Here's my battery pack solution for Atomos Ninja V: 1. Anker PowerCore Essential 20000 PD (i.e. Amazon UK) ~46.00 Euro. 2. USB-C to USB-C PD Cable - any good quality will do. Get a short one. 3. PD Spoof Adapter Plug Converter USB Type C Female to 5.5* 2.5mm (AliExpress. Item code: 5525 ) - under $5.00. It's angled too which makes it easier for me to manage the cable behind the monitor. 4. Reuse the power supply connection battery adapter that came with the Ninja V monitor to link all together. Total: under 60.00Euro with 20k juice. On Atomos Ninja it will show up as a 9V power (bank) delivery. Some of the NPF batteries deliver 7.4Volts. Remember the input Voltage allowed is 6.2V - 16.8V. As you can see you will be far from exceeding or under-volting the Atomos Ninja V with this neat setup. It works for me. Thank me later.
I think you might have the same power bank as mine. You might be overdrawing too much of that power bank, or not! I would double check max. power consumption--that is noted as W. A x V=W (amps x voltage = watts). Max W out of those USB ports is 15W on mine. The Ninja needs about 30W. That is double the amount of power needed. Double check and make sure that is not the case. Cheers!
This is super helpful thank you! I've been struggling to find a good solution for powering my ninja besides a V-lock bat which would be a tad overkill for my kit
Great idea, but if you check the specifications of the RavPower Portable Charger 20000mAh 60W PD 3.0 USB C Power Bank, no where does it list the 'Voltage' it lists input voltage and output - in case of Ninja V 12V_3A But a lot of these power banks are 3.7V batteries stacked inside, so they are by and by a marketing ploy... aside from that issue I am curious to whether you or anyone else knows the run time of using said battery with cable on the Ninja V 100% brightness recording non stop 400Mbps 422 10bit?
@@therealjimmy5411 there is a way to power both with PB but u must use Anker Powercore A1275 and a type C to DC 2.5 ( bought from aliexpress model number : 5525 ). A to C go to ur body and Type C wth DC adapter will go to your ninja V
I discovered your channel recently.... Than i dig in and check your video.... And let me tell you that your work is superb man..... Love this kinda video...... Love yor one lens series..... Keep inspiring..... Love from India 🇮🇳
Ohhh Chris, that cable for charging the Ninja V via USB C is exactly, what I was searching for!! Thank you very much for sharing :) Until now I used a big battery pack for the Ninja and I want to get the weight down :)
oh this is so great! thanks a lot for sharing!!! can you put the link of your power bank? can your power bank power both the ninja 5 and my GH5 (with 2 different power pipes)?
LOVE these kinds of video hacks. Great quality on the vid as well. Just to confirm the PowerPipe plug on the back of the atomos IS the right barrel size, but does NOT have the securing threaded component, right? It'll fit, but 'can' be yanked out by accident?
Looks like this was a one or the other solution. How about a way to power a camera (with dummy battery) and a Ninja by way of a external power delivery power bank (non dtap type).
Hello. Thanks for the video. Can you please let us know: 1) Can I connect both A7iii and the Ninja to the power bank? 2) I set the resolution to 4K 30p and press REC on one of them. For how long will it go until the power bank dies?
I was also looking to do that same. Until now I have used a v-lock battery to power the Ninja V. I can't yet find a power bank with two PD outputs which is a shame as something as compact as that would be great. So still doing my homework before I buy these cables.
there is a way to power both with PB but u must use Anker Powercore A1275 and a type C to DC 2.5 ( bought from aliexpress model number : 5525 ). A to C go to ur body and Type C wth DC adapter will go to your ninja V
I use a hamster on a wheel to power my monitor. I doesn't work very often, but when it does I have peace of mind knowing that whiskers is getting his exercise.
Thanks for this really helpful video Chris! So helpful! Is it possible to power a Sony A7siii and external monitor at the same time with a USB power bank? Or would there be issues with power supply etc Thanks :)
Hey thanks for the video. I wanted to know what did you put in the ninja v as a adapter for the dummy battery in back? You showed it in the video. I’m looking for it on Amazon. Really appreciate it
Unfortunately the Ninja V hasn't worked with the 2 power banks I tested it with. I tried different cables as well so I assume the issue is compatibility with the power banks.
