Great review. I am the top salesman for ThinkCar ThinkTool Master 2 in South Africa and Africa sending your video to some of my customers and I hope they subscribe to your Mechanic Mindset online training
I have an Autel 908s and 4 months ago i bought a Thinktool Pro. It has been very very good,battery life better than the Autel and the coverage is very good. Bad points.... You cannot print to your PC directly . Worst thing is checking the history and locating the last time you had previously done a car,Autel wins that one hands down. All in all very happy.
Thanks for sharing you’re experience. I’ve not used the report feature properly yet. I tried on the Autel the other day as I wanted to see what control units a certain vehicle had (ie did it have MHEV). Unfortunately, it only shows the modules that had fault codes stored.
Same here just bought an s10, no previous vehicle history which makes it a royal PIA. Also no datalogging while using a combined graph. Otherwise good tool
Hello. You do an excellent job! I have experience with these scanners and what I can say is that Thinktool, Topdon or Artipad are all copies of the Launch brand. I say this because Launch was the first and then came these companies that belong to the same companies or had an agreement to use the software. If you look at the menu in the software, only different colors are identical. The one who remained unique is the Autel. I mean, these Chinese companies produce the same product with different names. I respect your work. 👍
Thanks YOYO! Yes it’s all Launch based, the ThinkTool Mini even said ‘Launch Powered’ when you turn it on. I think it’s branding mainly. Autel are doing similar now with Otofix… They’re all at it 😅
SUBSTANTIAL Mechanic Mindset Thanks for sharing it thank you very much take care and have a great day Mechanic Mindset From Nick Ayivor from London England UK 🇬🇧
It was AC Compressor Run In Protection. You follow the on screen instructions. It’s all good, the dealer tool used to run the same function after programming 👍
Darren I heard you say European vehicles. I’ve been looking at the launch X431 pro3+ and the thinktooll. They cost anywhere between 800 - 1100$ US. Will the unit you have show American and Asian vehicles. If so can you the exact model number. I’m sure it’s in the side bar I just haven’t finished the video yet Artie 😊
Hey Artie, I’m not certain for sure, but I know there are plenty of NA guys using these tools. Best contact Jay From Welding Junkie channel, he distributed in NA.
Hi Arthur and others reading this. The similar scan tool to this is the Thinkcar s10 canFD model which does secure gateway etc. it retails for about $1800
@@MechanicMindset correct S10 is USA version of yours vpn needed for programming and the s20 is the “TopDon max” “launch throttle 3” and Thinkcar Thinktool max”. The s10 comes in standard , CanFD & pro (j2534) comes with the pro.
Fantastic video, Darren, as ever, will see if i can get the ££'s together to purchase this tool,far cheaper than the IM 608 etc, Thanks for you great effort. 🙂, hope your 'moggy' is still about, haven't heard it intruding on any further video's lately 😊
I’m pretty impressed with the tool, quite similar functionality to the Autel. It’s difficult as there are so many options out there! Cat is fine 😁 I don’t shoot the video from my house anymore, we have a new workshop studio which I’ll show you round soon 👍
@@MechanicMindset ohh yes that would be great, Darren, can you take 'wednesday' there, sometime, i think she would make a PURRRFECT mechanic's assistance 🐱🙂 Lol
The TopDon Max is more similar to the ThinkTool Max. Basic features are the same as this Master 2/S10. Of course you get the oscilloscope added and a much larger unit. The ThinkTool Max is also getting the proper remote feature. Not sure about TopDon
I haven’t mate, but I hear these tools are really good with Ford. Give Alex a shout at Impact Diag, he’s really helpful and can advise better than me 👍
Hey Jamie, I have showed a few guys I work with who use Snap On (not sure which model). They were impressed with the ThinkTool, although I can’t comment myself
Hi, yes you can update the service record on the car but you will need to update the online record manually. Alex sent this video th-cam.com/video/kUY5-XLAo_g/w-d-xo.html
That's a very nice unit, mt Platinum S10 is in the mail. Can you make a small video of programming a used CAS unit to a BMW? Do you have a link to you app?
