yalnızca 28 pimli kablo demetinde 12V ve 5V güce izin verir. panoya 12V ve 5V dışında herhangi bir güç sağlayan veya farklı bir pin sayısına sahip mevcut bir kabininiz varsa, çalışmayacaktır. Kablo demetini ve muhtemelen gücü de değiştirmeniz gerekecektir. Kaliteye gelince, tahtalar gizlidir, yükseltilebilir ve yüksek puanlar kaydetmenize ve hatta bazı modellerde tom eklemenize izin verir. Gerçek hame'lere ve oynanışa gelince, bunlar vurulur ve ıskalanır ve daha büyük bir ekranda görüntülenmek üzere kenarları yumuşatmak için yükseltilmiş grafiklere sahiptir. Bence insanları onlardan uzaklaştıran da bu. Bu yardımcı olur umarım?

    • @Zafer-me3hq
      @Zafer-me3hq ปีที่แล้ว

      ​tahtalar gizlidir yükseltilebilir nedemek anlamadim çok basit bir anlatimla bu elinizdeki cihaz eski orjinal jamma kart tepkimesine sahipmi degilmi onu öğrenmek istiyorum tesekkurler şimdiden..

  • @gabrielstudios1265
    @gabrielstudios1265 2 ปีที่แล้ว

    Where did you get the wiring harness on the right?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  2 ปีที่แล้ว

      From our store at www.retroactivearcade.ca

    • @gabrielstudios1265
      @gabrielstudios1265 2 ปีที่แล้ว

      @@RetroactivearcadeCa do you sell the one with the quick connects already on it?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  2 ปีที่แล้ว

      @@gabrielstudios1265 you bet!

  • @StreetFighter2010
    @StreetFighter2010 7 ปีที่แล้ว +5

    How do they actually load the games onto these boards?

    • @graymancharge
      @graymancharge 6 ปีที่แล้ว +1

      one does not simply ask how to put games onto a mame arcade......
      (the answer isnt exactly legal advice)
      google is your friend

    • @Eff_One
      @Eff_One 6 ปีที่แล้ว +2

      The board WAS the game back in the day; one board, one game.

    • @gruffbikerdude1206
      @gruffbikerdude1206 6 ปีที่แล้ว

      As it should be.

    • @Rick-bc2ds
      @Rick-bc2ds 6 ปีที่แล้ว

      @@graymancharge "Google is your friend" I think you missed the part where the guy said there wasn't much information out there except for trial and error.

    • @chivalryhonestylovintender1525
      @chivalryhonestylovintender1525 6 ปีที่แล้ว

      @Graham Charge: Shut up dummy. You talk stupid.

  • @saksvgm7919
    @saksvgm7919 4 ปีที่แล้ว

    anyone know of a site that allows you to customize what games you want on your jamma board and they'll burn the games to it? i feel like it has to be an option somewhere.

  • @jayj4601
    @jayj4601 4 ปีที่แล้ว

    I bought a game and it has the 60 games guruss the sound sucks how can I fix it

  • @Sam-Lawry
    @Sam-Lawry 7 ปีที่แล้ว +2

    Hi,
    Maybe you can help me.
    I just bought a Pandora 4S pink to play on my Combo a.v.
    But,nothing,just a redlight inside.
    (somes says that about the 12v/5v so needed a adaptator).
    Before that I played Demon front and Elf without problems.
    Thanks

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      fatalfury1994 how did you connect it?

    • @Sam-Lawry
      @Sam-Lawry 7 ปีที่แล้ว +1

      Retro Active Arcade Ltd.™ first on jamma with rgb peritel,after on vga and hdmi...
      I will try with a Astro city soon.

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว +1

      fatalfury1994 I'm pretty sure that the Pandoras box 4 will not convert to the RGB CRT. It is only vga and hdmi.