Hi! Did you try to power up both (camera and recorder) with a single power bank PD? What about hot swapping power banks? I want to power up canon r5 (15W) and ninja V+ (22W) with 2 power banks that can handle 37 W each, for long recordings!!! I want to create a Y cable for 2 powerbanks (in the same time) and one end that deliver power to the rig (here with another split, one for dummy and one for ninja). If any power Bank have at least 37W I can record without stop, just replace from time to time the power banks.
Hi Chris. Which dummy battery would you recommend for the A7siii? I'd love to have that power pipe setup for the A7siii with a PD powerbank. But I'm worried about the warnings that they say pop up when using 3rd party NP-FZ100 batteries on the A7siii. It might show too with generic NP-FZ100 dummy batteries?
Hi Chris, was not able to get my Niji 5 to power up with the blind spot power pipe. I bought a Anker 525 20000 PD and still did not work. When I plug it into a wall outlet the Niji 5 works perfect. Do you have any solution for me? Thanks
awesome! I've been looking all over internet for a DC to USB-C cable for an Atomos monitor, and I couldn't find it. I decided to give YOutube a try, and magic!! Thanks!! But have you actually tested it? A review on BH photo says it doesn't work with PD power banks, only when plugged to a wall adapter. I will try other brands from Aliexpress. But there are 5.5mmx2.5mm and 5.5mmx2.1mm. Which one should I get for Atomos monitors like the Shinobi 7? Thx
Hi chris, how long does a small npf550 last on your ninja v? I use 970s on mine but it’s honestly so heavy and bulky. I charge after each shoot so it’s no problem. I want to get some 550s or 750 but curious how much time it would give me on the ninja.
Could i perhaps use this powerbank connected to a charger so i charge my spare a7iii batteries while im filming? Would they charge in time? And would you actually suggest doing that?
I used to do this all the time at weddings when I only had a few batteries. As soon as one battery is dead, plug it in to the portable charger and it’s charged within 1.5 hours, often less
Thanks Chris! Just researching power cables for my camera and monitor for portable setups and this should work since all I have is a powerbank and not VMount. Btw, is it possible to record directly into a Samsung T5 SSD from Sony A73? Thanks for responding.
Dear i have recently purchased FX 30 and im sick of buying batteries coz they r very costly. Pls guide me I have shortlisted MI power bank 20 000 MAH which deliver 9V/2A. Is this compatible I only want to power and record lon videos. Is using PD Power Bank advisable or it harms camera anyway.? Thanks in advance Waiting for your reply.
Just curious to know how you feel about new videographers and getting a Ninja V. Is it worth it to get one if you are only 5 months into learning videography??? Or is it even worth having one? I am tempted to buy one for myself.. But not sure.. What do you guy's think?
@@chrisbrockhurst Advertisement video's for a few business' in my community, and for my own fun video's for myself. As well as for a wedding I will be filming in 2021!
Does it stops charging in between while recording? because I tried charging with the power bank while recording on my a7iii and camera's battery was actually draining as usual (Not at a quick pace, but the same as the usual pace without connecting a power bank.) I'M NOT USING ANY ADDITIONAL DUMMY BATTERIES WITH THE POWER BANK. Please let me know how to fix it, Thanks.
Hi Chris, I just got my Atomos Ninja V (I don't know if you read comments from your older videos so I'm posting this again). Do I need to set my dial to movie mode in order to record properly onto the Atomos? Normally I hit record from the custom dial 1 & 2 to switch between 24 and 120fps prior to getting the Atomos, but I noticed that the Atomos recorded in a 4:3 ratio instead of the 16:9. Super confused... Is this because the custom dials are normally used for photography? Also, if I want to shoot past the record limit on the A7III, do I need to set the camera so that it won't go into any sort of energy saver mode?
hi chris, this may be a stupid question but what size (idk if that’s right… i just really need help) DC barrel is used with the Atomos Battery Eliminator? I’m probably missing something but i’m trying to get power out of a d-tap cine battery (Anton Bauer Titon 150) and could use some guidance
Thanks for the video Chris. I bought the DC>USBC power pipe to use a battery bank. I did notice that when using the DC adapter to the power pipe to a 20K MAH battery bank that the ninja V+ screen goes black. It is still backlit and powered, but nothing showing on the monitor itself. It does not do this with the actual battery. Also, tip, the ninja requires primary power, so if you plug in say a Rode VMP+ to an extra USB port on the power bank, it will kill the ninja at least with the two banks I purchased. This is all on a R5 though. Have you ever experienced this with your camera? Was there a solution that you found? Thanks for reading and hopefully responding. Keep creating and thank you for your time.
