Chin Mount Fail - Fixing my ChinMounts.com GoPro mount that fell off my helmet with a little Sugru.
ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2024
- Believe the reviews of mounts from ChinMounts.com with they say not to use the adhesive they send with their mount. In this video we take a look at the failure I suffered as well as how to use Sugru to adhere the mount to a helmet.
Sugru 3 Pack on Amazon: amzn.to/3m6e26Z
Sugru Web Site: sugru.com/
Chin Mount: chinmounts.com/
Buy channel t-shirts and mugs! - teespring.com/...
Instagram - go.BHNWPercy.c...
Facebook - go.BHNWPercy.c...
Want to swap stickers or send something to Percy?
BHNWP
PO Box 1377
Lorton, VA 22199-1377
-- My Bike --
2021 Harley-Davidson Road Glide Special
• Custom paint
• Factory 47 12" Signature bars
• Legend Revo A rear suspension
• Legend Axeo front suspension
• Le Pera Outcast custom seat
• The Forge LLC 24" Sissy Bar
• Joker Machine Serrated Floorboards
• Joker Machine Highway Peg Mount 1-1/8" Offset
• Joker Machine Stubby HD Serrated Footpegs
• Joker Machine Mini Serrated Floorboards
• Joker Machine Serrated Shift Peg
• Joker Machine Serrated FL Brake Pedal Cover
• Joker Machine Stalker Shift Linkage Rod
• Kahuna heated grips
• Custom Dynamics ProBEAM Turn Signals
• Custom Dynamics ProBEAM LED TriBar Light - amzn.to/3BNC8Y9
• Custom Dynamics Magic Strobes RSG module - amzn.to/34UoPJh
-- Primary Cameras at the Moment --
• Nikon Z6
• Fujifilm X-100v
• Fujifilm X-H1
• GoPro Hero 9 Black
• GoPro Hero 8 Black
• GoPro Session 5
#RoadGlideSpecial #RGS #FiveDirtyBikers
Sugru is the best adhesive to mount camera‘s on helmets. Using for several years now. Love it!
Hey since your comment was from not too long ago I thought you might see this, I used sugru on my mountain bike helmet (full face with a chin mount, I mainly ride downhill and I did crash on my chin which may or may not have impacted the chin mount, this was a long time ago though and I kept using the mount after the crash and it was still sticking fine) and yesterday while I was mounting my GoPro the whole piece of sugru just came off, it's been on there for about 15 months or so, I was wondering if this is normal that it just stops sticking or something after a while, how has yours held up ?
@s-p_a_c-e I haven’t had a problem like that. One of my helmets I’m still rocking with a mount I used Sugru on is still going strong after 4 years. Did you clean the surface of the helmet before putting the Sugru on? Maybe that crash loosened it somehow?
@@withPercy yes I did clean it, pretty sure it has to be the crash that loosened it but still weird it didn't come off directly after
I've used Sugru for my helmet mounts, and not a single one has ever failed. Even my helmet that's 4 years old, the sugru adhesive for the cam mount is still solid.
Infact I used Sugru to double secure the Custom Dynamics light bar to my Fat Boy's rear fender, because it only had 3M Tape.
Funny you mention that. I noticed that one of bag light bars was coming a bit loose the other day and thought that I should re-install that with a little Sugru. It's a great alternative to tape. Especially the lower end tape products.
How much packs of Surge did you use for your helmet?
I had the same 3m adhesive tape failure with the ChinMount for my new Scorpion EXO AT960 helmet and a Hero 12 Black camera.
I'd also read online about the 3M tape not sticking to the 3D printed plastic camera mount, but held out hope that it might work.
The one for my helmet has two mounting points and, 30 hours after mounting it to the helmet, it was drooping down under it's own weight (no camera was clipped to it) and had mostly disconnected from the chin mount. The tape stuck well to the helmet, but not the chin mount.
So I ordered some sugru last night, and am waiting for it to be delivered today.
Ugh. That Sugru should work out for you. I just used it on a new helmet before leaving on the trip I’m on. 2K+ miles so far in heat and cold temps. The thing is on solid, for sure.
I had the same problem. My mount has two contact points as it bevels out for my modular helmet design. I had not read the reviews but I did use the tether thankfully - though I tether all my cameras for extra safety even if they had not sent one.
Mine came off the mount side as well mid ride after sitting on the helmer for 48 hours without a camera and then 30 minutes in it fell off. Helmet side was stuck solid. So I did what I always do - I used my own 3m VHB tape. Never had an issue with it on anything I used it on - until this mount!
