How To Clean: Sig Sauer P320 Pistol
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- How To Clean: Sig Sauer P320 Pistol
Products used in this video:
Otis Elite Cleaning Kit: amzn.to/1ZX2CvG
CLP: amzn.to/1ZX2DzC
RemOil: amzn.to/1V61zdm
Cotton Swabs: amzn.to/1OvJ5BS
Sig P320 Unboxing - • Unboxing: Sig Sauer P3...
At The Range: Sig P320 - • At The Range: Sig Saue...
Wondering how to teardown / disassemble / clean your new Sig Sauer pistol? Well you've come to the right place. Ill walk you through dismantling your Sig P320 and the steps you should take to keep it clean and operational.
![[LIVE] : ONE ลุมพินี 76 | คู่เอก "ผึ้งหลวง vs สมิงดำ"](http://i.ytimg.com/vi/9SBshmGQOIM/mqdefault.jpg)
![[UNCUT]"ทักษิณ" โชว์ฤทธิ์-ครอบครอง "อุ๊งอิ๊ง" ประเทศไทยมีนายกฯ 1แถม1 I คนดังนั่งเคลียร์ I 23 ส.ค.67](http://i.ytimg.com/vi/Uyl4y59R-Sk/mqdefault.jpg)
Grew up without a father or father figure, and have always had to figure things out on my own never knew how to clean my gun until this video. Was too embarrassed to ask around. Truly from the bottom of my heart thank you so much for this video.
😢😢
Like wise brother. Fatherless doesn't define us or limit us and hopefully if you have your own kids you'll pass on the stuff you learned on your own
@@spartan_gainz4198 I was lucky to be blessed with a father so I can't begin to understand what that's even close to being like. My sincerest condolences. My uncle offed himself with a gun so they were demonized in my home. As a result I can relate to having to resort to finding the information independently however. This man is helping so many people. I just hope one day I'll be able to teach myself enough via TH-cam and other sources to go hunting one day. It's been a dream of mine. As building and owning an edc p320 was. It's honestly sad how modern society has disconnected us from becoming truly independent. Anyway, I hope you guys enjoy the guns and may good things come your way.
man that release pull down lever is one tough cookie on a new gun.
Yeah, no kidding!
ClayTrader Guns gets better in time. I've ran about 300 rounds on mine and it's a lot easier now.
OMG Yes!!!!!! Pulled up my nail at the edge.
mykylc omfg YES!!!! I've been assembling and disassembling it for a few days now to try and loosen it up a bit it's a bitch
glade to see im not the only one who thought that
New to firearms the Sig P320C is my first gun. I have training in a few day's. This video was helpful and you made it very easy to understand even for the newbie.
"Look down the barrel and make sure there's nothing in there" instructions were unclear, now I can breath the back of skull
Just picked up my P320 40 cal today. It;s my first handgun - and feels almost as good as having my first kid. I had a hard time figuring out how to reassemble it following my exuberance to disassemble it. I didn't realize you had to lock the slide to allow the takedown lever to rotate. I am amazed at how simple this gun is to take down. THANKS for a great video!
That's awesome! Congrats on your new kid... I mean "gun" ;-)
Craig Fuhr First gun? You're also probably new to the ammo game... www.ammospy.net, but stay away from STEEL AMMO and REMANUFACTURED AMMO! Steel isn't flexible like brass; it expands, but won't contract, so it won't properly eject from your weapon!
1000 rounds of .40S&W will normally run you approximately $250, so $12.50 for a 50 round box. What do you pay at an outdoor store? $30 for 50 rounds? Save where you can!