Hi there! Did you test the ninja v in deep with that 5V 2A or max 3.4A RAVPower? Because the Atomos CS says there is no way that the ninja v can work proper, screen and record with only 5V. But if your experience is different that would be nice and i buy immediately the cable 😀
OK hi guys, I have been looking for a field monitor for my iPhone rig, which I plan on using 85% of the time outdoors and this is the first monitor I have comes across that has a power source I have been looking for, a monitor that can use a portable power bank. Awesome However I am not making any profit from my shoots, is for my personal use only with that the price is overkill at over 1,000.00$ for an Atomos Ninja V can anyone suggest an alternative field monitor that can do this for me?
I tried to power my Ninja V with different power banks, but they won’t work. Is it because the Ninja V needs at least 6.2 V input or more? What voltage is the Ravpower bank you have?
@@chrisbrockhurst what’s more important, and seemingly harder to find, are power banks that not only output 12V via PD, but 12V / 3A. Most of the compact ones that interest me are 12V / 1.5A.
@@danhopkins2955 I did some research as well and this one seems to have the right specs: "RAVPower Type-C 20000mAh 60W PD Powerbank " Unfortunately only one PD out. 2 would be perfect in order to power GH5 + Ninja.
Just ordered this cable for use with my Ninja V... andddddd it doesn't work. No power from the USB C in my Anker PD powerbank, Ninja just doesnt turn on. Dissapointing, I imagine these are just low quality cables with a premium because of the application
Here's my battery pack solution for Atomos Ninja V:
1. Anker PowerCore Essential 20000 PD (i.e. Amazon UK) ~46.00 Euro.
2. USB-C to USB-C PD Cable - any good quality will do. Get a short one.
3. PD Spoof Adapter Plug Converter USB Type C Female to 5.5* 2.5mm (AliExpress. Item code: 5525 ) - under $5.00.
It's angled too which makes it easier for me to manage the cable behind the monitor.
4. Reuse the power supply connection battery adapter that came with the Ninja V monitor to link all together.
Total: under 60.00Euro with 20k juice.
On Atomos Ninja it will show up as a 9V power (bank) delivery. Some of the NPF batteries deliver 7.4Volts. Remember the input Voltage allowed is 6.2V - 16.8V. As you can see you will be far from exceeding or under-volting the Atomos Ninja V with this neat setup.
It works for me.
Thank me later.
hi, are you still using that setup to power your ninja V ? am trying to find a solution since my NPF battery is broken
I think you might have the same power bank as mine. You might be overdrawing too much of that power bank, or not! I would double check max. power consumption--that is noted as W. A x V=W (amps x voltage = watts). Max W out of those USB ports is 15W on mine. The Ninja needs about 30W. That is double the amount of power needed. Double check and make sure that is not the case. Cheers!
Ninja V powered from a portable charger? YES PLZ
This is super helpful thank you!
I've been struggling to find a good solution for powering my ninja besides a V-lock bat which would be a tad overkill for my kit
See my comment above. Great way to power both at once (using a dummy battery and plugging it into the same battery that is powering the Ninja)
Great idea, but if you check the specifications of the RavPower Portable Charger 20000mAh 60W PD 3.0 USB C Power Bank, no where does it list the 'Voltage' it lists input voltage and output - in case of Ninja V 12V_3A But a lot of these power banks are 3.7V batteries stacked inside, so they are by and by a marketing ploy... aside from that issue I am curious to whether you or anyone else knows the run time of using said battery with cable on the Ninja V 100% brightness recording non stop 400Mbps 422 10bit?
Thanks for this video Chris, I am now doing my homework as to powering both the Sony A7S3 and Ninja V or Shinobi as compact as possible.
Did you find a way to power both at the same time with a portable power bank?
@@therealjimmy5411 I have not at this time but did not look into it much, so it might be possible.
