Installing a Circle D Converter in Kohen's C6 Grand Sport Corvette (How we did it)
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- Installing a Circle D Converter in Kohen's C6 Grand Sport Corvette (How we did it)
Want TWA Motorsports Merch? Go to www.twamotorsports.com and pick some up!
Parts Used
Torque Converter www.circledspe...
Tools Used
Corvette Jacking Pucks amzn.to/3Vjbyl9
Torque Wrench amzn.to/3IamaeC
LED Light amzn.to/42Id4z0
Motorcycle Jack amzn.to/3vdUzpW
Gloves amzn.to/3XCeitd
Microfiber Towels amzn.to/43chzka
Other Parts on the Car
Headers speed-engineer...
X-Pipe(Off Road Only) speed-engineer...
Header Gaskets amzn.to/3rfqpjG
ARP Header Bolts amzn.to/3XGuSrD
O2 Extension Harness amzn.to/3O3V5xr
Heat Wrap Velcro amzn.to/43eHmYI
Spark Plugs amzn.to/3NEubL4
Mild to Wild Exhaust Switch amzn.to/44bGR3b
Spoiler Used www.rpidesigns...
Other Spoiler Options amzn.to/3KEYaBJ
MSD Plug Wires amzn.to/3s6TEFY
Well Kohen has decided he wants to install a higher speed stall converter in his c6 Grand Sport Corvette. He saved up and bought a Circle D Billet 3200 stall. He bought it for the 6L80E Transmission his C6 has and is looking to eventually do a Blower so it is spec'd for the cam he chose and a blower. We are going to show you what needs to be done or how to remove the old converter in this video. We are removing the rear transaxle as a whole unit. We also are dropping the rear cradle and exhaust to give better access to the transmission bolts. Once we get all those things removed and the transmission on the ground, pulling the old torque converter is easy. We install the new circle d Stall in the C6 Corvette transmission and start to go back together. I think he is saving for more mods so make sure to check out the future of this C6 Grand Sport Corvette Built. Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Want to Send Stuff
TWA Motorsports
PO Box 190
Aurora MO 65605
Subscribe and Follow TWA Motorsports
TH-cam: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/3FMXiI3
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/3KC27HO
Photo editing amzn.to/3KC27HO
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.
Getting serious with the Corvette... 👍 Make sure your Dad is watching every step and helping you.. it's a big Job you are tackling for the first time on a Corvette..and take your time and do it rite the first time..,..
I am there for every move
This video helped me install my stall much appreciated
Glad it helped
Hard work pays off! Keep it up. Trav you're such a good Daddy ❤
Thanks. Hope he appreciates it
Glad to see another Corvette video! I can't believe those rotors are that rusty.
They are getting replaced
Nice meeting you guys at TX2K!!
I'm glad you said hi. Was nice to meet you too
If you don't mind me asking, what size converter did you go with? I just got off of the phone with Circle D and ordered one for my C6 Grand Sport, I went with the C3 stall.
3200
Can't wait to see what cam he picked
It's coming
I did heads, cam etc on my car and was told I should get a converter. I got the Circle D billet I think it was a 3200 stall. Got my car back and HATED it. Ended up having it taken out and sent to get re-stalled as close to stock as possible. Much better driving manners IMO. Yes the converter is probably good for the track. But not for me.
Yeah it will be a big difference
@@TWAMotorsports I personally would never do that again. Especially on that beautiful Vette.
I get that
That's how you learn. Do it.
Exactly
👍
Thank you
Dam all that work just to put a dam torque converter yall almost did a whole engine swap i wouldve just left it alone
Yep. His money
He must be cutting a lot of effing grass ! Watched 2 minutes and 47 seconds of this.
Lol. He works a lot
Kohen you need to to start a street racing Channel show us how this car does and if you build a drag car would be cool to follow along I watch what Billy is doing at src and he’s young and has lots of followers and gaining sponsors have fun hard work pays off can’t wait to see this car do a pass get some street footage with the dragy would cool to see how much it gains with every part you add to it never enufe parts lol keep going
Definitely
Travis, you didn’t sound too enthusiastic about this project 🙁🙁🙁
I am but also not. Lol
@@TWAMotorsports I totally get it
Lol