Which Utility Knife Blade Is Best? Let's find out! DeWalt, Irwin, Stanley, Husky, Kobalt, Lenox
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2019
- Utility blade knife sharpness test: blade edge integrity and frictional loss using cardboard, drywall, copper pipe and staple. Stanley, Stanley carbide, DeWalt Carbide, Milwaukee, Masterforce, Craftsman, Lenox, Husky, Kobalt, Hyper Tough, and Irwin tested. I highly recommend 2 blades, one for value and the other stands out as the best but it does cost the most.
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
DeWalt Carbide: amzn.to/2VIbH5d
Stanley Carbide: amzn.to/34okz1Y
Stanley: amzn.to/3hn8j5m
Milwaukee: amzn.to/3laCPSj
Craftsman: amzn.to/2QgH68w
Lenox: amzn.to/3glh9PK
Husky: amzn.to/49UJkSW
Kobalt: amzn.to/32l5JH4
Irwin: amzn.to/31kn43r
Hyper Tough: www.walmart.com/ip/Hyper-Toug...
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/31aince
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC - แนวปฏิบัติและการใช้ชีวิต
Thanks to everyone who requested this one and please let me know if you'd like a round 2 showdown along with which brands to test. Thanks again, Todd
Products Tested In This Video (in no particular order):
DeWalt Carbide: amzn.to/3l9klSc
Stanley Carbide: amzn.to/34okz1Y
Stanley: amzn.to/3hn8j5m
Milwaukee: amzn.to/3laCPSj
Craftsman: amzn.to/2QgH68w
Lenox: amzn.to/3glh9PK
Husky: amzn.to/3ghhGT2
Kobalt: amzn.to/32l5JH4
Irwin: amzn.to/31kn43r
Hyper Tough: www.walmart.com/ip/Hyper-Tough-Heavy-Duty-Utility-Blades-5-Count/119784690
Great Test.. Could you include maybe some of the Fiskar blades? I have the titanium blades from fiskar but I think they may be discontinued?
was wondering if you have ever used olfa utility blades
Like to see difference between dewalt regular vs their 3x, 5x, and 10x longer lasting blade.
🎅🛋🐼✊🏿🇺🇲
#RedBeardsCuckNation
This is great!
Can you please test and see if ceramic blades are better that traditional metal razor blades? They sell the “slice” brand ceramic blades on Amazon
I just picked up a 50 pack of Lenox carbide edge. I assume it would be comparable to the dewalt but only one way to find out. 🤙
This test was not cheap and took time to complete. Hats off to Project Farm.
Thank you!
@@ProjectFarm Your tests without complex and expensive machines are amazing. Some of your solutions to testing while having reasonable control of variables is very impressive! Always entertaining.
@Steve They are!
@Sometimes I do things They can always fast forward to the charts where he shows the comparisons.
Thanks for these videos, they have lead to many purchases that I'm quite happy with!!!
Don’t forget guys, this guy is always unsponsored, and spends a lot of money on each of these videos. He’s saving us money by making them so we should remember that this guy has a patreon
Thank you very much!
Yes, it is the main reason I love this channel
chris bro he spend at least 2days for a video of less than 800k meaning 800dollars. And he spend maybe half of it in cost. 200per day is not enough you should support.
Chris, Must be a Democrat. Someone helps us at their expense. They in turn make money from their hard work and dedication. Suddenly you’re upset because someone pointed out that he’s hard-working, dedicated to his goals and puts his own money into these tests. When we get off the couch and work, we have something bigger than success. We have significance..... whew that was the most aggressive comment I’ve ever written.
chris TH-camrs don’t make as much as you think. And even if he does make enough to cover the stuff he buys, what about the money for his efforts? You wouldn’t make someone work for you for free would you?
I'll bet the manufacturers of all the products you've tested, never dreamed there products would be scrutinized so thoroughly on TH-cam. It's great for the consumer. I hope you're being rewarded for all the hard work you put into everything you test. You deserve it.