@@therealjimmy5411 there is a way to power both with PB but u must use Anker Powercore A1275 and a type C to DC 2.5 ( bought from aliexpress model number : 5525 ). A to C go to ur body and Type C wth DC adapter will go to your ninja V
Honestly looks like a battery pack that out out 50w at a time dual type c should power up camera and monitor! Lol
I can’t find anything that has two outputs that give enough power. One USB port has all the power and the second isn’t enough for the other.
There have been reports from people that the cable does NOT work with all PD USB powerbanks and there's no list anywhere of which ones are compatible.
I discovered your channel recently....
Than i dig in and check your video....
And let me tell you that your work is superb man.....
Love this kinda video......
Love yor one lens series.....
Keep inspiring.....
Love from India 🇮🇳
Thankyou!! Really appreciate that
Ohhh Chris, that cable for charging the Ninja V via USB C is exactly, what I was searching for!!
Thank you very much for sharing :)
Until now I used a big battery pack for the Ninja and I want to get the weight down :)
Thanks for this. I've been looking for alternative ways of powering my Ninja V and Atem Mini Pro. SUPER 🆒
I only have one issue with this, you didn't plug in both the camera and the monitor at the same time
Tun time charging the camera and powerring the Ninja V, monitoricé and recording please?
oh this is so great! thanks a lot for sharing!!! can you put the link of your power bank? can your power bank power both the ninja 5 and my GH5 (with 2 different power pipes)?
LOVE these kinds of video hacks. Great quality on the vid as well. Just to confirm the PowerPipe plug on the back of the atomos IS the right barrel size, but does NOT have the securing threaded component, right? It'll fit, but 'can' be yanked out by accident?
I just received blind spot power pipe for Ninja V to power from ANKER Power core plus 26800... It is fully charged. I can not power up the Ninja V.
Looks like this was a one or the other solution. How about a way to power a camera (with dummy battery) and a Ninja by way of a external power delivery power bank (non dtap type).
Hello. Thanks for the video. Can you please let us know: 1) Can I connect both A7iii and the Ninja to the power bank? 2) I set the resolution to 4K 30p and press REC on one of them. For how long will it go until the power bank dies?
I was also looking to do that same. Until now I have used a v-lock battery to power the Ninja V. I can't yet find a power bank with two PD outputs which is a shame as something as compact as that would be great. So still doing my homework before I buy these cables.
there is a way to power both with PB but u must use Anker Powercore A1275 and a type C to DC 2.5 ( bought from aliexpress model number : 5525 ). A to C go to ur body and Type C wth DC adapter will go to your ninja V
I use a hamster on a wheel to power my monitor. I doesn't work very often, but when it does I have peace of mind knowing that whiskers is getting his exercise.
Cools cables. Thanks.
Super useful. Wish the batter pack had two USB C ports. Any way to use a cable that can split it? One for cam, and the other for the Ninja?
Link to that power bank 🙏🙏🙏🙏🙏
How long does the Atomos battery life last on that power bank?
Just wonder can you power up both,ninjaV and a7iii,at the same time with power bank?
If you can find a power bank with PD and another port for your camera you definitely
Could!!
@@chrisbrockhursthelp please i cant find a power bank with 2 power delivery ports
Thanks a lot, nobody talks about it
Thanks for this really helpful video Chris! So helpful! Is it possible to power a Sony A7siii and external monitor at the same time with a USB power bank? Or would there be issues with power supply etc Thanks :)
Just wondering how many times you used the word 'power' there 😅 well it was a powerful video tho.
Not enough 😂
Hey thanks for the video. I wanted to know what did you put in the ninja v as a adapter for the dummy battery in back? You showed it in the video. I’m looking for it on Amazon. Really appreciate it
Unfortunately the Ninja V hasn't worked with the 2 power banks I tested it with. I tried different cables as well so I assume the issue is compatibility with the power banks.
Hi! Did you try to power up both (camera and recorder) with a single power bank PD? What about hot swapping power banks? I want to power up canon r5 (15W) and ninja V+ (22W) with 2 power banks that can handle 37 W each, for long recordings!!! I want to create a Y cable for 2 powerbanks (in the same time) and one end that deliver power to the rig (here with another split, one for dummy and one for ninja). If any power Bank have at least 37W I can record without stop, just replace from time to time the power banks.
i found one from aliexpress for my ninja V that has the locking mechanism
Hi Chris. Which dummy battery would you recommend for the A7siii? I'd love to have that power pipe setup for the A7siii with a PD powerbank. But I'm worried about the warnings that they say pop up when using 3rd party NP-FZ100 batteries on the A7siii. It might show too with generic NP-FZ100 dummy batteries?