It’s an awesome tool! Really impressed me 👍. I’m not sure how soon I can get a programming video done, but I want to do some showing more. Check out MechanicMindset.com When you join the free trial we send the app instructions in the email 👍 Cheers!
Hi, I think you also need the tool that has the coding and programming option in the software. Best contact ThinkTool to see if they can help with your question
Yes and you have to come up with $1400 for it or more I do work as a mobile tech and work it just not paying to buy that kind of tool. It would be nice to have. But that kind or money is just out of reach. Sad to say it won't be and time soon for one or any other tools in that price the. $600 ones are even out of reach or paying my bills.
Hi, after playing with it more, there are a few things that are a bit in consistent. I have also found that some functions can be found in multiple places, so have a good look around. What other tools are you using for diagnostics? 👍
It looks very similar. I can’t see any mention of CAN-FD or BMW F-Chassis for the OBD dongle though which the ThinkTool has. I only had a quick look so not entirely sure; never used it before
Think the ThinkTool Pros and ThinkTool Master (S10 in North America) are different level tools. I don’t think the Pros does programming like the Master 2. Best contact Alex at Impact Diagnostics and he will be able to advise best 👍
Hmm, hard to say. I’ve not used the 906. I have used the 909. They have similar functionality, but each has its positives when working with different brands. The ThinkTool is much cheaper when it comes to renewing software after 2 years. Alex at Impact Diagnostics is a dealer for both and will be able to advise best.
@@andrewhill1161 please I'll love to know what the conclusion what.. Because that's what is on mind now.. Buying BTW autel 906 pro or think tool master X
@@MechanicMindset got me there. All I know is its 2017 Renault Captur 1.5 reg LS10UGH. The glow plugs have 4.4 v stamped on them and each injector showing 4.7v
@@jamesbarratt593 Ah it’s diesel, not sure on Renault, but I wouldn’t have thought anything. But I’ve never checked a Renault. You’ll need (I think) about 200bar when cranking before injectors fire
@@thesmartguy3523 And yet, Lunch has already begun to support in the line of devices of the series of the PRO. And in our time everything changes quickly. Remember Can,only 2-3 years and everywhere CAN.
I think the tool up from this may support it. This tool is Launch based 👍 Watch this space! It does support CAN FD and Ethernet so it’s up there with the latest 👌
There is a lot of content on TH-cam for cheap DIY scanners. Not much content for professionals and a lot of confusion as these tools are very expensive but some can do what others cannot. I'm always appreciative for videos like this.
Great review. I am the top salesman for ThinkCar ThinkTool Master 2 in South Africa and Africa sending your video to some of my customers and I hope they subscribe to your Mechanic Mindset online training
Great, thanks Kevin! It’s a nice product 👌. I have a ThinkTool playlist as I support the UK distributor too 👍
I'm considering buying a ThinkTool here in SA. What would be the best product on its range?
@@MrTTone ThinkTool Max (aka S20) is the top one. Comes with additional scope
Your content is super useful, thank you for taking the time to be thorough.
Thanks Dustin!
I have an Autel 908s and 4 months ago i bought a Thinktool Pro.
It has been very very good,battery life better than the Autel and the coverage is very good.
Bad points.... You cannot print to your PC directly .
Worst thing is checking the history and locating the last time you had previously done a car,Autel wins that one hands down.
All in all very happy.
Thanks for sharing you’re experience.
I’ve not used the report feature properly yet. I tried on the Autel the other day as I wanted to see what control units a certain vehicle had (ie did it have MHEV). Unfortunately, it only shows the modules that had fault codes stored.
Same here just bought an s10, no previous vehicle history which makes it a royal PIA. Also no datalogging while using a combined graph. Otherwise good tool
Hello. You do an excellent job!
I have experience with these scanners and what I can say is that Thinktool, Topdon or Artipad are all copies of the Launch brand. I say this because Launch was the first and then came these companies that belong to the same companies or had an agreement to use the software. If you look at the menu in the software, only different colors are identical. The one who remained unique is the Autel. I mean, these Chinese companies produce the same product with different names.