Thanks!
But, that keeps them honest. You can't just say you're going to "last 10 times as long" or "our blades are 10 times as sharp" without Todd saying "we're going to test that"
I didn't think there was any significant difference in these, but after watching your vid, I see that there is. I went out and bought a huge pack of DeWalt blades. WOW - those things are durable!! Been using them for a drywall job, and I'm amazed how long they are lasting. Thanks so much for this one.
You are welcome! Thanks for sharing.
Wonder when companies are going to start saying “ Project farm approved “ on packaging.
lol. Thank you!
Then he can sue for using his name without permission. 😂
That’s awesome
"P.F. Says" will replace J.D. Power
They must pay a fee for that!
Project farm : releases a video
Every know manufacturer: *holds breath*.
Thank you for your 100% unbiased videos 🙏
Thank you for the feedback.
A TH-camr that really makes manufacturers nervous is the Lock Picking Lawyer. I saw an article where Amazon had pulled an Amazon brand small pistol safe after an LPL video showed how easy it was to bypass the locking mechanism.
@@John-tx1wk it is so good to have an honest source of information that hasn't been bought by corporate dollars.
@@John-tx1wk kumpla free dr99 9o det r f ty tvmo wojna iii⁹p nip p lu ľ u ko ko ko gt 5i 700zł
Honestly, this is the best tool review channel on youtube. Not only are these tests really fun, but extremely detailed and informational. Hats off to you!
Thank you very much!
No doubt about it! Every time I watch an episode, I find myself so bummed, just anxious for the next episode! Great reviews! Just love them and they’re very detailed, too!
Hello thanks for reviewing. I’m a drywaller and occassionally score metal studs. I’ve always bought husky or kobalt 2 for one packs and they’ll last me a year. A bunch of guys I work with shell out for Lenox and I can see your data proves it. New to your channel, thank you for the great reviews. This one in particular you’re helping a lot of working class hero’s out by your dedicated channel
You are welcome! Thanks for sharing.
Hero?
@@snakeinthegrak8969 The hero we need or the one we deserve?
@@huejanus5505 well building and fixing shit is what I do for a living and hero isn't a title any of us deserve.
Im a plasterer and i use Lennox blades for mostly cutting mesh tape and blown out boxes. They just seem to last longer for me. I have yet to find a utility blade that doesn't chip when it hits a drywall screw.
You keep hanging it and ill cover it up.
My Monday evening de-stresser 😌
Awesome! Always glad to be a part of making Mondays better for everyone!
Same
I misread that as "de-greaser".
@@Richard-Freeman so did i
It's Tuesday morning here :D
As an engineer I can't appreciate enough your attention to details, custom test rigs and data compilation. Not to mention the time spent...
Great job as usual.
Thank you very much!
You're welcome, it is a well deserved praise. Will be waiting for the next video.
@@ProjectFarm do you test a number of blades though from each group? its hard to call it statistically significant data without a large sample size
I definitely appreciate the effort of his testing different thing, and his dedication to funding everything himself and being open with his results, now if the rest of the consumers of products followed his lead, the marketers of higher priced inferior products would have to make a choice... either put up, or shut up then shut their doors for good!
@@jacobwinters2593 You'd think that these companies would have quality control standards to make each batch of blades similar in quality and hardness. I'd call his data about as statistically significant as you can get without wasting hundreds of dollars to get a lower significance level. I'd probably avoid buying a certain brand if I knew they had poor enough quality control to warrant larger sample sizes in a test like this anyways.
I usually buy these in 100 packs and it seems I go through a lot of them, because they just become frustrating (and dangerous!) after a short while of use. But I am down to the last 5 and thought "I'll check Project Farm" before buying my next 100 pack. You never fail! Thanks.
You are welcome!
so which one did you get?
I'm not sure why I watched this video, but I guess its because it's project farm. I still have about 30 blades left from the cheap blades that came with my blade handles. 30 blades last me 2 years...lol. Yep, I am addicted to this channel.
