Samsung FE error Fix
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2024
- Samsung FE error fix. Step by step instructions on how to repair Samsung FE error. Most common in Samsung Washer Dryer washing machines. This video goes into how to repair Samsung FE Fault code. Once you identify and fix the faulty part the FE error code will reset.
- แนวปฏิบัติและการใช้ชีวิต
Thank You Brow.
Hi sir. My Samsung dryer is showing FE but the fan usually will spin for close to 30s. What could be the cause? Am in Cameroon and a technician
Hi I’ve had this error code today. Took all all apart and the fan area was loaded with what looked like mountains of soap powder and wet fabric fibres. The fan was seized. I cleaned it all up and got the fan free but it sounds horrible now really loud and spins flat out. The blade lock nut was completely rusted. I’ve come to the conclusion that the fan motor internal bearings have worn out. When buying a new motor does it come with the reverse thread lock nut? Or do you know where to get one from?
hi i think a new fan should come with the nut otherwise you can go match it up at your local hardware shop
Am going to check mine to see if it is clogged up. Not a newbie to appliance repair, but first time dealing with fancy samsung units. They were here when we purchased our home.
Hi, and thanks for this video. Just recieved an FE code as well, but on my stand alone samsung dryer, not a combination unit. Qould you know if the fan in the same spot on just a dryer? Thanks in advance!
Hi welcome. On the dryer it is usually attached to the motor so its in a different spot. You will need to remove to cover and right hand side cover to access the fan
I HAVE A SAMSUNG WASHER WITH THE FE CODE BUT DO NOT SEE A DRYER
I have the FE code on my Washer
Is same fix applied?
If it has a fan yes
Hello, thank you in advance. I have a Samsung Dryer and it doesn't power back on for a long time after a drying cycle and I think I got an FE code after the last drying cycle.
Is your fam making a noise during the cycle ? You also need to clean the dryer up if it’s a heat pump one th-cam.com/video/kyk4i-4_Hfs/w-d-xo.html
GET TO THE FARGING POINT!!!
If your fan is running, check for blockage in the plastic container the fan sits on. Enter from the back and undo black hose clamp and check from bottom
Clean my fan fan runs free still getting fe error after 5 min running what else can it be
Might be rubbed through wiring to the fan
@askmrwashywashy found the issue after try every thing, the box the fan sits on was blocked at the bottom taken of clamp on rubber, and unblocked was restricting air flow.
These things look like a fire hazard waiting to happen.
@@CymruDrone wow glad you were able to fix it. Oh yeah fire hazard indeed