Fusion 360 - Wave-Ribs on a Vase or Office Organizer.
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2024
- This is from a Reddit question.
NOT a beginner tutorial ;)
Links to my Printable's models:
www.printables.com/model/4525...
www.printables.com/model/4538...
0:00 Intro and Design Intent
4:00 Workflow start - วิทยาศาสตร์และเทคโนโลยี
Fascinating - thank you Kristian. Definitely earns a subscription. Looking forward to watching more of your content. 👍👍😎👍👍
Genuinely some of the best fusion tutorials on TH-cam. I've learned so much about navigating the program from these videos. Just being able to select only bodies and making selection groups and grouping large numbers of timeline events. Truly thank you for your great explanations and tips. Explaining the shortcut commands you use help so much.
very very good!!!
Great video, you do an amzing job on your tutorials, thank you!
Thank you
Really nice solution! Thanks for sharing this workflow.
Thank you
Fkn Genius! I could not do half my work without your videos!!!
Thank you
Great video, I had know idea how you where going to approach this design, You really made me think about the loft , twist, and pattern functions, I would not have done it this way because of my ignorance.
Kristian!! Your tutorials are fantastic! I learned so much with this one. I’ve been creating some lampshades and the ribbed style is the one I was looking to learn. Thank you! ❤
Thanks for the amazing feedback! It makes me really happy to know you're putting the tutorial into practice and creating something new.
Just discovered you by this awesome Video! Instantly Subscribed! Thank you for your effort!
Thank you for your support :)
Tack för intressanta och lärorika instruktionsfilmer, jag gjorde min egen version av denna och printade den, den blev jättehäftig!
Tackar :)
Great video, I learn a bunch. I will repeat this and attempt a speed run at it.
Thank you, and good luck with the speed run ;)
very good video, thank you.
Thank you
Thanks for sharing bro!
Very cool. I was thinking of making a coaster like this for CNC milling. Though it could make a cool mug also.
If you make some thing please share a picture :)
Love this video!! Do you have any general pointers for mimicking an emboss on a surface that’s curved in more than one direction?
I use an intermediate body and emboss on that. Then add that to curved body or use split face + offset face, will not work on all surfaces and there will be distorsions of the sketch you want to emboss.
Didn't know you could constrain one lines center to another line. :) I usually use dimension, the half of the vertical line to the horizontal line.
There are some useful ways of using constraints but it's a bit hard to find help/tutorials on all the small tricks.
Do you have beginner videos, to start learning how to use the program?
While I don't have a complete beginner's series available, there is a basic playlist on my channel that you can follow once you have a grasp of the fundamentals of Fusion. This playlist will guide you through some essential techniques and concepts to help you progress beyond the basics.
Watching fusion calculate may be one of most stressful thing 😂
I no longer feel the need to see scary films ;)