Winchester purple box (training ammo) is $10.99/50 rounds!
www.outdoorlimited.com/ProductDetails.asp?ProductCode=q4409
Same i just got my first gun and its this exact same gun sig p320 full size it was hard for me to decide between full size and the compact but went with full size and this vid helped me alot with cleaning it i only fired about 40 rounds but cleaned it anyway mainly just to learn how love this gun and im working on getting my carry permit its very easy in tn actually as of july 1st 2014 your allowed to keep it loaded in your car as long as its a legal gun and registered to you and i've been bringing it with me alot recently since my brother almost got robbed went to meet a guy to sell a ipad pro and guy grabbed it and started running my brother fired his 9mm smith and Wesson shield once up in the air he stopped running in his tracks so luckily he had it in his car or he'd of been robbed of almost a $1000 ipad. Also i have sig FMJ for range, sig hollow points for home defense, and i just got a box of blazer fmj to test out the gun because it was only $10 a box of 50 but it seemed to do ok but wasnt really trying just testing out the gun i bought a box of 100 of federal ammunition fmj to use at the gun range but will test out to see if its just as good if not better than the sig fmj. also got 1 box federal range ammo only tried the federal and blazer so far. dont want to waste alot of the sig it was $20 a box
Thank you, You made it nice and easy to understand. Been 40 years since I was in Army and that long since I have owned a pistol
The use of Gun Scrubber or Powder Blast after you have loosened up all the fouling does a great job of getting rid of all of it in short order. Follow up with another round of solvent cleaning and repeat the process as necessary. Finally spraying Sheath Rust Preventative down the barrel and on all the metal surfaces following up with a clean patch to remove any excess will leave a coating that will not allow fingerprinting on the metal. All the friction services are coated with Firepower FP-10 Lubricate Ellite, a drop of each rail letting gravity work it down the entire rail and wiping off the excess. I like to use Butches Bore Shine, discovered it after buying a Lilija Barrel, which is hand lapped and top quality accuracy, I haven't found a better solution for cleaning in short order. Also I sometimes use Sweets 7.62, and also the old stand by Hoppes but not so much using Hoppes at this time. I have just bought some CLP but haven't tried it yet and another similar product....but for my most expensive target pistols and rifles I use the process as previously noted. Thanks for the article on the Sig P320 as I have just purchases one and like to know what to do before attempting to disassembling it for cleaning. Looks fairly straight forward and easy.
This video was a huge help! I watched this video the very first time I cleaned my Sig P320 SC and it was explained so clearly. The only thing that I had trouble with the first time (and couldn't find a description in any other video) was the correct way to put the spring back in. The spring has a flat end and a rounded end. It took me some time to learn that the slide wouldn't pull back to lock into place because the spring was loaded in wrong. The spring needs to go on the barrel with the rounded end placed on it.
With the 2 holes facing up and down. If buffer spring is installed properly you should only see one hole. It's counter intuitive. Seems like they want you to put it on the flat spot
Thanks for the video. As a new shooter I got this P320. Great so far. Put 400 rounds through it and found this video to clean. Excellent!
Darn good video. I've been cleaning firearms for a half-century, and your pouring oil into an old gallon jug cap is genius!
Good video for as far as you go. A good field strip and cleaning is much better than nothing. The beauty of the P320 is that you can also break down the FCU, extractor and striker assemblies. If you don’t feel confident going into that detail, take your weapon to your friendly neighborhood gunsmith and he or she can clean down to the sear housing for you.
Hey, I was looking for info on lubing, so I watched this again...
Go to Cabela's and get a BORE SNAKE for $10! I shit you not... I'll put CLP on the bore snake; run it ONCE, and the whole barrel will be clean! I run it one more time just to be certain that nothing was left, but stop wasting time and money on patches :-D
The BORE SNAKE is absolutely amazing...
Informative and easy to understand. Thank you for the time you took to explain. I'm learning how to operate my sig p320 I recently picked up. Cheers, mate.
Thank you for this video. It was really helpful being a new gun owner.
As a new pistol owner (getting in while we still can), I certainly appreciate this video. I bought this wry gun and it was nice to see the steps even if it is a simple process. Now I know with certainty I’ll be doing it correctly. Thank you!
@@halcyonoutlander2105 humor poking fun at gun control laws.
