How to Replace Steering Wheel Coupler 11-14 Hyundai Sonata
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/366/a/SteeringWheels...
In the video, 1A Auto shows how to replace the steering wheel coupler. This video is applicable to the 11, 12, 13, 14 Hyundai Sonata.
This process should be similar on the following vehicles:
2011 Hyundai Sonata
2012 Hyundai Sonata
2013 Hyundai Sonata
2014 Hyundai Sonata
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oqY/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oqY/1AXAA00013
• 10mm Wrench 1aau.to/oeC/1AXAA00010
• 14mm Wrench 1aau.to/oeC/1AXAA00010
• 10mm Socket 1aau.to/oom/1AXAA00017
• 12mm Socket 1aau.to/oq5/1AXAA00015
• 14mm Socket 1aau.to/oq5/1AXAA00015
• Trim Tool Set 1aau.to/ofb/1AXXX00006
• T30 Driver 1aau.to/oda/1AXAA00008
• Ratchet 1aau.to/osq/1AXAA00016
• Socket Extensions 1aau.to/oq5/1AXAA00015
• Soft-Bristle Brush 1aau.to/obu/1AXAA00079
• Wire Brush 1aau.to/obu/1AXAA00079
Subscribe: / @1aauto
Check out our playlist:
2010-2014 Hyundai Sonata: • 2011-2014 Hyundai Sonata
For More Info visit us at 1aau.to/h/CP/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
I wanted to say thank you to the lady who is the technician in this video. She is top-notch. Incredibly professional and explains every step in detail - from start to finish. EVERYONE making these types of videos should learn from her. Thank you again. You are the best.
+afortiori1000 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I’ve done this particular repair 6 times. I love coming back to this video for a quick refresher. Very detailed, very professional. 👍🏾
Hyundai: 500$ with taxes. Me: 17.50$ and done two hours later. Thanks for your video.
It was very complex! I went to the dealership and they told me I have to change that part, I didn’t know that it’s bad… but the price is $326
If you’re under 100k mi it’s covered under warranty.
@@YayaKins well for me they wanted to charge me 300$ and I was under 100k. I think it depends on the year because there is a recall.
Due to the many recalls Hyundai has issued for the Sonata, mine was replaced at no charge because it was covered by the extended warranty. It was done early this year.
I hope the mechanic doing this job on my Sonata watched this video. Now I see why they are charging me for two hours of labor. Glad I watched; I'll be definitely double checking everything after the repair is done. Nice professional job by this mechanic.
Great video, completed this job just under an hour. My steering wheel was knocking really bad and that darn parts was shredded. I recommend this video to whom is looking to save money. The only thing I don’t recommend is removing the steering knuckle. There’s just enough room to work with while it’s still mounted.
Thanks for the tip. That makes this a lot easier. I'm going to do it tomorrow
you dont have to take off the u-joint? you just dropped the steering assembly down and did it all right there in the driver footwell?
Wow just I have to say’ this girl is absolutely amazing she explained everything as a pro she is. I did it myself just in 45 min and the results was wonderful everything work perfectly and smooth. The little piece of plastic was literally blended. The only thing that was terrible was put back on the super heavy steering driver wheel. That sucks with almost 45 pounds to hold in the installation. Thanks guys to expend time teaching people doing it by their own. Congrats from Arizona USA
No way it took 3 hrs for me
Replaced the piece on my wife's car. Took about 3 hours for a novice and a couple breaks in between. The hardest part was get the colum back in position after replacing the piece. Once put back together the steering felt amazing and new.
Me too...i used the jack in the trunk i padded it and lifted the column little by little until it was flush then screwed in screws and voila
Just did my Sonata tonight. Your video was a great help and I was able to do it start to finish in an hour and a half. Thank you.
One of the most detailed, documented, and well explained repair videos I've seen on any component.
Excellent video. Such a common problem makes you wonder why such a cheap part was ever used.? Very labor intensive.
Thank you so very, very much. I am in my 70's with back, spine and hip problems. It has taken me a couple days doing 0a little at a time but I got it. You are so precious. Thank you so very much.💞
Thank you for the video! Took me about 1.5 hours start to finish. 20 minutes of that time spent cleaning out the shredded sticky mess of the old coupler! Did not disconnect the steering knuckle and dropped it down on a block of wood to stop the column from twisting while lowering making it easier to access and separate the electric motor to access the coupler. Fairly easy job overall.