Strange you don't have a link to the battery anywhere
Hi Chris, was not able to get my Niji 5 to power up with the blind spot power pipe. I bought a Anker 525 20000 PD and still did not work. When I plug it into a wall outlet the Niji 5 works perfect. Do you have any solution for me? Thanks
Solid video!
awesome! I've been looking all over internet for a DC to USB-C cable for an Atomos monitor, and I couldn't find it. I decided to give YOutube a try, and magic!! Thanks!! But have you actually tested it? A review on BH photo says it doesn't work with PD power banks, only when plugged to a wall adapter. I will try other brands from Aliexpress. But there are 5.5mmx2.5mm and 5.5mmx2.1mm. Which one should I get for Atomos monitors like the Shinobi 7? Thx
I can’t seem to find the usb-c to 12v DC power pipe online. Any ideas where I can currently get one? And a link to that exact powerbank? 🙏🏼
Instead of using the v-mount battery to the Dummy battery, can it be plugged directly to the a73/a74/a7s3/fx3 via usb-c? I'm curious....
Forgive me if I’m being an idiot but what’s the name of the powebank you used here please? Thank you 🙏🏾
Hi chris, how long does a small npf550 last on your ninja v? I use 970s on mine but it’s honestly so heavy and bulky. I charge after each shoot so it’s no problem. I want to get some 550s or 750 but curious how much time it would give me on the ninja.
Could i perhaps use this powerbank connected to a charger so i charge my spare a7iii batteries while im filming? Would they charge in time? And would you actually suggest doing that?
I used to do this all the time at weddings when I only had a few batteries. As soon as one battery is dead, plug it in to the portable charger and it’s charged within 1.5 hours, often less
How much did you payed to fixed your a7iii Microphone jack
Still broken
Cool video. Can one powerbank power the ninja and the sony at the same time?
it would be possible with the right power bank
@@chrisbrockhurst thank you!!!
Thanks Chris! Just researching power cables for my camera and monitor for portable setups and this should work since all I have is a powerbank and not VMount. Btw, is it possible to record directly into a Samsung T5 SSD from Sony A73? Thanks for responding.
Not possible to record directly as far as I’m aware
@@chrisbrockhurst Thanks mate
Dear i have recently purchased FX 30 and im sick of buying batteries coz they r very costly.
Pls guide me
I have shortlisted MI power bank 20 000 MAH which deliver 9V/2A.
Is this compatible
I only want to power and record lon videos.
Is using PD Power Bank advisable or it harms camera anyway.?
Thanks in advance
Waiting for your reply.
I watched your video and ordered one for my NinjaV, do I need to any other adapters to use it? Thanks
I didn't catch that . . . .was this a video about power? (heh heh)
Don’t know how you thought that 😂
Brilliant!
Just curious to know how you feel about new videographers and getting a Ninja V. Is it worth it to get one if you are only 5 months into learning videography??? Or is it even worth having one? I am tempted to buy one for myself.. But not sure.. What do you guy's think?
Gotta ask yourself what you are buying it for?
@@chrisbrockhurst Advertisement video's for a few business' in my community, and for my own fun video's for myself. As well as for a wedding I will be filming in 2021!
Probably not necessary to be honest. Maybe look at the monitor instead
@@chrisbrockhurst Thank you :) I will do that!
Does it stops charging in between while recording? because I tried charging with the power bank while recording on my a7iii and camera's battery was actually draining as usual (Not at a quick pace, but the same as the usual pace without connecting a power bank.)
I'M NOT USING ANY ADDITIONAL DUMMY BATTERIES WITH THE POWER BANK. Please let me know how to fix it, Thanks.