@@qwaynick😂now I get it
This was my first pistol, so thank you for a very good explanation of how to doe everything. The only ting I'd like to add, you should add in how to take the lower out and clean it a little bit deeper... But other than that thank you for an awesome video!!
Just realized I’ve never purchased a newspaper.
You can take the fire control unit out for cleaning, a little tough at first but not hard to do.
Thank u for the video, wouldn't be able to break down my sig without it.
I've had a 250 for years, just got a 320, wow the trigger pull is much nicer
Thanks for posting! I just bought a 320 today, and it's my first gun.
Dillon Smiley don't get nothing on the striker
Thank you for helping me out.. wanted to double check make sure I wasn't missing anything.
Do you think maybe the next time you clean it you could maybe clean the spring?
it says in the Sig book dont get any of that oil near that stiker !
Thanks for the heads up!
It absolutely does, just picked mine up today, and in the lubrication section, it says the firing mechanism must remain dry, to prevent misfire, or "soft strikes"
@Uganda Knuckles a LOT of people get soft strikes because of that
Should you use clp on the striker then dry it or just never touch it at all? Or should I just wipe the striker with a dry towel?
@@williamphillip9749 The latter.
Thank you for the help! I can’t believe people pass over the spot with the most friction, it was one of the dirtiest spots!
This was great. First time I cleaned this, and you made it super easy. Thanks.
This was helpful thanks for the video. I just got my sig
I Love my Sig P-320!
Damn did not expect to watch a gun review from you
Thanks for taking the time to make this video brother! What about re-greasing it? We dont have to do that?
Thanks for the video! Just finished firing off some dirty reman rounds myself! Need to clean her up when I get home.
thank you for the video. wanted to say something funny. when I was in the army they had use clean our rifles spotless and had us there for hours haha. but yea I agree with you that it doesn't have to be 100 percent to be good and it's made to work. I'm new to handguns and I just bought a p320 so thanks again for the "how to" video
Thank you for this video.
Stonks and guns.. you really living the life haha love your videos keep up the good work
Great video. Just bought myself one of these, looks pretty easy to do!
Thank you, you made this nice and easy to understand.
I use one of those old nasty brown towels they issued us in the USAF.
I actually removed the fire control unit and cleaned/wiped it down. I then lobbed the moving parts.
Cool, I'll have to give that a try. Thanks for the insight.
+ClayTrader Guns Yeah, remember to always take the chassis out and wipe all of the black gunk that'll pile up on it. Yes, it's a Sig, and it'll fire even if it's dirty, but you should take care of it the best you can :-)
Thanks for the video
Awesome video was great.. Made it simpler than I expected!
Tom Strickland, the only amazing was the newspaper. He drenched it Sig in oil which is a major no no.
SO helpful. Thank you. Cleaned my Glock too!
It is possible to get it perfectly clean I had to clean for a couple of hours at the armory 😭.
After I cleaned my rifle, a corporal showed me a trick, this was for a rifle so I don’t know if it applies for a gun (slamming what would be the slide, or tapping it against a surface to get the gunk out, then wiping it clean with a rag, then the q tips).
I just received this gun for Christmas and am a novice gun owner. Very helpful video. Thanks! Subscribed too :-)
Swing back and let me know your thoughts on it after you put some rounds through it.
Chad Hough www.ammospy.net is the best ammo search engine! Steel doesn't bend like brass does; it poofy after being shot, but it stays poofed and doesn't shrink again like brass!
Don't buy cheap steel shit because you WILL have constant failures; it won't extract! I personally don't take the chance on shooting remanufactured ammo... If the person didn't set the primer correctly, then the round is going to blowup in your gun. Was saving $50 on ammo worth ruining a $500 gun? Don't take the chance... Just order some Blazer Brass or Winchester white box for $180!
Thank you, you are great
Good video! There are many ways to do a basic job and 5,000 opinions on how...
Thanks man!
I'm not a real big gun guy, but I've had guns for years. I always thought you cleaned the gun with something like Hops 9, then oil it with a gun oil of some kind. Are they making stuff know that does both?