@@cdsersd2d I use a lot of blades because in the work I do with utility knives I cut a lot of corrugated cardboard. I was interested in the economics of whether a more expensive blade may actually save me money.
It's certainly not a life changing expense...so I guess I am just addicted to this channel also. 😁
Easily one of the best channels on the platform. I'm so impressed with how thoroughly he tests everything. Such dedication is rarely seen.
Thanks!
So true! You can see his dedication to the craft.
The Milwaukee “iron carbide” blades... also known as steel
Thank you
Lmao
Hahaha the marketing is on fire
What?!? Steel is iron with a few percent carbon added?!???? LOL
I tried these the other day. Tbh, as far as "sharpness" goes, they were not as good as much cheaper brands, however they are definitely more durable.
I think you’ve found your calling, you’re fantastic at making these kind of videos! Keep up the good work brother!
Thank you very much!
Project Farm, agree with Jason, you keep putting out great content! Have a video idea to consider: which chain saw sharpening technique is best? round file vs square file and hand file vs machine file
It’s absolutely amazing how much time he spends making videos not just editing but also creating the content itself. It’s also fascinating to me how he builds his own test equipment and these devices that re-create the same motions. GREAT WORK !!! I really enjoy your videos. I find myself watching your videos and then making a decision in purchasing something. Sometimes at the store before I buy some thing I look on your channel to see if you have done a video on it yet.
I appreciate that!
I'm on the same page now
Your videos and evaluations have affected my purchases of many different products. Love your videos!
These reviews have influenced my purchases also!!
It has taken buying stuff from just a crapshoot to knowing what you're getting!
So true! You can see his dedication to the craft.
Forgot to mention how I love and value your concise presentations. Max relevant info in the least amount of time. Priceless!!!
Thanks so much!
Man, I know you're reading this, so I just wanted to say. This is simply, the best channel on TH-cam. I know you won't believe it, but trust me you are. Most of the time I don't even have a use for the subject of the video but I'm just mesmerized by your experiments. Keep up the great work & thank you for the awesome vids!
Thank you very much for the positive comments. It means a lot and keeps me motivated to keep testing more products!
Erich amen to that man, I have learned so much from this guy it’s unreal, I’m able to help suggest products to friends and family with great confidence now and I have PF to thank for that
Yes it is! Give Hydraulic press channel a try
The jigs you come up with just straight up inspiring. That dulling jig is the best designed absurdly specific thing I have seen all year easily
I hope people understand the effort that went into this video. Between designing the test jigs, graphs, etc., and editing everything to flow smoothly, three cheers to Project Farm!
Thanks for that!
Laughable Moments for some reason, a lot of people hate on him. It’s obvious that he’s putting lots of effort into these.
here, here
@@ProjectFarm you do a great job of unbiased testing, which has a real benefit to we the viewers..Thank you
i think he is awesome. lots of cool test from tools to oils ect. can learn alot here. i try to watch all his videos
Todd, I am continuously amazed at the range and quality of your tests. Every time I click on one of your videos I learn something.
Great to hear!
Love this channel
You the man, My Dude. Really appreciate all the video's helping us not get bamboozled.
Thanks and you are welcome!
In terms of overall quality, this is quite possibly the best channel on TH-cam. This guy _devises_ an effective and unbiased method for comparing all types of things, takes no sponsors, instead spending his own money. The man could start his own standards organization but instead he spends hours and hours making these videos for us.
Thank you Project Farm
i think im asensual
I imagine his shop is filled with lots of strange handmade testing devices
He probably had some pretty fancy torture devices in his bomb shelter too.
It Won't Hurt for Long
WTF? You’re a weirdo.
I imagine his shop is filled with destroyed lawnmower engines.
A friend of mine got me a dewalt utility knife he found on clearance. I was amazed how durable the blades that came with it held up and stayed sharp. I would buy them again.