I respect your work. 👍
Thanks YOYO! Yes it’s all Launch based, the ThinkTool Mini even said ‘Launch Powered’ when you turn it on. I think it’s branding mainly. Autel are doing similar now with Otofix… They’re all at it 😅
One thing i know for sure it's a great tool
@@MechanicMindsetwaoo
I'm wondering if this is the same tool as the Thinktool Pros
Super helpful tutorial !
Thanks mate !!
Great tool , same as my Phoenix pro , defo my go to tool atm 👍
Great to know! I’m starting to get to grip with how all these tools compare now. This, I was impressed by. Especially for the money 👍
Yes it is very user friendly but package has a room for thermal printer but local dealer doesn't give it
Maybe contact ThinkTool directly and see if they can help 👍
my maximus 2.0 actually has that record ⏺️ /playback...and its a tool crom 2016! lol
Hi, it's been a while since you released this video. However, can you remember it this tool supported speed limit removal for vans? Thanks.
Want that one.
There's is some really cool tests you didn't do that I would have loved to see
For example,
Running the compression test
Lots of features, this video could go on for ever 🤣. I used to use the same feature on VW dealer tool. It was good, but not very exciting 😄
got the phoenix plus which is more or less the same(i think) Awesome tool and great review👍
Cool, gonna get my hands on some TopDon soon. I’m impressed with this tool 👍. What’s your favourite at the minute. Thanks!!
@@MechanicMindset Right now the TopDon is up there, Its the best bi-directional tool I have used so far :) Fairly priced updates too once expired!
SUBSTANTIAL Mechanic Mindset
Thanks for sharing it thank you very much take care and have a great day
Mechanic Mindset
From Nick Ayivor from London England UK 🇬🇧
Cheers Nick!
you did such a great job . can i still use it after 2 years if i don't want to update the software ?
Yes, supported
Bought a new one for 1400 euro. Great value....
Awesome tool, what do you like the most about it?
Brilliant introduction
Thanks! What tool are you using?
Great tool review .
اريد اخذ دوره على هذا الجهاز
Hi , thanks for your lecture ,my question you say say upgrade software is 600 euro 💶 per year after 2years free upgrade.
As I understand, 600 for 2 years (ie 300 for each year)
Good evening and very professional your videos May I have your opinion about the thinktool pad10 please? Thanks in advance
Why was the ac light flashing? Was the programming not done right?
It was AC Compressor Run In Protection. You follow the on screen instructions. It’s all good, the dealer tool used to run the same function after programming 👍
Darren I heard you say European vehicles. I’ve been looking at the launch X431 pro3+ and the thinktooll. They cost anywhere between 800 - 1100$ US. Will the unit you have show American and Asian vehicles. If so can you the exact model number. I’m sure it’s in the side bar I just haven’t finished the video yet Artie 😊
Hey Artie, I’m not certain for sure, but I know there are plenty of NA guys using these tools. Best contact Jay From Welding Junkie channel, he distributed in NA.
Hi Arthur and others reading this. The similar scan tool to this is the Thinkcar s10 canFD model which does secure gateway etc. it retails for about $1800
@@weldingjunkie Cheers Jay, so S10 is name in America?
@@MechanicMindset correct S10 is USA version of yours vpn needed for programming and the s20 is the “TopDon max” “launch throttle 3” and Thinkcar Thinktool max”. The s10 comes in standard , CanFD & pro (j2534) comes with the pro.
@@weldingjunkie Awesome, thanks for clarifying. I have a large USA audience (most of it 🤣 actually), so I can update descriptions and tags etc 👍
مرحبا عزيزي ..
هل تفيديني بشراء ثنكار باد 10 وهل يناسب في مجال عملي فني صيانة سيارات اسيوي أمريكي الماني صيني
Fantastic video, Darren, as ever, will see if i can get the ££'s together to purchase this tool,far cheaper than the IM 608 etc, Thanks for you great effort. 🙂, hope your 'moggy' is still about, haven't heard it intruding on any further video's lately 😊
I’m pretty impressed with the tool, quite similar functionality to the Autel. It’s difficult as there are so many options out there! Cat is fine 😁 I don’t shoot the video from my house anymore, we have a new workshop studio which I’ll show you round soon 👍
@@MechanicMindset ohh yes that would be great, Darren, can you take 'wednesday' there, sometime, i think she would make a PURRRFECT mechanic's assistance 🐱🙂 Lol
@@sollykhan2385 Haha, she’ll be off in to the fields
@@MechanicMindset POOR THING NEEDS EXERCISE and a bit of freedom too, Darren 🙂
Good job sharing
What the differences with topdon Phoenix max?