Yes, CLP. Stands for "cleaning, lubricant, protectant". Some say it's not as good as separate cleaner and oil, but many people use it as a do it all. He was using CLP.
I found that the manual for the P320 calls for "CLP". But since CLP is kind of a generic term, maybe you can use the separate solvent and oil. I read somewhere else that modern ammo burns much cleaner than some of the older stuff. Maybe you don't need so much solvent anymore?
@@azcharlie2009 I think either option is safe to use. I kind of mix it up. When U use CLP I choose one called Frog Lube.
Thanks
thank u so much
If you own a sig you have to clean it after every shoot otherwise the slide won’t go back into battery. Common problem
Just my observation...seems to be quite a bit more oil than is necessary when you reassemble and will attract more buildup if put back together that wet...
Way to much oil... People nvr realize that less is best..
I use Balistol...I soak the barrel good...clean inside and out. The upper and lower get brushing with a clean and dry tooth brush to clean and use just a bit of Balistol on the parts which interact with the upper and lower (very little)...spraying and soaking the slide and lower only attracts powder and grime. a dry slick gun functions much better than a wet oiled gun. If you're familiar with cast iron skillets and how to clean, it's the same concept. Oil residue attracts dirt and makes gun cleaning more difficult. Although, It's your gun...do what you want...just my two cents...
@@iAmNyC718 100% correct. slide rails, a drop or 2 on the barrel locking lug, a drop on the barrel hood. never any in the striker channel.. Been doing this for years and it has worked for me.
thanks for the info
You're welcome!
Awesome thanks
I cleaned mine today for the first. Is it possible to put it back together wrong?
I’m a new gun owner and I want to as responsible as possible
With how much you’re cleaning could that damage the striker ???
Great video information I need just bought Sig p320
what cleaning kit you recommend also please where can I buy extra mags at a reasonable price. Thank You GOD BLESS.
Thank you, very informative and helpful!
Sup Clay! I really enjoy your stock day trading videos, thank you for that! Just curious, will you post anymore firearm videos? Asking cause it's been almost 5 years since you posted your last one, thanks!
Thank you! Very helpful
Does the P320 require more cleaning than a Glock? I always just use a dry toothbrush to get the carbon out of the slide, and other surfaces that are dirty. I found that I didn't need to use CLP or anything else.
I'll use cleaner on the barrel, and put a tiny amount of oil on the slide rails, but that's about it. I definitely wouldn't use cleaner anywhere near the polymer sections.
That's all personal preference, I find that they are about the same in terms of maintenance needs, but never had an issue with either.
That moment when you put CLP in one of the few spots the manual actually stated with urgency not to put it anywhere near lol
chandler wortham yeah near the striker lol
Its already been said but dude remove the fire control! it pulls right out!!!
Simple and easy 👍
Why didn’t you remove the FCU to clean it?
I didn't see but did you clean the spring?
Rob, the spring really doesnt get too dirty so I dont clean it every time. However a quick wipe down with a damp patch should be all it needs.
Dude my take down lever is fuckn hard lol. You did it all easy
Good to see you and I have more than trading in common.
I have a question, so i just bought a brand new sig sauer m17 and started using gunzilla clp on it, is clp fine and safe for polymer? Is it going to dissolve the polymer or any plastic parts in the gun? Cause you know the clp will drop on the frame from the slide
How about the spring?
Very good video! Very informative, clear, up beat and to the point! new subscriber!
hi! a question about the p320
for you the little hole on the slide, near the striker Channel and near the extractor, what is the function?
is a hole from the striker Channel or from extractor Channel?
thank you
So I was a Glock fan boy until I grabbed the Sig P320 X Compact last week and placed my order for 1 my question for you is, is the cleaning the same as with the Sig P320 your cleaning in this video? THANKS!!