The 50 pack of carbides is worth every penny.
I watch these before I go to sleep, a majority of these brands don't exist in my country, but I'll still watch the video and leave a comment for the algorythm
2:02 The Milwaukee says it has "carbides dispersed in a steel matrix" which is literally a description of high carbon steel, it's interesting how brands will use technical jargon to convince you that their product is somehow superior or better engineered
You'd hope that they mean carbides other than iron (cementite). But even that hope isn't much, as that again describes most alloys (e.g. Cr-V).
"Our cars come with adjustable windows!"...
@@T3sl4 In some cases certain types of carbides can do more harm than good if they are too large too. I've found a lot of cheap stainless steel won't hold an edge or even take a decent edge because the chromium/carbides are so coarse they chip out and leave a rough edge, or at least that is my understanding of what's happening at a microscopic level
You also have to think of heat treat. A steel can have perfectly adequate chemistry, but have a suboptimal heat treatment. This can cause many problems, including the issues you described. Chromium carbides are only one possible carbide, you also have vanadium, tungsten...none of them worth anything if the steel has a junk heat treatment!
As for utility blades...I have a 100 pack of the husky. They do the job. You can always sharpen them if you really want to get your money's worth!
@@T3sl4 I've heard of those, do they come with a door glass regulator or is it a separate purchase ?
@@TheBrewjo it's a separate purchase and good luck getting the door panel off without breaking all the fastener clips. We make sure to engineer them as single use, which can only be sources from the dealer at a cost of $15 each
This is one of the few channels you actually see actively seeking and implementing feedback, it's great to see. I saw a comment last video about adding more labels to the graphs and it's already done today. Love the videos, keep up the great work
Thank you very much! Yes, I read as many comments as possible and implement suggestions. It helps me improve!
Project Farm is by far the most professional youtuber.
@@davehimlin2374 You must be hanging with a bad crowd.
I agree, PF is a top notch channel, and honestly, I can't understand how he doesn't have ~5 million subscribers like a lot of these other channels. MinutePhysics - 4.84 million, ChrisFix - 5.4 million, SmarterEveryDay - 7.47 million, EngineeringExplained - 2.47 million. These are some of my favorites and Project Farm is easily on their level as far as providing good information and even more involved with his subscribers. We need to all help boost his subs!
> I saw a comment last video about adding more labels to the graphs and it's already done today
That was me :)
Already made another comment to thank him for it, but thank you again here.
I would love to see a test like this for break-away boxcutter blades, because at least in Norway that seems to be the most popular. I've always used original Olfa Ultra-Sharp/Excel Black blades, but it would be great to see what other brands can do!
Thanks for the video idea.
@@ProjectFarmyes please do a video of snap off blades! I use Olfa Black
I've been paying extra because I thought I was getting the best for almost a year at this point, I was paying even more mark-up just to buy them on Amazon at just over $1 a blade 🤡 I'll start getting DeWalt blades going forward
You can get the DeWalt carbides for $0.45 each at home Depot if you order a 50 count
Thanks for the feedback.
If you get the cheapest blades, you can swap them out faster and have a sharper blade at all times. In this test, cheap is the winner.
DeWalt it's okay for drywall I can cut like 30 sheets from each side of the blade ...
@@vipahman I think it really comes down to how much your using your blade. If you just have it around for once in a while type of thing then yea cheapest is best swap a new one out every time. If you have hundreds of feet of material to cut in a day then swapping a dull blade out every 2 minutes is going to be really irritating and you would rather have the 5x more costly blade that lasted longer.
That final test really shows it, the dull Dewalt is almost as sharp as the last place of the brand new blades. I'm gonna stick with Irwin personally, they rate right in the middle of the pack which is fine and they are incredibly cheap when you buy the 100 pack.
Can we appreciate his efforts? Like holy cow he did all of that, just to enlighten us
Thank you!
