i swaped the ecu on my 2005 toyota corolla and wont start, maked the bridge bethween pins 5 and 13, wait 30 minutes and the engine starts whitout problem, leave it running about 10 minutes until learn de idle, now the car runs very good and see very reliable, thanks from Paraguay
Mark - did you do this with a ECU that was not reprogrammed or reflashed. I’m guessing this process is the reflashing process without taking it into a dealership?
Boss I am your big fan and always watching your videos sply electrical videos..... My name is Siddiqui and 35 yeas old and I am Auto technician but try to learn Mach more... Sply from your videos. thank you so much godblasyou
Thanks brother! I just program the immobilized on 08 Scion TC it really help me out and save some money; otherwise I’d had to pay a locksmith guy. Thanks again.
It really is 4 and 13, not 5 and 13. It happens that 4 and 5 are linked together, tied to ground in most models, but if your car has not those two tied together, then 5 and 13 will not work. Anyway, the way you know it is working fine is if the lights in the dash start flashing randomly when you do this. And yes, this will work in most Toyota models from around 1999 to the present. More info here: qcwo.com/technicaldomain/toyota-corolla-immobilizer/
I need to get this done in my toyota venza 2011 3.5 v6 i need to know if i need to reprogram my key before doin the reprogram with the new or Used ECU I swapped???
What is the difference eternal a HV-ECU and what comes stock in the 2008 Scion Xb. Your car and mine have the same motor and I’m guessing very similar ECU’s?
Hey, this is a great video. I changed my ecu and the car won't start. So I will try this tomorrow. But there are some things I'm wondering. First, on my car the P button is not lit up green. It is just off and no matter what gear I put it in, it still won't come on. Second my security light is on and my steering wheel is locked. Will doing this to my Camry hybrid fix those problems and start the car? Thanks in advance.
most videos describe the same procedure but with pins 4 and 13. I followed that procedure on toyota yaris 2005 and it did not work. I wonder if using pins 15 and 5 should work.
@@Arielxx01 No, it did not work. I ended up buying a used ECU but then the key and the ECU did not match and I was not able to start the engine. Eventually I took the old eeprom from the damaged ecu and placed it in the ecu I bought and it started working. I sold that car already :-)
Behind the instrument panel is where my ECU is located and it communicates with the PCM behind the glove box on an '06 Scion. So the chip is actually in the ECU behind instrument panel correct? As I'm describing the ECU that I'm describing behind the instrument panel does that also have the ic900 chip or is it a little different? Thanks a million
hey I was wondering if you can help me uh I have a 2007 Toyota Camry and I would like to know if you can help me up program a new transponder key that I purchase on eBay I've been watching a lot of videos but I haven't seen nobody do a 2007 I like the way you are do your videos I was wondering if you can make a video for 2007 how to program a transponder key that I purchase on eBay
could you please say what volts come from those two ports? Is it positive 10.47 volts at 13 and ground at 5? I am trying to reset the immobiliser on a Toyota fielder with proximity key. The security light keys flashing and the car wont start even though the instrument cluster lights up
+jeromecarfan i faced this problem like you, i replaced new used immobilizer for 2002 land cruiser 4.5 v8 ( not for American market), the scanner couldn't communicate to immobilizer module, i shorted pins 4, 13 for 30 mins but not started . someone told me that this method used only when engine ecu replaced not immobilizer and for only 2004-
trying this on my 2003 camry with the immobilizer. changed the ecu because temperature gauge always stood at the half ways mark even when cold and wouldn't let me car start. put a different ecu now I have to set up the immobilizer system. I'll let you know if it works. don't feel like paying a dealer or locksmith so let's see if this works. have my wire with fuse. I'll let yall know if it works. if it doesn't I think locksmith it is
I did the process on a 2009 Toyota Tundra, the car started, I drove the car for 3 minutes, it turned off by itself and now I have no communication with the ECU, is there any way to recover that ECU and run the process again?
I swap the ecu at my Toyota Celica 2001 how can I program the immobiliser ? I try with bridge and don't start and the immobilaser led blinking red ! I search information of my ecu and found that uses a chip called for immobilaser code !! Thank you
Losing my mind this technique did not work for me on a 02 highlander it seemed like it would but still just a crank and no start after plug and play ecu replacement with a cut key the ecu came with
Will this reprogram the existing computer? We've lost all three keys for the car and hope to program using new keys without paying a zillion dollars...
