How to make a brake pipes like a pro very easy !!

hi everyone i wanted to show you how easy it is to make a brake pipe and what better to show you than on the ford capri laser as its brake pipes are super easy and straight forward to make so follow along and yoy will be a pro in no time
thanks for watching
this is the flaring tool kit
www.ebay.co.uk/itm/LASER-TOOL...
check out my instagram retro_cars_reborn for more photos and videos
thank you for watching
remember to subscribe and hit that notification bell to keep up to date

[@billywhizz98]

Great video and advice I bought some pipe and fittings when I did my brake servo on my escort just as well as it did what you did try them before you put them on the pipe as they where metric instead of imperial

[@RetroCarsReborn]

@william walker nice one yes had that problem on a fiesta once built it all came to fit it god damn imperial 🤣🤣

[@billywhizz98]

@@RetroCarsReborn what made it worse is when I went to the shop I gave them a couple of the ends of the pipe with the thread and told them is was an imperial threads for a classic car he put all the bits in a bag so I didn’t think to check it was only later on when I come to fit them realised they where the wrong size I ended up using the old ones

[@mufuliramark]

To measure how far out the copper pipe is to protrude, you're supposed to use the thickness of the collet as the measurement.

[@ryanfaulkes7469]

Reaching end of life? In Canada that still looks mint.

[@nv1493]

Older video, but still applicable. I use 1/4 in soft tubing to copy or design brake lines. It bends like a brake line and measures out pretty accurately.
Totally agree with cut-to-fit brake/fuel lines vs. store bought run all over the place, poor appearance.
I also make fuel lines with ANSI flares/fittings, using the Rigid flaring tool. Not affiliated. Perfect leak proof connections.

[@Beardchanics]

Nice tutorial man, looks quite sharp when done and fresh!

[@RetroCarsReborn]

@beardchanics garage yes my friend and the massive ones that go from front to back are just as easy to do 👌 no doubt you will have to tackle one on your mx5 at some point the audi's will last forever 🤣🤣

[@DiegoLopez-ii7ve]

Thanks mate! Soon i'll need to do custom Brake lines for My '59 GMC & I can tell...no need to look for more data.
This is a great video!

[@RetroCarsReborn]

Thank you very much glad it helped you out👍

[@ChinonsoChukwuebuka]

Can someone please give me the nam that instrument thst was used to produce the pipes

[@garyscarstuff]

Just found your channel via Faro Iron & Customs. Subscribed!

[@RetroCarsReborn]

@Gary's car stuff thank you for subscribing mite I add excellent channel name you have 👍

[@garyscarstuff]

@@RetroCarsReborn Thanks!

[@melvis2017]

Thanks for the great job very simple and easy appreciations. If you move the music from the video that will be so great to concentrate.🇩🇰👍👌

[@ClearStreamsUK]

Cheers matey! I bought a kit of ebay...no instructions🙄

[@RetroCarsReborn]

Manufacturers like to do that it's like there new thing 👍

[@bucklercarskarts2075]

You mention a male double flare but no information about when this, rather than single flare, should be used.

[@Rick-Williams59]

Tell me that's not a pure copper line, and if it is, you're just using it for demonstration purposes only.

[@stevenprice2894]

Unfortunately the UK generally uses copper brake line. You can get copper nickel. It's just rarely used.

[@RetroCarsReborn]

Yes thay are but I do paint them when fitted 👌

[@dannyjackson915]

​@@RetroCarsReborn Hi what do you use to paint the pipes after???

[@RetroCarsReborn]

@@dannyjackson915 you can paint them with hammerite or spray them green like most manufacturers would of 👍

[@thurgogopro5338]

Would have.

Use a string and measure the old pipe and then transfer that to the new pipe. The way he does it just isn't that accurate, IMO.