  • @SupraB007
    @SupraB007 6 ปีที่แล้ว

    So I just picked up a prebuilt Cocktail arcade with a 412-1 Elf Jamma board. The problem is the board does not boot to the game select screen. It keeps rebooting and says “No cable” and shows the elf boot screen. Any idea what’s the issue before I return it? Is there a pin out issue (28 ground)? I swapped out the board with an identical 412 and it still has the no cable message initially and then goes into safe or saved mode and boots into the game screen but the controller one joystick doesn’t work. Does it have to be configured?
    Main question is, is this a jamma connection issue or a board problem? I looked online and can’t see anyone have a No cable messaging issue. Thanks for your help and posting this very informative video :)

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      ChicagoBulls2007 hi, this means 1 of 3 things, there is a short in your wiring (bad ground), you have high/ low voltage for 5v and 12v or your sd card has shaken loose during transport. While powered off, take the sd card out and put back in tightly. The sd card is in the square cap on the side of the jamma board case. The rest you can check with a multimeter.

    • @SupraB007
      @SupraB007 6 ปีที่แล้ว

      Retro Active Arcade After Turning it on last night I’m
      Seeing this: No Cable message > Enter Power Saving Mode and then a blank screen.
      Majority of the times I just see > No Cable > Elf logo and it just loops.
      Is this a grounding, power issue? I’ll check the DC/AC voltage later this week. I did swap out the 412-1 board with another one a few weeks ago and I’m still getting that going into power saving mode and the P1 joystick is not responsive. But player 2 works.

  • @davidkennedy5836
    @davidkennedy5836 2 ปีที่แล้ว +1

    Thanks so much!!

  • @dimitrisstylianou7167
    @dimitrisstylianou7167 7 ปีที่แล้ว

    I have the same 2019 in 1 pc jamma winit whatever board.the hard drive failed.do you know what the software is called or any alternative software i can use to reinstall on a new drive?thanks

  • @revan4130
    @revan4130 7 ปีที่แล้ว +1

    Hey guys I have a question. I’m about to purchase a Galaga style arcade cabinet that has a jamma board in it and Galaga 88 (Galaga 2) is my favorite game of all time. I know jamma doesn’t have that game so is there any way I can somehow install this game into the cabinet? Or do I have to buy another board? I know very little about arcade cabinets but I have to have my Galaga 88

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว +1

      Blake Hunter we have Galaga 88 in our signature series arcades! We can also design it as Galaga 88 for you!

    • @revan4130
      @revan4130 7 ปีที่แล้ว

      Retro Active Arcade I’ll check that out, thanks!

    • @revan4130
      @revan4130 7 ปีที่แล้ว

      Retro Active Arcade could you link me to it?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      This is a link to the game list: oactivearcade.ca/content/2700_Game_List.pdf
      This is the link to the Signature seris machines (Brute, Monster, Beast & the Pedestal): retroactivearcade.ca/arcades-1/

  • @murrij
    @murrij 4 ปีที่แล้ว

    This is great. Thank you for sharing your knowledge.

  • @icybottoms3881
    @icybottoms3881 6 ปีที่แล้ว

    i have a classic mortal kombat 1 cabinet that was made in 93. is there anyway that i would be able to turn the cabinet into a multicade cabinet with games of my choice?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      icybottoms007 you can convert it to jamma if you want fairly easily, your game choice will be subject to the game board game list. They are set lists and cannot be changed

  • @stephengiacobozzi7785
    @stephengiacobozzi7785 3 ปีที่แล้ว

    what game board do you have now it is 2022

  • @justinp2129
    @justinp2129 4 ปีที่แล้ว

    Good afternoon, I have captain America and the avengers but want to switch the board with a multi game board...is this possible? I'm looking to see what I'd need

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว

      Really all you need is the board and I would pick up a universal jamma harness to replace the wiring if I was you. I would also replace the arcade power supply if you have an original in your machine. You will also need a vga/hdmi to cga converter if you have an original tube monitor CRT.

  • @SpiritsOfWarding
    @SpiritsOfWarding 7 ปีที่แล้ว

    I need some HELP!!! I have a Panasonic Plasma with RGBHV connections. I've been searching and bashing my head as to how I need to wire the Jamma output to those connections. Do I need to patch the ground into each cable is my biggest question. Any help would be appreciated.