The TopDon Max is more similar to the ThinkTool Max. Basic features are the same as this Master 2/S10. Of course you get the oscilloscope added and a much larger unit. The ThinkTool Max is also getting the proper remote feature. Not sure about TopDon
Hi have you had a chance to try and fit a new lcm on transit custom
I haven’t mate, but I hear these tools are really good with Ford. Give Alex a shout at Impact Diag, he’s really helpful and can advise better than me 👍
Would it just complement or beat my Verus Edge?. All make workshop asking.
Hey Jamie, I have showed a few guys I work with who use Snap On (not sure which model). They were impressed with the ThinkTool, although I can’t comment myself
Hi Jamie, Yes would compliment it well. Drop me an email if you would like to discuss it anymore info@dldtools.com
hi can you update service date on bmw i drive ?
Hi, yes you can update the service record on the car but you will need to update the online record manually. Alex sent this video
th-cam.com/video/kUY5-XLAo_g/w-d-xo.html
I have the topdon phoenix plus looks identical software but don’t have the programming tab in settings.
Interesting, I think the software platform is quite popular.
ThinkTool make a unit down from this that doesn’t support programming either. I like it!
That's a very nice unit, mt Platinum S10 is in the mail. Can you make a small video of programming a used CAS unit to a BMW? Do you have a link to you app?
It’s an awesome tool! Really impressed me 👍. I’m not sure how soon I can get a programming video done, but I want to do some showing more.
Check out MechanicMindset.com
When you join the free trial we send the app instructions in the email 👍
Cheers!
Hi can u reset or deactivate the IBS on a BMW 2006 with that tool?
You can register a new battery. Is that what you mean? IBS - Intelligent Battery Sensor?
Is it ok to code key transponders
Depends on the vehicle I think
Question do I need the VCI to cod on my THINKTOOL if so we’re can I buy it and the cables like you have please let me know thank you great video
Hi, I think you also need the tool that has the coding and programming option in the software. Best contact ThinkTool to see if they can help with your question
Just picked up a Thinktool pro here in Canada. I appreciate your video and instructions on using it. (Yours is similar)
It’s a great tool! The softwares are quite similar across the range 👍 Enjoy!
@@MechanicMindset I was thinking there must be some similarities. Thanks again.
Yes and you have to come up with $1400 for it or more I do work as a mobile tech and work it just not paying to buy that kind of tool. It would be nice to have. But that kind or money is just out of reach. Sad to say it won't be and time soon for one or any other tools in that price the. $600 ones are even out of reach or paying my bills.
If you know what you’re doing, a $200 tool will help you diagnose most issues; this tool allows you take it to the next level ☺️
Which device you use to program
I have a Thinktool Master and it is not the best, all the features look good and most of the time try to use it simply said not support
I had the same issues with a x431 pro 5 couldn’t connect to most things and to have certain functions you needed to pay more
Hi, after playing with it more, there are a few things that are a bit in consistent. I have also found that some functions can be found in multiple places, so have a good look around. What other tools are you using for diagnostics? 👍
@@MechanicMindset Hi I am using Icarsoft, Autel MD808 and MK808BT Tecstream, JLR, Thinktool master, Thinkdiag, Ista and Xentry. Thanks for asking
Can it replace an AMDS 1.0 for Aston Martin and recode used modules?
Do you know if this tool can communicate in both global and generic OBD2?
I think it’s fine 👍
Just make sure you buy the tool for your region so updates work ok. My tools are locked to UK 👍
Very good
can this program ecm & tcm in a dodge charger?