This test is absolutely accurate. I am constantly using blades at work from cutting jackets and sheathing off of copper or fiber optic cables, to sharpening carpenter pencils. I have probably used every blade out there, I can honestly say that I have stuck with the new DeWalt Carbide due to me not having to change it out as often. I was impressed with the Milwaukee at first but I noticed the chipped edges came up a lot. Watching this video I was able to make accurate calls on which blades were going to outperform others and this test was spot on lol.
Thank you very much!
Think a blade can get to sharp and have no longevity to it i find the same if i sharpen my chisels to much they go dull quicker
I have a 100 pack of Milwaukee blades in my desk at work and I can't wait until I use them all up...the edges roll over and chip easier than any blades I've used before. I'll have to try some of the DeWalt carbide blades at some point.
Carpet install folks use Orcon trimmer blades.. 👍
They can be resharpened but No one ever would because they are so cheap.
I’m stuck in a loop of watching your videos. Just bought my first house about a year ago and your videos have helped me make decisions. Thanks for your videos and especially your attention to detail.
That is awesome! Thanks!
Awesome video! Thank you for taking the time to put this together. The equipment you invested in and designed was very cleaver and made for a fair and accurate test. Very well done and professional.
Thanks and you are welcome!
It sound like I’m listening to a sport commentator when he tests the sharpness
You should watch his videos on engine oil testing.
I guess the addictive to watch his channel come from the way he presented things.
Can you do a recap "best of" in 2019 to go over all your top performers of the different items you tested?
Thank you for the video idea!
2nd this!
I agree. A year end review of the best items. I'd watch that in a heartbeat
Plz do!!!
Yup I 3rd that. By the way, is there a work gloves video on the way?
I really have a lot of respect for this guy and the channel as a whole! Thanks for the help selecting the best product in every category!
I appreciate that!
I enjoy seeing the test rigs you come up with just as much as I enjoy the reviews themselves. Kudos!
Thank you very much!
I have to say if you buy in bulk you SEVERELY drop the cost per blade though. I love the Irwin blades, and buy them in packs of 100...which ends up costing about 6-7 cents per blade.
Thanks for sharing.
Duwalt is better than Irwin. Irwin sucks. I wouldn’t care if I got them for 6 or 7 cents. I’d chuck them in the trash. Duwalt you can buy in bulk too, it’s a little more expensive but from my experience (I’m a contractor) you also won’t be changing them as often.
The real cost of the blades is walking around trying to find where the hell you have all your spare blades.
The blade is unbreakable and the cutting edge holds up. The value pack is the way to go
@@kevind1865 How true, how true!!
Its 1240 AM and Im binge watching your videos instead of sleeping. So addicting, very informative and unbiased. Top grade channel on TH-cam.
Thank you!
Well said
This guy make are with those reviews, i never seen such high end in depth professional reviews. Well done sir, you deserve my likes and sub. 👏👏👏
Thanks for watching and subscribing!
Thank you so much for creating a test and making a video with this format! I wish other youtubers would test things this way. Thank you also for adding the links to the blades so I don't have to go back through the video! Merry Christmas!
You are so welcome! Merry Christmas!
Never thought I'd be taking 11 minutes of my life to compare utility knife blades, but here I am glued to my screen...
Thank you!
Put it in 1.5X
@@magnodvd1971 Todd already has a relatively high voice. Dude would sound like a chipmunk...
@@greghuth9580 Then he could sing on a Christmas album like Alvin and company! I'd buy it!
It was literally yesterday that I was replacing the blades in my utility knife after chopping up a bunch of cardboard, when I thought to myself "that Project Farm channel should do a video on the best utility blades." Funny how that works.
PulseCrisisMusic same happened to me with the car batteries!
I've been noticing this kind of thing a lot. I think the internet makes people psychic.
If you really want a good cut through cardboard try an electric knife with serrated blades. Runs through it like hot knife through butter. I have been doing this for 2 years.
I realize how much work is involved in your tests. Thanks for the upload.
You are welcome!