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      Are you trying to use the CGA video off of the Jamma harness to connect to an HD TV? That will not work directly, your only option will be a CGA to VGA/RGB converter that will give you those options.

    • @SpiritsOfWarding
      @SpiritsOfWarding 7 ปีที่แล้ว

      This is a professional plasma monitor. Basically, a plasma PVM. It has RGB and HV syncs with BNC. 5 connectors to create the signal with the lower kHz rating.

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      That is a bit beyond my expertise but your RGB and ground is straight forward, with 1 white wire left over we usually have to tie in both HV syncs to it and that seems to work.

    • @SpiritsOfWarding
      @SpiritsOfWarding 7 ปีที่แล้ว

      Ok. Thanks for the help. I may split a few cables and try it multiple ways. I'll let you know how it turns out.

  • @graymancharge
    @graymancharge 6 ปีที่แล้ว

    can you make 4 player console for a bartop cabinet?
    (size isnt a problem... Im gonna be using a 32" screen anyway)

  • @21Studios_tk
    @21Studios_tk 6 ปีที่แล้ว

    Question for you. Can buttons be added to Jamma harnesses? What I mean by that, my cabinet is for a 4 player turtles in time but I want to switch it to WWF wrestlefest. The game comes on but I can't start the game because the cabinet doesn't have a start button. Thanks for the help.

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Yes you will have to add a start and a coin button for each player if your not already wired into the coin door.

  • @mikerhoads4864
    @mikerhoads4864 7 ปีที่แล้ว

    will the Suzo Happ "Super" Jamma Harness be good if i want to use Street Fighter 2, or MK jamma boards down the road ? It says the "item supports 16 switches"...Thanks !

  • @ruggeropiazza2157
    @ruggeropiazza2157 7 ปีที่แล้ว

    Connecting joystick and buttons through jamma to the motherboard is it producing less lag then USB decoding?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      A Jamma board cannot accept the input of a USB encoder, it is a friction fit 28 pin fingerboard right on the PCB, technically it shouldn't have any lag at all. The only things that cause lag on a Jamma board would be the microswitches and the processor on the PCB, there is nothing to encode.

    • @ruggeropiazza2157
      @ruggeropiazza2157 6 ปีที่แล้ว

      Retro Active Arcade do you suggest to use jamma connection or I can go straight to the motherboard's USB port using USB decoder?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Ruggero Piazza if you are using a Jamma board you Have to use a Jamma harness, if you are using a computer you Have to you use an encoder.

    • @ruggeropiazza2157
      @ruggeropiazza2157 6 ปีที่แล้ว

      Because I'm wondering what is the best solution with the pandora's box motherboard. I was thinking to go straight into the USB using a usb encoder rather then using the pin connector but from what I can see from videos it seems to be pretty much the same because I need to wire everything in the same way. So I was just wondering if adding a usb encoder in the process and go through USB port make any difference at the end. Thanks for your answers and your patience btw. Very good channel!!!!

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Ruggero Piazza the Pandoras box is a Jamma board, the USB ports do not work for anything, they are decorative at this point, you can only use a Jamma harness, you cannot use an encoder at all.

  • @mavsonline
    @mavsonline 5 ปีที่แล้ว

    Hi im very new to this arcade machine, just wanted to know do they make a pcb like Pandora's box 3 for car racing game?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      I'm sorry but the Pandora's box is only made for 1 & 2 Player arcade games that are not driving or shooting games. The game list consists of mostly fighting games.

    • @mavsonline
      @mavsonline 5 ปีที่แล้ว

      @@RetroactivearcadeCa is there something out on the market for a multi car racing game all in one unit? Similar to the pandora box?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว +1

      Not that I know of, you would have to set up your own PC and use a #hyperspin type of frontend to run the roms yourself.

    • @mavsonline
      @mavsonline 5 ปีที่แล้ว

      Ok cool thanks for that information

  • @jondoyon
    @jondoyon 3 ปีที่แล้ว

    do the jama multi boards use actual arcade dumps?