Girlfriend's Sonata has been clicking for MONTHS. I wouldn't even answer her phone call if she was driving. Video it's fantastic. Took me an hour, and I didn't pull steering shaft all the way out of vehicle. I simply leaned it on floor. Sound fix. $17 fix. Thank you!!!
Thank you very much. Your video was very clear and great camera angles. I followed the video and completed the repair on my car myself in 2 hours. The only hard part is getting the steering column back in place. It's heavy, but you made it look so easy!
This was very very helpful, followed step by step and fixed my 2013 Hyundai Sonata. I will say tho, that steering wheel column is heavy! Be prepared to put some muscle. Totally worth it 🙌🏽
Great video! I just bought the coupler from 1A and watched this video. Took me about 2 hours start to finish and car no longer makes that annoying clunk sound!
Hi, can u explain what will happen if the plastic coupler spoil up?clunk sound only?
Just finished now, successfully. Thank you to the lady that made this video shows you step by step.
Great technical audio and video skills....this technician knows her stuff....as for me I would never attempt this job....thanks again for the share....
Happy this helped DIY’ers save some 💰, this is why I went searching for a video like this, but then as a precaution I checked with Hyundai. This repair was added on to the “extended warranty” list, and I squeaked in just under the ten year mark. So didn’t cost me anything to have the dealership do it. I was confident I could get everything taken apart, but I thought I know I’ll screw something up putting it back together 😂
Thank y'all so much for this excellent video - saved me hundreds of dollars and hours of head scratching. My old coupler was completely disintegrated! All the little arms were completely destroyed. What a silly design flaw.
Video saved me about $340 from a shop. Mine was absolutely shredded and unrecognizable (previous owner says it went bad at about 97k miles. It was at 160k when I replaced it so it’s been getting smashed around in there for quite some time) steering is perfect and smooth now though. Thank you for the clear guide!
+E V Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Another fine idea from automakers. I would agree that this is a well shot video. I have been an automotive tech over 50 years. The only thing I would add is to make sure if you have the front wheels off the ground that they also don't move or the clock spring will be ruined. It is always best to put the wheel's straight ahead so you know where you were at when you took it apart and if the steering doesn't lock exactly in the middle you can always rotate it slightly when you're trying to line it up. You can always take a soft Rag and a piece of wire and lock the steering wheel in the general area also. If worse comes to worse you can always remove the clockspring and wind it gently to one side and then back to the other and find Center as long as you don't force it at its stops you won't hurt it. One last thing, very important , I would always put blue Loctite on the pinch Bolt and it's not a bad idea to put some on the mounting bolts also. It isn't that much longer to remove the column and work on it on the bench but you can also do it in the car under the dash it's just a little harder on the body. Really it's not even necessary to remove pinch bolt and shaft you just got to be careful remove the fusebox lay steering wheel gently down on the seat don't break any of the switches and you can repair it in the car that way you don't have to unhook any of the wiring on the steering column just got to be careful not to break things
Appreciate your wisdom sir. People such as yourself give us novices hope and will to learn
I’m just gonna act like I didn’t see her break that connector 🌳👀🌳
arkangel2487 hahahahaha I saw something go flying lol I laughed
8:57 lul
Lol
The Good, The Bad, And The Ugly fr! 😂 i was like wait a minute lol
I do it all the time, LOL.
Great video ! I followed it step by step and it worked great after I found the connector I didn't push in all the way. After I finished the first time, nothing worked, and I was very worried. Then I opened it back up, and pressed on every connector on the key area again, and Yaa, now it works great.!
Excellent video. But I think it's still complicated for someone like me. Hopefully will find a mechanic that can do it for a lot less that Hyundai try to charge.
Great work lady I'm really impressed for your skulls
Thank You, Thank You. This was so easy to follow. Only took about an hour over the weekend. Easily saved hundreds of dollars.
+David Gotwals Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
I used this guidance to successfully repair a 2012 Elantra. It is pretty equivalent. Thanks
Did you notice any major differences? I have a 2011 Elantra
I took mine apart just to see that nothing was wrong with mine. The one I already had was completely different (like the one in the thumbnail) from the one i got offline. The one I got offline may have caused an issue in the future because its alot thinner than the original. Did anyone have any issues with the steering wheel not being centered after completing this?