Thank you for all of the tremendous effort in comparing the wide assortment of tools and products! This information eliminates countless hours (and frustration with sub-par goods) for your followers!
You are welcome!
A lot of us work outdoors and this time of the year it gets cold! I have a suggestion. Compare thermal mugs' ability to keep stuff HOT when it's cold outside! ;)
Great video suggestion! Thank you
great idea but the opposite is also applicable for example on this week is going above 45 degrees celcius (113f) so i would like a test for keeping ice water cold
Thats a great suggestion! Would love to see that! Then he can use them as xmas gifts when hes done 👌🏻
@@dominicbeltz9057 It seems that the Tervis (plastic) is great at keeping things cold in the summer but fails miserably in the winter. A cheap stainless one from Walmart keeps my tea quite warm even after sitting in a cold truck for hours.
That's actually a cool suggestion. Especially considering the big spread in how much those mugs/cups cost. Some require a loan shark and a kidney function check for collateral.
So not even a minute in and I can already tell this is going to be a good comparison, the fact Project Farm has decided to use an actual sharpness tester instead of just newspaper really says how much effort he's put into the video straight away. All newspaper is good for testing is whether or not the edge is the right angle for cutting newspaper, once a blade gets used, that "perfect" edge starts getting lost and cutting paper doesn't give the information you actually want.
Thank you!
Good point, its a bit of a silly fad and doesn't prove anything.
You are right, this is a professional tester he used!
I love the different test rigs you put together. All your videos are so well thought out.
Thank you very much!
This is what these product review channels strive to be like. This guy is too good.
Thanks!
Again I’m impressed at how well you go about testing different products. “How can he effectively test razor blades?”
“Oh...a sharpness tester and weighted sled, of course!”
Keep up the good work!
Thank you!
A cheap razor blade that stays sharp a long time is a great test idea.
Now to figure out which ones dont disappear as soon as you set them down.
Yes, the 5 finger discount problem.
That's why I use a folding box blade with a clip, and put right back in my front pocket soon as I'm finished with it.
@@CommodoreFan64 I tell myself I do that too, but it always still manages to disappear on me when I really need it.
Just like a 10 mm socket. Hey @projectfarm, that's a video idea, what 10mm socket remains longest lol
Right, they'll steal'em for sure. I always gotta remember to put it in my back pocket.
OMG I can't believe the amount of work, expense, and attention to detail you put into this. Amazing!
Thank you so much!
Some amazing, mind boggling patience you have for doing the tests you do on this channel.
Thanks!
Some University should give this guy an honorary degree. He uses more engineering, science, math, and instructional design than most college courses.
Wow, thanks!
No ....schools are now teaching that Democrats are telling the truth
I disagree. He uses common sense. Which is not taught in schools.
@@stu-oe5sg I see what you did there.
I agree 100% they are teaching our kids that our national anthem is not worthy of standing up and facing the flag and the Democrats are liars
I make a lot of my purchases based on your test, thanks for doing these videos!
Thank you very much! I'm glad the videos are helping viewers find the best products!
Quality info with transparent testing.
I appreciate the density - no waiting of my time.
My employer has no coherent policy and we end up with assorted low quality stuff, so I've been looking for a few critical, low cost items to just buy myself to avoid the annoying unpredictability.
Thanks much!
You are welcome!
You should open up a store with all of your "PF APPROVED" items you tested. I would definitely buy. Biggest thumbs up for not being sponsored so the comparisons are fair. Great job
Thank you for the feedback
Seeing the test jigs is one of my favorite things about watching your testing process. Good stuff!
Thank you for the feedback.
Can I just say that we admire You sir. And we’re lucky to have You on TH-cam? Hell of a job! Hell of a channel!
Thanks so much!
This is a level of rigour brought to testing that just makes me happy. Thorough. My compliments, sir!
Wow, thank you!
I love how you take out the subjectivity out of your tests. I had no idea they made that blade sharpness indicator. That was impressive to see. Great job as always!