  • @WPGinterceptor460Interceptor
    @WPGinterceptor460Interceptor 7 ปีที่แล้ว +25

    0:57 no they didn't use jamma from beg of time!
    What happened was, each cabinet was built specifically for each game.. as games got more popular and more games coming out they decided to make it easier to swap games in cabinets INSTEAD of ordering new cabinets every day!
    this way they can use 1 cabinet and switch games using the JAMMA connector.. jamma was made to make games universal to use in different cabinets!
    ex: lets say you got a donkey kong game and nobody wanted to play it anymore.. BUT time pilot was the game everybody wanted!
    instead of getting rid of the cabinet and having to order time pilot cabinet.. WITH THE JAMMA CONNECTOR, you could just order the Time pilot pcb board game, and when it arrives in 2-3 days...switch out the pcb board game from Donkey kong to Time pilot.. 5 mins and you could have time pilot in the donkey kong cabinet!
    that's the history of jamma!!!!

    • @MobileDecay
      @MobileDecay 7 ปีที่แล้ว +2

      WPGinterceptor Triggered!!! 😤😤😤

    • @Hellwyck
      @Hellwyck 7 ปีที่แล้ว +8

      ...or he knows the correct information?

    • @yumishindou5705
      @yumishindou5705 7 ปีที่แล้ว +4

      And then snk thought jamma boards were too large, maybe too risky to install, so that's where neo geo cartridges begin

    • @travlr7618
      @travlr7618 6 ปีที่แล้ว +1

      True, but ironically neither DK or Time Pilot are JAMMA ;)

    • @austinreed7343
      @austinreed7343 6 ปีที่แล้ว

      WPGinterceptor
      JAMMA was later made even easier by companies such as Capcom and SNK, who had boards that would use individual cartridges that could be swapped easily.

  • @Tclans
    @Tclans 8 ปีที่แล้ว +2

    Nice and informative video, thanks!

  • @LasseSrnes
    @LasseSrnes 5 ปีที่แล้ว

    My video orientation is always horizontal. I cant get it to show the screen vertical. on our arcade. Any tips?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      If you are using a JAMMA board then the only ones that display in Vertical are the 60 & 412-in-1 and the 1162 does both. The rest that are out there display in Horizontal only and will letter box with side bars to adapt to your monitor. You cannot just change the output on a JAMMA board to work either horizontal or vertical, they are pre-programming to display the way they are intended.

  • @slamblambacid
    @slamblambacid 7 ปีที่แล้ว +1

    Why some power supplies come with 24v connector ?? What is for ??

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว +3

      Slam Blambacid those power supplies are for replacement of older arcade machines and pinball machines. The new multi game jamma boards mostly only utilize the 5V and 12V of your power supply so that is all you need.

  • @hbtpugblack
    @hbtpugblack 4 ปีที่แล้ว

    How to update it or remove some games?
    Thanks 👏

  • @FLDawg71
    @FLDawg71 5 ปีที่แล้ว

    I have the 60 in 1 card,,,,any idea why in my centipede it fires by itself,,,I want to fire manually

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      You will have to go into the settings menu and switch it. Follow the instruction guide to figure out how to do that.

    • @FLDawg71
      @FLDawg71 5 ปีที่แล้ว

      @@RetroactivearcadeCa it fires automatically when the track ball is hooked up,,,there's no setting to change for this...any other ideas???

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว +1

      That means you definitely have a short for your "A" button, check all your connections again and make sure your ground wire is on the bottom prong and your action P1 A wire is on your middle prong of your microswitch. The third third prong is always open/ on so that would create the problem you are having.

    • @FLDawg71
      @FLDawg71 5 ปีที่แล้ว

      @@RetroactivearcadeCa the 1p (fire) button works for all the other games fine,,,,

    • @FLDawg71
      @FLDawg71 5 ปีที่แล้ว

      You were right I had a short in a wire,,,,thnx so much for your help..

  • @jeffrielly
    @jeffrielly 6 ปีที่แล้ว

    Are there any jams boards that have everything from beyond Mame, Final Burn Alpha and sega model 2? I tried to get the other arcade emulators to work on my pc, and no matter what it is I keep running into errors on everything else :( I really want stuff from 2000 and beyound, and all the stuff that will not run in mame or final burn alpha :(

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      babada jamma boards will only have games that would be on the mame list, nothing really newer than 2005.

