I installed this on my (new) 16 Street Bob after changing mufflers. The bike ran 100% better almost immediately. No obnoxious decel popping. I keep it mounted to change gauges now and then, and it doesn't require a smartphone or other device. A great add-on.
I'm buying an exhaust end of the month then getting the gadget next month and putting it on my street bob.....your laugh has made my mind up I'm getting the Dyno pack😂😂😂😂😂😂😂😂😂 I'm keeping my 114 filter on as that's already stage 1 applicable, then next year im getting the stage 2
Hope that Texas weather treating you well. Haven't uploaded in a long time, been busy. I decided to sneak out of the box nd do a short preview of things to come. but mostly in reply to this video of yours that still makes me grin when I remember how much fun it is when something actually works! God Bless Ride Safe and Keep on Keeping it real!! upload be done in about 20 minutes, using the cell phone!! Peace!!
I TOO am a Texas Harley Rider. Weird... Anyway, I'm gonna drop the coin on the Power Vision in preparation for a cam swap in the near future. Looking at S&S 570 cams which will work great with a 107ci build.
@@texasharleyrider7424 finished dropping jugs and pistons on my softy last night. S & S Side Winder 100. Went with the default 585 easy starts. Cam chest done also S & S. Will try and do a quick video. My channel been dormant awhile. Got bad health couple yrs back. INCOMING!. God Bless!
Now install target tune with the wideband O2 sensors and fire up autotune, that 96” is gonna surprise you. For now you can run basic autotune and still see a few extra HP improvement. But be careful man, it’s a crazy deep rabbit hole that will keep you smiling. 👍
Nicely done video. But it was very weird watching it. I also have a 2011 Sedona Orange Wide Glide. One of the seats that I have is a black Mustang day tripper and I also have the Dynojet power vision. I used the Kuryakyn 1.25 handlebars mount For the power vision screen.. The screw holes on back of the power vision lineup perfect With the plate that comes with the kit. I also used to have the big sucker but when I build my engine I damaged it so I switched it out for the Harley Davidson heavy breather. From time to time the Engine idle becomes a little Erratic. if you have this problem simply reset the learn Fuel trim.
Thanks for the comment. I just used a combination of my ram mount and the supplied mount that came with the power vision. Only downside so far to having the 1.5" bar diameter. May have to look into the kuryakyn to see if they have the one for me, thanks for the heads up.
I know this video is a few years old but I have to know, what gauge is that? Where can I get it? I have a 2011 wide glide with factory gauge and I need yours
It is a Harley speedo/tach combo. Can order it online or at your local dealership. Here is a link to check it out. Ride safe 🤙 www.harley-davidson.com/us/en/shop/combination-digital-speedometer-analog-tachometer/p/70900274
I would think so, how much would be debatable. I’m sure the slip ons are less restrictive than the stock exhaust so changing the tune would likely get some noticeable results. If your on the fence, give fuelmoto a call and they would be able to tell you what to expect. If you purchase from them, they will send it with a tune loaded to your bike specs.
Best I can tell you is to contact Fuel Moto. If you get the power vision from them, they will install a custom tune to your bikes specs. Will definitely wake it up. Thanks for the comment!
Sorry for the late reply, several on here that I never got a notification for. It’s not stock, it’s the aftermarket from Harley. Color adjustment and a gear indicator as well.
When i update my powervision will it give me a map thats close to what i have for my setup? I have a basic stage 1 upgrade on my bike. I have a 2009 ultra classic, 96ci, stage 1 air cleaner. 4" cobra neighbor hater slip ons
By update do you you mean software or map for the bike? I bought mine from fuel moto and they made a tune for the exact setup on the bike. If this is the first time setting it up on the bike, and you didn’t get a tune pre programmed with your specs, you can just download one of the listed tunes for your bike closest to your setup. After you’ve done that you can always run an auto tune to better fit your application if needed. Hope this helps.
Initially I was going to, but decided to run it a while first. Its actually not too bad now, maybe I'm just used to it. When I get time, I plan to run some auto tune sessions and see how it works out.
Great video!!!...Do you think this bike would be good for a person who is 5'5"? Would they be able to reach the forward controls with no problems? Thanks
Thanks! As far as the bike fitting a person your height, I can’t answer that. I will say a friend of mine is 5’ 9” and he sat comfortably but legs were almost straight. I would have my doubts but also depends on your inseam. Best advice is to find one at a dealership to sit on or find someone around town. Would be awkward but once explaining your situation I’m sure they would let you throw a leg over. You can buy a reach seat that will push your position forward or even put a set of mid controls on and one or both together would get you where you need to be. Good luck and ride safe 🤘
@@texasharleyrider7424 thanks for the info! I will definitely consider the two modifications you mentioned if i end up getting one and i need to make it a better fit for myself, i love that bike!