Thank you
Made in USA!*
*With global materials
Arbiter099 America gets a TON of thin gauge steel from China
at least they are honest; id buy them for that
theol31 only a ton?
@@ayrendraganas8686 I mean they have to be, its the law..Bet if it wasn't none of them would say it while still keeping the American flag on their packaging.
They stuff the blades into the blister pack in a warehouse in Detroit.
It was great to cover different applications and best blades for each. For breaking down cardboard boxes, i use a 4in micro serrated knife. Kind of like a file or rasp on each side of the blade.
I love your videos! What I love most about them is seeing all of the nifty gauges and home made testing rigs you often improvise, as you say, "Macguyvered" together!
Thank you very much!
"Made in the US with global materials" is marketing speak for "Chinese blades packaged by a machine contracted out by a half dozen companies".
You're wrong.
it probably means cutting & grinding from sheet metal was done on US soil.
That is not how I'd interpret it. As far as the source of steels, India would have close to the same probability as China as being the source. Where we have to worry is when implanted medical hardware is not tracked well from the source.
@@davidk7544 Well China has the biggest usable iron ore productions and it is pretty well know that Japan and the US are big customers.
I work at General Motors, almost every part and product is imported from China/Mexico/Canada. It's just "assembled in the USA" which means they can claim it's made in the USA.
“In today’s episode, we find out which utility blade cuts through this lawnmower engine”
Lawnmowers : DAMNIT
"In today's episode, we find out how utility blades work as a lubricant in this small engine. Can you use utility blades instead of oil in a pinch if you're stranded in the woods? Let's find out!"
lol. I thought about it!
That is hilarious lol
I definitely laughed out loud.
😆
This is a reviewer I can really get behind. Great consistent testing, I love it. Keep it up!
Thanks, will do!
I f finally found the video that you bought the sharpness test for! Fascinating piece of equipment.
I'd like to see a behind-the-scenes video to watch the process of designing and building your test jigs! Always impressed!
Thank you for the video idea!
I know. This dudes work ethic is through the roof
“Next we will be testing these blades on this old lawnmower...”
genuinely laughed at this
lol. I actually did think about it!
That lawnmower has been through a lot. Haha
Will a lawnmower run on razor blades.
Yes. How about a few blades in the cylinder with the clear head on it.
Speaking of which, I have a bad story. When I was young I would ne mowing the yard. It would be toad season and there would be thousands of baby toads hoping around. I would pick one up and send it for a ride though the engine. I would remove the filler and stick them in the intake. Then I would see a few sparks shoot out the exhaust and with little toad legs v etc. It was awesome and a bit cruel. But done in the name of science. Would love to see that with the clear cylinder head.
Cool test jig..appreciate your work,money and time
Thanks! Thanks for the suggestion.
Best channel on TH-cam, thanks for doing all these tests, they are super helpful.
Thanks! You are welcome! Glad to hear!
This is the most amazing thorough razor blade video I've ever witnessed, thank you for this!!
Thank you very much!
Same here. Greatest razor blade vid ever. I mean, I assume, since it's the only razor blade video I've ever seen.
@@mattrondeau7466 true it is the only one I've ever seen, but I'll never need to watch any other one ever. 😂
I can't believe the work that is put into each and every video, its amazing. No clickbait, no forcing you to subscribe, like, turn notifications on, buy their merch, follow all their social medias. Just a good old TH-cam video.
Thank you very much!
YES ,AMEN !!!!! REALLY GOOD VIDEO !!
Project Farm provides the most honest unbiased product reviews. Thank You! You are spending lots of hours, money and engineering to help the community. Hats of dude, keep testing!
Thanks, will do!
thank you for your very honest reviews, accurate information presented in a clear, concise, easily understandable form, with real life scenarios.
Thanks so much!
I'd like to see your take on a sharpening tool comparison.
Great suggestion! I'll do it
Yes!!
