*GO PRO'S OFFICIAL ANSWER ON HOW TO APPLY A STICKY MOUNT:* "To apply GoPro adhesive mounts please follow these 3 steps: Apply the mount to a smooth, and fully cleaned surface. A textured surface or any imperfections to a smooth surface can keep the adhesive from making a strong bond. Firmly press the mount into place ensuring full contact over the entire surface area. Be sure to apply the mount at room temp, and also allow at least 24 hours for the mount to properly adhere to the surface."
Thanks for posting this video. I have an old Hero 3 that I decided to start using again after sitting in a drawer for years. I mounted it on my arborist helmet.
nice vid! however idk if i did mine wrong, but instead of heating red cover, i took that off then heated the actual stick pad until that started bubbling then placed it. thoughts?
Are you entirely comfortable with using this mount in extreme cold weather? I've been told that the mounts tend to fall off in the cold. I just purchased a hero 6 black and I want to mount it right so I dont loose it while I'm snowmobiling
Im kinda late but i live in finland and there has been no problems for me. I used it on my helmet and it never came off or anything. Only the mount wore off but its not really related to the tape. So yea, should be no problems
Thanks 🤙🏻 Wasn’t sure what side went where on the pads. Big Help !!!!! The Red side or White side up or down... LOL
Same here 😁
Great idea to heat up the patch before application
Not gonna lie, I've been trying to figure out how you mount it for a while now. Thanks for the video!
I did not know I was supposa to heat the 3M 🙈
Thank you! Was having a frustrating time trying to remove the plastic from a new camera adhesive mount, the heat makes all the difference.
*GO PRO'S OFFICIAL ANSWER ON HOW TO APPLY A STICKY MOUNT:*
"To apply GoPro adhesive mounts please follow these 3 steps:
Apply the mount to a smooth, and fully cleaned surface. A textured surface or any imperfections to a smooth surface can keep the adhesive from making a strong bond.
Firmly press the mount into place ensuring full contact over the entire surface area.
Be sure to apply the mount at room temp, and also allow at least 24 hours for the mount to properly adhere to the surface."
Thanks for posting this video. I have an old Hero 3 that I decided to start using again after sitting in a drawer for years. I mounted it on my arborist helmet.
I really like these videos, keep up the good work!
Please increase the volume
Ok, make it warm. I never came to this idea. Thank you!
Thanks for the video! This really helped!
Now how to I get it off ?? I put it in the wrong place
Brilliant! Thanks for the vid. 👌🏻
nice vid! however idk if i did mine wrong, but instead of heating red cover, i took that off then heated the actual stick pad until that started bubbling then placed it. thoughts?
John Brennan don’t worry it really doesn’t matter.
Great video. Thanks!!!
I put the red side legit on fire and still didn’t come off why?
Thanks bud!
No problem!
How long to wait before using it.
Around 24 hours, lol, u commented that back in 2021 now it’s 2023
Is there a way to remove it safely or is it just stuck for good
I heated the Rubber and applied it on my Bicycle Helmet, how long do i have to wait so i can take it out on the road?
72hrs to reach maximum adhesive strenght
Thank you Sofia 😊
tryd this and cleand my 100%aircraft helmet and its still falling off with the gopro within 5mins
When we remove the go pro mount with sticky will damage our helmet ?
why not use hair dryer? Safe and really hot.
Can you do this without heating it?
you can but it doesn't stick nearly as much. heat is a key for it to work best
@@Rossxr i just stick it on my helmet without heating , will it fall off bro?
@@soorajantonyjohn909 maybe
Is that the gopro brand of sticky mount?
Are you entirely comfortable with using this mount in extreme cold weather? I've been told that the mounts tend to fall off in the cold. I just purchased a hero 6 black and I want to mount it right so I dont loose it while I'm snowmobiling
Im kinda late but i live in finland and there has been no problems for me. I used it on my helmet and it never came off or anything. Only the mount wore off but its not really related to the tape. So yea, should be no problems
Add a tether
Cold or heat they fly off.. lost my go pro hero 9 and media mod due to the heat.
Do you heat the yellow side too?
How do you take it off then? Like without damaging your helmet and all.
Late comment but I use “Goo Gone” to take the adhesive off
what about the white side?!?! I wish down voting was still a thing
Can u take them off?
Yes but they are not designed to