Thanks for this. I was able to save hundreds of dollars by following this thorough video showing how to replace the steering wheel coupler. I reviewed many of the videos out there on the same topic, and this was the most thorough by far. Thanks!!
Watched another video on how to do this repair but didn’t show the put back together. I’m glad I saw this video. I’m still needing to mount back the steering column. Started late and ran out of light. But my main worry was connecting everything back. Your video shows pretty much all the connections. Should knock the rest out tomorrow for sure with confidence. Thanks for the great video.
+Ricardo Castro Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Verry good video: Replaced the coupler Hyundai 56315 2K000 FFF coupler on 2010 Hyundai Elantra : removed drivers seat and the steering assembly bolt that goes thru yoke bracket . Steering wheel then lowers to the floor . Used T25 torx bit on motor and top computer module. Used screw driver gently pry motor back from unit while leaving the black plastic electrical connector part attached to the unit. Holding motor and installing new coupler was easy. Thank you for the video!
Excellent video did mines came out just fine thanks! I'm not even a mechanic. You tube just made me one.Thanks 1A auto again.
Your video was a great help for me thanks. You are the best young lady ♥️
Awesome step by step video. Followed it all the way through and pausing to complete each step. Your video made it so easy. Thanks.
+Arsenio Martins Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
no need to take the whole steering assembly out. just need to drop it down, if needed, remove the fuse box (only 2 screws) and that gives u all the space you need. just did mine today.
Daniel Le would it be possible to remove instrument cluster only and have access to replace the steering coupler?
Daniel Le can you do a video
Daniel Le
I did mine too but now the car won’t start ? Do you know why ??
Daniel Le can you elaborate a little more on what you did and didn’t take out?
Hi Daniel can you explain at what point in video can fuse box be removed?
Thanks for the video , spent $9 on eBay, did it myself, saved 250 at the shop…. Thanks 🙏 again 1A Auto
do you have a vid for Santa Fe? it's not the same I have the column dropped but there's no "hook" do let it drop enough to expose the MDPS.
great video. i have been meaning to do this for a while and finally got around. in my case the previous coupler turned into this tar like residue. why they did not use a better plastic like nylon which is usually the material of choice for couplers like this?
ps. you left out the part where the column gains 100lbs when lifting it back into place.
What will happen if that plastic gear melt?car won't start or can't steering?
Very good video, much appreciated! Just finished changing out the coupler on my 2013 Sonata.
+g achon Thanks for checking us out. 1aauto.com
Which tools did you use?
Great vid. What a nightmare of a job. I don't think ill be doing this myself. Thanks for the vid.
Just did mine....this video worked for me.... Hyundai never mentioned to me that this was a recall....they wanted $400+ to switch the coupler out
what year is your vehicle?
Thank you for producing this informative video. I am feeling confident.
Great video. Very helpful that you call out wrench and socket size. 👍
+TheHouse Thanks for checking us out! 1AAuto.com
Did this yesterday on a 14 Santa Fe gls and fixed it but now my running lamps in the rear, trunk latch and rear blinkers don’t work. Any ideas? I’m about to go change some fuses and hoping that fixes it
Good job this is the most straight forward best camera views video on this particular job well done
This is under limited warranty and the Hyundai dealership fixed mine free of charge for my 2013 Hyundai Elantra
I replaced my coupler today, this video was helpful. I didn’t disconnect the steering column shaft. Instead I removed the necessary wiring and let the column drop. I used a 1x4 board from floor to seat and allowed the steering wheel to rest on it so it didn’t completely drop to the floor. I then removed the torx bolts and did the part swap. A little tight, but doable. 187K on my car and surprisingly the coupler didn’t look that bad, hardly any debris. But once everything was back together, I could immediately tell a difference, the steering play was gone.
Seems like every harness connector is different and some were a puzzle to disconnect. A couple had me stumped which cost me time. Hardest part was putting the column back in. Even with the metal hook it was difficult to lift it up into place while I was half outside the car and upside down. One tip: when I removed the motor I immediately marked the gear with a marker so if it rotated I could put it back to the original position when reassembling. If it gets turned to much there will be a code because the position sensor is off.
Mine is all done, no codes, no play, success. About 3 hours.
+BluesriderDF Thanks for the feedback!
