Well seems original part modified, considered better then Chinese made low end parts, sometime these are not even available as we still have BEDFORD trucks on our roads. But a zercks fitting would be nice as with out grease this won't last and even cause noise. I think he would have oiled it from upper part and greased it with boot on.
Es un trabajo más que excelente, ojalá que muchos mecánicos siguieran haciendo éste tipo de trabajos pero desafortunadamente quedamos muy pocos 😢 Felicitaciones 🥳🍾
A cheap replacement knuckle from China is under 10 bucks! The legal ramifications when this repair fails is enough to make anyone cringe! I must say though your craftsmanship is outstanding. But keep in mind this is a part just waiting to fail.
Pretty sure this is Pakistan they try to fix everything like broken in half crankshaft,diff gear that doesn’t meant to be fix and I understand that they ain’t got much money to buy a new parts.
Has no business on American roads, but I guess in the low speed melee traffic of India, it’s okay. Amazing how much labor that guy puts into a part that costs too much at $20-$30. I hope this country doesn’t devolve into that kind of necessity in my lifetime.
Да надеюсь ему в попу вставят этот рулевой наконечник пальцем вперёд а резьбу нагреют до бела что бы не вытощил. Зараза резьба прослаблена гайка не должна болтаться, палец вставляется с сухарями или втулочками в корпус и под пружину ставится пятак и как вы подметили нет смазки
Что за дикость и неуважение к "кормильцу", стучать кувалдой по станку. А про наконечник вообще лучше молчать, смазки нет, с таким перегревом и пружину можно "отпустить". БРЕД.
gotta give him an A for trying. No Grease, No Clean out, and No rubber seal :)
Good process restoration tierod joint Ball 👍
Ghanta good process bewakoof 100 ya 120 RS me new tie rod end mil jaati hai hamare yhaa kon itna time waste krega jaahil aadmiyon
Well seems original part modified, considered better then Chinese made low end parts, sometime these are not even available as we still have BEDFORD trucks on our roads. But a zercks fitting would be nice as with out grease this won't last and even cause noise. I think he would have oiled it from upper part and greased it with boot on.
I thought it was great and I watched it
Good very informative video🥰🥰
Es un trabajo más que excelente, ojalá que muchos mecánicos siguieran haciendo éste tipo de trabajos pero desafortunadamente quedamos muy pocos 😢
Felicitaciones 🥳🍾
Опускаем фразу нахрена.где техника безопасности? Я запомнил этот наконечник я его не куплю.а мастеру за рационализаторство уважение.
Quá tuyệt vời đồng nghiệp 🥰
I am no lathe expert but did you actually eyeball the shape or did you have any kind of template for accurate measurements?
It's self clearancing
@@Cervixdestroyer3000 Sorry I forgot🤦♂️ Thicker grease will fix the gap😂
It's CNC....Can't Measure Crap....
Eu nunca andaria em um veículo que tivesse um terminal de direção soldado.
Toda vez que entra em um carro você pergunta??? Kkk
En camioneta me duraban hasta 20 meses sin torno bien engrasado y enfriado PERMANETE al soldar de nuevo
A cheap replacement knuckle from China is under 10 bucks! The legal ramifications when this repair fails is enough to make anyone cringe! I must say though your craftsmanship is outstanding. But keep in mind this is a part just waiting to fail.
Exelen
Espetacular ?o cara é fera .
holy $hit , do you know what arc welding will do to the material let alone trying to turn a ball without a ball turnng attachment. is this India?
Pretty sure this is Pakistan they try to fix everything like broken in half crankshaft,diff gear that doesn’t meant to be fix and I understand that they ain’t got much money to buy a new parts.
when ever you see something crap like this you just think this can be happend only in india ..... grow up dude...😀
Смазывать забыл
Agree. You gota be kidding that you can turn a perfect sphere by eye.
He hecho esos trabajos toda mi vida, y nunca ha habido problema, solo que hay que utilizar los correctos materiales.
Good work
O cara é muito bom mesmo.
Vanio de Goiânia
If i got caught doing this kind of butchering in a tie rod end like this in my country I would be criminally charged.
دكتوره
Creo que ése tipo de trabajo son permitidos donde hay sobrepoblacion.
Thats nice, now how do you grease it?
Drill a hole, insert grease zerk of your choice…then grease it.
A grease fitting should have been installed before welding the cap.
У меня так-же возникла мысль.
Скорее всего такой палец у меня разорвало пополам, слава Богу на первой скорости.
Храни Вас Господь.
@@RASAllusion делаешь делай до конца, тем более показываешь весь процесс.
Its a steering rod!! Only the thing that keeps your vehicle going in the right direction? They're not expensive, even in Asia!
Bater com um martelo em uma peça em cima do barramento de um torno ?
Hey Willie no le pusiste grasa, le hubieras hecho rosca para una válvula de engrase
Шар то не идеально круглый , или так сгодится
Has no business on American roads, but I guess in the low speed melee traffic of India, it’s okay. Amazing how much labor that guy puts into a part that costs too much at $20-$30. I hope this country doesn’t devolve into that kind of necessity in my lifetime.
How much liter have 2 liter 3 liter?
Абышто а не восстановление. Могли бы сразу заварить намертво было бы почти тоже самое.
Para hacer todo eso es mejor comprarla nueva, sale más costoso hacer esa reparación, a no se que no la haya en el mercado
Noy hay nueva menso. Piensa
Now put a grease zerk in the bottom and pump it full of grease
Khoan dấu mở boi trơn, chống mài mòn 😲
Без солидола будет работать PS нафиг надо
Да надеюсь ему в попу вставят этот рулевой наконечник пальцем вперёд а резьбу нагреют до бела что бы не вытощил. Зараза резьба прослаблена гайка не должна болтаться, палец вставляется с сухарями или втулочками в корпус и под пружину ставится пятак и как вы подметили нет смазки
@@АлексНиколаев-г4ф то что вы написали выше:- я заметил PS юмор
To estaría perfecto si no la soldaria
No new ball joints in Pakistan either....The day I see a Mig or Tig welder in one of these videos.....
It will last only 1week in bad roads😂
Parece ser genial lá reparacion
Cumpără unul nou! Nu te poți juca cu siguranța circulației!
I bet life is cheap where you live.
А где полимер?
Y la lubricacion-??
Y, si no la engrasan en una semana de vuelta a reparar🤦
Combine this with people walking alongside the roads and you have a recipe for disaster.
Mala reparación la tapa no se suelda se repuja cómo de fabrica .
if DIY and its yourown its good but if you are paying for it better........ buy a new one
اهم عنصر في المفصل هو الشحم لذا فإن عملك هذا كارثة
,🙏💯
Đang nhe phải tôi cho cung
You were supposed to put some oil for her to make
Why bother? I mean… that’s the difference between it lasting 15 weeks and 12 weeks.
Что за дикость и неуважение к "кормильцу", стучать кувалдой по станку. А про наконечник вообще лучше молчать, смазки нет, с таким перегревом и пружину можно "отпустить". БРЕД.
خطر dange
Dangerous and not worth the effort
why would you waist your time doing that on a part so cheap to buy new
Не павтарать!
на сухую? жесть
Le faltó la grasa
Не обов'язково вибивати наконечник на станку
может кого то удивлю, но из говна можно сделать только говно
Y LA LUBRICACION?
хрень полная 👎нет абсолютно ни какой смазки,через месяц эксплуатации всё нужно делать по новому...
на мес хватит