    • @jeffrielly
      @jeffrielly 6 ปีที่แล้ว +1

      yeah I'd want one that runs Sega Model 3, Naomi, early Atomiswave, early Hikaru, and Naomi 2 as those are the ones that no matter what I try to do I just cannot figure out how to get the games running

  • @nashpotatofamily
    @nashpotatofamily 5 ปีที่แล้ว

    Fantastic video. Very informative. Is there a setting on the 60-1 that will keep high scores saved?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      Yes there is, is been a while since I have looked at that setting but I think it is set to on by default....... I may be wrong but the setting is in the menu for sure.

  • @hondaatc1987
    @hondaatc1987 5 ปีที่แล้ว

    Building my first Multicade out of a 1989 Final Fight, restoring and keeping the cabinet original but installing a 1299 Pandora with a 16x13 LCD Monitor do I can still use the original Bezel.. this is fun!

  • @joaopaulobortotsoares3933
    @joaopaulobortotsoares3933 7 ปีที่แล้ว

    Wow,nice tutorial! Keep the good work

  • @ilovekatsumi
    @ilovekatsumi 5 ปีที่แล้ว

    Where do i insert game on? Or how to connect to tv and usb controller?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      JAMMA does not connect like that. You will have to buy a JAMMA to USB converter and a CGA to VGA converter for the video.

  • @BIGMIKE360AMUSEMENTS
    @BIGMIKE360AMUSEMENTS 6 ปีที่แล้ว +2

    I wish Asteroids was on the 412 game elf !!! I’m waiting for my 621 game elf so I can upgrade for my cocktail arcade

  • @hkprefab
    @hkprefab 5 ปีที่แล้ว

    Really helpful to the uninitiated!

  • @TheTukTuk2008
    @TheTukTuk2008 6 ปีที่แล้ว +1

    Well the Raiden PCB uses -5V for sound. If you cut it off, it wont work properly and you will have a hard time figuring out why... just keep -5V👾

  • @ahigadfa5952
    @ahigadfa5952 7 ปีที่แล้ว +1

    can you show me how to set up pandora box 4 plz

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      What do you mean by set it up?

    • @ahigadfa5952
      @ahigadfa5952 7 ปีที่แล้ว

      i i trying to put it in a bartop but i dont know what goes where

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      Have yo looked at our Jamma harness diagrams yet? Here is a link to all of them. retroactivearcade.ca/diagrams/
      We also have a tutorial on how to connect your wiring to an arcade power supply.
      retroactivearcade.ca/videos/
      If you cannot find what you are looking for there I suggest looking directly at our TH-cam channel for all our videos.

    • @ahigadfa5952
      @ahigadfa5952 7 ปีที่แล้ว

      thank you

  • @homefront3162
    @homefront3162 6 ปีที่แล้ว

    I have been meaning to look into this for years... looks like it is time to spend some money

  • @nac4965
    @nac4965 5 ปีที่แล้ว

    I currently have the 1 in 60 board from BLEE and want to upgrade to the 412 board- is it simply plug & play? can I just unplug the 60 board and the 412 is good to go?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  5 ปีที่แล้ว

      Yes it is a simple plug and play exchange, you need the 4,5 & 6 buttons on Player 1 to make most changes in the menu, but the default settings are usually good for most people.

  • @JohnCutePussywhipped
    @JohnCutePussywhipped 7 ปีที่แล้ว

    Do you have cabinets for sale????

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      we sure do!: retroactivearcade.ca/arcades/personalized-arcades/

  • @sangaley
    @sangaley 6 ปีที่แล้ว

    where to find drivers for jammya

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Александр Сангалеев what do you mean by find drivers? There are no drivers for jamma it is a set wiring/pinout standard from the 80's. There boards are set to that wiring standard and cannot be changed.

    • @sangaley
      @sangaley 6 ปีที่แล้ว

      maybe I asked the wrong question. I need to play panic museum (TTX2). The game itself is there but does not see an I / O board and a gun board.