Tried this on my 2004 GS300 but none of the lights are flashing at all and I'm scared to stick it in any other hole to try it does anybody else have a video that might help for a 2004 GS300 this method is not working
hi!ihave a 2004 toyota rav4,they stolen the PCM,i buy another one when i put it the car start,but when i press the gas pedal its does not respond.what shoud i do to get it works properly?
I'm going through the same procedure you showed in this video and it seems to work on my sienna 2011. waiting 30 min to see how it turns out. You don't know how much I appreciate this. Thanks for sharing your knowledge. YOU ARE AWSOME!!
Hi sir or ma'am, my car corolla 2005 has a code p0012, I replaced spark plugs, new battery, variable timing solenoid, new starter, camshaft sensor, but I found wire connect to variable timing solenoid has 7v power, so it could not turn the variable timing solenoid on, the engine get noise from the VV gear, when I press the gas pedal to 2 rpm or up, the engine no noise, I used to buy a ecu from junk yard, but when I put in, the engine won't start, so I put the old one in, could you help me solve the problem please, thank
Heng Srouch you definitely will need to get ur camshaft gear replace, seem like someone has pressure water washed ur engine before and water must has gone into the coil damage into the camshaft....but I believe the volt supposed to be 5v instead of 7v....u have a electricity problem there......hope this is helpful
Use a Mongoose Pro (J2534) adapter from Drew Technologies. Your issue is the smart key controller primarily. After fixing that issue you will be rewarded with the immobilizer repair.
You are right. It is pins 13 and 4 on some models. For my 2008 Toyota Yaris it was 13 and 4. For anyone needing to program a new ECU just try 4 and 12 or 4 and 13. Whichever one makes the lights blink on the dash is the right combo. The operation failed on my Yaris due to not having an immobilizer at all, but 13 and 4 was the right combo.
hi!ihave a 2004 toyota rav4,they stolen the PCM,i buy another one when i put it the car start,but when i press the gas pedal its does not respond.what shoud i do to get it works properly?l
i swaped the ecu on my 2005 toyota corolla and wont start, maked the bridge bethween pins 5 and 13, wait 30 minutes and the engine starts whitout problem, leave it running about 10 minutes until learn de idle, now the car runs very good and see very reliable, thanks from Paraguay
So you did this after you swapped your ecu with a salvage one and it worked?
Are you sure it was pin 5 and not pin 4? Having trouble with my tacoma
@@worksonjunk I think jumper between 13 and 4
4 and 13 not 5 please
Mark - did you do this with a ECU that was not reprogrammed or reflashed. I’m guessing this process is the reflashing process without taking it into a dealership?
Boss I am your big fan and always watching your videos sply electrical videos..... My name is Siddiqui and 35 yeas old and I am Auto technician but try to learn Mach more... Sply from your videos. thank you so much godblasyou
I replaced my ECU with the used one for my Toyota Tarago 2007 V6 and it work following your instruction. Thank you very much for your video.
Thanks brother! I just program the immobilized on 08 Scion TC it really help me out and save some money; otherwise I’d had to pay a locksmith guy. Thanks again.
Using this video's instructions you were able to reprogram the existing computer to new keys, is that correct?
this actually worked on my 2005 Toyota corolla.. thanks a million..
Awesome video would this work on 06 Scion xB?
It really is 4 and 13, not 5 and 13. It happens that 4 and 5 are linked together, tied to ground in most models, but if your car has not those two tied together, then 5 and 13 will not work. Anyway, the way you know it is working fine is if the lights in the dash start flashing randomly when you do this. And yes, this will work in most Toyota models from around 1999 to the present.
More info here:
qcwo.com/technicaldomain/toyota-corolla-immobilizer/
Exactly Sir!
Hello. Will this work on a 2005 Pontiac Vibe? It has a Toyota ECU
I need to get this done in my toyota venza 2011 3.5 v6 i need to know if i need to reprogram my key before doin the reprogram with the new or Used ECU I swapped???
Btw, is the new ECU in this video that you installed on your car (from another car ) is without it being reprogrammed?
What is the difference eternal a HV-ECU and what comes stock in the 2008 Scion Xb. Your car and mine have the same motor and I’m guessing very similar ECU’s?
thank you
does this method work for all cars
do you changing the eprom or not
thank you againe
Hey, this is a great video. I changed my ecu and the car won't start. So I will try this tomorrow. But there are some things I'm wondering. First, on my car the P button is not lit up green. It is just off and no matter what gear I put it in, it still won't come on. Second my security light is on and my steering wheel is locked. Will doing this to my Camry hybrid fix those problems and start the car? Thanks in advance.
Hi wil it work on honda civic 2.2 diesel year 2007 iam going to change the ECU ?
does this method used only for models 2004- and when only engine ecu replaced ?
