4:54 you can also hold down the mouse button and it will give you a drop-down menu with all construction lines, constrains, faces or whatever is overlapping at this point. For anyone who didnt know. its quite handy and saves you the effort of moving around dimensions or finding a different angle to look at
Great video! I usually design practical parts or parts for 3D printers. I was struggling to find a way to create a planter with a more complicated design. Thanks for sharing!
Great tutorial - Do you know why I can change the dimension parameters through the modify/change parameters drop down, but can't just adjust the dimensions from the sketch like you did around 10minutes?
Thank you for explaining how to make these geometric designs. I was thinking about the concentric polygon and loft, but those only connect singular points and not multiple (afaik). I like your joyful explaining 😀
@@KristianLaholm I was wondering something. I try to make designs that are easily changed. I set 2 parameters, the circle diameter and the number of segments in the polygon. For some reason, when I change these parameters, sometimes F360 throws a tantrum, mostly when I make the number of segments higher than my initial designm(it will show gapes when I go lower). I would think, that the extra segments (patches) you make are tied to the base shape. If I change the parameter, it fails, or should I scroll back in the timeline to do this? Probably I need to look for a mathmatical explanation in the shape (hope this makes sense in a way). (hobby project by the way)
@@MrLexhoya There is a problem if you change the number of bodies in a model with pattern. Fusion gives the bodies new names and features like Combine get confused as they are based the name of bodies. The same goes for like Extrude Cut if you add bodies in the extrude path they will not be cut. Some of this things can be a bit annoying then trying to make everything parametric.
My guess is that there is some other constrain to the line that makes it fly away. The other thing is of you have been playing around in Fusion for some time it's good practice to restart the software.
@@KristianLaholm The ones in Fusion when you Create Form. Seems like that environment one has a lot of control over forms that look a lot like what you made here., which is really good. Just wondering if you knew about that environment and the pros/cons of working with Forms/Mesh vs. the BReps.
Thank you Kristian for another great video, I enjoy the pace and the fact that you challenge us to learn new things and ways of approaching designs.
4:54 you can also hold down the mouse button and it will give you a drop-down menu with all construction lines, constrains, faces or whatever is overlapping at this point. For anyone who didnt know. its quite handy and saves you the effort of moving around dimensions or finding a different angle to look at
Sometimes the selection prioritizing in Fusion throws me a curve ball ;)
Great video! I usually design practical parts or parts for 3D printers. I was struggling to find a way to create a planter with a more complicated design. Thanks for sharing!
Thank you
Thank you! Followed along and was able to make my own. Thanks for consistently saying what keys and such you are pressing.
Thank you. I'll try and do my best in future videos but sometimes I forget saying things, if something is unclear ask a question :)
Great tutorial - Do you know why I can change the dimension parameters through the modify/change parameters drop down, but can't just adjust the dimensions from the sketch like you did around 10minutes?
It should work the same. my general tip if Fusion misbehaves is to restart the software
How do you set the thickness of the sides and the top and bottom layers?
If you want constant thickness you can use Shell like I do at 9:45
Great video, watching your channel has really improved how I construct projects in Fusion!
Thank you, and great to know my sharing help someone :)
As usual another fantastic video, thank you Kristian.
Thank you
Thank you for explaining how to make these geometric designs. I was thinking about the concentric polygon and loft, but those only connect singular points and not multiple (afaik).
I like your joyful explaining 😀
I tried using Loft but it didn't produce a stable model. The fun with 3D modeling there are always more ways to do things :)
That and it makes you try other ways of doing the same thing.
@@KristianLaholm I was wondering something. I try to make designs that are easily changed. I set 2 parameters, the circle diameter and the number of segments in the polygon. For some reason, when I change these parameters, sometimes F360 throws a tantrum, mostly when I make the number of segments higher than my initial designm(it will show gapes when I go lower). I would think, that the extra segments (patches) you make are tied to the base shape. If I change the parameter, it fails, or should I scroll back in the timeline to do this? Probably I need to look for a mathmatical explanation in the shape (hope this makes sense in a way). (hobby project by the way)
@@MrLexhoya There is a problem if you change the number of bodies in a model with pattern. Fusion gives the bodies new names and features like Combine get confused as they are based the name of bodies.
The same goes for like Extrude Cut if you add bodies in the extrude path they will not be cut. Some of this things can be a bit annoying then trying to make everything parametric.
@@KristianLaholm ah, thank you, that makes sense. Especially now I see the step before the stich; many bodies.
thanks bud!
Whenever I try to use the "equal" constraint my line disappears for some reason
My guess is that there is some other constrain to the line that makes it fly away. The other thing is of you have been playing around in Fusion for some time it's good practice to restart the software.
wow nice great video so easy to do to
Thank you
A im going fast no no really so why i ask ? There is nothing better that teach super speed fast everyone will understand cool video
Can you add curves to it to look more like vase
A curve in what direction? If you want a more narrow design you can start with a different angle.
A im going fast no no really so why i ask ? There is nothing better that teach supezr speed fast everyone will understand cool video
Thanks
thhhhhhaaaaaankkkkk yoooouuuuuuuuuuuu
Nice to know my workflows are helping someone :)
This Guy is Awsome. I need slow down his video, he speak like Eminem.
Thank you. And I', sorry I often get stuck in overdrive ;)
Couldn’t you do this much easier with mesh?
What mesh tools are you thinking of? I have used reduce mesh making low poly things but the final model is a bit random.
@@KristianLaholm The ones in Fusion when you Create Form. Seems like that environment one has a lot of control over forms that look a lot like what you made here., which is really good. Just wondering if you knew about that environment and the pros/cons of working with Forms/Mesh vs. the BReps.
good tutorial, a little slower would be better :)
Thank you :)
3:46 RADIO VOICE MOD ACTIVATED