Now I know plastics and I know 3D printing and I am nearly positive it is an oil issue with the filament they use. Plastics have oils in them which vent off over time. Certain plastics do this quicker than others. I believe theirs is venting very quickly which is causing an oily surface even after prep. After some time it should not be an issue anymore, but how long is unknown.
I think I may try the glue you suggested. I'm sure it will never come off then.
Still can't believe my prepping and the very good VHB tape didnt work - this is seriously the first failure I have ever had, and I have a heavy dash cam mounted with it on an uneven suface for three years now, hanging weight on the tape, not resting weight.
That theory of yours sounds like the most solid likely root cause that I’ve heard about this. Let me know how the Sugru works for you if you went that route.
I love that stuff. Thats what I use. Never lost an attachment yet. Its easy to pull off with some fishing line. Does not damage the helmet.
Yeah, it's really great stuff. I've had 3M adhesive loosen up in past when I've been riding in the heat of summer. Have never had that happen with Sugru.
My chin mount just fell off. The gopro side adhesive actually came off. The clip stayed on the helmet. The factory adhesive came off the factory mount. Helmet was just sitting there and, bloop. Just found this video looking for a better adhesive. Gorilla has a crazy strong double soded tape. Yes! Same thing that happened to you. Just fell off in my room.
Mine too! Hella annoying
Thanks for the video. I just purchased a Chin Mount and I was already planning to pull off the tape that they used. I am surprised that the tape fails because it is 3M VHB tape which is usually very reliable...but I go with the recommendations of so many Chin Mount users and I will use my own. I like this Sugru stuff...I have not tried it yet, but it seems like it would really bond well. My question is do you need to use so much? I don't want a big blob of that stuff hanging out, I want it to be clean like the tape would be. I was planning to use a strong spring loaded clamp to apply about 40 lbs of pressure and that is going to allow me to squeeze out that excess product and then use a soft nylon knife to clean up the edges all around the mount.
Let me know if you think this will work or if it needs to be such a thick wad of Sugru.
Thank you...and I love the design and graphics on your helmet!
The 3M VHB comes in varying adhesive strengths. I’m not sure what strength they were shipping when I bought my mount. You definitely do not need to use as much Sugru as I used here. I typically like to go thick to push my GoPro out a bit forward on my helmets as I have to twist my cameras to take them off and on since I use a Ulanzi quick release adapter. Plus I like to have the camera a bit further out so that I can see part of the GoPro screen to confirm that it’s on and recording.
I just had the same thing happen to me! You'd think for a product that claims to be the best in category would provide top tier adhesive! I'm gonna give this Sugru a shot.
The Sugru will work for sure. I just got a new helmet and I’m not getting another mount from them. I’ve also had a problem getting a few GoPro attachments to fit in their mount.
Never seen this type of stuff before, looks good
Same thing happened about 5 minutes ago to me. Heard a thump and went through to see my GoPro laying on the floor. Didn't see the reviews telling me not to use their adhesives
I think most of those reviews that I saw were on their web site or in forums. I think that most of the TH-cam reviews I’ve seen are by people who’ve been sent product from the company. I always try to provide open reviews based on my use of a product or service.
Same thing just happen to me going down the dam road man. I’m so angry rn
Ouch. Sorry to hear that. I haven’t had an issue after going back to my tired and true Sugru to mount it.
Yup. Unfortunately learned the hard way that the supposed "3M" adhesive they provide is not adequate. Lost my GoPro on mainstreet in rush hour traffic. Poor thing got ran over and is in pieces. Its funny though chinmounts included an extra piece of plastic with a cheap string i guess i was supposed to tie to the GoPro, but of course it has the same adhesive so i doubt that would have saved it haha. Almost like they know their chit don't work.
I think the fact that they give you the tether should be a signal to us about that supplied adhesive. 🤣
You think ride moto tech mounts will work?
Nice to see you back on the screen! Never seen this stuff (will have to see if it's in UK) but looks cool though I would have to put some trust in it as it just looks like it would drop off like some kind of putty 😅
How is the Ruroc 4.0 working for ya? I'm interested but have been watching a lot of reviews and like your unbias opinions.
Took all the steps, fell off 2 days in a row after install. I resin cast My own on a different helmet a while back, used My own 3M tape and it never fell off.
Salute
That sounds like the best way to go if you’ve got the stuff to do it.
The sugru fella off ?
@@asha7244 I've never used sugru.
Salute
Same exact thing happened to me. Unfortunately I was on the interstate and my GoPro was never to be seen again 😩
NOOOOOO!!!! I grimace every time I see someone's video where they are talking about how they just put the mount on and used that tape that they provided.