What a great video, is it the same for Santa Fe 2014? Has anybody tried to replace it for Santa Fe? Thanks
Thank you so very much for this instructional video
I want to change it on a KIA Ceed 2011 model because I have this noise when you turn the steering wheel but my question is that rubber coupler needs a thin layer of lubricant like white lithium grease or silicone grease to keep the rubber in good condition or that lubricants can make any damage to the part?
I DID IT!!! I just did it on a 2012 Kia Soul and it's not to much of a difference. I had to take off the module in front of where the wheel connects to the steering. Also there were 3 screws holding the wheel in. Two in front and one on the back to the right. This video saved me from my god dang popcorn wheel.
+Blake Gravett Thank you for the feedback and great job!
Thank you 1aauto blessings you all
Helpful reference to follow, thanks!
I got an Asian car 2010 hyundai sonata with push start button car.would it be the same way to do it?how do we know when this plastic damage?any symptom?thx
Amazing!! Thank you very much for the great video!
+Ronald Langaitis Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Is calibration required after replacement?Does the esp light illuminate the abs light?
Very good video.... Clear to understand.. she makes it look so easy.. thanks
+John Willis Thanks for the feedback!
Hi guys is there a part for a 2015 sorento, cant find one anywhere
Hi. Thank you for the amazing video. After this process, my steering wheel is slightly tilted to the right, how do I fix it?
There is no need to totally take out the whole steering unit, just lower it down, there is enough space for taking off the steering motor
Fr??? Cause I don't want to be messing with allllllll the wires
you got a video or something to explain how? or???
Mine only clunks when changing directions if iam turning right then it clunks when I turn left and no more clunks until I go right again is that what this coupler does when it goes bad
@@ravenpalma7544 Heh. That'd be about the easiest part, really.....
Very helpful video but she didn't say after you put in all the labor, that there is a possibility that you will lose power steering and need to calibrate at a dealership or shop
I’m in the middle of this project on my 2011 Sonota. Coupler was reduced to just the hub as shown in this and other online videos. My biggest problem so far was lifting that steering column up and into place to get one nut started. That thing is heavy, awkward, and there’s no room to work. I watched other videos where they did not undo the spline and take the column assembly to the bench. I replaced the coupler with the column still inside the car. My column has a hook to aid in lifting the column into place, but again very heavy to lift and awkward. Ended up using some wood blocks to support the column to within less than an inch to use the hook. I was not able to get the passenger side bolt to catch so I’m leaving it out and lock-tighting the two nuts and one bolt. My next issue is the harness for the air bag connector (yellow) now doesn’t seen long enough to allow me to snap into place. Took a break for the night. Finish up tomorrow.
Greetings, excellent video, it helped me a lot. A ? When assembling it, I think that I rotate the gears when cleaning them and now I feel that to go straight I have to have the steering wheel a little to the left. How can i fix it?
Good video, very informative. 👍🏻👍🏻
Would there be any reason to grease the new coupler prior to installing? Haven’t seen anyone do it and not sure why/why not.
Is the set-up similar for the Elantra within the same years 11-14 ?
Excellent day! A question ... Do you have in Hobbs NM a place where they make repair?
Excellent tutorial! Thank yoi!
Great job. This seems to be the issue also with my 2011 Sonata.
Excellent work, and very professional.
Can I remove those first two screws before I disconnect the battery? Just because it would make it easier to turn the wheel? Have a hybrid so the key is down in the center console
great work dear
+Seth Acheampong Thanks for checking us out. 1AAuto.com
Great job, very detailed, narrating with extra tidbits. I saw that connector crack at 9:00 ;). Hey it happens lol.
Wow, thanks for the amazing video !!
+BluesriderDF Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent. Thank you for the video.
My GF Sonata has the Airbag/seatbelt warning light on before I performed this for her. She took it to a shop and they took it apart to inspect. Idk if in doing so they damaged the clockspring on the steering wheel. Would that cause that warning light to stay on or is it another issue with the SRS system? Ty
Call ask the dealer how much they charge it was 85 to check then will wave the fee if you want them to fix at their price. It was to much to put back up l have a bad shoulder two man job.
7:28 the front right mounting bolt that keeps the steering column attached to the body broke off. What can I do? It's still sturdy with the other 3 but I will need to replace it.
