2022+ Chevy Silverado ZR2 - Upfitter Aux Switch Install
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- In this video - I show how to install the Aux switch on your 2022.5+ Chevy Silverado ZR2.
These instructions will be the same for the 1500 and the 2500 - but the 1500 has 3 additional pins that need to be ran. The 2500 should have these pins already installed. Also note - the 2500 will have the switches - but the firewall power line, and the auxillary fuse box will not be installed. They are simple to run through the firewall and back behind the hvac box.
For more details on the wiring - please check out 8ball_99 install on the ZR2 page: www.chevyzr2.c...
Tools/Parts Used:
2022+ Aux Switch: amzn.to/3shuPYh
2022+ Auxiliary Fuse Box: 84645397
2022+ Battery Cable: amzn.to/40nnhzC
2022+ Trim Surround: 87863270
Terminated Pin + Wire: 13578907
Pins: 7114415202
Plastic Tool Removal Kit: amzn.to/3sjrCHx
7MM Screws: amzn.to/3tYKSuu
Milwaukee M18 Battery: amzn.to/3il6loT
Milwaukee Charger:amzn.to/2YcteUx
Craftsman Hex Socket Set: amzn.to/3vvhJVU
Craftsman Extended 1/2 ratchet: amzn.to/3opxr1q
Craftsman Ratcheting 12MM Wrench: amzn.to/3EuTMQE
Craftsman Socket Set: amzn.to/3z315NP
Milwaukee Charger: amzn.to/3keJTP7
Milwaukee 3/8 Ratchet: amzn.to/3wt7G2O
Thanks everyone for all of your support!
Help support the channel by checking out the store:
www.bonecrrushe...
Send me stuff!
Craig BonecrrusherSS
PO BOX 63
Denver, NC 28037
The Tools I Use: www.amazon.com...
Follow me on Instagram: / bonecrrusherss
Follow me on Twitter: / bonecrrusherss
Like me on Facebook: / bonecrrusherss
This post/video contains affiliate links. As an Amazon Associate, I may receive commission from qualifying purchases made through my links.
Quick update - if you want a Plug n Play adapter to get the switches to light up correctly @404parts sells a harness. That install is below:
th-cam.com/video/753msjm4bUk/w-d-xo.html
Good video, glad someone made one! Ive gotten a lot of questions on how to do this. Thanks for the shout out!
No problem! Without what you had shared with me on the FB groups - I wouldn't been able to do this!
Thanks again!
Yet another amazingly informative video! Thank you for bringing 8ball's post to life. I have no problem tearing an engine down to the block and rebuilding it, but electrical scares the heck out of me. You have brought me a bit closer to having the courage to attempt this. Thank you, thank you, thank you!
DS 1480 - there is a "plug and play" solution for the wiring for those missing pins. I am going to wrap up that video this weekend - and post it next week.
Now I say plug and play - I had to extend the harness that I bought by 3 feet! Sucks cutting up a new harness - but the truck is almost done and back together.
Looking forward to that update.@@bonecrrusherSS
Thanks for the awesome video. I have the same issue on my 2024 TrailBoss that is preventing the switch led lights from illuminating when pressed. Your video helped me see there is a fix with the 3 wires. But question... wouldn't it be easier to just put a t-tap on the 3 wires that need a 12v source and run that to a fuse instead of putting pins in the truck side of the connector?
I bought an adapter harness from 404 Parts - this way I didn't have to cut anything else up on the truck.
th-cam.com/video/753msjm4bUk/w-d-xo.html
Great video!
Can you make another informative video about going through the firewall please?
So I ran the wire through this access point - I had previously used it in my Subwoofer install video. I gave more details here:
th-cam.com/video/OP7eM371ZCc/w-d-xo.html
Cool video need to sell complete package. Thanks
I think a few vendors are putting together kits.
Can you post the part numbers on here
They are in the video description.