Thank you for watching! I like my builds to be super clean and wires to be neat and tucked away where they cannot be seen! The black skids definitely make it look good!
The 470 is a fantastic model! Great choice as a second model. If you get one I would recommend getting a iKon 2 FBL unit for it. That is the best FBL in my option. Super easy to setup and simple! You get rescue as well as auto level.
@@thedonnyman1 is it possible? Yes, what I do it? No. The 636 is a terrible FPO unit, it is not great whatsoever serious tipover issues as well as no real tuning and not the best flight performance. The 470 combo comes with a microbeast. Personally I would go iKon 2 and have the best FBL in my opinion.
@@westhobbiesrc8051 loving flying the heli only been learning for about 2 and a half month can hover in all directions and toddle along from left to right it my turned I am struggling with,could you please do a video on how to learn to turn like a nice bancked turn thx mark.
@@westhobbiesrc8051 would be nice if you can measure that :) the reason why i ask is because i was thinking if i could 'stretch' it later and put 420mm blades later when i will want to modify it. But i noticed most of 420mm blades come with 10mm thickness, though i was able to find some 5mm thickness blade.
I just bought this helicopter with the super combo electronics , I am having a hard time figuring the microbeast plus especially finding a cheap receiver/ satellite for it. Any good receiver/satellite you would recommend?
What radio are you using? Spektrum? If so any DSMX satellite will work. Horizon hobby is where I buy mine. About $35, you plug it right into the side of the microbeast.
@@westhobbiesrc8051yes its spektrum, I actually bought spm9747 for it, I can get it to bind but I can't seem to go into failsafe. It's is hooked up just like it says on the manual.
@@westhobbiesrc8051 thank you Im gonna order that now wasn’t too sure what to get. I have an old ar500 around I was gonna use and switch the second aile channel digitally to aux1 do I think that would be possible, It’s a full range dsm2 receiver
Man! I need to up my wiring game! Again needed this video today! Appreciate what you do! Also those blade skids are legit!
Thank you for watching! I like my builds to be super clean and wires to be neat and tucked away where they cannot be seen! The black skids definitely make it look good!
Great looking pretty good clean rebuild looking nice dude..
Thanks buddy!
Thinking about getting one of these heli,as my second heli,as I am learning on the fusion 270 a supa little heli.
The 470 is a fantastic model! Great choice as a second model. If you get one I would recommend getting a iKon 2 FBL unit for it. That is the best FBL in my option. Super easy to setup and simple! You get rescue as well as auto level.
@@westhobbiesrc8051 hi is it poss to put a AR636 RX in the trex 470 likr the one in my fusion 270 thx mark.
@@thedonnyman1 is it possible? Yes, what I do it? No. The 636 is a terrible FPO unit, it is not great whatsoever serious tipover issues as well as no real tuning and not the best flight performance. The 470 combo comes with a microbeast. Personally I would go iKon 2 and have the best FBL in my opinion.
@@westhobbiesrc8051 ok thx for the info but not had the tip over issues on the fusion 270 it fly great loving it thx mark from the uk.
@@westhobbiesrc8051 loving flying the heli only been learning for about 2 and a half month can hover in all directions and toddle along from left to right it my turned I am struggling with,could you please do a video on how to learn to turn like a nice bancked turn thx mark.
I would like to ask what is grip size (inner) for 470LP? Would it fit 5mm thickness blades or only around 4.6mm?
I would have to Measure that, I’m not sure off the top of my head but any 380mm Blade that I have tried works.
@@westhobbiesrc8051 would be nice if you can measure that :) the reason why i ask is because i was thinking if i could 'stretch' it later and put 420mm blades later when i will want to modify it. But i noticed most of 420mm blades come with 10mm thickness, though i was able to find some 5mm thickness blade.
I just bought this helicopter with the super combo electronics , I am having a hard time figuring the microbeast plus especially finding a cheap receiver/ satellite for it. Any good receiver/satellite you would recommend?
What radio are you using? Spektrum? If so any DSMX satellite will work. Horizon hobby is where I buy mine. About $35, you plug it right into the side of the microbeast.
@@westhobbiesrc8051yes its spektrum, I actually bought spm9747 for it, I can get it to bind but I can't seem to go into failsafe. It's is hooked up just like it says on the manual.
And where can I find that servo connector kit?appreciate it
Amazon, you can get the full kit servo connectors wire and crimper for around $50
@@westhobbiesrc8051 thank you
What receiver is he running? Thanks
Same as me, just a DSMX satellite
@@westhobbiesrc8051 thank you Im gonna order that now wasn’t too sure what to get.
I have an old ar500 around I was gonna use and switch the second aile channel digitally to aux1 do I think that would be possible, It’s a full range dsm2 receiver
Dude can i send my blade 400 for a rebuild.
Yes you can, send me a email and me can talk about what needs to be done. Choppers992@hotmail.com
That yellow connector is hideous.
If I were you , I would have done a black one.
The xt60? You won't even see it when the canopy is on
Ummm I wonder who said the yellow XT60 had to go!? Lol
@@raihanmiah7162 inside joke
That’s Ed ( owner of this heli) I told him the yellow XT60 is ugly and gotta be changed for a black one to match.