How about the vin# how you going to put that in the new ecu??
most videos describe the same procedure but with pins 4 and 13. I followed that procedure on toyota yaris 2005 and it did not work. I wonder if using pins 15 and 5 should work.
did it work?
@@Arielxx01 No, it did not work. I ended up buying a used ECU but then the key and the ECU did not match and I was not able to start the engine. Eventually I took the old eeprom from the damaged ecu and placed it in the ecu I bought and it started working. I sold that car already :-)
@@Arielxx01 yes
Ahh please ignore the last "yes" I thought you were asking if changing the eeprom worked.
Would this procedure program a new key fob (all key lost)?
Does this was on a 2012 Hyundai Accent
No
Hi, just wonder if I can use this method to programme another smart key/fob?
Do you use the same terminals (5 & 13) when reprogramming an 07' Camry SE V6?
+Bryan Baskett i think yes, because both 4,5 are ground pins
Works perfectly!!! Thanks
Can this technique be used for a mazda rx8?
ECM with embolizers built-in you have to do eeprom on ic900 to recognize chip in key or clone it
Behind the instrument panel is where my ECU is located and it communicates with the PCM behind the glove box on an '06 Scion. So the chip is actually in the ECU behind instrument panel correct? As I'm describing the ECU that I'm describing behind the instrument panel does that also have the ic900 chip or is it a little different? Thanks a million
On the older Camry you might have to cut a new key just in case the chip is different on the swap ECU
Hi thanks for your video! I just wondering if we can do the same process on toyota tundra 2007 v8 5.7, 4x4 any ideia plz ??? Thanks bruv
Any idea of how to fix the code lost communication with ecm/pcm on Toyota Prius ?
I’m dealing with a similar lost communication ECM on a 2005 Prius !
How did you end up fixing your problem ?
hey I was wondering if you can help me uh I have a 2007 Toyota Camry and I would like to know if you can help me up program a new transponder key that I purchase on eBay I've been watching a lot of videos but I haven't seen nobody do a 2007 I like the way you are do your videos I was wondering if you can make a video for 2007 how to program a transponder key that I purchase on eBay
could you please say what volts come from those two ports? Is it positive 10.47 volts at 13 and ground at 5? I am trying to reset the immobiliser on a Toyota fielder with proximity key. The security light keys flashing and the car wont start even though the instrument cluster lights up
I'm in the same boat, did it end up working for you?
+jeromecarfan i faced this problem like you, i replaced new used immobilizer for 2002 land cruiser 4.5 v8 ( not for American market), the scanner couldn't communicate to immobilizer module, i shorted pins 4, 13 for 30 mins but not started . someone told me that this method used only when engine ecu replaced not immobilizer and for only 2004-
Hi do you fix your car ???????
Will this method work on a 2010 Toyota Camry non-hybrid? I’m about to install a new ECM
This worked on 2006 Lexus gs300 👍
I have the same problem with the same model lexus 1 question was you power steering out?
would this works wiht 2007 toyota corolla le ?
trying this on my 2003 camry with the immobilizer. changed the ecu because temperature gauge always stood at the half ways mark even when cold and wouldn't let me car start. put a different ecu now I have to set up the immobilizer system. I'll let you know if it works. don't feel like paying a dealer or locksmith so let's see if this works. have my wire with fuse. I'll let yall know if it works. if it doesn't I think locksmith it is
did it worked?
Any updates?
????????
hi what manual are u referring, can u pls advise.
What's the name of the he took Yu using to drive screws
Will this work on a 1st gen Mazda cx-5?
No Toyota Lexus Scion
My subaru impreza 99 doesn’t start. I think the ecu has been changed.. i bought the car 2 days ago.. what can I do? Thank you
Hi. Is Camry 2016 available for model
How does this procedure change to add a second key?
Idk if can help me but need help in my 02 civic ex 1.7 i change my ecu withe the same one but won't start need to bypass the eepromm
I did the process on a 2009 Toyota Tundra, the car started, I drove the car for 3 minutes, it turned off by itself and now I have no communication with the ECU, is there any way to recover that ECU and run the process again?
this will work on 2010 prius
I swap the ecu at my Toyota Celica 2001 how can I program the immobiliser ? I try with bridge and don't start and the immobilaser led blinking red ! I search information of my ecu and found that uses a chip called for immobilaser code !! Thank you
Does this work for a 2013 Yaris?
D Wall yes👍
Hey D wall. Did it worked for your 2013 Yaris ?