How does it compare with Launch Pro 5 ? Is in the same range price
It looks very similar. I can’t see any mention of CAN-FD or BMW F-Chassis for the OBD dongle though which the ThinkTool has. I only had a quick look so not entirely sure; never used it before
@@MechanicMindset Thank you for the answer. I will do research to see witch one is the best buy
Will you need the msater kit to program or just the thinktool pros kit? Thanks
Think the ThinkTool Pros and ThinkTool Master (S10 in North America) are different level tools. I don’t think the Pros does programming like the Master 2.
Best contact Alex at Impact Diagnostics and he will be able to advise best 👍
Will do thanks. Love the vids
This software looks very very much like our launch euro tab.
I can imagine it is 😁. How do you like it?
have you managed to connect to mobile wifi hotspot?
Yeah, I used the mobile hotspot to download the files for the programming demo on the Mini 👍
im struggling to connect mine, doesn't even come up a a option
@@dancew77 Ah ok, can you connect to other networks? Also can you connect other devices to your hotspot?
yes finds other networks, my autel had no issues 🤔
@@dancew77 Sorry not sure, maybe try and contact them for support. It’s just an android tablet so should be straight forward. Hope you get it sorted 👍
Hi. Great vid. Do you think this would be a better, more in-depth machine than the autel 906 pro?
Hmm, hard to say. I’ve not used the 906. I have used the 909. They have similar functionality, but each has its positives when working with different brands. The ThinkTool is much cheaper when it comes to renewing software after 2 years. Alex at Impact Diagnostics is a dealer for both and will be able to advise best.
@@MechanicMindset Thanks. spoken to them this morning.
@@andrewhill1161 please I'll love to know what the conclusion what.. Because that's what is on mind now.. Buying BTW autel 906 pro or think tool master X
Hello, does it program BCM's, by a chance? Other than that, seems like a good tool for anyone that works on their own vehicle.
Yes it does, but it depends on the vehicles. It should do most
@@MechanicMindset What about a 2008 Chevy Express Van
@@patsuddarth1093 Sorry never tried. There are some great support groups on Facebook that might be able to advise 👍
@@MechanicMindset Oh ok, thanks.
I have ThinkMaster , Can I buy extra VCi module?
Hi Seb, sorry I’m not sure. Best contact ThinkCar directly. Do you have issue with your current VCI? Or want to register a new one? 👍
Mate what voltage ignition on would you see at injectors on renault captur 2017
GDI or port injection?
@@MechanicMindset got me there. All I know is its 2017 Renault Captur 1.5 reg LS10UGH. The glow plugs have 4.4 v stamped on them and each injector showing 4.7v
@@jamesbarratt593 Ah it’s diesel, not sure on Renault, but I wouldn’t have thought anything. But I’ve never checked a Renault. You’ll need (I think) about 200bar when cranking before injectors fire
@@MechanicMindset yep but ignition on and then checking to see the power at injectors. They show 4.7 volts. Not 12 v as I would expect. Is 4.7 correct
@@jamesbarratt593
Hello. Yes it is correct. Renault Megane same value.
It is a pity that does not support Doip
Doip isn't so mainstream as yet so....
@@thesmartguy3523 Nevertheless, Lunch has already begun to support. And in our time everything is changing quickly. Remember CAN.
@@rem8768 yeah, of course Doip will take over sooner or later but not just yet
@@thesmartguy3523 And yet, Lunch has already begun to support in the line of devices of the series of the PRO. And in our time everything changes quickly. Remember Can,only 2-3 years and everywhere CAN.
I think the tool up from this may support it. This tool is Launch based 👍 Watch this space! It does support CAN FD and Ethernet so it’s up there with the latest 👌
Yeah thats a very good scanner but expensive for diy. Lol
Oh for sure, this isn’t for DIY. ThinkTool Mini is good because you can pay a small price to add on the premium software for the costs you own 👍
There is a lot of content on TH-cam for cheap DIY scanners. Not much content for professionals and a lot of confusion as these tools are very expensive but some can do what others cannot. I'm always appreciative for videos like this.
Join the Free Training & Waveform Library here: www.mechanicmindset.com/free-access