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Александр Сангалеев there are no drivers needed, you do need the right power and voltage connected to the Jamma harness in most cases unless you are providing power to your controls/board through another source. The game might still power up without that but it will not recognize the controls. Are you using a multi game jamma board or is this a dedicated pcb?

    • @sangaley
      @sangaley 6 ปีที่แล้ว

      you do not mind talking to the email

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว

      Александр Сангалеев not at all, email me you like

  • @JohnCutePussywhipped
    @JohnCutePussywhipped 7 ปีที่แล้ว

    Hello sirI'm not familiar with Jamma Pandora boxCan I connect Jamma Pandora box to my tv

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      The Pandoras box has an HDMI out so yes it can be connected to your TV

    • @JohnCutePussywhipped
      @JohnCutePussywhipped 7 ปีที่แล้ว

      I don't have the Pandora box sir
      All I have the Jamma box

    • @JohnCutePussywhipped
      @JohnCutePussywhipped 7 ปีที่แล้ว

      Is the yellow box that you have its shown on your video

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      The Jamma game board is the Pandora's box.

    • @JohnCutePussywhipped
      @JohnCutePussywhipped 7 ปีที่แล้ว

      Yes sir I understand
      This small box Dosent come with the joy stick
      So I want to know how to connect it to the tv and do you sell a joy stick that is compatible with the Jamma arcade box

  • @chrisnaylor8211
    @chrisnaylor8211 2 ปีที่แล้ว

    Thanks very much!

  • @justin7332
    @justin7332 7 ปีที่แล้ว

    way easier than i thought it was

  • @davidw670
    @davidw670 4 ปีที่แล้ว

    anybody running a 2100 in 1 that BSOD on start up with a "Kernel_data_inpage_error"?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว

      Looks like you may need a new drive my friend...... We provide them if you need one.

    • @davidw670
      @davidw670 4 ปีที่แล้ว

      @@RetroactivearcadeCa I would love to purchase one! I don't see any on your site...how do I get one from you!?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว

      @@davidw670 contact us directly at customerservice@retroactive.ca

    • @davidw670
      @davidw670 4 ปีที่แล้ว

      @@RetroactivearcadeCa - sent an email explaining situation, stating that i wanted to buy a hard drive and Jaclyne O'Neill replied basically telling me "retro arcade" doesn't support anything not bought from them....so even though i want to buy a hard drive, I can't because the overall purchase of the "cabinet/game" didn't come from you?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  4 ปีที่แล้ว

      @@davidw670 no worries, we have a ton of emails coming in and that is an automatic response. I will get her to email you a proper reply

  • @CAPITANxMARVEL
    @CAPITANxMARVEL 7 ปีที่แล้ว

    Really nice video thank you

  • @JHKhoury2
    @JHKhoury2 7 ปีที่แล้ว +1

    I have a 2019 in 1 and the hard drive was DOA. Can anyone make a clone of their hard drive and share it?

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว +1

      Jack Khoury you can check or site at: retroactivearcade.ca/3149-in-1-jamma-hard-drive-2/

  • @WinrichNaujoks
    @WinrichNaujoks 6 ปีที่แล้ว

    I still don't understand what JAMMA is. A company? A connector standard?

  • @stephengiacobozzi1299
    @stephengiacobozzi1299 5 ปีที่แล้ว

    can you put MAME on 2100 game

  • @jesusiniguez1997
    @jesusiniguez1997 6 ปีที่แล้ว

    Hi Install 4 hd.converter.work fine I try install other in the same tv ..dont can adjust vertical .any idea.
    Tv new .2

  • @Rand0m411
    @Rand0m411 8 ปีที่แล้ว +1

    Thanks a ton for the video. About to start a pandora's box 4 project.

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  7 ปีที่แล้ว

      Did you finish your project yet? Would love to see some pics!

    • @AllThingsRenStimpy
      @AllThingsRenStimpy 7 ปีที่แล้ว

      Retro Active Arcade Ltd.™ if you had a personal preference, would you just run Mame on PC? I have a 60n1 cab, but I use PC for almost every build. My current project is a PC driven NBA Jam cab, just loaded with all the 3-4 player, 3 button games. My multicade pedestal is PC too, and my Scramble cocktail with probably follow suite. I only use jamma for cabs wired for jamma already. Lol...nevermind, got my answer at the vid end while typing this!