Hi there I have 2010 vw cc i replace my car ecu with used ecu same number can I do that on my vw immobilizer
Losing my mind this technique did not work for me on a 02 highlander it seemed like it would but still just a crank and no start after plug and play ecu replacement with a cut key the ecu came with
Right w you, been walking a month
you ever fix it?
What contacts shall I use to do same for 1999 RX300 ?
Will this reprogram the existing computer? We've lost all three keys for the car and hope to program using new keys without paying a zillion dollars...
i want to know this question answer too.
Will this work on a 2000 Honda accord
could this work on 2004 nissan maxima ?
toyota lexus scion only
This works on prius too?
Pins for 2007 tundra 4.7 2wd please ! Should I use the same ???
Hello.
have u had any experience that wants to share ??? thanks
is this work in all toyota hibrid car or not plz reply
Does work on Nissan do you know?
Everyone make sure your car door is closed when doing this job..........close door
Hi a bout Nissan micra Plz 2003. I order use ecu from eBay. I put not start
it will work of 2008 allion and premio.plz help me..
Tried this on my 2004 GS300 but none of the lights are flashing at all and I'm scared to stick it in any other hole to try it does anybody else have a video that might help for a 2004 GS300 this method is not working
I'm doin it right now changed my bad alternator and theft locked me to
Any1 knws how to reset on alphard anh10 ecu?
how do you reprogram your ecu on a 2003 monte carlo ss after swapping it?
michael rayner call a locksmith
I think u need to have your keys programmed
hi!ihave a 2004 toyota rav4,they stolen the PCM,i buy another one when i put it the car start,but when i press the gas pedal its does not respond.what shoud i do to get it works properly?
одджлжждд
Hey I have a 2001 lexus es300 is this the same method
i dont know
No
How's that for a reply.1 year later 🤣
Did it work ?? I have a GS400
could you please show me how to do the same thing to a toyota sienna AWD XLE 2011? Thanks.
I'm going through the same procedure you showed in this video and it seems to work on my sienna 2011. waiting 30 min to see how it turns out. You don't know how much I appreciate this. Thanks for sharing your knowledge. YOU ARE AWSOME!!
Tommy Dalat did it end up working?
Hi sir or ma'am, my car corolla 2005 has a code p0012, I replaced spark plugs, new battery, variable timing solenoid, new starter, camshaft sensor, but I found wire connect to variable timing solenoid has 7v power, so it could not turn the variable timing solenoid on, the engine get noise from the VV gear, when I press the gas pedal to 2 rpm or up, the engine no noise, I used to buy a ecu from junk yard, but when I put in, the engine won't start, so I put the old one in, could you help me solve the problem please, thank
Heng Srouch you definitely will need to get ur camshaft gear replace, seem like someone has pressure water washed ur engine before and water must has gone into the coil damage into the camshaft....but I believe the volt supposed to be 5v instead of 7v....u have a electricity problem there......hope this is helpful
Good job
i need your heip for my Estigma Van Model Number TA-MCR30W-MFSSK-J is wont start.
what is the Amp Fuse Rating?
Use 5 amp fuse. Pins 4 and 13
How do you reprogram a Cadillac
good
I tried this on my 01 Lexus is 300 and it didn't work. Security light continued to blink. And won't start.
Did you have a new ecu or a used one? it doesn't work on an used ECU unless you reflash it first.
Crucel Abreu used
He did said use or new ecu will work!
Use a Mongoose Pro (J2534) adapter from Drew Technologies. Your issue is the smart key controller primarily. After fixing that issue you will be rewarded with the immobilizer repair.
I have a scion 2012 same ecu like you I'll do the same and don't work on me just have a engine light sound on the throtle position
Are you sure its not 13 and 4?
You are right. It is pins 13 and 4 on some models. For my 2008 Toyota Yaris it was 13 and 4. For anyone needing to program a new ECU just try 4 and 12 or 4 and 13. Whichever one makes the lights blink on the dash is the right combo. The operation failed on my Yaris due to not having an immobilizer at all, but 13 and 4 was the right combo.
Thank you
My problem turned out to be fuel pump.
control unit ho mane
my nem Erick shija iam need education end key progm
Why the F does it say (diag vsc)!! This must not be for immobilizer....
лдд
None of this works.
Hi.... I have a lexus is250 v6 F-SPORT ..2010.. is this the same method???? thanks
Will this work for a 04 maxima
hi!ihave a 2004 toyota rav4,they stolen the PCM,i buy another one when i put it the car start,but when i press the gas pedal its does not respond.what shoud i do to get it works properly?l
how do you reprogram your ecu on a 2003 monte carlo ss after swapping it?