@@ProjectFarm As a knife guy, I'm looking forward to seeing an outsider's perspective :)
Spyderco Sharpmaker... (V-angle style, ceramic rods ) Easy, relatively safe... portable.. Comes with medium and fine grit, but has an ultra fine grit available, about $60...
Scott Crawford if he wants to test one of those I’ll send him mine. I’ve not got the patience for it. I went with a 1x30 and will never do it by hand again.
It almost sounds like you're calling a horse race when reporting the scores after the cardboard cuts 🤣🤣💀
Thank you!
@@ProjectFarm
You should go to the race track and do all your work there.
I know right was gonna make bets.
You are doing the world a great service with these comparison videos.
Thanks!
been using the stanley carbide for years. was happy to see it up there with the big boys
Thanks for the feedback.
The dry wall test was the most needed for me as i hang it for a living
Thank you for the feedback
Didn't need to watch this to know Stanley would be the winner. 10+ years of tile work proved it to me. Excellent video!
Thanks so much!
There's a reason that here in the UK they're just generically called Stanley Knifes.
.... But Stanley wasn't the winner
@@dalyclose7815 Was going to say the same thing. Dewalt was. Stanley was a good value blade though. And for cardboard specifically, Lennox seems to be the best.
Yeah Stanley didn't win but the standard are the best bang-for-the-buck, I use Stanley standard because they sell them everywhere and they're cheap. I haven't tried the FatMax carbide blades.
Awesome test, watching other videos of yours as well!
Thank you!
Your videos are amazing and I really appreciate you and the expenses you have doing these comparisons.... Thank you for your help.
You are so welcome!
New label: "PF Approved", the true of the things.
Thank you!!
What is PF APPROVED ????
@@ShelliLoop Project Farm Approved
Definitely make it easier to by the right thing first every time!!!
I've changed a few items or looked for ones I've seen tested. Makes a difference
binge watch 20 of these episodes while getting zooted
I was going to comment on another video of yours that I'd love to see a utility comparison. Low and behold you already have one, awesome work dude
Thanks!
Thanks project farm, for another amazing video!
You are welcome!
You should test gunk and gum removers like Goof off and the citrus based removers. thanks for the great content
Thank you for the video idea!
Goof off blue monster etc.
I use 3M General Purpose Adhesive Cleaner.
Citrol. Game over
I'd love to see this. Because I've never had goof off work like expected
Only on Project Farm do we see staple being stapled with another set of staples! (9:04)
lol. Thank you!
What a great video. I particularly enjoy the style of commentary
Glad you enjoyed!
Another review and test I didn't know I needed... but I am grateful... great test jigs, and really good logic... thanks and duly noted... i enjoyed watching and becoming better informed
Thanks!
Glad to see my test recommendation made it to a video!
Thank you for recommending this one and sorry it took so long. I wanted to get the testing done right
I also recommended this. Great minds think alike! I'm impressed with the testing.
I dont mind the wait as long as we get quality tests and results. Well worth it, great job @Project Farm
Gotta love the hype on packages - "Two faceted" - like every utility knife blade
Like how Folger's coffee is "Mountain grown". All coffee is grown only on mountains.
Thank you
Now with edge
Made in America with Global Products... classic :)
I absolutely love the sound of cutting cardboard. thank you for the upload
You're welcome 😊
Thanks so much for your great videos. You have become my go to before I purchase items. I love the way you come up with the creative testing methods.
This is one of my favorite channels to watch on You tube. When I get bored waiting to load some where since I am truck driver I just watch the Project Farm channel. Great videos with lost of useful knowledge. Keep up the great work.
Thank you very much!
Not all hero’s wear capes. You are so good at this! Thank you!
Thank you!
Some wear cowls.
This man is a lowkey engineer.. building all these contraptions from scratch.. i subscribed just now. :)
Thanks for watching and subscribing!
Awesome durability test! Exactly the type of information I was looking for. Thanks!
Glad it was helpful!