  • @patomax2
    @patomax2 8 ปีที่แล้ว

    thanks for the video !!!

  • @horaciososa496
    @horaciososa496 6 ปีที่แล้ว

    Hello, your videos are increible amazing they way you explain is great for the new students thank you so much a learned a lot from you!!! Do you have a video on how to convert from CRT to VGA using the adapter and what cables to connect, again awesome work!!!

    • @RetroactivearcadeCa
      @RetroactivearcadeCa  6 ปีที่แล้ว +1

      I'm sorry I do not, the reason why is that if I did a video on that it would be specific to what I was showing, brands, connection locations etc. I am sorry to say that it could be a trial and error situation at times, I can say that both of your sync wires from your monitor to the card adapter do tie into the 1 white cable of your adapter harness. The RGB is in sequence on the adapter but it is hit and miss sometimes from the monitor (wire colors may be different). You will need to get a schematic of your CRT before you start cutting away connectors to splice into your card for sure! Another thing to remember is that there are video adjustments on 3 different items when you do this, the CRT has a controller that allows for your sync and color saturation, then the CGA to VGA adapter has sync/color options and then your VGA monitor has its own options as well so there is too many variables to account for.

    • @horaciososa496
      @horaciososa496 6 ปีที่แล้ว

      @@RetroactivearcadeCa thank you for taking the time to respond keep the great work.

  • @erikc8284
    @erikc8284 8 ปีที่แล้ว

    Many thanks dude! It was very helpful! :-)

  • @taranatahmina5357
    @taranatahmina5357 4 ปีที่แล้ว

    Dear Sir I speaking from Bangladesh. I am a arcade gaming business man. I have a couple of video game shop in my city. My gamer is fell bore to play of pandora or those similar game. So I need to some new multi game with jamma pcb accordingly. In fact neo geo, capcom, konami or other jamma pcb platform has not attract the new generation gamer. So i need a new gaming jamma pcb board like Fifa 11, 12 or 13, need for speed underground, tekken 6 or 7, house of dead 2, call of duty like others. So is this possible to make a jamma pcb board on these game for business? may be those game will be format a arcade version mode. because my all gaming machine was build with arcade cabinet box system. so let me know sir, can you make my new game in jamma pcb formet. its busness purposes for based each player can play coin system.

  • @emulatorretro
    @emulatorretro 6 ปีที่แล้ว

    I just want to connect it to my projector and usb type controller.

  • @Unique-Videoe
    @Unique-Videoe 5 ปีที่แล้ว

    Pandora 5s price in india

  • @angelmontanez557
    @angelmontanez557 7 ปีที่แล้ว

    Thanks..... Great Video

  • @MegaTapdog
    @MegaTapdog 5 ปีที่แล้ว +6

    Might want to start with definition
    Japan Amusement Machine and Marketing Association

  • @XD24D
    @XD24D 6 ปีที่แล้ว +1

    Mute?

  • @stephengiacobozzi1299
    @stephengiacobozzi1299 5 ปีที่แล้ว

    2100 game can use speaker jack

  • @MauricioGaelzer
    @MauricioGaelzer 6 ปีที่แล้ว

    Muito bom!!

  • @FreedomofthepressCanada
    @FreedomofthepressCanada 3 ปีที่แล้ว +1

    She’s a bad mamma JAMA

  • @erikprestonTV
    @erikprestonTV 4 ปีที่แล้ว

    This dude is like Elon Musk's long lost twin

  • @sqarcade-arcade188
    @sqarcade-arcade188 8 ปีที่แล้ว

    casey, I lover you

  • @snesfan8935
    @snesfan8935 6 ปีที่แล้ว

    Pandora Box's suck. Most of the games are interesting for me not working well.

  • @gamewere_oficial
    @gamewere_oficial 6 ปีที่แล้ว

    God man

  • @Tele3C
    @Tele3C 8 ปีที่แล้ว +1

    clark kent