Hi Chris, I just got my Atomos Ninja V (I don't know if you read comments from your older videos so I'm posting this again). Do I need to set my dial to movie mode in order to record properly onto the Atomos? Normally I hit record from the custom dial 1 & 2 to switch between 24 and 120fps prior to getting the Atomos, but I noticed that the Atomos recorded in a 4:3 ratio instead of the 16:9. Super confused... Is this because the custom dials are normally used for photography? Also, if I want to shoot past the record limit on the A7III, do I need to set the camera so that it won't go into any sort of energy saver mode?
Yeh the ninja v will require some setup. I suggest Gerald Undones video on it.
Chris Brockhurst I already watched Gerald Undone's videos but nobody has mentioned anything about dials. Do you just set yours on "movie"?
hi chris, this may be a stupid question but what size (idk if that’s right… i just really need help) DC barrel is used with the Atomos Battery Eliminator? I’m probably missing something but i’m trying to get power out of a d-tap cine battery (Anton Bauer Titon 150) and could use some guidance
WHAT IS THE NAME OF THE POWER BANK???
hi Chris, Thanks for the great video!! may i know which actual model of Power Bank you tested & used on Ninja V? Thanks
RavPower with PD
Hi Chris, Thanks for your reply, is this the model you used ? RavPower RP-PB201 20000mAh Powerbank Thank you
just to be on the safe side... because lots of the power bank will not be compatible with this cable.. Thank you very much on your kind sharing..!!
exactly my friend
Thanks for the video Chris. I bought the DC>USBC power pipe to use a battery bank. I did notice that when using the DC adapter to the power pipe to a 20K MAH battery bank that the ninja V+ screen goes black. It is still backlit and powered, but nothing showing on the monitor itself. It does not do this with the actual battery. Also, tip, the ninja requires primary power, so if you plug in say a Rode VMP+ to an extra USB port on the power bank, it will kill the ninja at least with the two banks I purchased. This is all on a R5 though. Have you ever experienced this with your camera? Was there a solution that you found? Thanks for reading and hopefully responding. Keep creating and thank you for your time.
Hey man so connecting to a 20k MAH portable battery doesn’t work?
@@BoyBlessing I had to hold the power button down SIGNIFICANTLY longer than I do with the stock battery. It turns on 70% of the time🤣
Hi there! Did you test the ninja v in deep with that 5V 2A or max 3.4A RAVPower? Because the Atomos CS says there is no way that the ninja v can work proper, screen and record with only 5V.
But if your experience is different that would be nice and i buy immediately the cable 😀
if there's communication over USB-C, USB-C can deliver more voltage then 5v
Can u recommend a dummy battery you use?
anything well reviewed will work well.
Is it an issue if it’s not a secured barrel plug on the ninja V? What if it comes undone?
It’s pretty snug. Don’t think it will just fall out. If your really worried could throw some gaff tape on there to be safe
OK hi guys, I have been looking for a field monitor for my iPhone rig, which I plan on using 85% of the time outdoors and this is the first monitor I have comes across that has a power source I have been looking for, a monitor that can use a portable power bank. Awesome
However I am not making any profit from my shoots, is for my personal use only with that the price is overkill at over 1,000.00$ for an Atomos Ninja V
can anyone suggest an alternative field monitor that can do this for me?
I tried to power my Ninja V with different power banks, but they won’t work. Is it because the Ninja V needs at least 6.2 V input or more? What voltage is the Ravpower bank you have?
it does up to 20v/3amps, look for a Power Delivery power bank, thats what you need.
@@chrisbrockhurst what’s more important, and seemingly harder to find, are power banks that not only output 12V via PD, but 12V / 3A. Most of the compact ones that interest me are 12V / 1.5A.
@@danhopkins2955 I did some research as well and this one seems to have the right specs: "RAVPower Type-C 20000mAh 60W PD Powerbank "
Unfortunately only one PD out. 2 would be perfect in order to power GH5 + Ninja.
Which dummy battery do you use?
I actually don’t know the brand, it’s just off amazon. Any that is well reviewed with work
Just ordered this cable for use with my Ninja V... andddddd it doesn't work. No power from the USB C in my Anker PD powerbank, Ninja just doesnt turn on. Dissapointing, I imagine these are just low quality cables with a premium because of the application
I had the same problem with this cable using Anker Powercore plus 26,800MAh. no power from Blind Spot.
First!
👋
Pls pls pls help sir
Who wears a hat AND a hoody indoors?
Me.