How to easily install the Essence 5-light integrated LED pendant

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2024

ความคิดเห็น • 48

  • @alemm00
    @alemm00 3 ปีที่แล้ว +3

    Thank you!!

  • @thelionofjudah2983
    @thelionofjudah2983 ปีที่แล้ว

    One of mine has to much slack, is their a way to tighten it without unscrewing the fixture?

    • @artikalighting
      @artikalighting  ปีที่แล้ว

      It is recommended to make any major adjustments to the height of the light fixture before installation.

    • @punjab1captain
      @punjab1captain 7 หลายเดือนก่อน

      @@artikalightingit is also recommended to actually answer the question he was asking.

  • @RottweilerTailTales
    @RottweilerTailTales ปีที่แล้ว

    Where can I buy 5000k light ship for that pendent light? I do not like soft white that it comes with.

    • @artikalighting
      @artikalighting  ปีที่แล้ว

      Hello, please note the Essence 5 only comes with 3000 K.

  • @jennbaert2701
    @jennbaert2701 2 ปีที่แล้ว

    I have one installed in my house the builder installed it i have 2 burn out how do i change

    • @artikalighting
      @artikalighting  2 ปีที่แล้ว

      hello, what are you trying to change? Please feel free to reach out to our customer care assistance.

  • @studiophilippe3501
    @studiophilippe3501 2 ปีที่แล้ว

    I have these lights and enjoy their look but one of them went out, how can I replace one of them? Please help!

    • @artikalighting
      @artikalighting  2 ปีที่แล้ว

      You can call 1-866-661-9606 Artika customer care and we can assist you.

  • @franktate9873
    @franktate9873 3 ปีที่แล้ว

    If one led goes out will all 5 of the lights get dim or just the one with the bad led ?

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว

      If one LED burns out, the others will still work.

  • @sharonwade2478
    @sharonwade2478 2 ปีที่แล้ว

    Have your omega essence 5 pendant chandelier ever have light bulbs? I have one that I have been waiting to install but it is 4 years old. Do I need to buy light bulbs for it?

    • @artikalighting
      @artikalighting  2 ปีที่แล้ว

      We had a much older light that did have bulbs but all our newer lights had LED lights integrated.

  • @alexisrendon1355
    @alexisrendon1355 3 ปีที่แล้ว

    Hi, I bought the Artika 5 Pendant light .... any tips on how to get the kinks out of the wire lines? Do they go straight after a while or is there something i should do?
    I think using matte threaded wires wod help your product from forming kinks while boxed up
    Thanks for the help

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว

      It should go straight after a while, with the weight of the pendants.

  • @bigrollin
    @bigrollin 3 ปีที่แล้ว

    What about the string? How to sdjust

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว

      There is a clip in the canopy to use to adjust the string.

  • @johnfrank8361
    @johnfrank8361 4 ปีที่แล้ว

    I just picked up this light. The display that I had seen shows a bright light as does this Video. But mine seems yellow and not a bright light. The box says 3000 but perhaps the display is 4000 or 5000. Can I get the light with a 4000 or 5000k

    • @PureSwank
      @PureSwank 4 ปีที่แล้ว

      Bro I literally just bought some and noticed the lights seem yellowish on the box too....where are these daytime lights coming from? I might have to return them......any update?

    • @PureSwank
      @PureSwank 4 ปีที่แล้ว

      I just bought some too and noticed the lights on the box as yellow.....where are they getting these daytime lights from in bright white???

    • @johnfrank8361
      @johnfrank8361 4 ปีที่แล้ว

      I think the display in the store looks brighter because of the other lights surrounding it. I changed the rest of my bulbs to 3000k which is a warm light and it looks fine. Not as bright as I like but it still looks good. You should use two when putting the glass on the lights, I did it by myself but it was tricky. My big fingers didn’t help.

    • @PureSwank
      @PureSwank 4 ปีที่แล้ว

      @@johnfrank8361 I believe the bulbs it comes with are 3000k...you mean 4 or 5k?

    • @johnfrank8361
      @johnfrank8361 4 ปีที่แล้ว

      @@PureSwank yes, 4k or 5k would give a much brighter light.

  • @danielhightower8318
    @danielhightower8318 2 ปีที่แล้ว

    Impossible toget the bubble cylinders straight

    • @artikalighting
      @artikalighting  2 ปีที่แล้ว

      Sorry to hear this. You can reach out to our customer care for assistance.

  • @johnr7048
    @johnr7048 3 ปีที่แล้ว

    Can you cut the dry wall so that it will recess up in the ceiling so that the main plate will be flush with the ceiling??

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว

      Please note we do not recommend to cut the dry wall

  • @HT-ww3zg
    @HT-ww3zg 4 ปีที่แล้ว +1

    Almost impossible to install the glass tubes over the glass rods - the threaded metal rods are only about 1/8" longer that the distance to the outside of the tube, and it makes it nearly impossible to screw on one, let alone 3.
    I have broken two glass tubes already because I am trying to hold the tube, the glass rods are constantly moving in an x,y, and z direction, and then trying to screw in the threaded rod.
    This could all have been alleviated if you had made the threaded rods about 1/4" longer.

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว +1

      You can call 1-866-661-9606 Artika customer care and we can assist you.

    • @RottweilerTailTales
      @RottweilerTailTales ปีที่แล้ว

      @artikalighting I like to replace 3000k lights with day light color on Hologram 4 pendent. Where can I buy?

  • @lolipena8051
    @lolipena8051 4 ปีที่แล้ว +3

    My lights won’t turn on. No clue what could be the issue.

    • @leoreyes8067
      @leoreyes8067 3 ปีที่แล้ว

      Loli Pena, I now have the same issue. Did you find out what the issue is with yours?

    • @lolipena8051
      @lolipena8051 3 ปีที่แล้ว +1

      @@leoreyes8067 yes we did. It was defective. We bought it from Amazon. we returned it and instead went and got one from Home Depot. That one worked fine.

    • @leoreyes8067
      @leoreyes8067 3 ปีที่แล้ว +1

      @Loli Pena, luckily, I was able to fix mine on my own. I guess the wiring got loose. I’m thinking my two youngest children swung the lights which probably loosened the wiring. So, none of my children are allowed to get close to the chandelier. Lesson learned.
      Glad you were able to get a new one that works. :)

    • @lolipena8051
      @lolipena8051 3 ปีที่แล้ว +1

      @@leoreyes8067 we checked all wiring and even bought a new dimmer set up. Nothing. So it had to go back. Thankfully Home Depot took the dimmer back. I’ve learned with lighting, appliances or anything electronic buy it from a location that has a physical store close by. That way if I need to swap things I can do it same day.

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว +2

      You can call 1-866-661-9606 Artika customer care and we can assist you.

  • @CraigStetsonScottsdale
    @CraigStetsonScottsdale 3 ปีที่แล้ว

    How do I change the bulb?

    • @artikalighting
      @artikalighting  3 ปีที่แล้ว

      The bulbs can not be changed as the LED are integrated.

    • @marshall_mma
      @marshall_mma 3 ปีที่แล้ว

      @@artikalighting So we have to buy a new one each time?

    • @sexibrown9118
      @sexibrown9118 2 ปีที่แล้ว

      No reply