I am looking at getting the power vision to replace my fp3 but don't want to mount anything to my bike after tuning u can disconnect it from your bike?
That is exactly what the creator of this video did. Just flash the preprogrammed map to the ECU, unplug the Power Vision tuner, and go ride.You may want to leave it installed for a few riding sessions though in order for the autotune feature to sharpen the newly installed map and tailor it to your riding conditions. Then you can remove it and your new map stays programmed in the ECU or you can leave it permanently mounted in full view and use it as an engine instrument display panel.
I never had any actual numbers to go by, only feel. There was a slight improvement in throttle response, torque did seem to improve as well as mileage. Maybe 3-6 mpg. I’m actually selling the bike tomorrow and so I put the fp3 back on since I can use the PV on another bike. Definitely noticed that it didn’t “feel” quite the same.
Love the way you start laughing uncontrollably with glee once you get into the throttle.
Haha yeah, it took me by surprise. Really wasn't expecting that much of a difference. Thanks for the comment.
Every guy knows what that laugh means!
@@phillipdavis8222 My thought exactly. His first laugh and I was like "He loves it."
I agree 100% with you! I just got the Power Vision and my Heritage is running perfect. I also love the way it managed the idle!
I installed this on my (new) 16 Street Bob after changing mufflers. The bike ran 100% better almost immediately. No obnoxious decel popping. I keep it mounted to change gauges now and then, and it doesn't require a smartphone or other device. A great add-on.
did you change the air cleaner as well as the exhaust?
Was contemplating between the FP3...I just made my decision to go with the Power Vision...thanks Texas Harley Rider!
Right on man!
I'm buying an exhaust end of the month then getting the gadget next month and putting it on my street bob.....your laugh has made my mind up I'm getting the Dyno pack😂😂😂😂😂😂😂😂😂 I'm keeping my 114 filter on as that's already stage 1 applicable, then next year im getting the stage 2
Sounds good man, glad I could help 🤣
Hope that Texas weather treating you well. Haven't uploaded in a long time, been busy. I decided to sneak out of the box nd do a short preview of things to come. but mostly in reply to this video of yours that still makes me grin when I remember how much fun it is when something actually works! God Bless Ride Safe and Keep on Keeping it real!! upload be done in about 20 minutes, using the cell phone!! Peace!!
Dude I have watched this video 100 times ! Hilarious…. She woke up huh?
Good to hear! Yeah, it was definitely noticeable 🤣
@@texasharleyrider7424 I’m gonna get a power vision for my 2018 Breakout. Thanks for the video and laugh.
I’ve got a 16 now, with the same powervision. Enjoy it and ride safe 🤙
I TOO am a Texas Harley Rider. Weird... Anyway, I'm gonna drop the coin on the Power Vision in preparation for a cam swap in the near future. Looking at S&S 570 cams which will work great with a 107ci build.
Gotta Love the sound of somebody getting a Happy Laugh Fix when the Bike gets corrected~~~!!
Was definitely money well spent!
@@texasharleyrider7424 finished dropping jugs and pistons on my softy last night. S & S Side Winder 100. Went with the default 585 easy starts. Cam chest done also S & S. Will try and do a quick video. My channel been dormant awhile. Got bad health couple yrs back. INCOMING!. God Bless!
@@FarmPrepper1 Look forward to seeing it.
Lol, that 1st gear giggle was all you had to say!!
Now install target tune with the wideband O2 sensors and fire up autotune, that 96” is gonna surprise you. For now you can run basic autotune and still see a few extra HP improvement. But be careful man, it’s a crazy deep rabbit hole that will keep you smiling. 👍
I'm about to get the power vision this weekend on my cvo thanks
Good to hear man, your gonna love it!
Thank you. I’m on that!
I was referring to the firmware & map listing. I bought mine from dyno jet
Ok, yes it should be pretty close. If it doesn’t have your exact upgrades listed just pick the closest ones and go for it.
Sounds good. Real nice smooth pull.
Nicely done video. But it was very weird watching it. I also have a 2011 Sedona Orange Wide Glide. One of the seats that I have is a black Mustang day tripper and I also have the Dynojet power vision. I used the Kuryakyn 1.25 handlebars mount For the power vision screen.. The screw holes on back of the power vision lineup perfect With the plate that comes with the kit. I also used to have the big sucker but when I build my engine I damaged it so I switched it out for the Harley Davidson heavy breather. From time to time the Engine idle becomes a little Erratic. if you have this problem simply reset the learn Fuel trim.
Thanks for the comment. I just used a combination of my ram mount and the supplied mount that came with the power vision. Only downside so far to having the 1.5" bar diameter. May have to look into the kuryakyn to see if they have the one for me, thanks for the heads up.