It is
Is that a metal cleaning brush on the barrel or plastic
thanks bro. nice work
Gloves man! - use nitrate nitrile gloves. It is much clearer, simple to use, cheap, & saves time washing dirt/oil from your hands.
The video itself is fine.
I thought they said not to get any fluid in the striker
Gloves would help you out immensely
Hi! Just bought my P 320. This is my first gun.
Can you text me the correct names of the things which you used for the cleaning ? ( I didn't asked it in the store,I felt little bit stupid). I think I will buy them on the internet.
Thanks a lot!
Sztyopa
Good video thanks
Great info... thank you
Thank you Bonnie.
Sudden sound at 10:46 made me shit myself.
Release the slide? How? After you swing takedown lever to disassemble slide from frame, do you need to press down on slide release first or does it just slide off on its own with forward movement?
brentfoto, first, pull the slide back into battery and lock it. Next, pull the release lever down to the 6 o'clock position. Next, hold on to the slide with your right hand (you don't want the slide to go flying off), and gently release the slide lock, moving the slide forward while still holding onto it. reverse the procedure when ready to re-assemble.
Are you sure you’re not secretly Jeff Goldblum? Because you sound just like him 🤔
I shots my sig p320 400 rounds and it took me 2 hr to clean it perfect
Interesting. It shouldnt take that long. I recommend "Hickock 45" watch his cleaning methods. I now use Ballistal as he uses. Hes very knowledgeable . I too only grease metal to metal parts. Around the firing pin and places you dont want dirt to collect for 20 years I have used alcohol on q-tips. Alcohol dries fast where solvents dont. Hickock45 is A Glock shooter and likes Sigs as well. Hope I may have helped. You may already know all I mentioned above. I would like to have helped you save time cleaning.
Look up the barrel never down unless its outside of the firearm.
SPRING DOES NOT GET CLEANED??
good lord, you're a weapons dealer too? is this side income or a multinational business XP.
p320 is unique gun which is modularity, you could remove the whole lower out of the frame to do more deep clean. lol.
That's true. But I'm not a huge fan of "deep cleans". The guns are built to "work hard" and shoot.
ClayTrader Guns Better safe than sorry...
Rotate the takedown lever, shit... Just watch other videos on how to properly remove it. You just need to take a dry tooth brush to clean off the fire control unit, and then you apply very little lube to the moving parts. It's not rocket science, but you need to take care of it every once and a while...
pulling brush through barrel seems easier.
Jason Asunto yep, but it will come thru facing you which means when exiting the barrel, the force of the brush coming out sprays the oil and junk on you.
Paper you don't care about like say... Wallstreet Journal 😆🇺🇸
I'd be careful not to get that CLP you are brushing inside the firing pin chamber.
Looks down the business end
What about the spring??
My wife doesn't let me clean my gun in bed, so I have to wait til she falls asleep and then I have to do it in the dark. I usually blame the mess on my dog but today she dropped him off at the pound while I was at work. What should I do?
Tim Askey Get another dog.
Tim Askey did you get your dog back?
clean it in the bathtub like a normal person.
Probably the best cleaning video ever. I use the same method and never had a failure because of lack of cleaning.🤛🏻👍🏻👍🏻
BDurant, you must be kidding. He broke the cardinal rule over lubricating. He even gave the firing pin assembly a good soaking. Trouble down the road for that beautiful Sig.
You really don’t need to use all those things. Unless it’s incredibly dirty, those solvents are not necessary. You can simply clean them with a cleaning lubricant like WD-40. No need to over do it, but to each their own. The barrel may be the only thing you need a copper cleaner on (in most cases).
never use WD40 to clean a gun it will rust .. don’t listen to this guy
@@alvinkada317 I never said that’s all I use. I use other things as well.
Great video! :)
Nice intro bro 💯
You're a funny guy. Way too much oil. Holly go lightly.
82 Luft yup
I was thinking the same thing.
how i do it, brake cleaner in a spray can, new toothbrush, the take it in the shower and use the handheld sprayer. boom, clean
guns and charts!