Guess I'm lucky my chin mount lasted a little over a year now but I can see the adhesive coming loose from the same position yours broke free at. Just order the sugru. I tether my camera to my helmet so I don't lose my camera
Let me know how the Sugru works for you.
I just ordered one of these mounts, but the website says they use 3M vhb tape. Did they improve the type of adhesive after this video ?
I bought one of their mounts a whiile a go and it lasted about 4-5 months of riding before it started to fall off. I emailed to tell them what happened and they said that they would send me some replacement tape so i can stick it back on. Which they have yet to do.
My Cardo has also started to come loose from whatever they used to stick on, So i've bought the 3M VHB Tape to test it out, since it is still kind of tethered to my helmet through the headphones so I do not need to worry about it flying off.
So far so good i've had it on for about 8 months now, no issues. Hopefully you'll have no issues as well
Yeah, their site said the same thing when I ordered mine. 3M makes several different types/strengths of VHB tape. Given all of the people who say their mount has fallen off, I'm going to assume ChinMounts supplies the cheaper variety.
@@withPercy the tape on my mount was really loose when I received it, it came off without any effort... so i did not feel safe attaching my 400 euro camera to it. I believe that this might be due to temperature variations during transport (airmail ?). Anyway, I sticked mine on with some Sugru and that seems to work.
Attached mine with stock adhesive today. Good thing winter is coming so it possibly won't come off while riding if it does... right?
I would still be careful. Replacing what they provided with your own 3M or Sugru solution would be easy enough to protect the investment in your camera. But let me know in a few months if the stock stuff is still working for you.
@withPercy here I am 6 months later and yeah... is starting to fail. I noticed that it's starting to separate from my helmet and on the side with the actual mount, not on the side closer to my helmet. Definitely going to change it out soon before I lose my camera.
That seems to be the common point of failure that I’ve heard from others. The adhesive fails on the mount side. Are you going to try the Sugru?
@@withPercy I believe I am. If it's as sticky as you say, I'd have no problem having it stuck to my helmet especially going down dirt trails. It makes me wonder if chinmounts isn't properly cleaning their mounts or having a clean enough area before attaching their adhesive.
Same thing with my lux helmet dint even hold had to use sugru worked well then looped out on a wheelie and off it came so I used jb weld (looped agin) but stayed on. I recommend jb weld for a more permanent option
Can i glue around the already installed chin mount with the sugru?
You could. Not sure how much more secure that would make it but you definitely can do it.
Damn I thought 3m is what chin mounts use but for piece of mind ill use some of this plus the tether
Not sure what supplier they use. But it’s noticeably weaker than the 3M you can get off the shelf.
Definitely do not use their tape. I'm doin' 65 down the highway. Sh!t falls off and luckily lands in My lap. $35 for the mount plus you gotta buy extra stuff.
Salute
@@BangChief_AllIsOneso what do you use now? I’m thinking of ride moto tech
@JimyOfficial I bought 3M tape but, I resin cast My own mounts. It's too easy. Plus, I can make it look however I want. Straight custom. Too easy.
Salute
@@BangChief_AllIsOneman my chinmount flew off today! Thank God I had a case on it! Ordering sugru right now
Is sugru easy to remove
I’ve only had to remove it once and didn’t have any issues. I think there is a help article on their web site about how to remove it. I removed mine by heating it up. As you would with 3M.
Sugru is awesome!
Yes, it is! Thanks for watching.
Bro my GoPro fell off helmet cuz their adhesive smh, I got the ruroc too! And I bought sugru. I emailed chin mount saying wtf what’s up with shit tape and they sent me a free one but ignored my question why their tape sucked.
From what others are saying, that's their answer. Here... have another piece of the tape that failed before. How has the Sugru worked for you?
sick tagg
So glad you wasn't doing it kn my lid lol
I just ordered a chin mount and I’m already hesitant about using it.
The mount has been solid since I put it on with the Sugru. I would toss the tape they provide and use your own 3M. I'm sure you'll be fine with that.
How is it working? I’m thinking of going with ride moto tech
@@JimyOfficial it’s holding up well and no problems from it , but I do run a very small ziptie through the gopro connectors and I have that zip tie connected to another zip tie that goes into my chin vent and down around below the helmet so I have it secured to my helmet in case the sticky foam pad comes loose , definitely worth the buy as it has changed the look of my videos for the better
@@UpperCut2YoFace9 days later, going down the road and boom go pro hits the ground from my helmet. Thank God I had a media mod over it.
I just put super glue. Not dealing with it again
Yeah… once is enough dealing with that problem.
😎👍