@@texasharleyrider7424 No problem happy riding.
You made my mind up thanks
Right on man!
I know this video is a few years old but I have to know, what gauge is that? Where can I get it? I have a 2011 wide glide with factory gauge and I need yours
It is a Harley speedo/tach combo. Can order it online or at your local dealership. Here is a link to check it out. Ride safe 🤙
www.harley-davidson.com/us/en/shop/combination-digital-speedometer-analog-tachometer/p/70900274
Will the tuner make any difference if I’m running all stock other than some slip-ons??
I would think so, how much would be debatable. I’m sure the slip ons are less restrictive than the stock exhaust so changing the tune would likely get some noticeable results. If your on the fence, give fuelmoto a call and they would be able to tell you what to expect. If you purchase from them, they will send it with a tune loaded to your bike specs.
This video rules!😄
Lol....like you laughing when on the throttle...lol...would same work on my 2007 TC96 with stage 1?
Best I can tell you is to contact Fuel Moto. If you get the power vision from them, they will install a custom tune to your bikes specs. Will definitely wake it up. Thanks for the comment!
Do u have to purchase 02 sensors
@@markdurham252 No. The only time you need to upgrade the O2 sensors is when you add the target tune system. It uses the wide band sensors.
Thanks just got one!
I have a 2011 FXDWG as well and I'm wondering is that a stock speedometer on there? Mine is nothing like that
Sorry for the late reply, several on here that I never got a notification for. It’s not stock, it’s the aftermarket from Harley. Color adjustment and a gear indicator as well.
When i update my powervision will it give me a map thats close to what i have for my setup? I have a basic stage 1 upgrade on my bike. I have a 2009 ultra classic, 96ci, stage 1 air cleaner. 4" cobra neighbor hater slip ons
By update do you you mean software or map for the bike? I bought mine from fuel moto and they made a tune for the exact setup on the bike. If this is the first time setting it up on the bike, and you didn’t get a tune pre programmed with your specs, you can just download one of the listed tunes for your bike closest to your setup. After you’ve done that you can always run an auto tune to better fit your application if needed. Hope this helps.
Have you addressed the decel pop? Fuel Moto has instructions on their web site to tune it out.
Initially I was going to, but decided to run it a while first. Its actually not too bad now, maybe I'm just used to it. When I get time, I plan to run some auto tune sessions and see how it works out.
Texas Harley Rider Awesome. I subscribed to tour channel. Great video.
Oh Sunny Biscuit 😂
Great video!!!...Do you think this bike would be good for a person who is 5'5"? Would they be able to reach the forward controls with no problems? Thanks
Thanks! As far as the bike fitting a person your height, I can’t answer that. I will say a friend of mine is 5’ 9” and he sat comfortably but legs were almost straight. I would have my doubts but also depends on your inseam. Best advice is to find one at a dealership to sit on or find someone around town. Would be awkward but once explaining your situation I’m sure they would let you throw a leg over. You can buy a reach seat that will push your position forward or even put a set of mid controls on and one or both together would get you where you need to be. Good luck and ride safe 🤘
@@texasharleyrider7424 thanks for the info! I will definitely consider the two modifications you mentioned if i end up getting one and i need to make it a better fit for myself, i love that bike!
I am looking at getting the power vision to replace my fp3 but don't want to mount anything to my bike after tuning u can disconnect it from your bike?
Yes you can.
That is exactly what the creator of this video did. Just flash the preprogrammed map to the ECU, unplug the Power Vision tuner, and go ride.You may want to leave it installed for a few riding sessions though in order for the autotune feature to sharpen the newly installed map and tailor it to your riding conditions. Then you can remove it and your new map stays programmed in the ECU or you can leave it permanently mounted in full view and use it as an engine instrument display panel.
What kind of performance did you get by going to power vison ??
I never had any actual numbers to go by, only feel. There was a slight improvement in throttle response, torque did seem to improve as well as mileage. Maybe 3-6 mpg. I’m actually selling the bike tomorrow and so I put the fp3 back on since I can use the PV on another bike. Definitely noticed that it didn’t “feel” quite the same.
@@texasharleyrider7424 thank you so much for the info !!! Looking forward to yr next video 1👍🏆
I like that speedometer, is that stock for that year
No, it’s the aftermarket from Harley. Tons of color adjustments if you want to change it up and also has the gear indicator.
Nice, it's it plug and play
@@miguelsalgado4673 Yep, nothing to it. You’ll spend more time setting up your clock and colors.
Did you tell your wife it cost $50? LOL
Easier to ask forgiveness than permission lol.
I actually got it on a promo for 10% off at the time.
Might check your mic position, breathing noise is noticeable.