Anyone did this on 2016 Sonata? I have tried to do it but the layout is totally different. I cant find all 4 bolts that are holding steering column. I only find front 2 and cant lower it all the way to access the power steering motor. I also tried to look online but all the videos and forums have info on 2011-2014 models. Please help
I am facing the issue of occasional left pulling in Hyundai Elantra after calibrating the steering angle sensor as well, it is any symptom of bad flexible coupling..
Bravo c est très bien 👍🏽it’s very good 👏
+Sudine Babz Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Hyundai Dealer $540 plus parts. Me $30 and 2 hours w a bathroom break. Thank you, followed your video step by step, problem solved, car steering is back to new. Thank you for this educational well made instructional video it is greatly appreciated.
What year and model did you work on please, my 2011 different on wiring from video and one cord is still attached; I’m afraid it will rip out when column is lowered.
What the hell cost you $30?!
I paid $6 for the part, shipped.
Is this the same for Hyundai Elantra 2013 GLS
Thank you for the video!! I was able to do it in about 2 hours. The only problem is that after securing the steering column and connecting the wires the car has an alarm going off and the EPS light is on. Any tips??
+Edgar Loret We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. It could be just a blown fuse or there is something else wrong along that control module. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Is this video for the steering wheel locking for a second while driving Hyundai Sonata
After replacing and reinstalling everything back I’m getting some ECU errors via OBD2 connection regarding SAS calibration issues. Also my reverse camera is now not showing the steering path. The ECU errors are C1623 and C1260. What did I do wrong ?
9:00 Love it. also also, my coupler keeps getting shredded. its more frequent now that ever, why is that? 126000+ miles on mine 2011 Sonata.
cool vid.. got the part ordered..
thanks - this worked great
+GREGORY NELLIS Thanks for checking us out! 1AAuto.com
I got a 2013 Hunda Sonota. Got a knock in steering shaft when hitting bumbs in road. New one on me. Any suggestion. Thanks
+ We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
Excellent video, very professional technician. I just have 2 questions, 1, after replacing coupling, is it necessary to re-calibrate steering sensor or any other components? 2 what should I pay extra attention to, eg should the key be removed & to be careful not to rotate motor coupling while disassembled & any other critical points. Thanks again.🖒🖒
The factory service manual basically says to do the recalibration process after doing this on all the models I've seen anyway.
How do I do a recalibration
I’m having trouble lining up the lower column splines. I can’t pull the clamp up far enough to get a bolt in
Did you ever figure it out cause I can’t
Great job!
Great job thanks
Greetings 🖖 i just did this job on my Veloster 2013 everything is plugged in but now the power steering is not working, any help!? I appreciate it 🙏🏻
Great video! Very helpful! Also, tell me it's a poorly designed car without telling me it's a poorly designed car!
Really decent of 1A Auto to have such a thorough and well made video tutorial, when you consider the part that they're selling here cost what, a dollar?
*Edit- 1a auto, just looked at this coupler on your site. You've priced it at 21.00 ish.
You may want to revisit your pricing on this small plastic part.
Hyundai dealer sells them for
$1.00 -
Thank you tho for the excellent vid.
I have a 2015 Sonata Hyrbrid with Sticking / Binding steering with no lights or codes. Do you think it might be caused by a worn steering coupler??
+captivatingphotos We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
What's the best way to aling the steering angle if one pulls the steering wheel off the shaft.
Plastic gear, what was that car engineer smoking that day. Reminds of the plastic empellor in the VW golf water pump.
Yeap, damn engineers. They making every plastic intake, oil pans, no dip sticks for transmission fuild.
If my key is push to start, how do I loosen the steering wheel without starting when the battery is disconnected such as at 1:25 ? Will it react the same way even without the battery on?
It's my first time ever doing a procedure like this, and disappointingly I made some mistakes. One: I over-torqued one of the to steering wheel mounts and broke the mounting bolt off. However, the steering column still seems tightly secured to the frame. I do not know if I should worry to much about it.
But the second and bigger issue is: my steering wheel didn't lock when doing this procedure (although, I tried to lock it) and now my steering wheel is off-center. Does about know how I can fix those issues?
Did you ever figure out how to get it back to center?
The steering angle sensor appears to be in the column. An alignment should correct the issue.
Also: One of four bolts missing will seem OK until you're involved in a collision. That one bolt could make a survivable collision fatal.